ami(4) in 5.0 doesn't work with bigmem. Try -current.
dev/ic/ami.c:
----------------------------
revision 1.221
date: 2011/10/05 06:41:30; author: dlg; state: Exp; lines: +58 -36
ami_drv_inq bus_dmamap_loads the inquiry buffer, so that buffer has to be
under 4g now. this moves the inqbufs off the stack to dma_alloc/dma_free.
reported by and fix tested by henning@
ok henning@
----------------------------
On 2011/11/25 07:02, Bob Beck wrote:
> Please get a full traceback for us. Without that your report is
> fascinating, but we probably
> can't find the bug.
>
> On 24 November 2011 15:53, Olivier Burelli <oliv...@burelli.fr> wrote:
>
> > hello,
> >
> > sorry for my bad english.
> >
> > after 3 upgrade succesfull i decided a fresh install for OpenBSD-5.0 on
> > my PC :
> >
> > Intel E8200 dual core 2, 4GB ram.
> > RAID : Intel SRCS16 (ami) with 3 Western digital raptor (stripping)
> >
> >
> >
> > i boot OpenBSD-5.0-amd64 install Cd.
> >
> > installation started
> > [...]
> > Disk Setup succesfull.
> > [...]
> > fdisk and Disklabel sucessfull.
> > [...]
> > Installation media and file set succesfful.
> > [...]
> >
> >
> > Saving configuration files...done.
> > Generating initial host.random file...done.
> > Making all device nodes...done.
> >
> >
> > PANIC: Non dma-reachable buffer at curraddr 0x12e5e3ba0(raw)
> > syncing disk... 173 172 134 68 4 done
> >
> >
> > I have installed succesfully later
> >
> > - OpenBSD-i386 with 4 096 MB
> > - OpenBSD-amd64 with 3072 MB
> >
> >
> > best regards,
> >
> > Olivier.
> >
> > **************************************************************************
> >
> > dmesg : OpenBSD-amd64 with 4096 MB after boot cd and choose boot
> > sd2a:/bsd :
> >
> > **************************************************************************
> >
> > OpenBSD 5.0 (RAMDISK_CD) #53: Wed Aug 17 10:17:43 MDT 2011
> > dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
> > real mem = 4293132288 (4094MB)
> > avail mem = 4167008256 (3973MB)
> > mainbus0 at root
> > bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf06f0 (73 entries)
> > bios0: vendor American Megatrends Inc. version "1004" date 02/22/2008
> > bios0: ASUSTeK Computer INC. P5K WS
> > acpi0 at bios0: rev 2
> > acpi0: sleep states S0 S1 S3 S4 S5
> > acpi0: tables DSDT FACP APIC MCFG OEMB HPET
> > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> > cpu0 at mainbus0: apid 0 (boot processor)
> > cpu0: Intel(R) Core(TM)2 Duo CPU E8200 @ 2.66GHz, 2671.91 MHz
> > cpu0:
> >
> > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,NXE,LONG
> > cpu0: 6MB 64b/line 16-way L2 cache cpu0: apic clock running at 333MHz
> > cpu at mainbus0: not configured
> > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
> > ioapic1 at mainbus0: apid 3 pa 0xfec10000, version ff, 256 pins
> > ioapic1: misconfigured as apic 15, can't remap to apid 3
> > acpiprt0 at acpi0: bus 0 (PCI0)
> > acpiprt1 at acpi0: bus 1 (P0P2)
> > acpiprt2 at acpi0: bus 8 (P0P1)
> > acpiprt3 at acpi0: bus 7 (P0P4)
> > acpiprt4 at acpi0: bus -1 (P0P5)
> > acpiprt5 at acpi0: bus 4 (P0P6)
> > acpiprt6 at acpi0: bus 6 (PXHA)
> > acpiprt7 at acpi0: bus 3 (P0P7)
> > acpiprt8 at acpi0: bus -1 (P0P8)
> > acpiprt9 at acpi0: bus 2 (P0P9)
> > pci0 at mainbus0 bus 0
> > pchb0 at pci0 dev 0 function 0 "Intel 82G33 Host" rev 0x02
> > ppb0 at pci0 dev 1 function 0 "Intel 82G33 PCIE" rev 0x02: msi
> > pci1 at ppb0 bus 1
> > vga1 at pci1 dev 0 function 0 "NVIDIA GeForce 8800 GTS" rev 0xa2
> > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> > uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x02: apic 2 int
> > 16 uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x02: apic 2
> > int 21 uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x02:
> > apic 2 int 18 ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev
> > 0x02: apic 2 int 18 usb0 at ehci0: USB revision 2.0
> > uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> > "Intel 82801I HD Audio" rev 0x02 at pci0 dev 27 function 0 not
> > configured ppb1 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x02:
> > msi pci2 at ppb1 bus 7
> > ppb2 at pci0 dev 28 function 2 "Intel 82801I PCIE" rev 0x02: msi
> > pci3 at ppb2 bus 4
> > ppb3 at pci3 dev 0 function 0 "NEC PCIE-PCIX" rev 0x06
> > pci4 at ppb3 bus 6
> > ami0 at pci4 dev 1 function 0 "Symbios Logic MegaRAID" rev 0x01: apic 2
> > int 19 ami0: Intel RAID SRCS16, 32b, FW 713S, BIOS vG401, 64MB RAM
> > ami0: 1 channels, 0 FC loops, 4 logical drives
> > scsibus0 at ami0: 40 targets
> > sd0 at scsibus0 targ 0 lun 0: <AMI, Host drive #00, > SCSI2 0/direct
> > fixed sd0: 39999MB, 512 bytes/sector, 81917952 sectors
> > sd1 at scsibus0 targ 1 lun 0: <AMI, Host drive #01, > SCSI2 0/direct
> > fixed sd1: 129999MB, 512 bytes/sector, 266237952 sectors
> > sd2 at scsibus0 targ 2 lun 0: <AMI, Host drive #02, > SCSI2 0/direct
> > fixed sd2: 19998MB, 512 bytes/sector, 40955904 sectors
> > sd3 at scsibus0 targ 3 lun 0: <AMI, Host drive #03, > SCSI2 0/direct
> > fixed sd3: 19998MB, 512 bytes/sector, 40955904 sectors
> > scsibus1 at ami0: 16 targets
> > ppb4 at pci3 dev 0 function 1 "NEC PCIE-PCIX" rev 0x06
> > pci5 at ppb4 bus 5
> > ppb5 at pci0 dev 28 function 3 "Intel 82801I PCIE" rev 0x02: msi
> > pci6 at ppb5 bus 3
> > mskc0 at pci6 dev 0 function 0 "Marvell Yukon 88E8052" rev 0x21,
> > Yukon-2 EC rev. A3 (0x2): apic 2 int 19 msk0 at mskc0 port A: address
> > 00:1d:60:44:0c:fd eephy0 at msk0 phy 0: 88E1111 Gigabit PHY, rev. 2
> > ppb6 at pci0 dev 28 function 5 "Intel 82801I PCIE" rev 0x02: msi
> > pci7 at ppb6 bus 2
> > pciide0 at pci7 dev 0 function 0 "Marvell 88SE6121 SATA" rev 0xb1: DMA
