Synopsis: Intel S1200BTS: hangs during boot
Category: Kernel
System: OpenBSD 5.1
Details: OpenBSD 5.1-current (GENERIC) #186: Wed Mar 14 17:51:43 MDT 2012
Architecture: OpenBSD.amd64
Machine: Intel S1200BTS Motherboard, Intel Xeon E3-1270 CPU (3,4Ghz), 2x Intel
Quad Port 82576 NICs.
Note: This behavior is very similar to the one sent in by Martin Grant January
7, titled "Kernel freezes during boot when initalizing acpiec0" (his MB is an
Intel S1200BTL, mine is a S1200BTS).
This has also been tested with the 5.0 release with the same results.
Description:
After install, the kernel freezes during boot when it gets to "acpiec0 at
acpi0" after which it becomes completly unresponsive.
I have tested three scenerarios:
1. No modifications to the kernel: the kernel freezes at "acpiec0 at acpi0".
2. With acpi0 disabled: The kernel hangs at "ehci_sync_hc: tsleep() = 35" for
about five minutes, then completes the boot.
3. With bios0 disabled: The kernel boots without problem, but the MSI feature
of the em(4) is disabled.
How-to-repeat:
Install with the hardware mentioned above. Reboot.
Fix:
N/A, disabling acpi0 or bios0 gives unwanted side effects.
Attached:
1. dmesg of boot without kernel mods.
2. dmesg of boot with acpi0 disabled
3. dmesg of boot with bios0 disabled
Best regards,
Peter Hallin, Lund University
#############################################################################
1. dmesg of boot without kernel mods
#############################################################################
booting hd0a:/bsd: 5664360+1605580+935808+0+634432 [89+500208+324612]=0xd387d8
entry point at 0x1001e0 [7205c766, 34000004, 24448b12, 6cb8a304]
[ using 825752 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2012 OpenBSD. All rights reserved. http://www.OpenBSD.org
uvm_km_kmem_grow: grown to 0xffff800100000000
OpenBSD 5.1-current (GENERIC) #186: Wed Mar 14 17:51:43 MDT 2012
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC
real mem = 1857626112 (1771MB)
avail mem = 1785929728 (1703MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xeb000 (56 entries)
bios0: vendor Intel Corp. version "S1200BT.86B.01.00.0032.110720111133" date
11/07/2011
bios0: Intel Corporation SandyBridge Platform
acpi0 at bios0: rev 2
acpi0: sleep states S0 S1 S3 S5
acpi0: tables DSDT FACP APIC SPMI MCFG WDDT HPET SSDT BOOT SSDT SSDT SSDT SSDT
SSDT SSDT HEST BERT ERST EINJ
acpi0: wakeup devices ECIR(S4) PXSX(S4) RP01(S3) PXSX(S4) RP02(S3) PXSX(S4)
RP03(S3) PXSX(S4) RP04(S3) PXSX(S4) RP05(S3) GBE2(S3) PXSX(S4) RP06(S3)
PXSX(S4) RP07(S3) PXSX(S4) RP08(S3) P0P1(S3)
+PEG0(S3) PEGP(S3) PEG1(S3) PEG2(S3) PEG3(S3) GLAN(S3) EHC1(S3) EHC2(S3)
HDEF(S3) SLPB(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Xeon(R) CPU E31270 @ 3.40GHz, 3392.74 MHz
cpu0:
+FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2A
+PIC,POPCNT,AES,XSAVE,AVX,NXE,LONG,LAHF
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: apic clock running at 99MHz
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 8 (RP01)
acpiprt2 at acpi0: bus -1 (RP02)
acpiprt3 at acpi0: bus -1 (RP03)
acpiprt4 at acpi0: bus -1 (RP04)
acpiprt5 at acpi0: bus 14 (RP05)
acpiprt6 at acpi0: bus -1 (RP06)
acpiprt7 at acpi0: bus -1 (RP07)
acpiprt8 at acpi0: bus -1 (RP08)
acpiprt9 at acpi0: bus 15 (P0P1)
acpiprt10 at acpi0: bus 1 (PEG0)
acpiprt11 at acpi0: bus 2 (PEG1)
acpiprt12 at acpi0: bus -1 (PEG2)
acpiprt13 at acpi0: bus -1 (PEG3)
acpiec0 at acpi0
#############################################################################
2. dmesg of boot with acpi0 disabled
#############################################################################
>> OpenBSD/amd64 BOOT 3.18
boot> boot bsd -c
booting hd0a:bsd: 5664360+1605580+935808+0+634432 [89+500208+324612]=0xd387d8
entry point at 0x1001e0 [7205c766, 34000004, 24448b12, 6cb8a304]
[ using 825752 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2012 OpenBSD. All rights reserved. http://www.OpenBSD.org
uvm_km_kmem_grow: grown to 0xffff800100000000
OpenBSD 5.1-current (GENERIC) #186: Wed Mar 14 17:51:43 MDT 2012
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC
real mem = 1857626112 (1771MB)
avail mem = 1785929728 (1703MB)
User Kernel Config
UKC> disable acpi
332 acpi0 disabled
UKC> quit
Continuing...
