Current from tonight explodes with "Bad system call" yet the snapshot
from May 13th works just fine?
OpenBSD 5.2-current (GENERIC.MP) #0: Sun May 19 03:59:29 CEST 2013
[email protected]:/usr/src/sys/arch/sparc64/compile/GENERIC.MP
real mem = 2147483648 (2048MB)
avail mem = 2101133312 (2003MB)
mainbus0 at root: Sun Ultra 60 UPA/PCI (2 X UltraSPARC-II 450MHz)
cpu0 at mainbus0: SUNW,UltraSPARC-II (rev 10.0) @ 450.042 MHz
cpu0: physical 16K instruction (32 b/l), 16K data (32 b/l), 4096K external (64
b/l)
cpu1 at mainbus0: SUNW,UltraSPARC-II (rev 10.0) @ 450.042 MHz
cpu1: physical 16K instruction (32 b/l), 16K data (32 b/l), 4096K external (64
b/l)
psycho0 at mainbus0 addr 0xfffb4000: SUNW,psycho, impl 0, version 4, ign 7c0
psycho0: bus range 0-0, PCI bus 0
psycho0: dvma map fe000000-ffffffff, STC0 enabled
pci0 at psycho0
ebus0 at pci0 dev 1 function 0 "Sun PCIO EBus2" rev 0x01
auxio0 at ebus0 addr 726000-726003, 728000-728003, 72a000-72a003,
72c000-72c003, 72f000-72f003
power0 at ebus0 addr 724000-724003
"SUNW,pll" at ebus0 addr 504000-504002 not configured
uperf0 at ebus0 addr 500000-500007: model SUNW,sc-qp (0/1) ports 9
sab0 at ebus0 addr 400000-40007f ivec 0x2b: rev 3.2
sabtty0 at sab0 port 0: console
sabtty1 at sab0 port 1
comkbd0 at ebus0 addr 3083f8-3083ff ivec 0x29: no keyboard
comms0 at ebus0 addr 3062f8-3062ff ivec 0x2a
wsmouse0 at comms0 mux 0
lpt0 at ebus0 addr 3043bc-3043cb, 300398-300399, 700000-70000f ivec 0x22: polled
"fdthree" at ebus0 addr 3023f0-3023f7, 706000-70600f, 720000-720003 ivec 0x27
not configured
clock1 at ebus0 addr 0-1fff: mk48t59
"flashprom" at ebus0 addr 0-fffff not configured
audioce0 at ebus0 addr 200000-2000ff, 702000-70200f, 704000-70400f,
722000-722003 ivec 0x23 ivec 0x24: nvaddrs 0
audio0 at audioce0
hme0 at pci0 dev 1 function 1 "Sun HME" rev 0x01: ivec 0x7e1, address
08:00:20:c9:43:cd
luphy0 at hme0 phy 1: LU6612 10/100 PHY, rev. 1
siop0 at pci0 dev 3 function 0 "Symbios Logic 53c875" rev 0x14: ivec 0x7e0,
using 4K of on-board RAM
scsibus0 at siop0: 16 targets, initiator 7
sd0 at scsibus0 targ 0 lun 0: <IBM-ESXS, MAW3073NC FN, C206> SCSI2 0/direct
fixed serial.IBM-ESXSMAW3073NC_FNDAR9P710AKTU
sd0: 70006MB, 512 bytes/sector, 143374000 sectors
cd0 at scsibus0 targ 6 lun 0: <TOSHIBA, XM6201TASUN32XCD, 1103> SCSI2 5/cdrom
removable
siop1 at pci0 dev 3 function 1 "Symbios Logic 53c875" rev 0x14: ivec 0x7e6,
using 4K of on-board RAM
scsibus1 at siop1: 16 targets, initiator 7
ohci0 at pci0 dev 5 function 0 "NEC USB" rev 0x43: ivec 0x7dc, version 1.0
ohci1 at pci0 dev 5 function 1 "NEC USB" rev 0x43: ivec 0x7dd, version 1.0
ehci0 at pci0 dev 5 function 2 "NEC USB" rev 0x04: ivec 0x7de
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "NEC EHCI root hub" rev 2.00/1.00 addr 1
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 "NEC OHCI root hub" rev 1.00/1.00 addr 1
usb2 at ohci1: USB revision 1.0
uhub2 at usb2 "NEC OHCI root hub" rev 1.00/1.00 addr 1
psycho1 at mainbus0 addr 0xfffc6000: SUNW,psycho, impl 0, version 4, ign 7c0
psycho1: bus range 128-128, PCI bus 128
psycho1: dvma map fe000000-ffffffff, STC0 enabled, STC1 enabled
pci1 at psycho1
"counter-timer" at mainbus0 addr 0xfff9fc00 not configured
creator0 at mainbus0 addr 0xfebc0000: Elite3D, model SUNW,540-3623, dac 0
wsdisplay0 at creator0 mux 1
wsdisplay0: screen 0 added (std, sun emulation)
siop0: target 0 now using tagged 16 bit 20.0 MHz 16 REQ/ACK offset xfers
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
bootpath: /pci@1f,4000/scsi@3,0/disk@0,0
root on sd0a (8b380dd29ae2bfd1.a) swap on sd0b dump on sd0b
creator0: firmware rev 1.3.11
Automatic boot in progress: starting file system checks.
