I recently updated a Netra T1 to the latest (Aug 1st) snapshot (from
an April 2013 snapshot) and since then it reliably panics each time it
is halted or rebooted.
The machine has been running snapshots, irregularly updated via bsd.rd
for several years without any previous problems. So long as it is not
halted or rebooted it continues to run fine, and in every other
respect is still working perfectly.
I can take the system offline at night and have full remote LOM /
console so if there is anything I can do to provide more info please
let me know.
Apologies in advance if google screws up the text below.
lom>poweron
lom>
LOM event: power on
Netra t1 (UltraSPARC-IIi 440MHz), No Keyboard
OpenBoot 3.10.27 ME, 1024 MB memory installed, Serial #16365908.
Ethernet address 8:0:20:f9:b9:54, Host ID: 80f9b954.
Boot device: disk File and args:
OpenBSD IEEE 1275 Bootblock 1.3
..>> OpenBSD BOOT 1.4
Trying bsd...
Booting /pci@1f,0/pci@1,1/scsi@2/disk@0,0:a/bsd
6708416@0x1000000+832@0x1665cc0+174680@0x1800000+4019624@0x182aa58
symbols @ 0xfea5c340 115+408504+257582 start=0x1000000
[ using 667040 bytes of bsd ELF symbol table ]
console is /pci@1f,0/pci@1,1/ebus@1/su@14,3803f8
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2013 OpenBSD. All rights reserved. http://www.OpenBSD.org
OpenBSD 5.4 (GENERIC) #31: Thu Aug 1 11:36:33 MDT 2013
[email protected]:/usr/src/sys/arch/sparc64/compile/GENERIC
real mem = 1073741824 (1024MB)
avail mem = 1043472384 (995MB)
mainbus0 at root: Netra t1 (UltraSPARC-IIi 440MHz)
cpu0 at mainbus0: SUNW,UltraSPARC-IIi (rev 9.1) @ 440.026 MHz
cpu0: physical 16K instruction (32 b/l), 16K data (32 b/l), 2048K
external (64 b/l)
psycho0 at mainbus0 addr 0xfffc0000: SUNW,sabre, impl 0, version 0, ign 7c0
psycho0: bus range 0-3, PCI bus 0
psycho0: dvma map c0000000-dfffffff
pci0 at psycho0
ppb0 at pci0 dev 1 function 1 "Sun Simba" rev 0x13
pci1 at ppb0 bus 1
ebus0 at pci1 dev 1 function 0 "Sun PCIO EBus2" rev 0x01
auxio0 at ebus0 addr 726000-726003, 728000-728003, 72a000-72a003,
72c000-72c003, 72f000-72f003
power0 at ebus0 addr 724000-724003 ivec 0x25
"SUNW,pll" at ebus0 addr 504000-504002 not configured
com0 at ebus0 addr 3803f8-3803ff ivec 0x1c: ns16550a, 16 byte fifo
com0: console
com1 at ebus0 addr 3602f8-3602ff ivec 0x14: ns16550a, 16 byte fifo
lpt0 at ebus0 addr 340278-340287, 30015c-30015d, 700000-70000f ivec 0x22: polled
clock1 at ebus0 addr 0-1fff: mk48t59
"flashprom" at ebus0 addr 0-fffff not configured
"watchdog" at ebus0 addr 200000-20003f ivec 0x4 not configured
"display7seg" at ebus0 addr 200040-200040 not configured
beeper0 at ebus0 addr 722000-722003
"flashprom" at ebus0 addr 400000-5fffff not configured
"flashprom" at ebus0 addr 800000-9fffff not configured
pcfiic0 at ebus0 addr 600000-600003 ivec 0x28
iic0 at pcfiic0
pcfadc0 at iic0 addr 0x4f
"i2cpcf,8574a" at iic0 addr 0x38 not configured
"i2cpcf,8574a" at iic0 addr 0x39 not configured
pcfiic1 at ebus0 addr 100000-100003 ivec 0x1b
iic1 at pcfiic1
lom0 at ebus0 addr 400000-400063: not responding
hme0 at pci1 dev 1 function 1 "Sun HME" rev 0x01: ivec 0x7e1, address
08:00:20:f9:b9:54