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xeb000 (56 entries)
bios0: vendor Intel Corp. version "S1200BT.86B.01.00.0032.110720111133" date
11/07/2011
bios0: Intel Corporation SandyBridge Platform
acpi at bios0 not configured
mpbios0 at bios0: Intel MP Specification 1.4
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Xeon(R) CPU E31270 @ 3.40GHz, 3392.80 MHz
cpu0:
+FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2A
+PIC,POPCNT,AES,XSAVE,AVX,NXE,LONG,LAHF
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: apic clock running at 99MHz
mpbios0: bus 0 is type PCI
mpbios0: bus 1 is type PCI
mpbios0: bus 2 is type PCI
mpbios0: bus 3 is type PCI
mpbios0: bus 4 is type PCI
mpbios0: bus 6 is type PCI
mpbios0: bus 8 is type PCI
mpbios0: bus 9 is type PCI
mpbios0: bus 10 is type PCI
mpbios0: bus 12 is type PCI
mpbios0: bus 14 is type PCI
mpbios0: bus 15 is type PCI
mpbios0: bus 16 is type ISA
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
mpbios: can't find ioapic 0
mpbios: can't find ioapic 0
mpbios: can't find ioapic 0
mpbios: can't find ioapic 0
mpbios: can't find ioapic 0
mpbios: can't find ioapic 0
mpbios: can't find ioapic 0
mpbios: can't find ioapic 0
mpbios: can't find ioapic 0
mpbios: can't find ioapic 0
mpbios: can't find ioapic 0
mpbios: can't find ioapic 0
mpbios: can't find ioapic 0
mpbios: can't find ioapic 0
mpbios: can't find ioapic 0
mpbios: can't find ioapic 0
mpbios: can't find ioapic 0
mpbios: can't find ioapic 0
mpbios: can't find ioapic 0
mpbios: can't find ioapic 0
mpbios: can't find ioapic 0
mpbios: can't find ioapic 0
mpbios: can't find ioapic 0
mpbios: can't find ioapic 0
mpbios: can't find ioapic 0
mpbios: can't find ioapic 0
ipmi at mainbus0 not configured
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Xeon E3-1200 Host" rev 0x09
ppb0 at pci0 dev 1 function 0 "Intel Core 2G PCIE" rev 0x09: msi
pci1 at ppb0 bus 1
ppb1 at pci0 dev 1 function 1 "Intel Core 2G PCIE" rev 0x09: msi
pci2 at ppb1 bus 2
ppb2 at pci2 dev 0 function 0 "IDT 89HPES12N3A" rev 0x0c
pci3 at ppb2 bus 3
ppb3 at pci3 dev 2 function 0 "IDT 89HPES12N3A" rev 0x0c
pci4 at ppb3 bus 4
em0 at pci4 dev 0 function 0 "Intel PRO/1000 QP (82576)" rev 0x01: msi, address
90:e2:ba:06:a6:9c
em1 at pci4 dev 0 function 1 "Intel PRO/1000 QP (82576)" rev 0x01: msi, address
90:e2:ba:06:a6:9d
ppb4 at pci3 dev 4 function 0 "IDT 89HPES12N3A" rev 0x0c
pci5 at ppb4 bus 6
em2 at pci5 dev 0 function 0 "Intel PRO/1000 QP (82576)" rev 0x01: msi, address
90:e2:ba:06:a6:9e
em3 at pci5 dev 0 function 1 "Intel PRO/1000 QP (82576)" rev 0x01: msi, address
90:e2:ba:06:a6:9f
em4 at pci0 dev 25 function 0 "Intel 82579LM" rev 0x05: msi, address
00:1e:67:33:e2:b3
ehci0 at pci0 dev 26 function 0 "Intel 6 Series USB" rev 0x05: apic 2 int 11
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb5 at pci0 dev 28 function 0 "Intel 6 Series PCIE" rev 0xb5: msi
pci6 at ppb5 bus 8
ppb6 at pci6 dev 0 function 0 "IDT 89HPES12N3A" rev 0x0c
pci7 at ppb6 bus 9
