Greetings; and sorry to bother: I submitted this report on 07 April; and had some buggy responses - so I'd like a receipt confirmation of sorts, if possible.
I've received mixed/incomplete repsonses from the bugs majordomo response-bot (sent key seemed to be taken, second confirmation option was rejected). I'm using Win8 - where apps and plugins crash often. I haven't received any human repsonses as well (as to any more data/scripts to run, etc.). Which lead to a series of questions: Q1: Should there be a Bug Report Case Number (like I've seen on Fedora (I'm an ex-Linux user) Q2A: Though it's for a new platform - should I subscribe to a mailing list for feedback? Q2B: If so, which one? bugs or misc? Q3: Should I post the dmesg or any issues on Daemonforums? Q3: And finally - should I expect a "we've made some mods - now try this snapshot" msg? Thank you, Robert Gray ----- Original Message ----- From: Robert Gray Sent: 04/07/13 06:22 PM To: [email protected] Subject: Fw: Re: Unable to install OBSD on new Toshiba Laptop CHARACTER RULER 123456789A123456789B123456789C123456789D123456789E123456789F123456789G12 This is my first formal Bug Report Submittal, attempting to comply with OpenBSD Site Guidelines (changed from html to txt format and trying to stay within 72 characters). Feedback is appreciated. Greetings: This is a Crash Report when an OpenBSD 5.3-Current Snapshot dated 3/30/2013 was installed in a 16GB USB Flash Drive attached to a Toshiba Satellite L855 Laptop using the 3rd Generation Intel i7 Processor (Holiday/End-of-Year-Teaser/Loss-Leader/Geek-Candy). Original Config came with Win8 Pre-installed using UEFI. Internet Connections are via WiFi hotspots and Dedicated Wireless Modem/Router. UEFI - SecureBoot and FastBoot were disabled, and Custom/non-UEFI Booting Procedures were enabled. The Installation appeared to be successful with the possible minor exception of the following: 1) networking (vlan) appeared to have a ":1" default setting; and when selected, responded with an error ! message of its non-exisitence. 2) The etc.tgz set (IIRC), appeared to take much time - 5 or so minutes to install on the USB Flash Drive. When completed, the "KB" indicator was missing (compared to other Sets) and the elapsed time displayed was less than actual. Per Guidelines, the following are attached: 1) Crash, Trace, and PS Dialogues in the "Toshiba-Satellite...".txt file; and 2) Dmesg diaglogue in the "dmesg_installdisk.txt" file. Attempting the "dmesg" command after the crash from the ddb> prompt led to the dialogue repeating itself at the "cpu0" report, cycling itself by reporting the status of non-existent processors cpu1, cpu2, and so on until it freezes at cpu7. QUESTION: I'm not a Shell Programmer - a front end guy. After writing the dialogue on paper, jggimi at Daemonforums posted a method to "sh MAKEDEV" in order to mount a USB to the install disk shell session and retrieve the dmesg. My thanks to jggimi. Granted, the crashed environment isn't a stable platfor! m; but the IIRC, the Debubber (ddb>) did allow for shell commands that included the dmesg command. I caught myself making a few glitches while "Scribing" from Paper to Text File. Can Shell commands "MAKEDEV", "mount", and cp/mv/printfile options be made available to the ddb command list, so we can mount an USB and output the TRACE and PS output to it - similar to the way dmesg can with its ">" output option? I figure it'll save some time on a collective man-hour basis - improve the clerical accuracy, depth/detai/quality of bug reports, and reduce annoyances to Kernel Debuggers. Thank you. ----- Original Message ----- From: Robert Gray Sent: 03/27/13 03:22 AM To: Ted Unangst, Kenneth R Westerback Subject: Re: Unable to install OBSD on new Toshiba Laptop Roger that. Thanks, Gentlemen. So it actually comes down to writing things down line by line - ^_^ I usually download snapshots. I'm in the middle of changing ISPs; and should be able to give you the data by the Weekend. Best regards, ----- Original Message ----- From: Ted Unangst Sent: 03/22/13! 