> > (unsupported), channel 0 configured to native-PCI, channel 1 configured
> > to native-PCI pciide0: using apic 2 int 17 for native-PCI interrupt
> > atapiscsi0 at pciide0 channel 0 drive 0 scsibus2 at atapiscsi0: 2
> > targets cd0 at scsibus2 targ 0 lun 0: <PIONEER, DVD-RW DVR-107D, 1.05>
> > ATAPI 5/cdrom removable pciide0: channel 1 ignored (not responding;
> > disabled or no drives?) uhci3 at pci0 dev 29 function 0 "Intel 82801I
> > USB" rev 0x02: apic 2 int 23 uhci4 at pci0 dev 29 function 1 "Intel
> > 82801I USB" rev 0x02: apic 2 int 19 uhci5 at pci0 dev 29 function 2
> > "Intel 82801I USB" rev 0x02: apic 2 int 18 ehci1 at pci0 dev 29
> > function 7 "Intel 82801I USB" rev 0x02: apic 2 int 23 usb1 at ehci1:
> > USB revision 2.0 uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr
> > 1 ppb7 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x92
> > pci8 at ppb7 bus 8
> > "VIA VT6306 FireWire" rev 0xc0 at pci8 dev 7 function 0 not configured
> > "Intel 82801IR LPC" rev 0x02 at pci0 dev 31 function 0 not configured
> > pciide1 at pci0 dev 31 function 2 "Intel 82801I SATA" rev 0x02: DMA,
> > channel 0 configured to native-PCI, channel 1 configured to native-PCI
> > pciide1: using apic 2 int 22 for native-PCI interrupt "Intel 82801I
> > SMBus" rev 0x02 at pci0 dev 31 function 3 not configured pciide2 at
> > pci0 dev 31 function 5 "Intel 82801I SATA" rev 0x02: DMA, channel 0
> > wired to native-PCI, channel 1 wired to native-PCI pciide2: using apic
> > 2 int 22 for native-PCI interrupt usb2 at uhci0: USB revision 1.0 uhub2
> > at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb3 at uhci1: USB
> > revision 1.0 uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > usb4 at uhci2: USB revision 1.0
> > uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > usb5 at uhci3: USB revision 1.0
> > uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > usb6 at uhci4: USB revision 1.0
> > uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > usb7 at uhci5: USB revision 1.0
> > uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > isa0 at mainbus0
> > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> > pckbc0 at isa0 port 0x60/5
> > pckbd0 at pckbc0 (kbd slot)
> > pckbc0: using irq 1 for kbd slot
> > wskbd0 at pckbd0: console keyboard, using wsdisplay0
> > uhub8 at uhub6 port 2 "vendor 0x046d G15 Keyboard Hub" rev 1.10/0.20
> > addr 2 uhidev0 at uhub8 port 1 configuration 1 interface 0 "vendor
> > 0x046d G15 Gaming Keyboard" rev 2.00/1.00 addr 3 uhidev0: iclass 3/1
> > ukbd0 at uhidev0
> > wskbd1 at ukbd0 mux 1
> > wskbd1: connecting to wsdisplay0
> > uhidev1 at uhub8 port 1 configuration 1 interface 1 "vendor 0x046d G15
> > Gaming Keyboard" rev 2.00/1.00 addr 3 uhidev1: iclass 3/0, 3 report ids
> > uhid at uhidev1 reportid 1 not configured
> > uhid at uhidev1 reportid 2 not configured
> > uhid at uhidev1 reportid 3 not configured
> > uhidev2 at uhub8 port 4 configuration 1 interface 0 "vendor 0x046d G15
> > GamePanel LCD" rev 2.00/0.20 addr 4 uhidev2: iclass 3/0, 3 report ids
> > uhid at uhidev2 reportid 1 not configured
> > uhid at uhidev2 reportid 2 not configured
> > uhid at uhidev2 reportid 3 not configured
> > uhidev3 at uhub7 port 1 configuration 1 interface 0 "Razer Razer
> > Copperhead Laser Mouse" rev 2.00/21.00 addr 2 uhidev3: iclass 3/0
> > uhid at uhidev3 not configured
> > uhidev4 at uhub7 port 1 configuration 1 interface 1 "Razer Razer
> > Copperhead Laser Mouse" rev 2.00/21.00 addr 2 uhidev4: iclass 3/1
> > ukbd1 at uhidev4
> > wskbd2 at ukbd1 mux 1
> > wskbd2: connecting to wsdisplay0
> > softraid0 at root
> > scsibus3 at softraid0: 256 targets
> > root on rd0a swap on rd0b dump on rd0b
> > panic: Non dma-reachable buffer at curaddr 0x12e5e3ba0(raw)
> > syncing disks... 173 172 134 68 4
> > OpenBSD 5.0 (GENERIC) #53: Wed Aug 17 10:07:52 MDT 2011
> > dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC
> > real mem = 4293132288 (4094MB)
> > avail mem = 4164763648 (3971MB)
> > mainbus0 at root
> > bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf06f0 (73 entries)
> > bios0: vendor American Megatrends Inc. version "1004" date 02/22/2008
> > bios0: ASUSTeK Computer INC. P5K WS
> > acpi0 at bios0: rev 2
> > acpi0: sleep states S0 S1 S3 S4 S5
> > acpi0: tables DSDT FACP APIC MCFG OEMB HPET
> > acpi0: wakeup devices P0P2(S4) P0P1(S4) PS2K(S4) UAR1(S4) EUSB(S4)
> > USBE(S4) P0P4(S4) P0P5(S4) P0P6(S4) P0P7(S4) P0P8(S4) P0P9(S4) GBEC(S4)
> > USB0(S4) USB1(S4) USB2(S4) USB3(S4) USB4(S4) USB5(S4) USB6(S4)
> > acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimadt0 at acpi0 addr
> > 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor)
> > cpu0: Intel(R) Core(TM)2 Duo CPU E8200 @ 2.66GHz, 2671.98 MHz cpu0:
> >
> > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,NXE,LONG
> > cpu0: 6MB 64b/line 16-way L2 cache cpu0: apic clock running at 333MHz
> > cpu at mainbus0: not configured
> > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
> > ioapic1 at mainbus0: apid 3 pa 0xfec10000, version ff, 256 pins
> > ioapic1: misconfigured as apic 15, can't remap to apid 3
> > acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
> > acpihpet0 at acpi0: 14318179 Hz
> > acpiprt0 at acpi0: bus 0 (PCI0)
> > acpiprt1 at acpi0: bus 1 (P0P2)
> > acpiprt2 at acpi0: bus 8 (P0P1)
> > acpiprt3 at acpi0: bus 7 (P0P4)
> > acpiprt4 at acpi0: bus -1 (P0P5)
> > acpiprt5 at acpi0: bus 4 (P0P6)
> > acpiprt6 at acpi0: bus 6 (PXHA)
> > acpiprt7 at acpi0: bus 3 (P0P7)
> > acpiprt8 at acpi0: bus -1 (P0P8)
> > acpiprt9 at acpi0: bus 2 (P0P9)
> > acpicpu0 at acpi0
> > aibs0 at acpi0: RTMP RVLT RFAN GGRP GITM SITM
> > acpibtn0 at acpi0: PWRB
