Hi!
At various occasions (the system is not specifically under load or doing much work) this firewall steps into ddb (but as it needs to provide internet it reboots at panics). Here is the trace from the logs and some other informations. Somehow it has never made a core dump under /var/crash. If this is not enough, I'll try to manage to get more information when it enters ddb. I've run memtest for hours, but didn't show any errors. Despite of that, I think I can scavenge some other modules for replacement if that is suspected. Also there is a Silicon Image PCI 2 port SATA150 card, and the two hard drives hang on it. (Panic and dmesg) * 2: --------------------------# 1 #-------------------------- /bsd: uvm_fault(0xd87be4f4, 0x0, 0, 1) -> e /bsd: fatal page fault (6) in supervisor mode /bsd: trap type 6 code 0 eip d05213b3 cs 8 eflags 10203 cr2 14 cpl 90 /bsd: panic: trap type 6, code=0, pc=d05213b3 /bsd: Starting stack trace... /bsd: panic(d08d78d8,de4deb3c,d08db29e,de4deb3c,d09bdd14) at panic+0x6a /bsd: panic(d08db29e,6,0,d05213b3,8) at panic+0x6a /bsd: trap() at trap+0x7f9 /bsd: --- trap (number -777447488) --- /bsd: Bad frame pointer: 0xd1a84b38 /bsd: 0: /bsd: End of stack trace. /bsd: syncing disks... panic: assertwaitok: non-zero mutex count: 1 /bsd: Starting stack trace... /bsd: panic(d08d78d8,de4de74c,de4de760,d0565f0a,d09cf560) at panic+0x6a /bsd: panic(d08b78fc,1,de4de780,d03f16a7,0) at panic+0x6a /bsd: assertwaitok(0,dc00,de4de780,d06084ed,0) at assertwaitok+0x3e /bsd: pool_get(d0a2e460,9,1,ffffffca,aad5a0) at pool_get+0x97 /bsd: buf_get(d8e1c4e8,aad5a0,0,4000,d0203151) at buf_get+0x175 /bsd: getblk(d8e1c4e8,aad5a0,0,4000,0) at getblk+0x6c /bsd: bio_doread(d8e1c4e8,aad5a0,0,4000,0) at bio_doread+0x42 /bsd: bread(d8e1c4e8,aad5a0,0,4000,de4de95c) at bread+0x32 /bsd: ffs_update(d884632c,0,0,0,d884736c,4,0) at ffs_update+0x243 /bsd: ffs_fsync(de4de9b0,d8821a70,d884736c,d8803c84,2) at ffs_fsync+0x292 /bsd: VOP_FSYNC(d884736c,d8803c84,2,d8821a70,d2f72c00) at VOP_FSYNC+0x35 /bsd: ffs_sync_vnode(d884736c,de4dea30,8,d2f75800,d8803c00) at ffs_sync_vnode+0x70 /bsd: vfs_mount_foreach_vnode(d2f72c00,d04efd30,de4dea30,d8821a70,d8a92cf4) at vfs_mount_foreach_vnode+0x2a /bsd: ffs_sync(d2f72c00,2,d8803c84,d8821a70,0) at ffs_sync+0x7a /bsd: sys_sync(d8821a70,0,0,0,de4deabc) at sys_sync+0xa1 /bsd: vfs_syncwait(1,0,d1a84b38,de4deb3c,de4deadc) at vfs_syncwait+0x2e /bsd: vfs_shutdown(d08b188b,1,fe,d08ab142,d03f3420) at vfs_shutdown+0x39 /bsd: boot(100,de4deb3c,d08db29e,de4deb3c,d09bdd14) at boot+0x18a /bsd: panic(d08db29e,6,0,d05213b3,8) at panic+0x65 /bsd: trap() at trap+0x7f9 /bsd: --- trap (number -777447488) --- /bsd: Bad frame pointer: 0xd1a84b38 /bsd: 0: /bsd: End of stack trace. /bsd: pppoe0: workq_add_task(sppp_clear_ip_addrs) /bsd: OpenBSD 5.1-stable (GENERIC) #0: Fri Jul 20 14:46:08 CEST 2012 /bsd: [email protected]:/usr/src/sys/arch/i386/compile/GENERIC /bsd: cpu0: Intel(R) Pentium(R) 4 CPU 2.40GHz ("GenuineIntel" 686-class) 2.42 GHz /bsd: cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID /bsd: real mem = 2146955264 (2047MB) /bsd: avail mem = 2101735424 (2004MB) /bsd: mainbus0 at root /bsd: bios0 at mainbus0: AT/286+ BIOS, date 11/05/02, BIOS32 rev. 0 @ 0xfdb60, SMBIOS rev. 2.3 @ 0xf0630 (32 entries) /bsd: bios0: vendor American Megatrends Inc. version "V1.2 11" date 11/05/2002 /bsd: bios0: MICRO-STAR INC. MS-6704 /bsd: acpi0 at bios0: rev 0 /bsd: acpi0: sleep states S0 S1 S4 S5 /bsd: acpi0: tables DSDT FACP APIC /bsd: acpi0: wakeup devices