I've had tons of splasserts on my unreliable DSL connection recently.
Bit hard to test since it seems to depend on my useless provider acting
up. But maybe someone can see from the trace what's going on. This box
is no longer acting as a firewall, which is why the dmesg below lacks a
couple of network cards. No change in kernel though.
pppoe0: received unexpected PADO
pppoe0: received unexpected PADO
pppoe0: received unexpected PADO
pppoe0: received unexpected PADO
pppoe0: LCP keepalive timeout
splassert: assertwaitok: want -1 have 1
Starting stack trace...
assertwaitok() at assertwaitok+0x1c
pool_get() at pool_get+0xd5
ifa_item_insert() at ifa_item_insert+0x35
ifa_add() at ifa_add+0x43
in_ifinit() at in_ifinit+0x181
sppp_clear_ip_addrs() at sppp_clear_ip_addrs+0xb5
sppp_ipcp_tlf() at sppp_ipcp_tlf+0x1a
sppp_lcp_tld() at sppp_lcp_tld+0x8c
sppp_keepalive() at sppp_keepalive+0x193
softclock() at softclock+0x291
softintr_dispatch() at softintr_dispatch+0x5d
Xsoftclock() at Xsoftclock+0x2d
--- interrupt ---
end trace frame: 0x0, count: 245
0x8:
End of stack trace.
pppoe0: received unexpected PADO
pppoe0: received unexpected PADO
pppoe0: received unexpected PADO
pppoe0: received unexpected PADO
pppoe0: received unexpected PADO
pppoe0: LCP keepalive timeout
splassert: assertwaitok: want -1 have 1
Starting stack trace...
assertwaitok() at assertwaitok+0x1c
pool_get() at pool_get+0xd5
ifa_item_insert() at ifa_item_insert+0x35
ifa_add() at ifa_add+0x43
in_ifinit() at in_ifinit+0x181
sppp_clear_ip_addrs() at sppp_clear_ip_addrs+0xb5
sppp_ipcp_tlf() at sppp_ipcp_tlf+0x1a
sppp_lcp_tld() at sppp_lcp_tld+0x8c
sppp_keepalive() at sppp_keepalive+0x193
softclock() at softclock+0x291
softintr_dispatch() at softintr_dispatch+0x5d
Xsoftclock() at Xsoftclock+0x2d
--- interrupt ---
end trace frame: 0x0, count: 245
0x8:
End of stack trace.
pppoe0: received unexpected PADO
pppoe0: received unexpected PADO
pppoe0: received unexpected PADO
pppoe0: received unexpected PADO
pppoe0: received unexpected PADO
pppoe0: LCP keepalive timeout
splassert: assertwaitok: want -1 have 1
Starting stack trace...
assertwaitok() at assertwaitok+0x1c
pool_get() at pool_get+0xd5
ifa_item_insert() at ifa_item_insert+0x35
ifa_add() at ifa_add+0x43
in_ifinit() at in_ifinit+0x181
sppp_clear_ip_addrs() at sppp_clear_ip_addrs+0xb5
sppp_ipcp_tlf() at sppp_ipcp_tlf+0x1a
sppp_lcp_tld() at sppp_lcp_tld+0x8c
sppp_keepalive() at sppp_keepalive+0x193
softclock() at softclock+0x291
softintr_dispatch() at softintr_dispatch+0x5d
Xsoftclock() at Xsoftclock+0x2d
--- interrupt ---
end trace frame: 0x0, count: 245
0x8:
End of stack trace.
etc...
OpenBSD 5.0-current (GENERIC.MP) #1: Sun Jan 8 03:22:08 CET 2012
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 4292739072 (4093MB)
avail mem = 4164317184 (3971MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf0000 (64 entries)
bios0: vendor Phoenix Technologies, LTD version "ASUS M2N SLI ACPI BIOS
Revision 0201" date 09/07/2007
bios0: ASUSTeK Computer INC. M2N-SLI
acpi0 at bios0: rev 2
acpi0: sleep states S0 S1 S3 S4 S5
acpi0: tables DSDT FACP SSDT HPET MCFG APIC
acpi0: wakeup devices HUB0(S5) XVR0(S5) XVR1(S5) XVR2(S5) XVR3(S5) UAR1(S5)
UAR2(S5) PS2M(S4) PS2K(S4) USB0(S4) USB2(S4) MMAC(S5) MMCI(S5)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 25000000 Hz
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD Athlon(tm) 64 X2 Dual Core Processor 4800+, 2513.16 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,CX16,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,3DNOWP
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line
16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: apic clock running at 201MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: AMD Athlon(tm) 64 X2 Dual Core Processor 4800+, 2512.88 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,CX16,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,3DNOWP