> > cpu0: unknown Enhanced SpeedStep CPU, msr 0x061a082006000820
> > cpu0: using only highest and lowest power states
> > cpu0: Enhanced SpeedStep 2671 MHz: speeds: 2667, 2000 MHz
> > pci0 at mainbus0 bus 0
> > pchb0 at pci0 dev 0 function 0 "Intel 82G33 Host" rev 0x02
> > ppb0 at pci0 dev 1 function 0 "Intel 82G33 PCIE" rev 0x02: msi
> > pci1 at ppb0 bus 1
> > vga1 at pci1 dev 0 function 0 "NVIDIA GeForce 8800 GTS" rev 0xa2
> > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> > wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> > uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x02: apic 2 int
> > 16 uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x02: apic 2
> > int 21 uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x02:
> > apic 2 int 18 ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev
> > 0x02: apic 2 int 18 usb0 at ehci0: USB revision 2.0
> > uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> > azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x02: msi
> > azalia0: codecs: Realtek ALC888
> > audio0 at azalia0
> > ppb1 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x02: msi
> > pci2 at ppb1 bus 7
> > ppb2 at pci0 dev 28 function 2 "Intel 82801I PCIE" rev 0x02: msi
> > pci3 at ppb2 bus 4
> > ppb3 at pci3 dev 0 function 0 "NEC PCIE-PCIX" rev 0x06
> > pci4 at ppb3 bus 6
> > ami0 at pci4 dev 1 function 0 "Symbios Logic MegaRAID" rev 0x01: apic 2
> > int 19 ami0: Intel RAID SRCS16, 32b, FW 713S, BIOS vG401, 64MB RAM
> > ami0: 1 channels, 0 FC loops, 4 logical drives
> > scsibus0 at ami0: 40 targets
> > sd0 at scsibus0 targ 0 lun 0: <AMI, Host drive #00, > SCSI2 0/direct
> > fixed sd0: 39999MB, 512 bytes/sector, 81917952 sectors
> > sd1 at scsibus0 targ 1 lun 0: <AMI, Host drive #01, > SCSI2 0/direct
> > fixed sd1: 129999MB, 512 bytes/sector, 266237952 sectors
> > sd2 at scsibus0 targ 2 lun 0: <AMI, Host drive #02, > SCSI2 0/direct
> > fixed sd2: 19998MB, 512 bytes/sector, 40955904 sectors
> > sd3 at scsibus0 targ 3 lun 0: <AMI, Host drive #03, > SCSI2 0/direct
> > fixed sd3: 19998MB, 512 bytes/sector, 40955904 sectors
> > scsibus1 at ami0: 16 targets
> > ppb4 at pci3 dev 0 function 1 "NEC PCIE-PCIX" rev 0x06
> > pci5 at ppb4 bus 5
> > ppb5 at pci0 dev 28 function 3 "Intel 82801I PCIE" rev 0x02: msi
> > pci6 at ppb5 bus 3
> > mskc0 at pci6 dev 0 function 0 "Marvell Yukon 88E8052" rev 0x21,
> > Yukon-2 EC rev. A3 (0x2): apic 2 int 19 msk0 at mskc0 port A: address
> > 00:1d:60:44:0c:fd eephy0 at msk0 phy 0: 88E1111 Gigabit PHY, rev. 2
> > ppb6 at pci0 dev 28 function 5 "Intel 82801I PCIE" rev 0x02: msi
> > pci7 at ppb6 bus 2
> > pciide0 at pci7 dev 0 function 0 "Marvell 88SE6121 SATA" rev 0xb1: DMA
> > (unsupported), channel 0 configured to native-PCI, channel 1 configured
> > to native-PCI pciide0: using apic 2 int 17 for native-PCI interrupt
> > atapiscsi0 at pciide0 channel 0 drive 0 scsibus2 at atapiscsi0: 2
> > targets cd0 at scsibus2 targ 0 lun 0: <PIONEER, DVD-RW DVR-107D, 1.05>
> > ATAPI 5/cdrom removable pciide0: channel 1 ignored (not responding;
> > disabled or no drives?) uhci3 at pci0 dev 29 function 0 "Intel 82801I
> > USB" rev 0x02: apic 2 int 23 uhci4 at pci0 dev 29 function 1 "Intel
> > 82801I USB" rev 0x02: apic 2 int 19 uhci5 at pci0 dev 29 function 2
> > "Intel 82801I USB" rev 0x02: apic 2 int 18 ehci1 at pci0 dev 29
> > function 7 "Intel 82801I USB" rev 0x02: apic 2 int 23 usb1 at ehci1:
> > USB revision 2.0 uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr
> > 1 ppb7 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x92
> > pci8 at ppb7 bus 8
> > "VIA VT6306 FireWire" rev 0xc0 at pci8 dev 7 function 0 not configured
> > pcib0 at pci0 dev 31 function 0 "Intel 82801IR LPC" rev 0x02
> > pciide1 at pci0 dev 31 function 2 "Intel 82801I SATA" rev 0x02: DMA,
> > channel 0 configured to native-PCI, channel 1 configured to native-PCI
> > pciide1: using apic 2 int 22 for native-PCI interrupt ichiic0 at pci0
> > dev 31 function 3 "Intel 82801I SMBus" rev 0x02: apic 2 int 18 iic0 at
> > ichiic0 spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-6400CL5
> > spdmem1 at iic0 addr 0x51: 1GB DDR2 SDRAM non-parity PC2-6400CL5
> > spdmem2 at iic0 addr 0x52: 1GB DDR2 SDRAM non-parity PC2-6400CL5
> > spdmem3 at iic0 addr 0x53: 1GB DDR2 SDRAM non-parity PC2-6400CL5
> > pciide2 at pci0 dev 31 function 5 "Intel 82801I SATA" rev 0x02: DMA,
> > channel 0 wired to native-PCI, channel 1 wired to native-PCI pciide2:
> > using apic 2 int 22 for native-PCI interrupt usb2 at uhci0: USB
> > revision 1.0 uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > usb3 at uhci1: USB revision 1.0
> > uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > usb4 at uhci2: USB revision 1.0
> > uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > usb5 at uhci3: USB revision 1.0
> > uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > usb6 at uhci4: USB revision 1.0
> > uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > usb7 at uhci5: USB revision 1.0
> > uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > isa0 at pcib0
> > isadma0 at isa0
> > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> > pckbc0 at isa0 port 0x60/5
> > pckbd0 at pckbc0 (kbd slot)
> > pckbc0: using irq 1 for kbd slot
> > wskbd0 at pckbd0: console keyboard, using wsdisplay0
> > pcppi0 at isa0 port 0x61
> > spkr0 at pcppi0
> > wbsio0 at isa0 port 0x2e/2: W83627DHG rev 0x23
> > lm1 at wbsio0 port 0x290/8: W83627DHG
> > fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> > mtrr: Pentium Pro MTRR support
> > uhub8 at uhub6 port 2 "Logitech G15 Keyboard Hub" rev 1.10/0.20 addr 2
> > uhidev0 at uhub8 port 1 configuration 1 interface 0 "Logitech G15
