Hi
Im running OpenBSD 5.3 generic on Soekris 6501, with a TL-WDN4800
(AR9380) NIC. When running "ifconfig athn0 up" the kernel panics and
goes to ddb everytime I try the command.
Other interface commands like "mediaopts" and "nwid" works.
I also noted from dmesg that the device is recognized as a:
"AR9380 rev 3 (1T2R)"
I'm no expert in this hardware but I'm pretty sure it's a 3T3R device.
ifconfig athn0 up
kernel: integer divide fault trap, code=0
Stopped at ar9003_set_delta_slope+0x33: idivl %ecx,%eax
ddb{0}>
"show panic" output:
the kernel did not panic
"trace" output:
ar9003_set_delta_slope() at ar9003_set_delta_slope+0x33
athn_hw_reset() at athn_hw_reset+0x20e
athn_init() at athn_init+0x11b
athn_ioctl() at athn_ioctl+0x1e6
in6_ifinit() at in6_ifinit+0xc1
in6_update_ifa() at in6_update_ifa+0x1dd
in6_ifattach_linklocal() at in6_ifattach_linklocal+0x113
in6_ifattach() at in6_ifattach+0x104
in6_if_up() at in6_if_up+0x15
if_up() at if_up+0x78
ifioctl() at ifioctl+0xba1
sys_ioctl() at sys_ioctl+0x150
syscall() at syscall+0x249
--- syscall (number 54) ---
end of kernel
end trace frame: 0x7f7fffff2830, count: -13
acpi_pdirpa+0x408c22:
"ps" output:
PID PPID PGRP UID S FLAGS WAIT COMMAND
*16602 24966 16602 0 7 0 ifconfig
24966 1 24966 0 3 0x88 pause ksh
4608 1 4608 0 3 0x80 select cron
11632 1 11632 77 3 0x80 poll dhcpd
15367 1 15367 0 3 0x80 select sshd
18693 21342 21342 70 3 0x80 select named
21342 1 21342 0 3 0x80 netio named
5381 3094 3094 74 3 0x80 bpf pflogd
3094 1 3094 0 3 0x80 netio pflogd
25465 21302 21302 73 3 0x80 poll syslogd
21302 1 21302 0 3 0x80 netio syslogd
16 0 0 0 3 0x100200 aiodoned aiodoned
15 0 0 0 3 0x100200 syncer update
14 0 0 0 3 0x100200 cleaner cleaner
13 0 0 0 3 0x100200 reaper reaper
12 0 0 0 3 0x100200 pgdaemon pagedaemon
11 0 0 0 3 0x100200 bored srdis
10 0 0 0 3 0x100200 bored crypto
9 0 0 0 3 0x100200 pftm pfpurge
8 0 0 0 3 0x100200 mmctsk sdmmc1
7 0 0 0 3 0x100200 mmctsk sdmmc0
6 0 0 0 3 0x100200 usbtsk usbtask
5 0 0 0 3 0x100200 usbatsk usbatsk
4 0 0 0 7 0x40100200 idle1
3 0 0 0 3 0x100200 bored syswq
2 0 0 0 3 0x40100200 idle0
1 0 1 0 3 0x80 wait init
0 -1 0 0 3 0x200 scheduler swapper
"show registers" output:
ds 0
es 0x40f1 mp_pdirpa+0x200a
fs 0
gs 0
rdi 0xffff800000165000
rsi 0xffff80002134482c
rbp 0xffff800021344850
rbx 0xffff800000165000
rdx 0
rcx 0
rax 0x64000000
r8 0
r9 0x1
r10 0x3
r11 0xffffffff80458760 x86_bus_space_mem_write_4
r12 0xffff800021344828
r13 0xffff80002134482c
r14 0x1
r15 0xffff800000165556
rip 0xffffffff801e7293 ar9003_set_delta_slope+0x33
cs 0x8
rflags 0x10282 acpi_pdirpa+0xbd7a
rsp 0xffff800021344820
ss 0x10
ar9003_set_delta_slope+0x33: idivl %ecx,%eax
"dmesg" output:
OpenBSD 5.3 (GENERIC.MP) #62: Tue Mar 12 18:21:20 MDT 2013
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 2146304000 (2046MB)
avail mem = 2066735104 (1970MB)
mainbus0 at root
bios0 at mainbus0
acpi at bios0 not configured
mpbios0 at bios0: Intel MP Specification 1.4
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Genuine Intel(R) CPU @ 1.60GHz, 1600.22 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBEF
