Hi,
I'm trying to Install OpenBSD on an IBM x3550 M3.
Full specs here: http://www.redbooks.ibm.com/abstracts/tips0804.html
OpenBSD 5.0 didn't recognise the disk controller, then I've tried with
the latest 5.1 snapshot (from Feb 13).
The install process didn't have any problem, but once installed it
can't boot and crash.
The keyboard was unresponsive, but using a serial console permit to
enter commands on the ddb.
Here are the full dmesg/trap/trace/ps output.
I've tested bsd.sp and bsd.mp kernels and both have the same problem:
Disabling ACPI solve the problem.
Regards,
Olivier
>> OpenBSD/amd64 BOOT 3.18
boot>
booting hd0a:/bsd: 5669864+1601484+935608+0+617568 [89+499848+323884]=0xd351b8
entry point at 0x1001e0 [7205c766, 34000004, 24448b12, 3cb8a304]
[ using 824664 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2012 OpenBSD. All rights reserved. http://www.OpenBSD.org
OpenBSD 5.1 (GENERIC.MP) #207: Sun Feb 12 09:42:14 MST 2012
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
RTC BIOS diagnostic error 80<clock_battery>
real mem = 17133776896 (16340MB)
avail mem = 16663511040 (15891MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.5 @ 0x7f6bd000 (87 entries)
bios0: vendor IBM Corp. version "-[D6E154AUS-1.13]-" date 09/23/2011
bios0: IBM 94Y7614
acpi0 at bios0: rev 2
acpi0: sleep states S0 S1 S5
acpi0: tables DSDT FACP TCPA APIC MCFG SLIC HPET SSDT SSDT SSDT ERST
acpi0: wakeup devices PCI1(S4) PCI3(S4) PCI6(S4) PCI7(S4) PCI9(S4)
UHC1(S4) UHC2(S4) UHC3(S4) UH
C4(S4) UHC5(S4) EHC1(S4) EHC2(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz, 2400.37 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX
,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,S
SE4.1,SSE4.2,POPCNT,AES,NXE,LONG,LAHF
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: apic clock running at 133MHz
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz, 2400.09 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX
,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,S
SE4.1,SSE4.2,POPCNT,AES,NXE,LONG,LAHF
cpu1: 256KB 64b/line 8-way L2 cache
cpu2 at mainbus0: apid 18 (application processor)
cpu2: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz, 2400.09 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX
,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,S
SE4.1,SSE4.2,POPCNT,AES,NXE,LONG,LAHF
cpu2: 256KB 64b/line 8-way L2 cache
cpu3 at mainbus0: apid 20 (application processor)
cpu3: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz, 2400.09 MHz
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX
,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,S
SE4.1,SSE4.2,POPCNT,AES,NXE,LONG,LAHF
cpu3: 256KB 64b/line 8-way L2 cache
cpu4 at mainbus0: apid 1 (application processor)
[22/639]
cpu4: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz, 2400.09 MHz
cpu4:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX
,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,S
SE4.1,SSE4.2,POPCNT,AES,NXE,LONG,LAHF
cpu4: 256KB 64b/line 8-way L2 cache
cpu5 at mainbus0: apid 3 (application processor)
cpu5: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz, 2400.09 MHz
cpu5:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX
,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,S
SE4.1,SSE4.2,POPCNT,AES,NXE,LONG,LAHF
cpu5: 256KB 64b/line 8-way L2 cache
cpu6 at mainbus0: apid 19 (application processor)
cpu6: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz, 2400.09 MHz
cpu6:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX
,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,S
SE4.1,SSE4.2,POPCNT,AES,NXE,LONG,LAHF
cpu6: 256KB 64b/line 8-way L2 cache
cpu7 at mainbus0: apid 21 (application processor)
cpu7: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz, 2400.09 MHz
cpu7:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX
,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,S
SE4.1,SSE4.2,POPCNT,AES,NXE,LONG,LAHF
cpu7: 256KB 64b/line 8-way L2 cache
ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins
ioapic1 at mainbus0: apid 9 pa 0xfec80000, version 20, 24 pins
acpimcfg0 at acpi0 addr 0x80000000, bus 0-255
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 11 (PCI1)
acpiprt2 at acpi0: bus 21 (PCI3)
acpiprt3 at acpi0: bus -1 (PCI6)
acpiprt4 at acpi0: bus 26 (PCI7)
acpiprt5 at acpi0: bus -1 (PCI9)
acpicpu0 at acpi0uvm_fault(0xffffffff80d33f40, 0x0, 0, 1) -> e
kernel: page fault trap, code=0
Stopped at acpicpu_getpss+0x193: movq 0(%rax),%rdi
acpicpu_getpss() at acpicpu_getpss+0x193
acpicpu_attach() at acpicpu_attach+0x154
config_attach() at config_attach+0x1d4
acpi_add_device() at acpi_add_device+0x9d
aml_walknodes() at aml_walknodes+0x7b
aml_walknodes() at aml_walknodes+0x51
aml_walknodes() at aml_walknodes+0x51
acpi_attach() at acpi_attach+0x508
config_attach() at config_attach+0x1d4
bios_attach() at bios_attach+0x218
end trace frame: 0xffffffff80e3bd90, count: 0
ddb{0}> trace
acpicpu_getpss() at acpicpu_getpss+0x193
acpicpu_attach() at acpicpu_attach+0x154
config_attach() at config_attach+0x1d4
acpi_add_device() at acpi_add_device+0x9d
aml_walknodes() at aml_walknodes+0x7b
aml_walknodes() at aml_walknodes+0x51
aml_walknodes() at aml_walknodes+0x51
acpi_attach() at acpi_attach+0x508
config_attach() at config_attach+0x1d4
bios_attach() at bios_attach+0x218
config_attach() at config_attach+0x1d4
mainbus_attach() at mainbus_attach+0x53
config_attach() at config_attach+0x1d4
cpu_configure() at cpu_configure+0x17
main() at main+0x405
end trace frame: 0x0, count: -15
ddb{0}> ps
PID PPID PGRP UID S FLAGS WAIT COMMAND
* 0 -1 0 0 7 0x200 swapper
ddb{0}>