> > Gaming Keyboard" rev 2.00/1.00 addr 3 uhidev0: iclass 3/1
> > ukbd0 at uhidev0: 8 modifier keys, 6 key codes
> > wskbd1 at ukbd0 mux 1
> > wskbd1: connecting to wsdisplay0
> > uhidev1 at uhub8 port 1 configuration 1 interface 1 "Logitech G15
> > Gaming Keyboard" rev 2.00/1.00 addr 3 uhidev1: iclass 3/0, 3 report ids
> > uhid0 at uhidev1 reportid 1: input=1, output=0, feature=0
> > uhid1 at uhidev1 reportid 2: input=7, output=0, feature=0
> > uhid2 at uhidev1 reportid 3: input=1, output=20, feature=1
> > uhidev2 at uhub8 port 4 configuration 1 interface 0 "Logitech G15
> > GamePanel LCD" rev 2.00/0.20 addr 4 uhidev2: iclass 3/0, 3 report ids
> > uhid3 at uhidev2 reportid 1: input=6, output=0, feature=0
> > uhid4 at uhidev2 reportid 2: input=4, output=6, feature=3
> > uhid5 at uhidev2 reportid 3: input=0, output=991, feature=0
> > uhidev3 at uhub7 port 1 configuration 1 interface 0 "Razer Razer
> > Copperhead Laser Mouse" rev 2.00/21.00 addr 2 uhidev3: iclass 3/0
> > ums0 at uhidev3: 7 buttons, Z dir
> > wsmouse0 at ums0 mux 0
> > uhidev4 at uhub7 port 1 configuration 1 interface 1 "Razer Razer
> > Copperhead Laser Mouse" rev 2.00/21.00 addr 2 uhidev4: iclass 3/1
> > ukbd1 at uhidev4: 8 modifier keys, 6 key codes
> > wskbd2 at ukbd1 mux 1
> > wskbd2: connecting to wsdisplay0
> > vscsi0 at root
> > scsibus3 at vscsi0: 256 targets
> > softraid0 at root
> > scsibus4 at softraid0: 256 targets
> > root on sd2a (c33e43edb729ece8.a) swap on sd2b dump on sd2b
> > WARNING: /mnt was not properly unmounted
> >
> >
> > ****************************************************************************
> >
> > dmesg, same Pc, i386 install with 4096 MB
> >
> >
> > ****************************************************************************
> >
> >
> > OpenBSD 5.0 (GENERIC.MP) #59: Wed Aug 17 10:19:44 MDT 2011
> > dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
> > cpu0: Intel(R) Core(TM)2 Duo CPU E8200 @ 2.66GHz ("GenuineIntel"
> > 686-class) 2.68 GHz cpu0:
> >
> > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1
> > real mem = 3488395264 (3326MB) avail mem = 3421270016 (3262MB)
> > mainbus0 at root
> > bios0 at mainbus0: AT/286+ BIOS, date 02/22/08, BIOS32 rev. 0 @
> > 0xf0010, SMBIOS rev. 2.4 @ 0xf06f0 (73 entries) bios0: vendor American
> > Megatrends Inc. version "1004" date 02/22/2008 bios0: ASUSTeK Computer
> > INC. P5K WS acpi0 at bios0: rev 2
> > acpi0: sleep states S0 S1 S3 S4 S5
> > acpi0: tables DSDT FACP APIC MCFG OEMB HPET
> > acpi0: wakeup devices P0P2(S4) P0P1(S4) PS2K(S4) UAR1(S4) EUSB(S4)
> > USBE(S4) P0P4(S4) P0P5(S4) P0P6(S4) P0P7(S4) P0P8(S4) P0P9(S4) GBEC(S4)
> > USB0(S4) USB1(S4) USB2(S4) USB3(S4) USB4(S4) USB5(S4) USB6(S4)
> > acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimadt0 at acpi0 addr
> > 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor)
> > cpu0: apic clock running at 333MHz cpu1 at mainbus0: apid 1
> > (application processor) cpu1: Intel(R) Core(TM)2 Duo CPU E8200 @
> > 2.66GHz ("GenuineIntel" 686-class) 2.68 GHz cpu1:
> >
> > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1
> > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins ioapic1
> > at mainbus0: apid 3 pa 0xfec10000, version ff, 256 pins ioapic1:
> > misconfigured as apic 15, can't remap to apid 3 acpimcfg0 at acpi0 addr
> > 0xe0000000, bus 0-255 acpihpet0 at acpi0: 14318179 Hz
> > acpiprt0 at acpi0: bus 0 (PCI0)
> > acpiprt1 at acpi0: bus 1 (P0P2)
> > acpiprt2 at acpi0: bus 8 (P0P1)
> > acpiprt3 at acpi0: bus 7 (P0P4)
> > acpiprt4 at acpi0: bus -1 (P0P5)
> > acpiprt5 at acpi0: bus 4 (P0P6)
> > acpiprt6 at acpi0: bus 6 (PXHA)
> > acpiprt7 at acpi0: bus 3 (P0P7)
> > acpiprt8 at acpi0: bus -1 (P0P8)
> > acpiprt9 at acpi0: bus 2 (P0P9)
> > acpicpu0 at acpi0
> > acpicpu1 at acpi0
> > aibs0 at acpi0: RTMP RVLT RFAN GGRP GITM SITM
> > acpibtn0 at acpi0: PWRB
> > bios0: ROM list: 0xc0000/0xd200 0xcd800/0x3400 0xd1000/0x2400
> > cpu0: unknown Enhanced SpeedStep CPU, msr 0x061a082006000820
> > cpu0: using only highest and lowest power states
> > cpu0: Enhanced SpeedStep 2672 MHz: speeds: 2667, 2000 MHz
> > pci0 at mainbus0 bus 0: configuration mode 1 (bios)
> > pchb0 at pci0 dev 0 function 0 "Intel 82G33 Host" rev 0x02
> > ppb0 at pci0 dev 1 function 0 "Intel 82G33 PCIE" rev 0x02: apic 2 int 16
> > pci1 at ppb0 bus 1
> > vga1 at pci1 dev 0 function 0 "NVIDIA GeForce 8800 GTS" rev 0xa2
> > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> > wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> > uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x02: apic 2 int
> > 16 uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x02: apic 2
> > int 21 uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x02:
> > apic 2 int 18 ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev
> > 0x02: apic 2 int 18 usb0 at ehci0: USB revision 2.0
> > uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> > azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x02: msi
> > azalia0: codecs: Realtek ALC888
> > audio0 at azalia0
> > ppb1 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x02: apic 2 int
> > 17 pci2 at ppb1 bus 7
> > ppb2 at pci0 dev 28 function 2 "Intel 82801I PCIE" rev 0x02: apic 2 int
> > 18 pci3 at ppb2 bus 4
> > ppb3 at pci3 dev 0 function 0 "NEC PCIE-PCIX" rev 0x06
> > pci4 at ppb3 bus 6
> > ami0 at pci4 dev 1 function 0 "Symbios Logic MegaRAID" rev 0x01: apic 2
> > int 19 ami0: Intel RAID SRCS16, 32b, FW 713S, BIOS vG401, 64MB RAM
> > ami0: 1 channels, 0 FC loops, 4 logical drives
> > scsibus0 at ami0: 40 targets
> > sd0 at scsibus0 targ 0 lun 0: <AMI, Host drive #00, > SCSI2 0/direct