USB1(S3) USB2(S3) USB3(S3) EHCI(S3) ICHB(S4) PS2M(S4) PS2K(S4) UAR1(S4) MC9_(S4) /bsd: acpitimer0 at acpi0: 3579545 Hz, 24 bits /bsd: acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat /bsd: cpu0 at mainbus0: apid 0 (boot processor) /bsd: cpu0: apic clock running at 133MHz /bsd: ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins /bsd: acpiprt0 at acpi0: bus 0 (PCI0) /bsd: acpiprt1 at acpi0: bus 2 (ICHB) /bsd: acpicpu0 at acpi0 /bsd: acpipwrres0 at acpi0: URP1 /bsd: acpipwrres1 at acpi0: URP2 /bsd: acpipwrres2 at acpi0: FDDP /bsd: acpipwrres3 at acpi0: LPTP /bsd: acpibtn0 at acpi0: PWRB /bsd: bios0: ROM list: 0xc0000/0xd000 0xcd000/0x4800 0xd1800/0x1000 0xe0000/0x1000 /bsd: pci0 at mainbus0 bus 0: configuration mode 1 (bios) /bsd: pchb0 at pci0 dev 0 function 0 "Intel 82845G Host" rev 0x02 /bsd: intelagp0 at pchb0 /bsd: agp0 at intelagp0: aperture at 0xe0000000, size 0x4000000 /bsd: ppb0 at pci0 dev 1 function 0 "Intel 82845G AGP" rev 0x02 /bsd: pci1 at ppb0 bus 1 /bsd: vga1 at pci1 dev 0 function 0 "ATI Radeon 9600" rev 0x00 /bsd: wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) /bsd: wsdisplay0: screen 1-5 added (80x25, vt100 emulation) /bsd: radeondrm0 at vga1: apic 2 int 16 /bsd: drm0 at radeondrm0 /bsd: "ATI Radeon 9600 XT Sec" rev 0x00 at pci1 dev 0 function 1 not configured /bsd: uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x02: apic 2 int 16 /bsd: uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x02: apic 2 int 19 /bsd: uhci2 at pci0 dev 29 function 2 "Intel 82801DB USB" rev 0x02: apic 2 int 18 /bsd: ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x02: apic 2 int 23 /bsd: usb0 at ehci0: USB revision 2.0 /bsd: uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 /bsd: ppb1 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x82 /bsd: pci2 at ppb1 bus 2 /bsd: pciide0 at pci2 dev 3 function 0 "CMD Technology SiI3512 SATA" rev 0x01: DMA /bsd: pciide0: using apic 2 int 19 for native-PCI interrupt /bsd: pciide0: port 0: device present, speed: 1.5Gb/s /bsd: wd0 at pciide0 channel 0 drive 0: <ST3250310AS> /bsd: wd0: 16-sector PIO, LBA48, 238475MB, 488397168 sectors /bsd: wd0(pciide0:0:0): using BIOS timings, Ultra-DMA mode 5 /bsd: pciide0: port 1: device present, speed: 1.5Gb/s /bsd: wd1 at pciide0 channel 1 drive 0: <SAMSUNG HD501LJ> /bsd: wd1: 16-sector PIO, LBA48, 476940MB, 976773168 sectors /bsd: wd1(pciide0:1:0): using BIOS timings, Ultra-DMA mode 7 /bsd: em0 at pci2 dev 4 function 0 "Intel PRO/1000GT (82541GI)" rev 0x05: apic 2 int 16, address 00:1b:21:0a:aa:12 /bsd: vge0 at pci2 dev 5 function 0 "VIA VT612x" rev 0x11: apic 2 int 17, address 00:04:e2:76:98:d0 /bsd: ciphy0 at vge0 phy 1: CS8201 10/100/1000TX PHY, rev. 1 /bsd: ichpcib0 at pci0 dev 31 function 0 "Intel 82801DB LPC" rev 0x02 /bsd: ichiic0 at pci0 dev 31 function 3 "Intel 82801DB SMBus" rev 0x02: apic 2 int 17 /bsd: iic0 at ichiic0 /bsd: iic0: addr 0x2f 00=00 02=0f 03=00 04=00 06=0f 07=00 08=00 0a=06 0b=00 0c=00 0d=07 0e=85 0f=00 10=c4 11=10 12=00 13=60 words 00=00ff 01=ffff 02=0fff 03=00ff 04=00ff 05=ffff 06=0fff 07=00ff /bsd: spdmem0 at iic0 addr 0x50: 1GB DDR SDRAM non-parity PC3200CL3.0 /bsd: spdmem1 at iic0 addr 0x51: 1GB DDR SDRAM non-parity PC3200CL3.0 /bsd: usb1 at uhci0: USB revision 1.0 /bsd: uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1 /bsd: usb2 at uhci1: USB revision 1.0 /bsd: uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 /bsd: usb3 at uhci2: USB revision 1.0 /bsd: uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 /bsd: isa0 at ichpcib0 /bsd: isadma0 at isa0 /bsd: com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo /bsd: pckbc0 at isa0 port 0x60/5 /bsd: pckbd0 at pckbc0 (kbd slot) /bsd: pckbc0: using irq 1 for kbd slot /bsd: wskbd0 at pckbd0: console keyboard, using wsdisplay0 /bsd: pcppi0 at isa0 port 0x61 /bsd: spkr0 at pcppi0 /bsd: lpt0 at isa0 port 0x378/4 irq 7 /bsd: wbsio0 at isa0 port 0x2e/2: W83627HF rev 0x17 /bsd: lm1 at wbsio0 port 0x290/8: W83627HF /bsd: npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 /bsd: fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 /bsd: fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec /bsd: mtrr: Pentium Pro MTRR support /bsd: vscsi0 at root /bsd: scsibus0 at vscsi0: 256 targets /bsd: softraid0 at root /bsd: scsibus1 at softraid0: 256 targets /bsd: root on wd0a (69dbc259cb64de66.a) swap on wd0b dump on wd0b /bsd: WARNING: / was not properly unmounted /bsd: pppoe0: received unexpected PADO last message repeated 12 times /bsd: pppoe0: workq_add_task(sppp_set_ip_addrs) /bsd: pppoe0: sppp_set_ip_addrs succeeded savecore: no core dump --------------------------# 2 #-------------------------- /bsd: uvm_fault(0xd0a26120, 0x0, 0, 1) -> e /bsd: fatal page fault (6) in supervisor mode /bsd: trap type 6 code 0 eip d05226cb cs 8 eflags 10206 cr2 42 cpl 90 /bsd: panic: trap type 6, code=0, pc=d05226cb /bsd: Starting stack trace... /bsd: panic(d08d7778,de240cf0,d08db13e,de240cf0,d09bdd14) at panic+0x6a /bsd: panic(d08db13e,6,0,d05226cb,8) at panic+0x6a /bsd: trap() at trap+0x7f9 /bsd: --- trap (number 10) --- /bsd: Bad frame pointer: 0xd1e3f244 /bsd: 0: /bsd: End of stack trace. /bsd: syncing disks... panic: mtx_enter: locking against myself /bsd: Starting stack trace... /bsd: panic(d08d7778,de240584,0,0,0) at panic+0x6a /bsd: panic(d020307c,de2405b4,d05246e8,d0a44d58,0) at panic+0x6a /bsd: mtx_enter(d0a44d58,0,de2405b4,d051d490,d0a2e558) at mtx_enter+0x60 /bsd: uvm_pmr_freepages(d2367bac,1,0,de240638,0) at uvm_pmr_freepages+0x128 /bsd: uvm_pagefree(d2367bac,59f75000,c,0,0) at uvm_pagefree+0x132 /bsd: buf_free_pages(d8286380,4000,0,d8286380,4) at buf_free_pages+0xab /bsd: buf_dealloc_mem(d8286380,d08b8c3b,dd14f000,de240678,de240658) at buf_dealloc_mem+0x51 /bsd: buf_put(d8286380,ffffe000,3,d0a52760,0) at buf_put+0xca /bsd: buf_get(d805eabc,0,0,4000,d04a338e) at buf_get+0x147 /bsd: getblk(d805eabc,0,0,4000,0) at getblk+0x6c /bsd: bio_doread(d805eabc,0,0,4000,0) at bio_doread+0x42 /bsd: bread(d805eabc,0,0,4000,de2409e0) at bread+0x32 /bsd: ffs1_balloc(d8248a54,0,0,1000,d8e51000) at ffs1_balloc+0x92f /bsd: ffs_write(de240a04,1,d805eabc,de240a4c,0) at ffs_write+0x1b0 /bsd: VOP_WRITE(d805eabc,de240a4c,0,d8e51000,0) at VOP_WRITE+0x38 /bsd: uvn_io(d805eabc,de240b7c,1,31,1) at uvn_io+0x218 /bsd: uvn_put(d805eabc,de240b7c,1,31,31) at uvn_put+0x2e /bsd: uvm_pager_put(d805eabc,d20e022c,de240bc0,de240bbc,31) at uvm_pager_put+0xc4 /bsd: uvn_flush(d805eabc,0,0,0,0) at uvn_flush+0x34a /bsd: uvm_vnp_sync(d2f74800,5,100,d09e13a0,d09bdd14) at uvm_vnp_sync+0xd5 /bsd: sys_sync(d8e48cf8,0,0,0,de240c70) at sys_sync+0x80 /bsd: vfs_syncwait(1,0,d1e3f244,de240cf0,de240c90) at vfs_syncwait+0x2e /bsd: vfs_shutdown(d08b17cb,1,fe,d08ab082,d03f3420) at vfs_shutdown+0x39 /bsd: boot(100,de240cf0,d08db13e,de240cf0,d09bdd14) at boot+0x18a /bsd: panic(d08db13e,6,0,d05226cb,8) at panic+0x65 /bsd: trap() at trap+0x7f9 /bsd: --- trap (number 10) --- /bsd: Bad frame pointer: 0xd1e3f244 /bsd: 0: /bsd: End of stack trace. /bsd: OpenBSD 5.1-stable (GENERIC) #0: Mon Jul 23 13:40:08 CEST 2012 /bsd: [email protected]:/usr/src/sys/arch/i386/compile/GENERIC /bsd: cpu0: Intel(R) Pentium(R) 4 CPU 2.40GHz ("GenuineIntel" 686-class) 2.42 GHz /bsd: cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID /bsd: real mem = 2146955264 (2047MB) /bsd: avail mem = 2101735424 (2004MB) /bsd: mainbus0 at root /bsd: bios0 at mainbus0: AT/286+ BIOS, date 11/05/02, BIOS32 rev. 0 @ 0xfdb60, SMBIOS rev. 2.3 @ 0xf0630 (32 entries) /bsd: bios0: vendor American Megatrends Inc. version "V1.2 11" date 11/05/2002 /bsd: bios0: MICRO-STAR INC. MS-6704 /bsd: acpi0 at bios0: rev 0 /bsd: acpi0: sleep states S0 S1 S4 S5 /bsd: acpi0: tables DSDT FACP APIC /bsd: acpi0: wakeup devices USB1(S3) USB2(S3) USB3(S3) EHCI(S3) ICHB(S4) PS2M(S4) PS2K(S4) UAR1(S4) MC9_(S4) /bsd: acpitimer0 at acpi0: 3579545 Hz, 24 bits /bsd: acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat /bsd: cpu0 at mainbus0: apid 0 (boot processor) /bsd: cpu0: apic clock running at 133MHz /bsd: ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins /bsd: acpiprt0 at acpi0: bus 0 (PCI0) /bsd: acpiprt1 at acpi0: bus 2 (ICHB) /bsd: acpicpu0 at acpi0 /bsd: acpipwrres0 at acpi0: URP1 /bsd: acpipwrres1 at acpi0: URP2 /bsd: acpipwrres2 at acpi0: FDDP /bsd: acpipwrres3 at acpi0: LPTP /bsd: acpibtn0 at acpi0: PWRB /bsd: bios0: ROM list: 0xc0000/0xd000 0xcd000/0x4800 0xd1800/0x1000 0xe0000/0x1000 /bsd: pci0 at mainbus0 bus 0: configuration mode 1 (bios) /bsd: pchb0 at pci0 dev 0 function 0 "Intel 82845G Host" rev 0x02 /bsd: intelagp0 at pchb0 /bsd: agp0 at intelagp0: aperture at 0xe0000000, size 0x4000000 /bsd: ppb0 at pci0 dev 1 function 0 "Intel 82845G AGP" rev 0x02 /bsd: pci1 at ppb0 bus 1 /bsd: vga1 at pci1 dev 0 function 0 "ATI Radeon 9600" rev 0x00 /bsd: wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) /bsd: wsdisplay0: screen 1-5 added (80x25, vt100 emulation) /bsd: radeondrm0 at vga1: apic 2 int 16 /bsd: drm0 at radeondrm0 /bsd: "ATI Radeon 9600 XT Sec" rev 0x00 at pci1 dev 0 function 1 not configured /bsd: uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x02: apic 2 int 16 /bsd: uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x02: apic 2 int 19 /bsd: uhci2 at pci0 dev 29 function 2 "Intel 82801DB USB" rev 0x02: apic 2 int 18 /bsd: ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x02: apic 2 int 23 /bsd: usb0 at ehci0: USB revision 2.0 /bsd: uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 /bsd: ppb1 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x82 /bsd: pci2 at ppb1 bus 2 /bsd: pciide0 at pci2 dev 3 function 0 "CMD Technology SiI3512 SATA" rev 0x01: DMA /bsd: pciide0: using apic 2 int 19 for native-PCI interrupt /bsd: pciide0: port 0: device present, speed: 1.5Gb/s /bsd: wd0 at pciide0 channel 0 drive 0: <ST3250310AS> /bsd: wd0: 16-sector PIO, LBA48, 238475MB, 488397168 sectors /bsd: wd0(pciide0:0:0): using BIOS timings, Ultra-DMA mode 5 /bsd: pciide0: port 1: device present, speed: 1.5Gb/s /bsd: wd1 at pciide0 channel 1 drive 0: <SAMSUNG HD501LJ> /bsd: wd1: 16-sector PIO, LBA48, 476940MB, 976773168 sectors /bsd: wd1(pciide0:1:0): using BIOS timings, Ultra-DMA mode 7 /bsd: em0 at pci2 dev 4 function 0 "Intel PRO/1000GT (82541GI)" rev 0x05: apic 2 int 16, address 00:1b:21:0a:aa:12 /bsd: vge0 at pci2 dev 5 function 0 "VIA VT612x" rev 0x11: apic 2 int 17, address 00:04:e2:76:98:d0 /bsd: ciphy0 at vge0 phy 1: CS8201 10/100/1000TX PHY, rev. 1 /bsd: ichpcib0 at pci0 dev 31 function 0 "Intel 82801DB LPC" rev 0x02 /bsd: ichiic0 at pci0 dev 31 