/dev/sd0a (8b380dd29ae2bfd1.a): file system is clean; not checking
/dev/sd0g (8b380dd29ae2bfd1.g): file system is clean; not checking
/dev/sd0e (8b380dd29ae2bfd1.e): file system is clean; not checking
/dev/sd0f (8b380dd29ae2bfd1.f): file system is clean; not checking
/dev/sd0d (8b380dd29ae2bfd1.d): file system is clean; not checking
Bad system call (core dumped)
Bad system call (core dumped)
setting tty flags
pf enabled
kern.nosuidcoredump: 1 -> 2
machdep.allowaperture: 0 -> 1
kern.bufcachepercent: 20 -> 90
kern.pool_debug: 1 -> 0
kern.splassert: 1 -> 2
starting network
can't open and lock /var/db/dhclient.leases.hme0: No such file or directory
/etc/rc[380]: cd: /var/run - No such file or directory
/etc/rc[381]: cd: /var/authpf - No such file or directory
/etc/rc[384]: cannot create /var/run/dmesg.boot: No such file or directory
/etc/rc[386]: ssh-keygen: not found
starting early daemons:/etc/rc.d/syslogd: /etc/rc.d/rc.subr[200]: basename: not
found
/etc/rc.d/syslogd: /etc/rc.d/rc.subr[218]: printf: not found
/etc/rc.d/syslogd[24]: id: not found
(failed)/etc/rc.d/pflogd: /etc/rc.d/rc.subr[200]: basename: not found
/etc/rc.d/pflogd: /etc/rc.d/rc.subr[218]: printf: not found
/etc/rc.d/pflogd[24]: id: not found
(failed)/etc/rc.d/ntpd: /etc/rc.d/rc.subr[200]: basename: not found
/etc/rc.d/ntpd: /etc/rc.d/rc.subr[218]: printf: not found
/etc/rc.d/ntpd[12]: id: not found
(failed).
starting RPC daemons:.
Bad system call (core dumped)
checking quotas: done.
/etc/rc[421]: quotaon: not found
/etc/rc[423]: kvm_mkdb: not found
/etc/rc[424]: dev_mkdb: not found
clearing /tmp
/etc/rc[441]: find: not found
starting pre-securelevel daemons:.
setting kernel security level: kern.securelevel: 0 -> 1
/etc/rc[461]: mktemp: not found
creating runtime link editor directory cache.
ldconfig: /usr/lib: No such file or directory
ldconfig: /var/run/ld.so.hints.AuQheZPg8a: No such file or directory
preserving editor files.
/etc/rc[481]: /usr/libexec/vi.recover: not found
starting network daemons:/etc/rc.d/sshd: /etc/rc.d/rc.subr[200]: basename: not
found
/etc/rc.d/sshd: /etc/rc.d/rc.subr[218]: printf: not found
/etc/rc.d/sshd[13]: id: not found
(failed)/etc/rc.d/smtpd: /etc/rc.d/rc.subr[200]: basename: not found
/etc/rc.d/smtpd: /etc/rc.d/rc.subr[218]: printf: not found
/etc/rc.d/smtpd[13]: id: not found
(failed)/etc/rc.d/sndiod: /etc/rc.d/rc.subr[200]: basename: not found
/etc/rc.d/sndiod: /etc/rc.d/rc.subr[218]: printf: not found
/etc/rc.d/sndiod[11]: id: not found
(failed).
starting local daemons:/etc/rc.d/cron: /etc/rc.d/rc.subr[200]: basename: not
found
/etc/rc.d/cron: /etc/rc.d/rc.subr[218]: printf: not found
/etc/rc.d/cron[9]: id: not found
(failed)/etc/rc.d/xdm: /etc/rc.d/rc.subr[200]: basename: not found
/etc/rc.d/xdm: /etc/rc.d/rc.subr[218]: printf: not found
/etc/rc.d/xdm[9]: id: not found
(failed).
Sun May 19 02:13:08 GMT 2013
May 19 02:13:09 init: can't exec getty '/usr/libexec/getty' for May 19 02:13:39
init: can't exec