> > fixed sd0: 39999MB, 512 bytes/sector, 81917952 sectors
> > sd1 at scsibus0 targ 1 lun 0: <AMI, Host drive #01, > SCSI2 0/direct
> > fixed sd1: 129999MB, 512 bytes/sector, 266237952 sectors
> > sd2 at scsibus0 targ 2 lun 0: <AMI, Host drive #02, > SCSI2 0/direct
> > fixed sd2: 19998MB, 512 bytes/sector, 40955904 sectors
> > sd3 at scsibus0 targ 3 lun 0: <AMI, Host drive #03, > SCSI2 0/direct
> > fixed sd3: 19998MB, 512 bytes/sector, 40955904 sectors
> > scsibus1 at ami0: 16 targets
> > ppb4 at pci3 dev 0 function 1 "NEC PCIE-PCIX" rev 0x06
> > pci5 at ppb4 bus 5
> > ppb5 at pci0 dev 28 function 3 "Intel 82801I PCIE" rev 0x02: apic 2 int
> > 19 pci6 at ppb5 bus 3
> > mskc0 at pci6 dev 0 function 0 "Marvell Yukon 88E8052" rev 0x21,
> > Yukon-2 EC rev. A3 (0x2): apic 2 int 19 msk0 at mskc0 port A: address
> > 00:1d:60:44:0c:fd eephy0 at msk0 phy 0: 88E1111 Gigabit PHY, rev. 2
> > ppb6 at pci0 dev 28 function 5 "Intel 82801I PCIE" rev 0x02: apic 2 int
> > 16 pci7 at ppb6 bus 2
> > pciide0 at pci7 dev 0 function 0 "Marvell 88SE6121 SATA" rev 0xb1: DMA
> > (unsupported), channel 0 configured to native-PCI, channel 1 configured
> > to native-PCI pciide0: using apic 2 int 17 for native-PCI interrupt
> > atapiscsi0 at pciide0 channel 0 drive 0 scsibus2 at atapiscsi0: 2
> > targets cd0 at scsibus2 targ 0 lun 0: <PIONEER, DVD-RW DVR-107D, 1.05>
> > ATAPI 5/cdrom removable pciide0: channel 1 ignored (not responding;
> > disabled or no drives?) uhci3 at pci0 dev 29 function 0 "Intel 82801I
> > USB" rev 0x02: apic 2 int 23 uhci4 at pci0 dev 29 function 1 "Intel
> > 82801I USB" rev 0x02: apic 2 int 19 uhci5 at pci0 dev 29 function 2
> > "Intel 82801I USB" rev 0x02: apic 2 int 18 ehci1 at pci0 dev 29
> > function 7 "Intel 82801I USB" rev 0x02: apic 2 int 23 usb1 at ehci1:
> > USB revision 2.0 uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr
> > 1 ppb7 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x92
> > pci8 at ppb7 bus 8
> > "VIA VT6306 FireWire" rev 0xc0 at pci8 dev 7 function 0 not configured
> > ichpcib0 at pci0 dev 31 function 0 "Intel 82801IR LPC" rev 0x02: PM
> > disabled pciide1 at pci0 dev 31 function 2 "Intel 82801I SATA" rev
> > 0x02: DMA, channel 0 configured to native-PCI, channel 1 configured to
> > native-PCI pciide1: using apic 2 int 22 for native-PCI interrupt
> > ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x02: apic 2
> > int 18 iic0 at ichiic0 spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM
> > non-parity PC2-6400CL5 spdmem1 at iic0 addr 0x51: 1GB DDR2 SDRAM
> > non-parity PC2-6400CL5 spdmem2 at iic0 addr 0x52: 1GB DDR2 SDRAM
> > non-parity PC2-6400CL5 spdmem3 at iic0 addr 0x53: 1GB DDR2 SDRAM
> > non-parity PC2-6400CL5 pciide2 at pci0 dev 31 function 5 "Intel 82801I
> > SATA" rev 0x02: DMA, channel 0 wired to native-PCI, channel 1 wired to
> > native-PCI pciide2: using apic 2 int 22 for native-PCI interrupt usb2
> > at uhci0: USB revision 1.0 uhub2 at usb2 "Intel UHCI root hub" rev
> > 1.00/1.00 addr 1 usb3 at uhci1: USB revision 1.0
> > uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > usb4 at uhci2: USB revision 1.0
> > uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > usb5 at uhci3: USB revision 1.0
> > uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > usb6 at uhci4: USB revision 1.0
> > uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > usb7 at uhci5: USB revision 1.0
> > uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > isa0 at ichpcib0
> > isadma0 at isa0
> > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> > pckbc0 at isa0 port 0x60/5
> > pckbd0 at pckbc0 (kbd slot)
> > pckbc0: using irq 1 for kbd slot
> > wskbd0 at pckbd0: console keyboard, using wsdisplay0
> > pcppi0 at isa0 port 0x61
> > spkr0 at pcppi0
> > wbsio0 at isa0 port 0x2e/2: W83627DHG rev 0x23
> > lm1 at wbsio0 port 0x290/8: W83627DHG
> > npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> > fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> > mtrr: Pentium Pro MTRR support
> > uhub8 at uhub6 port 2 "Logitech G15 Keyboard Hub" rev 1.10/0.20 addr 2
> > uhidev0 at uhub8 port 1 configuration 1 interface 0 "Logitech G15
> > Gaming Keyboard" rev 2.00/1.00 addr 3 uhidev0: iclass 3/1
> > ukbd0 at uhidev0: 8 modifier keys, 6 key codes
> > wskbd1 at ukbd0 mux 1
> > wskbd1: connecting to wsdisplay0
> > uhidev1 at uhub8 port 1 configuration 1 interface 1 "Logitech G15
> > Gaming Keyboard" rev 2.00/1.00 addr 3 uhidev1: iclass 3/0, 3 report ids
> > uhid0 at uhidev1 reportid 1: input=1, output=0, feature=0
> > uhid1 at uhidev1 reportid 2: input=7, output=0, feature=0
> > uhid2 at uhidev1 reportid 3: input=1, output=20, feature=1
> > uhidev2 at uhub8 port 4 configuration 1 interface 0 "Logitech G15
> > GamePanel LCD" rev 2.00/0.20 addr 4 uhidev2: iclass 3/0, 3 report ids
> > uhid3 at uhidev2 reportid 1: input=6, output=0, feature=0
> > uhid4 at uhidev2 reportid 2: input=4, output=6, feature=3
> > uhid5 at uhidev2 reportid 3: input=0, output=991, feature=0
> > uhidev3 at uhub7 port 1 configuration 1 interface 0 "Razer Razer
> > Copperhead Laser Mouse" rev 2.00/21.00 addr 2 uhidev3: iclass 3/0
> > ums0 at uhidev3: 7 buttons, Z dir
> > wsmouse0 at ums0 mux 0
> > uhidev4 at uhub7 port 1 configuration 1 interface 1 "Razer Razer
> > Copperhead Laser Mouse" rev 2.00/21.00 addr 2 uhidev4: iclass 3/1
> > ukbd1 at uhidev4: 8 modifier keys, 6 key codes
> > wskbd2 at ukbd1 mux 1
> > wskbd2: connecting to wsdisplay0
> > vscsi0 at root
> > scsibus3 at vscsi0: 256 targets
> > softraid0 at root
> > scsibus4 at softraid0: 256 targets
> > root on sd2a (92e2252ceb7c8b90.a) swap on sd2b dump on sd2b
> >