function 3 "Intel 82801DB SMBus" rev 0x02: apic 2 int 17 /bsd: iic0 at ichiic0 /bsd: iic0: addr 0x2f 00=00 02=0f 03=00 04=00 06=0f 07=00 08=00 0a=06 0b=00 0c=00 0d=07 0e=85 0f=00 10=c4 11=10 12=00 13=60 words 00=00ff 01=ffff 02=0fff 03=00ff 04=00ff 05=ffff 06=0fff 07=00ff /bsd: spdmem0 at iic0 addr 0x50: 1GB DDR SDRAM non-parity PC3200CL3.0 /bsd: spdmem1 at iic0 addr 0x51: 1GB DDR SDRAM non-parity PC3200CL3.0 /bsd: usb1 at uhci0: USB revision 1.0 /bsd: uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1 /bsd: usb2 at uhci1: USB revision 1.0 /bsd: uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 /bsd: usb3 at uhci2: USB revision 1.0 /bsd: uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 /bsd: isa0 at ichpcib0 /bsd: isadma0 at isa0 /bsd: com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo /bsd: pckbc0 at isa0 port 0x60/5 /bsd: pckbd0 at pckbc0 (kbd slot) /bsd: pckbc0: using irq 1 for kbd slot /bsd: wskbd0 at pckbd0: console keyboard, using wsdisplay0 /bsd: pcppi0 at isa0 port 0x61 /bsd: spkr0 at pcppi0 /bsd: lpt0 at isa0 port 0x378/4 irq 7 /bsd: wbsio0 at isa0 port 0x2e/2: W83627HF rev 0x17 /bsd: lm1 at wbsio0 port 0x290/8: W83627HF /bsd: npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 /bsd: fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 /bsd: fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec /bsd: mtrr: Pentium Pro MTRR support /bsd: vscsi0 at root /bsd: scsibus0 at vscsi0: 256 targets /bsd: softraid0 at root /bsd: scsibus1 at softraid0: 256 targets /bsd: root on wd0a (69dbc259cb64de66.a) swap on wd0b dump on wd0b /bsd: WARNING: / was not properly unmounted /bsd: pppoe0: received unexpected PADO last message repeated 12 times savecore: no core dump ######### # mount # ######### /dev/wd0a on / type ffs (local, synchronous) /dev/wd0l on /home type ffs (local, nodev, nosuid, softdep) /dev/wd0d on /tmp type ffs (local, nodev, noexec, nosuid, softdep) /dev/wd0f on /usr type ffs (local, nodev, synchronous) /dev/wd0g on /usr/X11R6 type ffs (local, nodev, nosuid, softdep) /dev/wd0h on /usr/local type ffs (local, nodev, softdep) /dev/wd0j on /usr/obj type ffs (local, nodev, nosuid, softdep) /dev/wd0k on /usr/ports type ffs (local, nodev, nosuid, softdep) /dev/wd0i on /usr/src type ffs (local, nodev, nosuid, softdep) /dev/wd0e on /var type ffs (local, nodev, noexec, nosuid) /dev/wd0m on /var/www/bin type ffs (local, nodev, nosuid, synchronous) /dev/wd0n on /var/www/usr type ffs (local, nodev, nosuid, synchronous) /dev/wd1d on /var/www/sites type ffs (local, nodev, noexec, nosuid, with quotas, softdep) /dev/wd1e on /var/mail_virtual type ffs (local, nodev, noexec, nosuid, softdep) /dev/wd1f on /var/database type ffs (local, noexec, nosuid, softdep) ############## # pcidump -v # ############## Domain /dev/pci0: 0:0:0: Intel 82845G Host 0x0000: Vendor ID: 8086 Product ID: 2560 0x0004: Command: 0006 Status ID: 2090 0x0008: Class: 06 Subclass: 00 Interface: 00 Revision: 02 0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 00 0x0010: BAR mem prefetchable 32bit addr: 0xe0000000/0x04000000 0x0014: BAR empty (00000000) 0x0018: BAR empty (00000000) 0x001c: BAR empty (00000000) 0x0020: BAR empty (00000000) 0x0024: BAR empty (00000000) 0x0028: Cardbus CIS: 00000000 0x002c: Subsystem Vendor ID: 0000 Product ID: 0000 0x0030: Expansion ROM Base Address: 00000000 0x0038: 00000000 0x003c: Interrupt Pin: 00 Line: 00 Min Gnt: 00 Max Lat: 00 0x00e4: Capability 0x09: Vendor Specific 0x00a0: Capability 0x02: AGP 0:1:0: Intel 82845G AGP 