cpu0: 512KB 64b/line 8-way L2 cache
cpu0: apic clock running at 100MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Genuine Intel(R) CPU @ 1.60GHz, 1599.99 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBEF
cpu1: 512KB 64b/line 8-way L2 cache
mpbios0: bus 0 is type PCI
mpbios0: bus 64 is type ISA
ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 20, 24 pins
cpu0: unknown Enhanced SpeedStep CPU, msr 0x0614101b0600101d
cpu0: using only highest, current and lowest power states
cpu0: Enhanced SpeedStep 1600 MHz: speeds: 1600, 1600, 600 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel E600 Host" rev 0x05
pchb1 at pci0 dev 1 function 0 "Intel E600 Config" rev 0x00
ppb0 at pci0 dev 23 function 0 "Intel E600 PCIE" rev 0x00
pci1 at ppb0 bus 1
ppb1 at pci1 dev 0 function 0 "Intel EG20T PCIE" rev 0x01
pci2 at ppb1 bus 2
"Intel EG20T Packet Hub" rev 0x01 at pci2 dev 0 function 0 not
configured
"Intel EG20T Ethernet" rev 0x01 at pci2 dev 0 function 1 not
configured
"Intel EG20T GPIO" rev 0x00 at pci2 dev 0 function 2 not configured
ohci0 at pci2 dev 2 function 0 "Intel EG20T USB" rev 0x01: apic 0 int
19, version 1.0, legacy support
ohci1 at pci2 dev 2 function 1 "Intel EG20T USB" rev 0x01: apic 0 int
19, version 1.0, legacy support
ohci2 at pci2 dev 2 function 2 "Intel EG20T USB" rev 0x01: apic 0 int
19, version 1.0, legacy support
ehci0 at pci2 dev 2 function 3 "Intel EG20T USB" rev 0x01: apic 0 int
19
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
"Intel EG20T USB Client" rev 0x01 at pci2 dev 2 function 4 not
configured
sdhc0 at pci2 dev 4 function 0 "Intel EG20T SDIO" rev 0x01: apic 0 int
18
sdmmc0 at sdhc0
sdhc1 at pci2 dev 4 function 1 "Intel EG20T SDIO" rev 0x01: apic 0 int
18
sdmmc1 at sdhc1
ahci0 at pci2 dev 6 function 0 "Intel EG20T AHCI" rev 0x01: msi, AHCI
1.1
scsibus0 at ahci0: 32 targets
ahci0: stopping the port, softreset slot 31 was still active.
sd0 at scsibus0 targ 0 lun 0: <ATA, WDC WD2500BPVT-2, 01.0> SCSI3
0/direct fixed naa.50014ee6ad72b751
sd0: 238475MB, 512 bytes/sector, 488397168 sectors
sd1 at scsibus0 targ 1 lun 0: <ATA, WDC WD2500BPVT-2, 01.0> SCSI3
0/direct fixed naa.50014ee6ad72b45f
sd1: 238475MB, 512 bytes/sector, 488397168 sectors
ohci3 at pci2 dev 8 function 0 "Intel EG20T USB" rev 0x01: apic 0 int
16, version 1.0, legacy support
ohci4 at pci2 dev 8 function 1 "Intel EG20T USB" rev 0x01: apic 0 int
16, version 1.0, legacy support
ohci5 at pci2 dev 8 function 2 "Intel EG20T USB" rev 0x01: apic 0 int
16, version 1.0, legacy support
ehci1 at pci2 dev 8 function 3 "Intel EG20T USB" rev 0x01: apic 0 int
16
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
"Intel EG20T DMA" rev 0x00 at pci2 dev 10 function 0 not configured
puc0 at pci2 dev 10 function 1 "Intel EG20T Serial" rev 0x00: ports: 1
com
com2 at puc0 port 0 apic 0 int 19: ti16750, 64 byte fifo
puc1 at pci2 dev 10 function 2 "Intel EG20T Serial" rev 0x00: ports: 1
com
com3 at puc1 port 0 apic 0 int 19: ti16750, 64 byte fifo
puc2 at pci2 dev 10 function 3 "Intel EG20T Serial" rev 0x00: ports: 1