> > ************************************************************************
> >
> > dmesg, same Pc amd64 install with 3072 MB
> >
> > ************************************************************************
> >
> > OpenBSD 5.0 (RAMDISK_CD) #53: Wed Aug 17 10:17:43 MDT 2011
> > dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
> > real mem = 3219390464 (3070MB)
> > avail mem = 3121913856 (2977MB)
> > mainbus0 at root
> > bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf06f0 (73 entries)
> > bios0: vendor American Megatrends Inc. version "1004" date 02/22/2008
> > bios0: ASUSTeK Computer INC. P5K WS
> > acpi0 at bios0: rev 2
> > acpi0: sleep states S0 S1 S3 S4 S5
> > acpi0: tables DSDT FACP APIC MCFG OEMB HPET
> > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> > cpu0 at mainbus0: apid 0 (boot processor)
> > cpu0: Intel(R) Core(TM)2 Duo CPU E8200 @ 2.66GHz, 2671.98 MHz
> > cpu0:
> >
> > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,NXE,LONG
> > cpu0: 6MB 64b/line 16-way L2 cache cpu0: apic clock running at 333MHz
> > cpu at mainbus0: not configured
> > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
> > ioapic1 at mainbus0: apid 3 pa 0xfec10000, version ff, 256 pins
> > ioapic1: misconfigured as apic 15, can't remap to apid 3
> > acpiprt0 at acpi0: bus 0 (PCI0)
> > acpiprt1 at acpi0: bus 1 (P0P2)
> > acpiprt2 at acpi0: bus 8 (P0P1)
> > acpiprt3 at acpi0: bus 7 (P0P4)
> > acpiprt4 at acpi0: bus -1 (P0P5)
> > acpiprt5 at acpi0: bus 4 (P0P6)
> > acpiprt6 at acpi0: bus 6 (PXHA)
> > acpiprt7 at acpi0: bus 3 (P0P7)
> > acpiprt8 at acpi0: bus -1 (P0P8)
> > acpiprt9 at acpi0: bus 2 (P0P9)
> > pci0 at mainbus0 bus 0
> > pchb0 at pci0 dev 0 function 0 "Intel 82G33 Host" rev 0x02
> > ppb0 at pci0 dev 1 function 0 "Intel 82G33 PCIE" rev 0x02: msi
> > pci1 at ppb0 bus 1
> > vga1 at pci1 dev 0 function 0 "NVIDIA GeForce 8800 GTS" rev 0xa2
> > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> > uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x02: apic 2 int
> > 16 uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x02: apic 2
> > int 21 uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x02:
> > apic 2 int 18 ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev
> > 0x02: apic 2 int 18 usb0 at ehci0: USB revision 2.0
> > uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> > "Intel 82801I HD Audio" rev 0x02 at pci0 dev 27 function 0 not
> > configured ppb1 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x02:
> > msi pci2 at ppb1 bus 7
> > ppb2 at pci0 dev 28 function 2 "Intel 82801I PCIE" rev 0x02: msi
> > pci3 at ppb2 bus 4
> > ppb3 at pci3 dev 0 function 0 "NEC PCIE-PCIX" rev 0x06
> > pci4 at ppb3 bus 6
> > ami0 at pci4 dev 1 function 0 "Symbios Logic MegaRAID" rev 0x01: apic 2
> > int 19 ami0: Intel RAID SRCS16, 32b, FW 713S, BIOS vG401, 64MB RAM
> > ami0: 1 channels, 0 FC loops, 4 logical drives
> > scsibus0 at ami0: 40 targets
> > sd0 at scsibus0 targ 0 lun 0: <AMI, Host drive #00, > SCSI2 0/direct
> > fixed sd0: 39999MB, 512 bytes/sector, 81917952 sectors
> > sd1 at scsibus0 targ 1 lun 0: <AMI, Host drive #01, > SCSI2 0/direct
> > fixed sd1: 129999MB, 512 bytes/sector, 266237952 sectors
> > sd2 at scsibus0 targ 2 lun 0: <AMI, Host drive #02, > SCSI2 0/direct
> > fixed sd2: 19998MB, 512 bytes/sector, 40955904 sectors
> > sd3 at scsibus0 targ 3 lun 0: <AMI, Host drive #03, > SCSI2 0/direct
> > fixed sd3: 19998MB, 512 bytes/sector, 40955904 sectors
> > scsibus1 at ami0: 16 targets
> > ppb4 at pci3 dev 0 function 1 "NEC PCIE-PCIX" rev 0x06
> > pci5 at ppb4 bus 5
> > ppb5 at pci0 dev 28 function 3 "Intel 82801I PCIE" rev 0x02: msi
> > pci6 at ppb5 bus 3
> > mskc0 at pci6 dev 0 function 0 "Marvell Yukon 88E8052" rev 0x21,
> > Yukon-2 EC rev. A3 (0x2): apic 2 int 19 msk0 at mskc0 port A: address
> > 00:1d:60:44:0c:fd eephy0 at msk0 phy 0: 88E1111 Gigabit PHY, rev. 2
> > ppb6 at pci0 dev 28 function 5 "Intel 82801I PCIE" rev 0x02: msi
> > pci7 at ppb6 bus 2
> > pciide0 at pci7 dev 0 function 0 "Marvell 88SE6121 SATA" rev 0xb1: DMA
> > (unsupported), channel 0 configured to native-PCI, channel 1 configured
> > to native-PCI pciide0: using apic 2 int 17 for native-PCI interrupt
> > atapiscsi0 at pciide0 channel 0 drive 0 scsibus2 at atapiscsi0: 2
> > targets cd0 at scsibus2 targ 0 lun 0: <PIONEER, DVD-RW DVR-107D, 1.05>
> > ATAPI 5/cdrom removable pciide0: channel 1 ignored (not responding;
> > disabled or no drives?) uhci3 at pci0 dev 29 function 0 "Intel 82801I
> > USB" rev 0x02: apic 2 int 23 uhci4 at pci0 dev 29 function 1 "Intel
> > 82801I USB" rev 0x02: apic 2 int 19 uhci5 at pci0 dev 29 function 2
> > "Intel 82801I USB" rev 0x02: apic 2 int 18 ehci1 at pci0 dev 29
> > function 7 "Intel 82801I USB" rev 0x02: apic 2 int 23 usb1 at ehci1:
> > USB revision 2.0 uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr
> > 1 ppb7 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x92
> > pci8 at ppb7 bus 8
> > "VIA VT6306 FireWire" rev 0xc0 at pci8 dev 7 function 0 not configured
> > "Intel 82801IR LPC" rev 0x02 at pci0 dev 31 function 0 not configured
> > pciide1 at pci0 dev 31 function 2 "Intel 82801I SATA" rev 0x02: DMA,
> > channel 0 configured to native-PCI, channel 1 configured to native-PCI
> > pciide1: using apic 2 int 22 for native-PCI interrupt "Intel 82801I
> > SMBus" rev 0x02 at pci0 dev 31 function 3 not configured pciide2 at
> > pci0 dev 31 function 5 "Intel 82801I SATA" rev 0x02: DMA, channel 0
> > wired to native-PCI, channel 1 wired to native-PCI pciide2: using apic
> > 2 int 22 for native-PCI interrupt usb2 at uhci0: USB revision 1.0 uhub2
> > at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb3 at uhci1: USB