luphy0 at hme0 phy 0: LU6612 10/100 PHY, rev. 1
siop0 at pci1 dev 2 function 0 "Symbios Logic 53c875" rev 0x03: ivec
0x7e0, using 4K of on-board RAM
scsibus0 at siop0: 16 targets, initiator 7
sd0 at scsibus0 targ 0 lun 0: <FUJITSU, MAN3184M SUN18G, 1804> SCSI2
0/direct fixed serial.FUJITSU_MAN3184M_SUN18G_02Z70875_
sd0: 17274MB, 512 bytes/sector, 35378533 sectors
sd1 at scsibus0 targ 1 lun 0: <FUJITSU, MAN3184M SUN18G, 1804> SCSI2
0/direct fixed serial.FUJITSU_MAN3184M_SUN18G_02Z71101_
sd1: 17274MB, 512 bytes/sector, 35378533 sectors
hme1 at pci1 dev 3 function 1 "Sun HME" rev 0x01: ivec 0x7da, address
08:00:20:f9:b9:55
luphy1 at hme1 phy 0: LU6612 10/100 PHY, rev. 1
ppb1 at pci0 dev 1 function 0 "Sun Simba" rev 0x13
pci2 at ppb1 bus 2
ppb2 at pci2 dev 1 function 0 "DEC 21150" rev 0x06
pci3 at ppb2 bus 3
pciide0 at pci3 dev 14 function 0 "CMD Technology PCI0646" rev 0x03:
DMA, channel 0 configured to native-PCI, channel 1 configured to
native-PCI
pciide0: using ivec 0x7c2 for native-PCI interrupt
pciide0: channel 0 disabled (no drives)
pciide0: channel 1 disabled (no drives)
re0 at pci3 dev 15 function 0 "Realtek 8169" rev 0x10: RTL8110S
(0x0400), ivec 0x7c3, address 00:0e:2e:b9:09:db
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 0
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
siop0: target 0 now using tagged 16 bit 20.0 MHz 16 REQ/ACK offset xfers
siop0: target 1 now using tagged 16 bit 20.0 MHz 16 REQ/ACK offset xfers
bootpath: /pci@1f,0/pci@1,1/scsi@2,0/disk@0,0
root on sd0a swap on sd0b dump on sd0b
Automatic boot in progress: starting file system checks.
/dev/rsd0a: file system is clean; not checking
/dev/rsd0k: file system is clean; not checking
/dev/rsd1a: file system is clean; not checking
/dev/rsd0d: file system is clean; not checking
/dev/rsd1d: file system is clean; not checking
/dev/rsd0f: file system is clean; not checking
/dev/rsd0g: file system is clean; not checking
/dev/rsd0h: file system is clean; not checking
/dev/rsd1e: file system is clean; not checking
/dev/rsd0j: file system is clean; not checking
/dev/rsd0i: file system is clean; not checking
/dev/rsd1f: file system is clean; not checking
/dev/rsd0e: file system is clean; not checking
setting tty flags
pf enabled
kern.pool_debug: 0 -> 0
net.inet.ip.forwarding: 0 -> 1
starting network
add net default: gateway 0.0.0.1
starting early daemons: syslogd pflogd named ntpd.
starting RPC daemons:.
savecore: no core dump
checking quotas: done.
clearing /tmp
starting pre-securelevel daemons:.
setting kernel security level: kern.securelevel: 0 -> 1
creating runtime link editor directory cache.
preserving editor files.
starting network daemons: sshd dhcpd sendmail.
starting local daemons:.
starting local daemons: cron.
Thu Aug 8 19:03:39 BST 2013
OpenBSD/sparc64 (gw3.company.co.uk) (console)
login: /etc/rc.shutdown in progress...
/etc/rc.shutdown complete.
syncing disks... done
panic: kernel data fault: pc=1455804 addr=0
kdb breakpoint at 147d4a0
Stopped at Debugger+0x4: nop
RUN AT LEAST 'trace' AND 'ps' AND INCLUDE OUTPUT WHEN REPORTING THIS PANIC!
DO NOT EVEN BOTHER REPORTING THIS WITHOUT INCLUDING THAT INFORMATION!