cpu1: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line
16-way L2 cache
cpu1: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu1: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 11, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 2
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (HUB0)
acpicpu0 at acpi0: PSS
acpicpu1 at acpi0: PSS
acpitz0 at acpi0: critical temperature is 75 degC
acpibtn0 at acpi0: PWRB
aibs0 at acpi0: RTMP RVLT RFAN
aibs0: FSIF: misformed package: 3/5, assume 5
cpu0: PowerNow! K8 2512 MHz: speeds: 2500 2400 2200 2000 1800 1000 MHz
pci0 at mainbus0 bus 0
"NVIDIA nForce4 DDR" rev 0xa3 at pci0 dev 0 function 0 not configured
pcib0 at pci0 dev 1 function 0 "NVIDIA nForce4 ISA" rev 0xf3
nviic0 at pci0 dev 1 function 1 "NVIDIA nForce4 SMBus" rev 0xa2
iic0 at nviic0
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-5300CL5
spdmem1 at iic0 addr 0x51: 1GB DDR2 SDRAM non-parity PC2-5300CL5
spdmem2 at iic0 addr 0x52: 2GB DDR2 SDRAM ECC PC2-5300CL5
iic1 at nviic0
ohci0 at pci0 dev 2 function 0 "NVIDIA nForce4 USB" rev 0xa2: apic 2 int 20,
version 1.0, legacy support
ehci0 at pci0 dev 2 function 1 "NVIDIA nForce4 USB" rev 0xa3: apic 2 int 20
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "NVIDIA EHCI root hub" rev 2.00/1.00 addr 1
pciide0 at pci0 dev 6 function 0 "NVIDIA nForce4 IDE" rev 0xf2: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
pciide0: channel 0 disabled (no drives)
pciide0: channel 1 disabled (no drives)
pciide1 at pci0 dev 7 function 0 "NVIDIA nForce4 SATA" rev 0xf3: DMA
pciide1: using apic 2 int 20 for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <SAMSUNG HD103SI>
wd0: 16-sector PIO, LBA48, 953869MB, 1953525168 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 6
wd1 at pciide1 channel 1 drive 0: <SAMSUNG HD103SI>
wd1: 16-sector PIO, LBA48, 953869MB, 1953525168 sectors
wd1(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 6
pciide2 at pci0 dev 8 function 0 "NVIDIA nForce4 SATA" rev 0xf3: DMA
pciide2: using apic 2 int 20 for native-PCI interrupt
wd2 at pciide2 channel 0 drive 0: <SAMSUNG HD103SI>
wd2: 16-sector PIO, LBA48, 953869MB, 1953525168 sectors
wd2(pciide2:0:0): using PIO mode 4, Ultra-DMA mode 6
wd3 at pciide2 channel 1 drive 0: <SAMSUNG HD103SI>
wd3: 16-sector PIO, LBA48, 953869MB, 1953525168 sectors
wd3(pciide2:1:0): using PIO mode 4, Ultra-DMA mode 6
ppb0 at pci0 dev 9 function 0 "NVIDIA nForce4 PCI-PCI" rev 0xf2
pci1 at ppb0 bus 1
eap0 at pci1 dev 6 function 0 "Ensoniq CT5880" rev 0x02: apic 2 int 3
ac97: codec id 0x83847609 (SigmaTel STAC9721/23)
ac97: codec features 18 bit DAC, 18 bit ADC, SigmaTel 3D
audio0 at eap0
midi0 at eap0: <AudioPCI MIDI UART>
vga1 at pci1 dev 7 function 0 "S3 ViRGE DX/GX" rev 0x01
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
nfe0 at pci0 dev 10 function 0 "NVIDIA CK804 LAN" rev 0xf3: apic 2 int 20,
address 00:1d:60:8c:c5:70
atphy0 at nfe0 phy 0: F1 10/100/1000 PHY, rev. 6
ppb1 at pci0 dev 11 function 0 "NVIDIA nForce4 PCIE" rev 0xf3
pci2 at ppb1 bus 2
ppb2 at pci0 dev 12 function 0 "NVIDIA nForce4 PCIE" rev 0xf3
pci3 at ppb2 bus 3
ppb3 at pci0 dev 13 function 0 "NVIDIA nForce4 PCIE" rev 0xf3
pci4 at ppb3 bus 4
ppb4 at pci0 dev 14 function 0 "NVIDIA nForce4 PCIE" rev 0xa3
pci5 at ppb4 bus 5
pchb0 at pci0 dev 24 function 0 "AMD AMD64 0Fh HyperTransport" rev 0x00
pchb1 at pci0 dev 24 function 1 "AMD AMD64 0Fh Address Map" rev 0x00
pchb2 at pci0 dev 24 function 2 "AMD AMD64 0Fh DRAM Cfg" rev 0x00
kate0 at pci0 dev 24 function 3 "AMD AMD64 0Fh Misc Cfg" rev 0x00: core rev
BH-G1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
it0 at isa0 port 0x2e/2: IT8716F rev 1, EC port 0x290
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 "NVIDIA OHCI root hub" rev 1.00/1.00 addr 1
mtrr: Pentium Pro MTRR support
vscsi0 at root
scsibus0 at vscsi0: 256 targets
softraid0 at root
scsibus1 at softraid0: 256 targets
root on wd2a (df4e4e4da26f4f7e.a) swap on wd2b dump on wd2b