ppb7 at pci7 dev 2 function 0 "IDT 89HPES12N3A" rev 0x0c
pci8 at ppb7 bus 10
em5 at pci8 dev 0 function 0 "Intel PRO/1000 QP (82576)" rev 0x01: msi, address
00:1b:21:c8:8f:e4
em6 at pci8 dev 0 function 1 "Intel PRO/1000 QP (82576)" rev 0x01: msi, address
00:1b:21:c8:8f:e5
ppb8 at pci7 dev 4 function 0 "IDT 89HPES12N3A" rev 0x0c
pci9 at ppb8 bus 12
em7 at pci9 dev 0 function 0 "Intel PRO/1000 QP (82576)" rev 0x01: msi, address
00:1b:21:c8:8f:e6
em8 at pci9 dev 0 function 1 "Intel PRO/1000 QP (82576)" rev 0x01: msi, address
00:1b:21:c8:8f:e7
ppb9 at pci0 dev 28 function 4 "Intel 6 Series PCIE" rev 0xb5: msi
pci10 at ppb9 bus 14
em9 at pci10 dev 0 function 0 "Intel PRO/1000 MT (82574L)" rev 0x00: msi,
address 00:1e:67:33:e2:b2
ehci1 at pci0 dev 29 function 0 "Intel 6 Series USB" rev 0x05: apic 2 int 10
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb10 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xa5
pci11 at ppb10 bus 15
vga1 at pci11 dev 2 function 0 "Silicon Motion LynxEM+" rev 0xb0
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 31 function 0 "Intel C202 LPC" rev 0x05
ahci0 at pci0 dev 31 function 2 "Intel 6 Series AHCI" rev 0x05: msi, AHCI 1.3
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, WDC WD5000AZRX-0, 01.0> SCSI3 0/direct
fixed naa.50014ee05872b3eb
sd0: 476940MB, 512 bytes/sector, 976773168 sectors
cd0 at scsibus0 targ 5 lun 0: <TSSTcorp, CDDVDW SH-222BB, SB00> ATAPI 5/cdrom
removable
ichiic0 at pci0 dev 31 function 3 "Intel 6 Series SMBus" rev 0x05: apic 2 int 11
iic0 at ichiic0
sdtemp0 at iic0 addr 0x19: mcp98243
sdtemp1 at iic0 addr 0x1b: mcp98243
spdmem0 at iic0 addr 0x51: 1GB DDR3 SDRAM ECC PC3-10600 with thermal sensor
spdmem1 at iic0 addr 0x53: 1GB DDR3 SDRAM ECC PC3-10600 with thermal sensor
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
wbsio0 at isa0 port 0x2e/2: W83627DHG-P rev 0x73
lm1 at wbsio0 port 0x290/8: W83627DHG
mtrr: Pentium Pro MTRR support
ehci_sync_hc: tsleep() = 35
ehci_sync_hc: tsleep() = 35
ehci_sync_hc: tsleep() = 35
ehci_sync_hc: tsleep() = 35
ehci_sync_hc: tsleep() = 35
ehci_sync_hc: tsleep() = 35
ehci_sync_hc: tsleep() = 35
ehci_sync_hc: tsleep() = 35
ehci_sync_hc: tsleep() = 35
ehci_sync_hc: tsleep() = 35
ehci_sync_hc: tsleep() = 35
ehci_sync_hc: tsleep() = 35
ehci_sync_hc: tsleep() = 35
ehci_sync_hc: tsleep() = 35
ehci_sync_hc: tsleep() = 35
uhub0: device problem, disabling port 1
ehci_sync_hc: tsleep() = 35
ehci_sync_hc: tsleep() = 35
ehci_sync_hc: tsleep() = 35
ehci_sync_hc: tsleep() = 35
ehci_sync_hc: tsleep() = 35
ehci_sync_hc: tsleep() = 35
ehci_sync_hc: tsleep() = 35
ehci_sync_hc: tsleep() = 35
ehci_sync_hc: tsleep() = 35
ehci_sync_hc: tsleep() = 35
ehci_sync_hc: tsleep() = 35
ehci_sync_hc: tsleep() = 35
ehci_sync_hc: tsleep() = 35
uhub1: device problem, disabling port 1
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on sd0a (c3f2adff1e18f199.a) swap on sd0b dump on sd0b
WARNING: / was not properly unmounted
Automatic boot in progress: starting file system checks.
