>Synopsis: no problem, just verifying how sendbug currently works.
>Category: documentation
>Environment:
System : OpenBSD 5.2
Details : OpenBSD 5.2-current (GENERIC) #2: Sat Nov 24 00:42:15 EST
2012
[email protected]:/usr/src/sys/arch/armish/compile/GENERIC
Architecture: OpenBSD.armish
Machine : armish
>Description:
query-pr.html is still being reached by users.
>How-To-Repeat:
man sendbug or google for "report OpenBSD bugs"
>Fix:
update query-pr.html, sendbug(8)
dmesg:
OpenBSD 5.2-current (GENERIC) #2: Sat Nov 24 00:42:15 EST 2012
[email protected]:/usr/src/sys/arch/armish/compile/GENERIC
real mem = 268435456 (256MB)
avail mem = 255467520 (243MB)
mainbus0 at root
cpu0 at mainbus0: i80219 600MHz step A-0 (XScale core)
cpu0: DC enabled IC enabled WB enabled LABT branch prediction enabled
cpu0: 32KB(32b/l,32way) I-cache, 32KB(32b/l,32way) wr-back-lock D-cache
iopxs0 at mainbus0: Thecus Nx100: i80321 I/O Processor
iopiic0 at iopxs0: I2C controller
iic0 at iopiic0
ricohrtc0 at iic0 addr 0x32: RICOH RS5C372[AB] Real-time Clock
pcaled0 at iic0 addr 0x60: PCA9532 LED controller
gpio0 at pcaled0: 16 pins
fintek0 at iic0 addr 0x2e: F75375 rev 1.5
spdmem0 at iic0 addr 0x52: 256MB DDR SDRAM non-parity PC3200CL3.0
pci0 at iopxs0
re0 at pci0 dev 1 function 0 "Realtek 8169" rev 0x10: RTL8169/8110SB (0x1000),
irq 27, address 00:14:fd:10:33:e6
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 3
re1 at pci0 dev 2 function 0 "Realtek 8169" rev 0x10: RTL8169/8110SB (0x1000),
irq 30, address 00:14:fd:10:33:e7
rgephy1 at re1 phy 7: RTL8169S/8110S PHY, rev. 3
pciide0 at pci0 dev 3 function 0 "CMD Technology SiI3512 SATA" rev 0x01: DMA
pciide0: using irq 29 for native-PCI interrupt
pciide0: port 0: device present, speed: 1.5Gb/s
wd0 at pciide0 channel 0 drive 0: <ST340014AS>
wd0: 16-sector PIO, LBA48, 38146MB, 78125000 sectors
wd0(pciide0:0:0): using BIOS timings, Ultra-DMA mode 6
uhci0 at pci0 dev 4 function 0 "VIA VT83C572 USB" rev 0x61: irq 27
uhci1 at pci0 dev 4 function 1 "VIA VT83C572 USB" rev 0x61: irq 27
ehci0 at pci0 dev 4 function 2 "VIA VT6202 USB" rev 0x63: irq 29
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "VIA EHCI root hub" rev 2.00/1.00 addr 1
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "VIA UHCI root hub" rev 1.00/1.00 addr 1
gpio at iopxs0 not configured
obio0 at mainbus0
com0 at obio0 addr 0xfe800000 intr 28: ns16550a, 16 byte fifo
com0: console
vscsi0 at root
scsibus0 at vscsi0: 256 targets
softraid0 at root
scsibus1 at softraid0: 256 targets
boot device: wd0
root on wd0a (9027842ea253e17d.a) swap on wd0b dump on wd0b
usbdevs:
Controller /dev/usb0:
addr 1: high speed, self powered, config 1, EHCI root hub(0x0000), VIA(0x1106),
rev 1.00
port 1 powered
port 2 powered
port 3 powered
port 4 powered
Controller /dev/usb1:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), VIA(0x1106),
rev 1.00
port 1 powered
port 2 powered
Controller /dev/usb2:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), VIA(0x1106),
rev 1.00
port 1 powered
port 2 powered
