On 11/11/12 16:13, Brynet wrote:
> It seems that macppc snapshots are broken on this model.
>
> The RAMDISK kernel never reaches userland, it gets as far as mounting
> root (root on rd0a..) and then.. stops.
>
> Unfortunately, I'm not sure when this started, I haven't powered on this
> system since I moved.. my bad. :-)
>
> USB device insertions/removals continue making noise, so, it's not
> completely dead.
>
> No problems with release, dmesg attached.
>
I'm having the same problem, I've narrowed the breakage point down
a bit...
This is the last kernel I have that DOES work:
OpenBSD 5.2-current (GENERIC) #3: Sat Aug 25 15:09:31 MDT 2012
[email protected]:/usr/src/sys/arch/macppc/compile/GENERIC
This is the first kernel I have that does NOT work:
OpenBSD 5.2-current (GENERIC) #4: Fri Aug 31 19:09:05 MDT 2012
[email protected]:/usr/src/sys/arch/macppc/compile/GENERIC
Unfortunately, I have no kernels between those two.
Last working dmesg:
OpenBSD 5.2-current (GENERIC) #3: Sat Aug 25 15:09:31 MDT 2012
[email protected]:/usr/src/sys/arch/macppc/compile/GENERIC
real mem = 536870912 (512MB)
avail mem = 508755968 (485MB)
mainbus0 at root: model PowerMac4,1
cpu0 at mainbus0: 750 (Revision 0x2214): 500 MHz: 256KB backside cache
mem0 at mainbus0
spdmem0 at mem0: 256MB SDRAM non-parity PC133CL3
spdmem1 at mem0: 256MB SDRAM non-parity PC133CL2
memc0 at mainbus0: uni-n
kiic0 at memc0 offset 0xf8001000
iic0 at kiic0
mpcpcibr0 at mainbus0 pci: uni-north, Revision 0xff
pci0 at mpcpcibr0 bus 0
pchb0 at pci0 dev 11 function 0 "Apple Pangea AGP" rev 0x00
vgafb0 at pci0 dev 16 function 0 "ATI Rage 128 Pro" rev 0x00, mmio
wsdisplay0 at vgafb0 mux 1: console (std, vt100 emulation)
mpcpcibr1 at mainbus0 pci: uni-north, Revision 0x0
pci1 at mpcpcibr1 bus 0
pchb1 at pci1 dev 11 function 0 "Apple Pangea" rev 0x00
macobio0 at pci1 dev 23 function 0 "Apple Pangea Macio" rev 0x00
openpic0 at macobio0 offset 0x40000: version 0x4614 feature 3f0302 LE
macgpio0 at macobio0 offset 0x50
macgpio1 at macgpio0 irq 47
pgs0 at macgpio0: irq 55
"escc-legacy" at macobio0 offset 0x12000 not configured
zsc0 at macobio0 offset 0x13000: irq 22,50
zstty0 at zsc0 channel 0
zstty1 at zsc0 channel 1
awacs0 at macobio0 offset 0x14000: irq 24,9,10 speaker
audio0 at awacs0
"timer" at macobio0 offset 0x15000 not configured
adb0 at macobio0 offset 0x16000 irq 25: via-pmu, 0 targets
apm0 at adb0: battery flags 0x9, 0% charged
kiic1 at macobio0 offset 0x18000
iic1 at kiic1
wdc0 at macobio0 offset 0x1f000 irq 19: DMA
wd0 at wdc0 channel 0 drive 0: <FUJITSU MHT2060AS>
wd0: 16-sector PIO, LBA, 57231MB, 117210240 sectors
atapiscsi0 at wdc0 channel 0 drive 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MATSHITA, CD-RW CW-7121, AH36> ATAPI 5/cdrom
removable
wd0(wdc0:0:0): using PIO mode 4, DMA mode 2
cd0(wdc0:0:1): using PIO mode 4, DMA mode 2
ohci0 at pci1 dev 24 function 0 "Apple Pangea USB" rev 0x00: irq 27, version 1.0
ohci1 at pci1 dev 25 function 0 "Apple Pangea USB" rev 0x00: irq 28, version 1.0
usb0 at ohci0: USB revision 1.0
uhub0 at usb0 "Apple OHCI root hub" rev 1.00/1.00 addr 1
usb1 at ohci1: USB revision 1.0
uhub1 at usb1 "Apple OHCI root hub" rev 1.00/1.00 addr 1
mpcpcibr2 at mainbus0 pci: uni-north, Revision 0x16
pci2 at mpcpcibr2 bus 0
pchb2 at pci2 dev 11 function 0 "Apple Pangea PCI" rev 0x00
"Apple Pangea FireWire" rev 0x00 at pci2 dev 14 function 0 not configured
gem0 at pci2 dev 15 function 0 "Apple Pangea GMAC" rev 0x00: irq 41, address
00:30:65:cb:38:04
bmtphy0 at gem0 phy 0: BCM5201 10/100 PHY, rev. 2
uhub2 at uhub0 port 1 "Mitsumi Electric Hub in Apple USB Keyboard" rev
1.10/2.11 addr 2
uhidev0 at uhub2 port 1 configuration 1 interface 0 "Mitsumi Electric Apple USB
Keyboard" rev 1.00/1.03 addr 3
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhidev1 at uhub1 port 1 configuration 1 interface 0 "Microsoft Microsoft Wheel
Mouse Optical\M-." rev 1.10/1.21 addr 2
uhidev1: iclass 3/1
ums0 at uhidev1: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
bootpath: /pci@f2000000/mac-io@17/ata-4@1f000/disk@0:/bsd20120827
root on wd0a (c75d83845024b2b0.a) swap on wd0b dump on wd0b
Nick.