> > revision 1.0 uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > usb4 at uhci2: USB revision 1.0
> > uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > usb5 at uhci3: USB revision 1.0
> > uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > usb6 at uhci4: USB revision 1.0
> > uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > usb7 at uhci5: USB revision 1.0
> > uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > isa0 at mainbus0
> > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> > pckbc0 at isa0 port 0x60/5
> > pckbd0 at pckbc0 (kbd slot)
> > pckbc0: using irq 1 for kbd slot
> > wskbd0 at pckbd0: console keyboard, using wsdisplay0
> > uhub8 at uhub6 port 2 "vendor 0x046d G15 Keyboard Hub" rev 1.10/0.20
> > addr 2 uhidev0 at uhub8 port 1 configuration 1 interface 0 "vendor
> > 0x046d G15 Gaming Keyboard" rev 2.00/1.00 addr 3 uhidev0: iclass 3/1
> > ukbd0 at uhidev0
> > wskbd1 at ukbd0 mux 1
> > wskbd1: connecting to wsdisplay0
> > uhidev1 at uhub8 port 1 configuration 1 interface 1 "vendor 0x046d G15
> > Gaming Keyboard" rev 2.00/1.00 addr 3 uhidev1: iclass 3/0, 3 report ids
> > uhid at uhidev1 reportid 1 not configured
> > uhid at uhidev1 reportid 2 not configured
> > uhid at uhidev1 reportid 3 not configured
> > uhidev2 at uhub8 port 4 configuration 1 interface 0 "vendor 0x046d G15
> > GamePanel LCD" rev 2.00/0.20 addr 4 uhidev2: iclass 3/0, 3 report ids
> > uhid at uhidev2 reportid 1 not configured
> > uhid at uhidev2 reportid 2 not configured
> > uhid at uhidev2 reportid 3 not configured
> > uhidev3 at uhub7 port 1 configuration 1 interface 0 "Razer Razer
> > Copperhead Laser Mouse" rev 2.00/21.00 addr 2 uhidev3: iclass 3/0
> > uhid at uhidev3 not configured
> > uhidev4 at uhub7 port 1 configuration 1 interface 1 "Razer Razer
> > Copperhead Laser Mouse" rev 2.00/21.00 addr 2 uhidev4: iclass 3/1
> > ukbd1 at uhidev4
> > wskbd2 at ukbd1 mux 1
> > wskbd2: connecting to wsdisplay0
> > softraid0 at root
> > scsibus3 at softraid0: 256 targets
> > root on rd0a swap on rd0b dump on rd0b
> > syncing disks...
> > OpenBSD 5.0 (GENERIC.MP) #63: Wed Aug 17 10:14:30 MDT 2011
> > dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
> > real mem = 3219390464 (3070MB)
> > avail mem = 3119632384 (2975MB)
> > mainbus0 at root
> > bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf06f0 (73 entries)
> > bios0: vendor American Megatrends Inc. version "1004" date 02/22/2008
> > bios0: ASUSTeK Computer INC. P5K WS
> > acpi0 at bios0: rev 2
> > acpi0: sleep states S0 S1 S3 S4 S5
> > acpi0: tables DSDT FACP APIC MCFG OEMB HPET
> > acpi0: wakeup devices P0P2(S4) P0P1(S4) PS2K(S4) UAR1(S4) EUSB(S4)
> > USBE(S4) P0P4(S4) P0P5(S4) P0P6(S4) P0P7(S4) P0P8(S4) P0P9(S4) GBEC(S4)
> > USB0(S4) USB1(S4) USB2(S4) USB3(S4) USB4(S4) USB5(S4) USB6(S4)
> > acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimadt0 at acpi0 addr
> > 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor)
> > cpu0: Intel(R) Core(TM)2 Duo CPU E8200 @ 2.66GHz, 2671.95 MHz cpu0:
> >
> > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,NXE,LONG
> > cpu0: 6MB 64b/line 16-way L2 cache cpu0: apic clock running at 333MHz
> > cpu1 at mainbus0: apid 1 (application processor)
> > cpu1: Intel(R) Core(TM)2 Duo CPU E8200 @ 2.66GHz, 2671.60 MHz
> > cpu1:
> >
> > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,NXE,LONG
> > cpu1: 6MB 64b/line 16-way L2 cache ioapic0 at mainbus0: apid 2 pa
> > 0xfec00000, version 20, 24 pins ioapic1 at mainbus0: apid 3 pa
> > 0xfec10000, version ff, 256 pins ioapic1: misconfigured as apic 15,
> > can't remap to apid 3 acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
> > acpihpet0 at acpi0: 14318179 Hz
> > acpiprt0 at acpi0: bus 0 (PCI0)
> > acpiprt1 at acpi0: bus 1 (P0P2)
> > acpiprt2 at acpi0: bus 8 (P0P1)
> > acpiprt3 at acpi0: bus 7 (P0P4)
> > acpiprt4 at acpi0: bus -1 (P0P5)
> > acpiprt5 at acpi0: bus 4 (P0P6)
> > acpiprt6 at acpi0: bus 6 (PXHA)
> > acpiprt7 at acpi0: bus 3 (P0P7)
> > acpiprt8 at acpi0: bus -1 (P0P8)
> > acpiprt9 at acpi0: bus 2 (P0P9)
> > acpicpu0 at acpi0
> > acpicpu1 at acpi0
> > aibs0 at acpi0: RTMP RVLT RFAN GGRP GITM SITM
> > acpibtn0 at acpi0: PWRB
> > cpu0: unknown Enhanced SpeedStep CPU, msr 0x061a082006000820
> > cpu0: using only highest and lowest power states
> > cpu0: Enhanced SpeedStep 2671 MHz: speeds: 2667, 2000 MHz
> > pci0 at mainbus0 bus 0
> > pchb0 at pci0 dev 0 function 0 "Intel 82G33 Host" rev 0x02
> > ppb0 at pci0 dev 1 function 0 "Intel 82G33 PCIE" rev 0x02: msi
> > pci1 at ppb0 bus 1
> > vga1 at pci1 dev 0 function 0 "NVIDIA GeForce 8800 GTS" rev 0xa2
> > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> > wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> > uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x02: apic 2 int
> > 16 uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x02: apic 2
> > int 21 uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x02:
> > apic 2 int 18 ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev
> > 0x02: apic 2 int 18 usb0 at ehci0: USB revision 2.0
> > uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> > azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x02: msi
> > azalia0: codecs: Realtek ALC888
> > audio0 at azalia0
> > ppb1 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x02: msi
> > pci2 at ppb1 bus 7
> > ppb2 at pci0 dev 28 function 2 "Intel 82801I PCIE" rev 0x02: msi
> > pci3 at ppb2 bus 4
> > ppb3 at pci3 dev 0 function 0 "NEC PCIE-PCIX" rev 0x06
> > pci4 at ppb3 bus 6
> > ami0 at pci4 dev 1 function 0 "Symbios Logic MegaRAID" rev 0x01: apic 2