0x0000: Vendor ID: 8086 Product ID: 2561 0x0004: Command: 0107 Status ID: 00a0 0x0008: Class: 06 Subclass: 04 Interface: 00 Revision: 02 0x000c: BIST: 00 Header Type: 01 Latency Timer: 20 Cache Line Size: 00 0x0010: 00000000 0x0014: 00000000 0x0018: Primary Bus: 0 Secondary Bus: 1 Subordinate Bus: 1 Secondary Latency Timer: 20 0x001c: I/O Base: b0 I/O Limit: b0 Secondary Status: 22a0 0x0020: Memory Base: dfc0 Memory Limit: dfc0 0x0024: Prefetch Memory Base: 9f90 Prefetch Memory Limit: df90 0x0028: Prefetch Memory Base Upper 32 Bits: 00000000 0x002c: Prefetch Memory Limit Upper 32 Bits: 00000000 0x0030: I/O Base Upper 16 Bits: 0000 I/O Limit Upper 16 Bits: 0000 0x0038: Expansion ROM Base Address: 00000000 0x003c: Interrupt Pin: 00 Line: 00 Bridge Control: 000d 0:29:0: Intel 82801DB USB 0x0000: Vendor ID: 8086 Product ID: 24c2 0x0004: Command: 0005 Status ID: 0280 0x0008: Class: 0c Subclass: 03 Interface: 00 Revision: 02 0x000c: BIST: 00 Header Type: 80 Latency Timer: 00 Cache Line Size: 00 0x0010: BAR empty (00000000) 0x0014: BAR empty (00000000) 0x0018: BAR empty (00000000) 0x001c: BAR empty (00000000) 0x0020: BAR io addr: 0x0000e400/0x0020 0x0024: BAR empty (00000000) 0x0028: Cardbus CIS: 00000000 0x002c: Subsystem Vendor ID: 1462 Product ID: 7040 0x0030: Expansion ROM Base Address: 00000000 0x0038: 00000000 0x003c: Interrupt Pin: 01 Line: 0c Min Gnt: 00 Max Lat: 00 0:29:1: Intel 82801DB USB 0x0000: Vendor ID: 8086 Product ID: 24c4 0x0004: Command: 0005 Status ID: 0280 0x0008: Class: 0c Subclass: 03 Interface: 00 Revision: 02 0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 00 0x0010: BAR empty (00000000) 0x0014: BAR empty (00000000) 0x0018: BAR empty (00000000) 0x001c: BAR empty (00000000) 0x0020: BAR io addr: 0x0000e800/0x0020 0x0024: BAR empty (00000000) 0x0028: Cardbus CIS: 00000000 0x002c: Subsystem Vendor ID: 1462 Product ID: 7040 0x0030: Expansion ROM Base Address: 00000000 0x0038: 00000000 0x003c: Interrupt Pin: 02 Line: 03 Min Gnt: 00 Max Lat: 00 0:29:2: Intel 82801DB USB 0x0000: Vendor ID: 8086 Product ID: 24c7 0x0004: Command: 0005 Status ID: 0280 0x0008: Class: 0c Subclass: 03 Interface: 00 Revision: 02 0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 00 0x0010: BAR empty (00000000) 0x0014: BAR empty (00000000) 0x0018: BAR empty (00000000) 0x001c: BAR empty (00000000) 0x0020: BAR io addr: 0x0000ec00/0x0020 0x0024: BAR empty (00000000) 0x0028: Cardbus CIS: 00000000 0x002c: Subsystem Vendor ID: 1462 Product ID: 7040 0x0030: Expansion ROM Base Address: 00000000 0x0038: 00000000 0x003c: Interrupt Pin: 03 Line: 05 Min Gnt: 00 Max Lat: 00 0:29:7: Intel 82801DB USB 0x0000: Vendor ID: 8086 Product ID: 24cd 0x0004: Command: 0006 Status ID: 0290 0x0008: Class: 0c Subclass: 03 Interface: 20 Revision: 02 0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 00 0x0010: BAR mem 32bit addr: 0xdffffc00/0x00000400 0x0014: BAR empty (00000000) 0x0018: BAR empty (00000000) 0x001c: BAR empty (00000000) 0x0020: BAR empty (00000000) 0x0024: BAR empty (00000000) 0x0028: Cardbus CIS: 00000000 0x002c: Subsystem Vendor ID: 1462 Product ID: 3981 0x0030: Expansion ROM Base Address: 00000000 0x0038: 00000000 0x003c: Interrupt Pin: 04 Line: 0a Min Gnt: 00 Max Lat: 00 0x0050: Capability 0x01: Power Management 0x0058: Capability 0x0a: Debug Port 0:30:0: Intel 82801BA Hub-to-PCI 0x0000: Vendor ID: 8086 Product ID: 244e 0x0004: Command: 0107 Status ID: 8080 0x0008: Class: 06 Subclass: 04 Interface: 00 Revision: 82 0x000c: BIST: 00 Header Type: 01 Latency Timer: 00 