/dev/sd0a (c3f2adff1e18f199.a): 12857 files, 227395 used, 806796 free (68
frags, 100841 blocks, 0.0% fragmentation)
/dev/sd0a (c3f2adff1e18f199.a): MARKING FILE SYSTEM CLEAN
setting tty flags
kbd: keyboard mapping set to sv
pf enabled
starting network
starting early daemons: syslogd pflogd.
starting RPC daemons:.
savecore: /dev/sd0b: Device not configured
checking quotas: done.
clearing /tmp
starting pre-securelevel daemons:.
setting kernel security level: kern.securelevel: 0 -> 1
creating runtime link editor directory cache.
preserving editor files.
starting network daemons: sendmail inetd sndiod.
starting local daemons: cron.
Fri Mar 16 09:39:21 CET 2012
#############################################################################
3. dmesg of boot with bios0 disabled
#############################################################################
>> OpenBSD/amd64 BOOT 3.18
boot> boot bsd -c
booting hd0a:bsd: 5664360+1605580+935808+0+634432 [89+500208+324612]=0xd387d8
entry point at 0x1001e0 [7205c766, 34000004, 24448b12, 6cb8a304]
[ using 825752 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2012 OpenBSD. All rights reserved. http://www.OpenBSD.org
uvm_km_kmem_grow: grown to 0xffff800100000000
OpenBSD 5.1-current (GENERIC) #186: Wed Mar 14 17:51:43 MDT 2012
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC
real mem = 1857626112 (1771MB)
avail mem = 1785929728 (1703MB)
User Kernel Config
UKC> disable bios
52 bios0 disabled
UKC> quit
Continuing...
mainbus0 at root
bios at mainbus0 not configured
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel(R) Xeon(R) CPU E31270 @ 3.40GHz, 3392.75 MHz
cpu0:
+FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2A
+PIC,POPCNT,AES,XSAVE,AVX,NXE,LONG,LAHF
cpu0: 256KB 64b/line 8-way L2 cache
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Xeon E3-1200 Host" rev 0x09
ppb0 at pci0 dev 1 function 0 "Intel Core 2G PCIE" rev 0x09: irq 11
pci1 at ppb0 bus 1
ppb1 at pci0 dev 1 function 1 "Intel Core 2G PCIE" rev 0x09: irq 10
pci2 at ppb1 bus 2
ppb2 at pci2 dev 0 function 0 "IDT 89HPES12N3A" rev 0x0c
pci3 at ppb2 bus 3
ppb3 at pci3 dev 2 function 0 "IDT 89HPES12N3A" rev 0x0c
pci4 at ppb3 bus 4
em0 at pci4 dev 0 function 0 "Intel PRO/1000 QP (82576)" rev 0x01: irq 5,
address 90:e2:ba:06:a6:9c
em1 at pci4 dev 0 function 1 "Intel PRO/1000 QP (82576)" rev 0x01: irq 11,
address 90:e2:ba:06:a6:9d
ppb4 at pci3 dev 4 function 0 "IDT 89HPES12N3A" rev 0x0c
pci5 at ppb4 bus 6
em2 at pci5 dev 0 function 0 "Intel PRO/1000 QP (82576)" rev 0x01: irq 10,
address 90:e2:ba:06:a6:9e
em3 at pci5 dev 0 function 1 "Intel PRO/1000 QP (82576)" rev 0x01: irq 3,
address 90:e2:ba:06:a6:9f
em4 at pci0 dev 25 function 0 "Intel 82579LM" rev 0x05: irq 5, address
00:1e:67:33:e2:b3
ehci0 at pci0 dev 26 function 0 "Intel 6 Series USB" rev 0x05: irq 11
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb5 at pci0 dev 28 function 0 "Intel 6 Series PCIE" rev 0xb5: irq 11
pci6 at ppb5 bus 8
ppb6 at pci6 dev 0 function 0 "IDT 89HPES12N3A" rev 0x0c
pci7 at ppb6 bus 9
ppb7 at pci7 dev 2 function 0 "IDT 89HPES12N3A" rev 0x0c
pci8 at ppb7 bus 10
