Just tried it, but the result is identical. Is there a way to obtain more useful debugging output? I'm willing to put in testing effort here as I have two of these and strongly prefer to run OpenBSD on them.
> (subject line fixed) > > Could this be the mtrr thing? > > Rick, can you try the newer snapshot from 1 Aug? > > OpenBSD 5.2 (GENERIC.MP) #368: Wed Aug 1 10:04:49 MDT 2012 > > > On 2012/08/02 21:03, [email protected] wrote: >> >Synopsis: <Boot failure amd64 on 5.1-Release and 2012-07-30 snapshot> >> >Category: <kernel amd64)> >> >Environment: >> System : OpenBSD 5.2 >> Details : OpenBSD 5.2 (GENERIC.MP) #367: Mon Jul 30 16:29:56 MDT >> 2012 >> >> [email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.mp >> >> Architecture: OpenBSD.amd64 >> Machine : amd64 >> >Description: >> Both 5.1-Release and current snapshot of 2012-07-30 fail to boot >> on a Lenovo x3100 M4 2582E1G. Bios required setting LSI >> controller >> to AHCI instead of default RAID mode to make the disk visible to >> OpenBSD. The ramdisk kernel used for installing works fine, but >> on >> reboot both the mp and sp kernel fail identically. >> >How-To-Repeat: >> Just boot >> >Fix: >> Unkown >> >> dmesg: >> OpenBSD 5.2 (GENERIC.MP) #367: Mon Jul 30 16:29:56 MDT 2012 >> [email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP >> RTC BIOS diagnostic error 80<clock_battery> >> real mem = 2134487040 (2035MB) >> avail mem = 2055356416 (1960MB) >> mainbus0 at root >> bios0 at mainbus0: SMBIOS rev. 2.6 @ 0x7f702000 (43 entries) >> bios0: vendor IBM Corp. version "-[JQE128AUS-1.00]-" date 09-06-11 >> bios0: IBM IBM System X3100 M4 -[2582E1G]- >> acpi0 at bios0: rev 2 >> acpi0: sleep states S0 S1 S5 >> acpi0: tables DSDT FACP TCPA ERST HPET APIC MCFG SLIC SSDT SSDT >> acpi0: wakeup devices P0P1(S4) P0P2(S4) PEX1(S4) PEX2(S4) PEX3(S4) >> PEX4(S4) PEX >> 5(S4) EHI1(S3) EHI2(S3) PWRB(S3) >> acpitimer0 at acpi0: 3579545 Hz, 24 bits >> acpihpet0 at acpi0: 14318179 Hz >> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat >> cpu0 at mainbus0: apid 0 (boot processor) >> cpu0: Intel(R) Core(TM) i3-2100 CPU @ 3.10GHz, 3093.44 MHz >> cpu0: >> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,C >> FLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,EST, >> TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,XSAVE,AVX,NXE,LONG,LAHF >> cpu0: 256KB 64b/line 8-way L2 cache >> cpu0: apic clock running at 99MHz >> cpu1 at mainbus0: apid 2 (application processor) >> cpu1: Intel(R) Core(TM) i3-2100 CPU @ 3.10GHz, 3092.97 MHz >> cpu1: >> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,C >> FLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,EST, >> TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,XSAVE,AVX,NXE,LONG,LAHF >> cpu1: 256KB 64b/line 8-way L2 cache >> cpu2 at mainbus0: apid 1 (application processor) >> cpu2: Intel(R) Core(TM) i3-2100 CPU @ 3.10GHz, 3092.98 MHz >> cpu2: >> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,C >> FLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,EST, >> TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,XSAVE,AVX,NXE,LONG,LAHF >> cpu2: 256KB 64b/line 8-way L2 cache >> cpu3 at mainbus0: apid 3 (application processor) >> cpu3: Intel(R) Core(TM) i3-2100 CPU @ 3.10GHz, 3092.98 MHz >> cpu3: >> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,C >> FLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,EST, >> TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,XSAVE,AVX,NXE,LONG,LAHF >> cpu3: 256KB 64b/line 8-way L2 cache >> ioapic0 at mainbus0: apid 15 pa 0xfec00000, version 20, 24 pins >> ioapic0: misconfigured as apic 0, remapped to apid 15 >> acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63 >> acpiprt0 at acpi0: bus 0 (PCI0) >> acpiprt1 at acpi0: bus 26 (P0P1) >> acpiprt2 at acpi0: bus 31 (P0P2) >> acpiprt3 at acpi0: bus 1 (PEX1) >> acpiprt4 at acpi0: bus 6 (PEX2) >> acpiprt5 at acpi0: bus 11 (PEX3) >> acpiprt6 at acpi0: bus 16 (PEX4) >> acpiprt7 at acpi0: bus 21 (PEX5) >> acpicpu0 at acpi0: PSS >> acpicpu1 at acpi0: PSS >> acpicpu2 at acpi0: PSS >> acpicpu3 at acpi0: PSS >> acpibtn0 at acpi0: PWRB >> ipmi at mainbus0 not configured >> cpu0: Enhanced SpeedStep 3093 MHz: speeds: 3100, 3000, 2900, 2800, 2700, >> 2600, 2 >> 500, 2400, 2300, 2200, 2100, 2000, 1900, 1800, 1700, 1600 MHz >> pci0 at mainbus0 bus 0 >> extent_alloc_region: extent `pcimem' (0x0 - 0xfffffffff) >> extent_alloc_region: start 0x305081b00000, end 0x305081b000ff >> panic: extent_alloc_region: region lies outside extent >> Stopped at Debugger+0x5: leave >> Debugger() at Debugger+0x5 >> panic() at panic+0xe4 >> extent_alloc_region() at extent_alloc_region+0xb5 >> pci_reserve_resources() at pci_reserve_resources+0xfc >> pci_probe_device() at pci_probe_device+0x202 >> pci_enumerate_bus() at pci_enumerate_bus+0xe9 >> pciattach() at pciattach+0xda >> config_attach() at config_attach+0x1d4 >> mainbus_attach() at mainbus_attach+0x153 >> config_attach() at config_attach+0x1d4 >> end trace frame: 0xffffffff80e4ee90, count: 0 >> RUN AT LEAST 'trace' AND 'ps' AND INCLUDE OUTPUT WHEN REPORTING THIS >> PANIC! >> IF RUNNING SMP, USE 'mach ddbcpu <#>' AND 'trace' ON OTHER PROCESSORS, >> TOO. >> DO NOT EVEN BOTHER REPORTING THIS WITHOUT INCLUDING THAT INFORMATION! >> ddb{0}> Debugger() at Debugger+0x5 >> panic() at panic+0xe4 >> extent_alloc_region() at extent_alloc_region+0xb5 >> pci_reserve_resources() at pci_reserve_resources+0xfc >> pci_probe_device() at pci_probe_device+0x202 >> pci_enumerate_bus() at pci_enumerate_bus+0xe9 >> pciattach() at pciattach+0xda >> config_attach() at config_attach+0x1d4 >> mainbus_attach() at mainbus_attach+0x153 >> config_attach() at config_attach+0x1d4 >> cpu_configure() at cpu_configure+0x17 >> main() at main+0x3f5 >> end trace frame: 0x0, count: -12 >> ddb{0}> PID PPID PGRP UID S FLAGS WAIT >> COMMAND >> * 0 -1 0 0 7 0x200 swapper