Cache Line Size: 00 0x0010: 00000000 0x0014: 00000000 0x0018: Primary Bus: 0 Secondary Bus: 2 Subordinate Bus: 2 Secondary Latency Timer: 20 0x001c: I/O Base: c0 I/O Limit: d0 Secondary Status: 2280 0x0020: Memory Base: dfd0 Memory Limit: dfe0 0x0024: Prefetch Memory Base: fff0 Prefetch Memory Limit: 0000 0x0028: Prefetch Memory Base Upper 32 Bits: 00000000 0x002c: Prefetch Memory Limit Upper 32 Bits: 00000000 0x0030: I/O Base Upper 16 Bits: 0000 I/O Limit Upper 16 Bits: 0000 0x0038: Expansion ROM Base Address: 00000000 0x003c: Interrupt Pin: 00 Line: 00 Bridge Control: 0006 0:31:0: Intel 82801DB LPC 0x0000: Vendor ID: 8086 Product ID: 24c0 0x0004: Command: 000f Status ID: 0280 0x0008: Class: 06 Subclass: 01 Interface: 00 Revision: 02 0x000c: BIST: 00 Header Type: 80 Latency Timer: 00 Cache Line Size: 00 0x0010: BAR empty (00000000) 0x0014: BAR empty (00000000) 0x0018: BAR empty (00000000) 0x001c: BAR empty (00000000) 0x0020: BAR empty (00000000) 0x0024: BAR empty (00000000) 0x0028: Cardbus CIS: 00000000 0x002c: Subsystem Vendor ID: 0000 Product ID: 0000 0x0030: Expansion ROM Base Address: 00000000 0x0038: 00000000 0x003c: Interrupt Pin: 00 Line: 00 Min Gnt: 00 Max Lat: 00 0:31:3: Intel 82801DB SMBus 0x0000: Vendor ID: 8086 Product ID: 24c3 0x0004: Command: 0001 Status ID: 0280 0x0008: Class: 0c Subclass: 05 Interface: 00 Revision: 02 0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 00 0x0010: BAR empty (00000000) 0x0014: BAR empty (00000000) 0x0018: BAR empty (00000000) 0x001c: BAR empty (00000000) 0x0020: BAR io addr: 0x00000c00/0x0020 0x0024: BAR empty (00000000) 0x0028: Cardbus CIS: 00000000 0x002c: Subsystem Vendor ID: 1462 Product ID: 7040 0x0030: Expansion ROM Base Address: 00000000 0x0038: 00000000 0x003c: Interrupt Pin: 02 Line: 00 Min Gnt: 00 Max Lat: 00 1:0:0: ATI Radeon 9600 0x0000: Vendor ID: 1002 Product ID: 4152 0x0004: Command: 0007 Status ID: 02b0 0x0008: Class: 03 Subclass: 00 Interface: 00 Revision: 00 0x000c: BIST: 00 Header Type: 80 Latency Timer: 20 Cache Line Size: 08 0x0010: BAR mem prefetchable 32bit addr: 0xc0000000/0x10000000 0x0014: BAR io addr: 0x0000b800/0x0100 0x0018: BAR mem 32bit addr: 0xdfcf0000/0x00010000 0x001c: BAR empty (00000000) 0x0020: BAR empty (00000000) 0x0024: BAR empty (00000000) 0x0028: Cardbus CIS: 00000000 0x002c: Subsystem Vendor ID: 174b Product ID: 0200 0x0030: Expansion ROM Base Address: dfcc0000 0x0038: 00000000 0x003c: Interrupt Pin: 01 Line: 0c Min Gnt: 08 Max Lat: 00 0x0058: Capability 0x02: AGP 0x0050: Capability 0x01: Power Management 1:0:1: ATI Radeon 9600 XT Sec 0x0000: Vendor ID: 1002 Product ID: 4172 0x0004: Command: 0007 Status ID: 02b0 0x0008: Class: 03 Subclass: 80 Interface: 00 Revision: 00 0x000c: BIST: 00 Header Type: 00 Latency Timer: 20 Cache Line Size: 08 0x0010: BAR mem prefetchable 32bit addr: 0xb0000000/0x10000000 0x0014: BAR mem 32bit addr: 0xdfce0000/0x00010000 0x0018: BAR empty (00000000) 0x001c: BAR empty (00000000) 0x0020: BAR empty (00000000) 0x0024: BAR empty (00000000) 0x0028: Cardbus CIS: 00000000 0x002c: Subsystem Vendor ID: 174b Product ID: 0201 0x0030: Expansion ROM Base Address: 00000000 0x0038: 00000000 0x003c: Interrupt Pin: 00 Line: ff Min Gnt: 08 Max Lat: 00 0x0050: Capability 0x01: Power Management 2:3:0: CMD Technology SiI3512 SATA 0x0000: Vendor ID: 1095 Product ID: 3512 0x0004: Command: 0007 Status ID: 02b0 0x0008: Class: 01 Subclass: 04 Interface: 00 Revision: 01 0x000c: BIST: 00 Header Type: 00 Latency Timer: 20 Cache Line Size: 08 0x0010: BAR io addr: 