em5 at pci8 dev 0 function 0 "Intel PRO/1000 QP (82576)" rev 0x01: irq 3,
address 00:1b:21:c8:8f:e4
em6 at pci8 dev 0 function 1 "Intel PRO/1000 QP (82576)" rev 0x01: irq 5,
address 00:1b:21:c8:8f:e5
ppb8 at pci7 dev 4 function 0 "IDT 89HPES12N3A" rev 0x0c
pci9 at ppb8 bus 12
em7 at pci9 dev 0 function 0 "Intel PRO/1000 QP (82576)" rev 0x01: irq 11,
address 00:1b:21:c8:8f:e6
em8 at pci9 dev 0 function 1 "Intel PRO/1000 QP (82576)" rev 0x01: irq 10,
address 00:1b:21:c8:8f:e7
ppb9 at pci0 dev 28 function 4 "Intel 6 Series PCIE" rev 0xb5: irq 11
pci10 at ppb9 bus 14
em9 at pci10 dev 0 function 0 "Intel PRO/1000 MT (82574L)" rev 0x00: irq 11,
address 00:1e:67:33:e2:b2
ehci1 at pci0 dev 29 function 0 "Intel 6 Series USB" rev 0x05: irq 10
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb10 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xa5
pci11 at ppb10 bus 15
vga1 at pci11 dev 2 function 0 "Silicon Motion LynxEM+" rev 0xb0
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 31 function 0 "Intel C202 LPC" rev 0x05
ahci0 at pci0 dev 31 function 2 "Intel 6 Series AHCI" rev 0x05: irq 5, AHCI 1.3
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, WDC WD5000AZRX-0, 01.0> SCSI3 0/direct
fixed naa.50014ee05872b3eb
sd0: 476940MB, 512 bytes/sector, 976773168 sectors
cd0 at scsibus0 targ 5 lun 0: <TSSTcorp, CDDVDW SH-222BB, SB00> ATAPI 5/cdrom
removable
ichiic0 at pci0 dev 31 function 3 "Intel 6 Series SMBus" rev 0x05: irq 11
iic0 at ichiic0
sdtemp0 at iic0 addr 0x19: mcp98243
sdtemp1 at iic0 addr 0x1b: mcp98243
spdmem0 at iic0 addr 0x51: 1GB DDR3 SDRAM ECC PC3-10600 with thermal sensor
spdmem1 at iic0 addr 0x53: 1GB DDR3 SDRAM ECC PC3-10600 with thermal sensor
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
wbsio0 at isa0 port 0x2e/2: W83627DHG-P rev 0x73
lm1 at wbsio0 port 0x290/8: W83627DHG
mtrr: Pentium Pro MTRR support
uhub2 at uhub0 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
uhub3 at uhub1 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
uhidev0 at uhub3 port 3 configuration 1 interface 0 "CHICONY HP Basic USB
Keyboard" rev 1.10/3.00 addr 3
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on sd0a (c3f2adff1e18f199.a) swap on sd0b dump on sd0b
WARNING: / was not properly unmounted
Automatic boot in progress: starting file system checks.
/dev/sd0a (c3f2adff1e18f199.a): 12857 files, 227399 used, 806792 free (72
frags, 100840 blocks, 0.0% fragmentation)
/dev/sd0a (c3f2adff1e18f199.a): MARKING FILE SYSTEM CLEAN
setting tty flags
kbd: keyboard mapping set to sv
pf enabled
starting network
starting early daemons: syslogd pflogd.
starting RPC daemons:.
savecore: /dev/sd0b: Device not configured
checking quotas: done.
clearing /tmp
starting pre-securelevel daemons:.
setting kernel security level: kern.securelevel: 0 -> 1
creating runtime link editor directory cache.
preserving editor files.
starting network daemons: sendmail inetd sndiod.
starting local daemons: cron.
Fri Mar 16 09:46:25 CET 2012
#############################################################################
#############################################################################