com
com4 at puc2 port 0 apic 0 int 19: ti16750, 64 byte fifo
puc3 at pci2 dev 10 function 4 "Intel EG20T Serial" rev 0x00: ports: 1
com
com5 at puc3 port 0 apic 0 int 19: ti16750, 64 byte fifo
"Intel EG20T DMA" rev 0x00 at pci2 dev 12 function 0 not configured
"Intel EG20T SPI" rev 0x00 at pci2 dev 12 function 1 not configured
"Intel EG20T I2C" rev 0x00 at pci2 dev 12 function 2 not configured
"Intel EG20T CAN" rev 0x00 at pci2 dev 12 function 3 not configured
"Intel EG20T 1588" rev 0x01 at pci2 dev 12 function 4 not configured
usb2 at ohci0: USB revision 1.0
uhub2 at usb2 "Intel OHCI root hub" rev 1.00/1.00 addr 1
usb3 at ohci1: USB revision 1.0
uhub3 at usb3 "Intel OHCI root hub" rev 1.00/1.00 addr 1
usb4 at ohci2: USB revision 1.0
uhub4 at usb4 "Intel OHCI root hub" rev 1.00/1.00 addr 1
usb5 at ohci3: USB revision 1.0
uhub5 at usb5 "Intel OHCI root hub" rev 1.00/1.00 addr 1
usb6 at ohci4: USB revision 1.0
uhub6 at usb6 "Intel OHCI root hub" rev 1.00/1.00 addr 1
usb7 at ohci5: USB revision 1.0
uhub7 at usb7 "Intel OHCI root hub" rev 1.00/1.00 addr 1
ppb2 at pci0 dev 24 function 0 "Intel E600 PCIE" rev 0x00
pci3 at ppb2 bus 3
ppb3 at pci3 dev 0 function 0 "IDT 89HPES4T4" rev 0x0e
pci4 at ppb3 bus 4
ppb4 at pci4 dev 2 function 0 "IDT 89HPES4T4" rev 0x0e
pci5 at ppb4 bus 5
em0 at pci5 dev 0 function 0 "Intel PRO/1000 MT (82574L)" rev 0x00:
msi, address 00:00:24:cf:29:40
ppb5 at pci4 dev 3 function 0 "IDT 89HPES4T4" rev 0x0e
pci6 at ppb5 bus 6
em1 at pci6 dev 0 function 0 "Intel PRO/1000 MT (82574L)" rev 0x00:
msi, address 00:00:24:cf:29:41
ppb6 at pci4 dev 4 function 0 "IDT 89HPES4T4" rev 0x0e
pci7 at ppb6 bus 7
ppb7 at pci0 dev 25 function 0 "Intel E600 PCIE" rev 0x00
pci8 at ppb7 bus 8
ppb8 at pci8 dev 0 function 0 "IDT 89HPES4T4" rev 0x0e
pci9 at ppb8 bus 9
ppb9 at pci9 dev 2 function 0 "IDT 89HPES4T4" rev 0x0e
pci10 at ppb9 bus 10
em2 at pci10 dev 0 function 0 "Intel PRO/1000 MT (82574L)" rev 0x00:
msi, address 00:00:24:cf:29:42
ppb10 at pci9 dev 3 function 0 "IDT 89HPES4T4" rev 0x0e
pci11 at ppb10 bus 11
em3 at pci11 dev 0 function 0 "Intel PRO/1000 MT (82574L)" rev 0x00:
msi, address 00:00:24:cf:29:43
ppb11 at pci9 dev 4 function 0 "IDT 89HPES4T4" rev 0x0e
pci12 at ppb11 bus 12
ppb12 at pci0 dev 26 function 0 "Intel E600 PCIE" rev 0x00
pci13 at ppb12 bus 13
athn0 at pci13 dev 0 function 0 "Atheros AR9300" rev 0x01: apic 0 int
19
athn0: AR9380 rev 3 (1T2R), ROM rev 0, address 00:00:ef:be:ad:de
tcpcib0 at pci0 dev 31 function 0 "Intel E600 LPC" rev 0x00: 14318179
Hz timer, watchdog
isa0 at tcpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ti16750, 64 byte fifo
com0: console
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
mtrr: Pentium Pro MTRR support
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
softraid0: sd2 was not shutdown properly
sd2 at scsibus2 targ 1 lun 0: <OPENBSD, SR RAID 1, 005> SCSI2 0/direct
fixed
sd2: 238339MB, 512 bytes/sector, 488118449 sectors
root on sd2a (f8ac080ff91bb58a.a) swap on sd2b dump on sd2b
WARNING: / was not properly unmounted