04:49 PM To: Robert Gray Subject: Re: Unable to install OBSD on new Toshiba Laptop On Fri, Mar 22, 2013 at 18:09, Robert Gray wrote: > Greetings, > > I've tried to install OpenBSD on an USB Stick (LiveUSB from an install CD) > on my Toshiba Satellite L855-S5383 (Intel i7 Processor, Win8 > Pre-installed) Laptop purchased this January. > > The initial Boot Process runs into a Kernel Panic, stating that I should > run "trace" and "ps", submit the Crash Report, and boots me out to the > ddb> prompt. > > I'm presuming that this is due to the fact that this is a new machine > (holiday teaser deal). Since I'm not an OS Programmer, how can I extract > the output and submit it for the Kernel Hackers? run trace, then write down the output (and as much of the info before the panic as possible), and include it in an email to bugs. you also need to include a lot more detail, such as what version you're installing and how you booted it. Robert Gray +1 310.769.1202 US Pacific Time UTC-8/! -7 Daylight Savings Robert Gray +1 310.769.1202 US Pacific Time UTC-8/-7 Daylight Savings Robert Gray +1 310.769.1202 US Pacific Time UTC-8/-7 Daylight Savings OpenBSD 5.3-current (RAMDISK_CD) #81: Sat Mar 30 09:06:34 MDT 2013 [email protected]:/usr/src/sys/arch/i386/compile/RAMDISK_CD cpu0: Intel(R) Core(TM) i7-3630QM CPU @ 2.40GHz ("GenuineIntel" 686-class) 2.40 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS real mem = 3113328640 (2969MB) avail mem = 3055218688 (2913MB) mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 01/14/13, BIOS32 rev. 0 @ 0xef725, SMBIOS rev. 2.7 @ 0xe71d0 (29 entries) bios0: vendor Insyde Corp. version "6.60" date 01/14/2013 bios0: TOSHIBA Satellite L855 acpi0 at bios0: rev 2 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP UEFI ASF! HPET APIC MCFG SLIC WDAT SSDT BOOT ASPT DBGP SSDT FPDT MSDM SSDT SSDT acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: apic clock running at 99MHz cpu at mainbus0: not configured cpu at mainbus0: not configured cpu at mainbus0: not configured cpu at mainbus0: not configured cpu at mainbus0: not configured cpu at mainbus0: not configured cpu at mainbus0: not configured ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 20, 24 pins acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus -1 (P0P1) acpiprt2 at acpi0: bus 1 (RP01) acpiprt3 at acpi0: bus 2 (RP02) acpiprt4 at acpi0: bus -1 (RP03) acpiprt5 at acpi0: bus -1 (RP04) acpiprt6 at acpi0: bus -1 (RP05) acpiprt7 at acpi0: bus -1 (RP06) acpiprt8 at acpi0: bus -1 (RP07) acpiprt9 at acpi0: bus -1 (RP08) acpiprt10 at acpi0: bus -1 (PEG0) acpiprt11 at acpi0: bus -1 (PEG1) acpiprt12 at acpi0: bus -1 (PEG2) acpiprt13 at acpi0: bus -1 (PEG3) bios0: ROM list: 0xc0000/0xf000 0xcf000/0x1000 pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at pci0 dev 0 function 0 "Intel Core 3G Host" rev 0x09 vga1 at pci0 dev 2 function 0 "Intel HD Graphics 4000" rev 0x09 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) "Intel 7 Series xHCI" rev 0x04 at pci0 dev 20 function 0 not configured "Intel 7 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured ehci0 at pci0 dev 26 function 0 "Intel 7 Series USB" rev 0x04: apic 0 int 16 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 "Intel 7 Series HD Audio" rev 0x04 at pci0 dev 27 function 0 not configured ppb0 at pci0 dev 28 function 0 "Intel 7 Series PCIE" rev 0xc4: apic 0 int 17 pci1 at ppb0 bus 1 "Attansic Technology L1F" rev 0x10 at pci1 dev 0 function 0 not configured ppb1 at pci0 dev 28 function 1 "Intel 7 Series PCIE" rev 0xc4: apic 0 int 16 pci2 at ppb1 bus 2 vendor "Realtek", unknown product 0x8723 (class network subclass miscellaneous, rev 0x00) at pci2 dev 0 function 0 not configured ehci1 at pci0 dev 29 function 0 "Intel 7 Series USB" rev 0x04: apic 0 int 23 usb1 at ehci1: USB revision 2.0 uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 pcib0 at pci0 dev 31 function 0 "Intel HM76 LPC" rev 0x04 ahci0 at pci0 dev 31 function 2 "Intel 7 Series AHCI" rev 0x04: msi, AHCI 1.3 scsibus0 at ahci0: 32 targets sd0 at scsibus0 targ 0 lun 0: <ATA, TOSHIBA MK6476GS, GS00> SCSI3 0/direct fixed naa.500003948d309089 sd0: 610480MB, 512 bytes/sector, 1250263728 sectors cd0 at scsibus0 targ 5 lun 0: <TSSTcorp, CDDVDW SN-208AB, TO04> ATAPI 5/cdrom removable "Intel 7 Series SMBus" rev 0x04 at pci0 dev 31 function 3 not configured isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 uhub2 at uhub0 port 1 "vendor 0x8087 product 0x0024" rev 2.00/0.00 addr 2 "Generic USB2.0-CRW" rev 2.00/39.60 addr 3 at uhub2 port 1 not configured "Importek TOSHIBA Web Camera - HD" rev 2.00/12.12 addr 4 at uhub2 port 3 not configured uhub3 at uhub1 port 1 "vendor 0x8087 product 0x0024" rev 2.00/0.00 addr 2 uhidev0 at uhub3 port 1 configuration 1 interface 0 "MOSART Semi. 2.4G Wireless Mouse" rev 1.10/16.03 addr 3 uhidev0: iclass 3/1, 5 report ids uhid at uhidev0 reportid 3 not configured uhid at uhidev0 reportid 5 not configured umass0 at uhub3 port 3 configuration 1 interface 0 "CENTON DS Designer" rev 2.00/1.03 addr 4 umass0: using SCSI over Bulk-Only scsibus1 at umass0: 2 targets, initiator 0 sd1 at scsibus1 targ 1 lun 0: <CENTON, DS Designer, 8.07> SCSI2 0/direct removable sd1: 4012MB, 512 bytes/sector, 8216576 sectors softraid0 at root scsibus2 at softraid0: 256 targets root on rd0a swap on rd0b dump on rd0b 05 April 2013 Subject Platform: Toshiba Satellite L855-S5383 Sections 1. CRASH DIALOGUE 2. TRACE 3. PS 1. CRASH_DIALOGUE acpi prt11 at acpi0: bus -1 (PEG1) acpi prt12 at acpi0: bus -1 (PEG2) acpi prt13 at acpi0: bus -1 (PEG3) acpicpu0 at acpi0 Store to default type! 8 01a9 Called: \_PR_.CPU0._PDC arg0: 0xd3f6d044 cnt: 0l stk: 00 buffer: 0c{01,00,00,00,01,00,00,00,36,03,00,00} panic aml_die_aml_store: 2621 Stopped at Debugger+0x4: popl %ebp 2. TRACE Debugger(d0962106, d0c3b754, d0a3e09a, d0c3b754, d3f678c4) at Debugger+0x4 panic(d0a3e09a, d0a3da70, a3d, 0, 0) at panic+0x5d _aml_die(d0a3de70, a3d, d0a3e50a, 8, d0a688f4) at _aml_die+0135 aml_store(d3f6d804, d3f60304, 0, 0, d3f6bd04) at aml_store+0xbe aml_parse(d3f6d804, 54, d0ac3e4ac, 14, d0c3b8c7) at aml_parse+0xf5b aml_eval(0, d3fb19c4, 74, 1, d0c3ba2c) at aml_eval+0x21c aml_evealnode(d3ee9200, d3fb1644, 1, d0c3ba2c, d0c3b9f8) at aml_evalnode+0x68 acpicpu_set_pde(d3eec300, d3f1d7c4, 0, 0, d0a3bab4) at acpicpu_set_pde+0x7a acpicpu_attach(d3ee9200, d3eec300, d0c3bb84, d044133b, 0) at acpicpu_attach+0x98 config_attach(d3ee9200, d0a46660, d0c36684, d0897d00, d0c36650) at config_attach+0x1bb acpi_add_device(d3f1d7c4, d3ee9200, 0, 1, 0) at acpi_add_device+0x96 aml_walknodes(d3f1d7c4, 0, d0897850, d3ee9200, 0) at aml_walknodes+0x64 aml_walknodes(d3eeb444, 0, d0897850, d3ee9200, d0934202) at aml_walknodes+0x47 aml_walknodes(d0b73820, 0, d0897850, d3ee9200, 0) at aml_walknodes+0x47 acpi_attach(d3eeb040, d3ee9200, d0c3bd74, d044133b, 0) at acpi_attach+0x5bc config_attach(d3ee040, d0a465c0, d0c36bd74, d07dede0, 1d) at config_attach+01bb bios_attach(d3eeb000, d3eeb040, d0c3be54, d044133b, 0) at bios_attach+0x6a9 config_attach(d3eeb000, d0a45620, d0c3be54, d0604720, 0) at 0x1bb mainbus_attach(0, d3eeb000, 0, d0a43040, 0) at mainbus_attach+0x4e config_attach(0, d0a43040, 0, 0, d0ab6be0) at config_attach+0x1bb config_rootfound(d09610ee, 0, 0, d04311741, 0) at config_rootfound+0x46 cpu_configure(d0b72940, 1, 1000, cff3f000, 1) at cpu_configure+0x29 main(d02004f6, d02004fe, 0, 0, 0) at main+0x3fb 3. PS PID PPID PGRP UID S FLAGS WAIT 0 -1 0 0 7 0x200 (blank)