> > int 19 ami0: Intel RAID SRCS16, 32b, FW 713S, BIOS vG401, 64MB RAM
> > ami0: 1 channels, 0 FC loops, 4 logical drives
> > scsibus0 at ami0: 40 targets
> > sd0 at scsibus0 targ 0 lun 0: <AMI, Host drive #00, > SCSI2 0/direct
> > fixed sd0: 39999MB, 512 bytes/sector, 81917952 sectors
> > sd1 at scsibus0 targ 1 lun 0: <AMI, Host drive #01, > SCSI2 0/direct
> > fixed sd1: 129999MB, 512 bytes/sector, 266237952 sectors
> > sd2 at scsibus0 targ 2 lun 0: <AMI, Host drive #02, > SCSI2 0/direct
> > fixed sd2: 19998MB, 512 bytes/sector, 40955904 sectors
> > sd3 at scsibus0 targ 3 lun 0: <AMI, Host drive #03, > SCSI2 0/direct
> > fixed sd3: 19998MB, 512 bytes/sector, 40955904 sectors
> > scsibus1 at ami0: 16 targets
> > ppb4 at pci3 dev 0 function 1 "NEC PCIE-PCIX" rev 0x06
> > pci5 at ppb4 bus 5
> > ppb5 at pci0 dev 28 function 3 "Intel 82801I PCIE" rev 0x02: msi
> > pci6 at ppb5 bus 3
> > mskc0 at pci6 dev 0 function 0 "Marvell Yukon 88E8052" rev 0x21,
> > Yukon-2 EC rev. A3 (0x2): apic 2 int 19 msk0 at mskc0 port A: address
> > 00:1d:60:44:0c:fd eephy0 at msk0 phy 0: 88E1111 Gigabit PHY, rev. 2
> > ppb6 at pci0 dev 28 function 5 "Intel 82801I PCIE" rev 0x02: msi
> > pci7 at ppb6 bus 2
> > pciide0 at pci7 dev 0 function 0 "Marvell 88SE6121 SATA" rev 0xb1: DMA
> > (unsupported), channel 0 configured to native-PCI, channel 1 configured
> > to native-PCI pciide0: using apic 2 int 17 for native-PCI interrupt
> > atapiscsi0 at pciide0 channel 0 drive 0 scsibus2 at atapiscsi0: 2
> > targets cd0 at scsibus2 targ 0 lun 0: <PIONEER, DVD-RW DVR-107D, 1.05>
> > ATAPI 5/cdrom removable pciide0: channel 1 ignored (not responding;
> > disabled or no drives?) uhci3 at pci0 dev 29 function 0 "Intel 82801I
> > USB" rev 0x02: apic 2 int 23 uhci4 at pci0 dev 29 function 1 "Intel
> > 82801I USB" rev 0x02: apic 2 int 19 uhci5 at pci0 dev 29 function 2
> > "Intel 82801I USB" rev 0x02: apic 2 int 18 ehci1 at pci0 dev 29
> > function 7 "Intel 82801I USB" rev 0x02: apic 2 int 23 usb1 at ehci1:
> > USB revision 2.0 uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr
> > 1 ppb7 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x92
> > pci8 at ppb7 bus 8
> > "VIA VT6306 FireWire" rev 0xc0 at pci8 dev 7 function 0 not configured
> > pcib0 at pci0 dev 31 function 0 "Intel 82801IR LPC" rev 0x02
> > pciide1 at pci0 dev 31 function 2 "Intel 82801I SATA" rev 0x02: DMA,
> > channel 0 configured to native-PCI, channel 1 configured to native-PCI
> > pciide1: using apic 2 int 22 for native-PCI interrupt ichiic0 at pci0
> > dev 31 function 3 "Intel 82801I SMBus" rev 0x02: apic 2 int 18 iic0 at
> > ichiic0 spdmem0 at iic0 addr 0x51: 1GB DDR2 SDRAM non-parity PC2-6400CL5
> > spdmem1 at iic0 addr 0x52: 1GB DDR2 SDRAM non-parity PC2-6400CL5
> > spdmem2 at iic0 addr 0x53: 1GB DDR2 SDRAM non-parity PC2-6400CL5
> > pciide2 at pci0 dev 31 function 5 "Intel 82801I SATA" rev 0x02: DMA,
> > channel 0 wired to native-PCI, channel 1 wired to native-PCI pciide2:
> > using apic 2 int 22 for native-PCI interrupt usb2 at uhci0: USB
> > revision 1.0 uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > usb3 at uhci1: USB revision 1.0
> > uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > usb4 at uhci2: USB revision 1.0
> > uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > usb5 at uhci3: USB revision 1.0
> > uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > usb6 at uhci4: USB revision 1.0
> > uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > usb7 at uhci5: USB revision 1.0
> > uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > isa0 at pcib0
> > isadma0 at isa0
> > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> > pckbc0 at isa0 port 0x60/5
> > pckbd0 at pckbc0 (kbd slot)
> > pckbc0: using irq 1 for kbd slot
> > wskbd0 at pckbd0: console keyboard, using wsdisplay0
> > pcppi0 at isa0 port 0x61
> > spkr0 at pcppi0
> > wbsio0 at isa0 port 0x2e/2: W83627DHG rev 0x23
> > lm1 at wbsio0 port 0x290/8: W83627DHG
> > fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> > mtrr: Pentium Pro MTRR support
> > uhub8 at uhub6 port 2 "Logitech G15 Keyboard Hub" rev 1.10/0.20 addr 2
> > uhidev0 at uhub8 port 1 configuration 1 interface 0 "Logitech G15
> > Gaming Keyboard" rev 2.00/1.00 addr 3 uhidev0: iclass 3/1
> > ukbd0 at uhidev0: 8 modifier keys, 6 key codes
> > wskbd1 at ukbd0 mux 1
> > wskbd1: connecting to wsdisplay0
> > uhidev1 at uhub8 port 1 configuration 1 interface 1 "Logitech G15
> > Gaming Keyboard" rev 2.00/1.00 addr 3 uhidev1: iclass 3/0, 3 report ids
> > uhid0 at uhidev1 reportid 1: input=1, output=0, feature=0
> > uhid1 at uhidev1 reportid 2: input=7, output=0, feature=0
> > uhid2 at uhidev1 reportid 3: input=1, output=20, feature=1
> > uhidev2 at uhub8 port 4 configuration 1 interface 0 "Logitech G15
> > GamePanel LCD" rev 2.00/0.20 addr 4 uhidev2: iclass 3/0, 3 report ids
> > uhid3 at uhidev2 reportid 1: input=6, output=0, feature=0
> > uhid4 at uhidev2 reportid 2: input=4, output=6, feature=3
> > uhid5 at uhidev2 reportid 3: input=0, output=991, feature=0
> > uhidev3 at uhub7 port 1 configuration 1 interface 0 "Razer Razer
> > Copperhead Laser Mouse" rev 2.00/21.00 addr 2 uhidev3: iclass 3/0
> > ums0 at uhidev3: 7 buttons, Z dir
> > wsmouse0 at ums0 mux 0
> > uhidev4 at uhub7 port 1 configuration 1 interface 1 "Razer Razer
> > Copperhead Laser Mouse" rev 2.00/21.00 addr 2uhidev4: iclass 3/1
> > ukbd1 at uhidev4: 8 modifier keys, 6 key codes
> > wskbd2 at ukbd1 mux 1
> > wskbd2: connecting to wsdisplay0
> > vscsi0 at root
> > scsibus3 at vscsi0: 256 targets
> > softraid0 at root
> > scsibus4 at softraid0: 256 targets
> > root on sd2a (9c0293fac0ad6951.a) swap on sd2b dump on sd2b