0x0000dc00/0x0008 0x0014: BAR io addr: 0x0000d800/0x0004 0x0018: BAR io addr: 0x0000d400/0x0008 0x001c: BAR io addr: 0x0000d000/0x0004 0x0020: BAR io addr: 0x0000cc00/0x0010 0x0024: BAR mem 32bit addr: 0xdfeffe00/0x00000200 0x0028: Cardbus CIS: 00000000 0x002c: Subsystem Vendor ID: 1095 Product ID: 6512 0x0030: Expansion ROM Base Address: dfe00000 0x0038: 00000000 0x003c: Interrupt Pin: 01 Line: 03 Min Gnt: 00 Max Lat: 00 0x0060: Capability 0x01: Power Management 2:4:0: Intel PRO/1000GT (82541GI) 0x0000: Vendor ID: 8086 Product ID: 107c 0x0004: Command: 0017 Status ID: 0230 0x0008: Class: 02 Subclass: 00 Interface: 00 Revision: 05 0x000c: BIST: 00 Header Type: 00 Latency Timer: 20 Cache Line Size: 08 0x0010: BAR mem 32bit addr: 0xdfec0000/0x00020000 0x0014: BAR mem 32bit addr: 0xdfea0000/0x00020000 0x0018: BAR io addr: 0x0000c800/0x0040 0x001c: BAR empty (00000000) 0x0020: BAR empty (00000000) 0x0024: BAR empty (00000000) 0x0028: Cardbus CIS: 00000000 0x002c: Subsystem Vendor ID: 8086 Product ID: 1376 0x0030: Expansion ROM Base Address: dfe80000 0x0038: 00000000 0x003c: Interrupt Pin: 01 Line: 0c Min Gnt: ff Max Lat: 00 0x00dc: Capability 0x01: Power Management 0x00e4: Capability 0x07: PCI-X 2:5:0: VIA VT612x 0x0000: Vendor ID: 1106 Product ID: 3119 0x0004: Command: 0017 Status ID: 0230 0x0008: Class: 02 Subclass: 00 Interface: 00 Revision: 11 0x000c: BIST: 00 Header Type: 00 Latency Timer: 20 Cache Line Size: 08 0x0010: BAR io addr: 0x0000c400/0x0100 0x0014: BAR mem 32bit addr: 0xdfeffd00/0x00000100 0x0018: BAR empty (00000000) 0x001c: BAR empty (00000000) 0x0020: BAR empty (00000000) 0x0024: BAR empty (00000000) 0x0028: Cardbus CIS: 00000000 0x002c: Subsystem Vendor ID: 1106 Product ID: 0110 0x0030: Expansion ROM Base Address: 00000000 0x0038: 00000000 0x003c: Interrupt Pin: 01 Line: 0f Min Gnt: 03 Max Lat: 08 0x0050: Capability 0x01: Power Management ############# # sysctl hw # ############# hw.machine=i386 hw.model=Intel(R) Pentium(R) 4 CPU 2.40GHz ("GenuineIntel" 686-class) hw.ncpu=1 hw.byteorder=1234 hw.pagesize=4096 hw.disknames=wd0:69dbc259cb64de66,wd1:31884673ad7ec33e,fd0: hw.diskcount=3 hw.sensors.lm1.temp0=9.00 degC hw.sensors.lm1.temp1=43.50 degC hw.sensors.lm1.temp2=30.50 degC hw.sensors.lm1.volt0=1.50 VDC (VCore A) hw.sensors.lm1.volt1=1.46 VDC (VCore B) hw.sensors.lm1.volt2=3.15 VDC (+3.3V) hw.sensors.lm1.volt3=4.95 VDC (+5V) hw.sensors.lm1.volt4=11.73 VDC (+12V) hw.sensors.lm1.volt5=-11.46 VDC (-12V) hw.sensors.lm1.volt6=-4.90 VDC (-5V) hw.sensors.lm1.volt7=4.92 VDC (5VSB) hw.sensors.lm1.volt8=3.18 VDC (VBAT) hw.cpuspeed=2411 hw.setperf=100 hw.vendor=MICRO-STAR INC. hw.product=MS-6704 hw.version=100 hw.serialno=00000000 hw.uuid=Not Set hw.physmem=2146955264 hw.usermem=2146942976 hw.ncpufound=1 hw.allowpowerdown=1 ############## # usbdevs -v # ############## Controller /dev/usb0: addr 1: high speed, self powered, config 1, EHCI root hub(0x0000), Intel(0x8086), rev 1.00 port 1 powered port 2 powered port 3 powered port 4 powered port 5 powered port 6 powered Controller /dev/usb1: addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x8086), rev 1.00 port 1 powered port 2 powered Controller /dev/usb2: addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x8086), rev 1.00 port 1 powered port 2 powered Controller /dev/usb3: addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x8086), rev 1.00 port 1 powered port 2 powered Daniel -- LÉVAI Dániel PGP key ID = 0x83B63A8F Key fingerprint = DBEC C66B A47A DFA2 792D 650C C69B BE4C 83B6 3A8F