ddb> ps
PID PPID PGRP UID S FLAGS WAIT COMMAND
*24272 1 24272 0 7 0 reboot
11 0 0 0 3 0x100200 aiodoned aiodoned
10 0 0 0 3 0x100200 syncer update
9 0 0 0 3 0x100200 cleaner cleaner
8 0 0 0 3 0x100200 reaper reaper
7 0 0 0 3 0x100200 pgdaemon pagedaemon
6 0 0 0 3 0x100200 bored crypto
5 0 0 0 3 0x100200 pftm pfpurge
4 0 0 0 2 0x100200 syswq
3 0 0 0 3 0x40100200 idle0
2 0 0 0 3 0x100200 kmalloc kmthread
1 0 1 0 3 0x80 wait init
0 -1 0 0 3 0x200 scheduler swapper
ddb> trace
data_access_fault(40016d0ee30, 30, 1455804, 0, 0, 80080d) at data_access_fault+
0x294
trapbase_sun4v(40000f99700, 5, 180e000, 0, 0, 0) at trapbase_sun4v+0x8790
lom1_queue_cmd(40000f99000, 40016d0f0d8, 0, 0, 0, 0) at lom1_queue_cmd+0x8
lom1_write(40000f99000, 31, 40016d0f0d8, 200000, 80000000, 1) at lom1_write+0x5
0
lom_activate(40000f99000, 5, 5fb1e6bd1, 6, 40001086400, 0) at lom_activate+0x10
config_suspend(40000f99000, 5, 155a518, 4000a078210, 1, 1800) at config_suspend
+0x1c
config_activate_children(40000f9a700, 5, 3, 40016d0f9e0, 0, 0) at config_activa
te_children+0x54
config_activate_children(40000f9a600, 5, 40001213000, 40001213000, fffb9ff8, 80
) at config_activate_children+0x54
pciactivate(40000f9a600, 5, 40016d0fb58, 0, 0, 9c40) at pciactivate+0x64
config_suspend(40000f9a600, 5, 180e000, 0, 0, 0) at config_suspend+0x1c
config_activate_children(40001086200, 5, 0, 0, 0, 0) at config_activate_childre
n+0x54
ppbactivate(40001086200, 5, 0, 200000, 80000000, 1) at ppbactivate+0x160
config_suspend(40001086200, 5, 5fb1e6bd1, 6, 40001086400, 0) at config_suspend+
0x1c
config_activate_children(40000f9a500, 5, 155a518, 4000a078210, 1, 1800) at conf
ig_activate_children+0x54
pciactivate(40000f9a500, 5, 3, 40016d0f9e0, 0, 0) at pciactivate+0x64
config_suspend(40000f9a500, 5, 40001213000, 40001213000, fffb9ff8, 80) at confi
g_suspend+0x1c
config_activate_children(40000f9a100, 5, 40016d0fb58, 0, 0, 9c40) at config_act
ivate_children+0x54
config_activate_children(40001082000, 5, 180e000, 0, 0, 0) at config_activate_c
hildren+0x54
boot(0, 0, 0, 0, 0, 0) at boot+0x58
sys_reboot(0, 40016d0fdc0, 40016d0fe00, 40016d0fd38, 40009fb6000, 14b) at sys_r
eboot+0x24
syscall(40016d0fed0, 437, 1017e8, 1017ec, ffffff9b, 800005) at syscall+0x254
softtrap(0, ffffffffffffffff, 0, 90, 336688, 0) at softtrap+0x19c
ddb> show registers
tstate 0x80000602
pc 0x147d4a4 Debugger+0x4
npc 0x147d4a8 Debugger+0x8
ipl 0xf
y 0
g0 0
g1 0x180e000 time_uptime+0x29c
g2 0x1
g3 0x1
g4 0
g5 0x1
g6 0x300000000000000
g7 0xe0018000
o0 0x1
o1 0x40016d0ed48
o2 0x180e000 time_uptime+0x29c
o3 0x40016d0ed48
o4 0
o5 0
o6 0x40016d0e3f1
o7 0x11b478c panic+0x8c
l0 0x182d620 __bss_start+0x2bc8
l1 0
l2 0x400010d1280
l3 0x40016d0f9fc
l4 0x40016d0f9d8
l5 0x400011ee000
l6 0x400011e5000
l7 0
i0 0
i1 0
i2 0
i3 0
i4 0
i5 0
i6 0
i7 0
f0 0
f2 0
f4 0
f6 0
f8 0
f10 0
f12 0
f14 0
f16 0
f18 0
f20 0
f22 0
f24 0
f26 0
f28 0
f30 0
f32 0
f34 0
f36 0
f38 0
f40 0
f42 0
f44 0
f46 0
f48 0
f50 0
f52 0
f54 0
f56 0
f58 0
f60 0
f62 0
fsr 0
gsr 0
Debugger+0x4: nop
ddb> boot reboot
#.
lom>
lom>poweroff
lom>
LOM event: power off
lom>poweron
lom>
LOM event: power on
Netra t1 (UltraSPARC-IIi 440MHz), No Keyboard
OpenBoot 3.10.27 ME, 1024 MB memory installed, Serial #16365908.
Ethernet address 8:0:20:f9:b9:54, Host ID: 80f9b954.
Boot device: disk File and args:
OpenBSD IEEE 1275 Bootblock 1.3
..>> OpenBSD BOOT 1.4
Trying bsd...
Booting /pci@1f,0/pci@1,1/scsi@2/disk@0,0:a/bsd
6708416@0x1000000+832@0x1665cc0+174680@0x1800000+4019624@0x182aa58
symbols @ 0xfea5c340 115+408504+257582 start=0x1000000
[ using 667040 bytes of bsd ELF symbol table ]
console is /pci@1f,0/pci@1,1/ebus@1/su@14,3803f8
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2013 OpenBSD. All rights reserved. http://www.OpenBSD.org
OpenBSD 5.4 (GENERIC) #31: Thu Aug 1 11:36:33 MDT 2013
[email protected]:/usr/src/sys/arch/sparc64/compile/GENERIC
real mem = 1073741824 (1024MB)
avail mem = 1043472384 (995MB)
mainbus0 at root: Netra t1 (UltraSPARC-IIi 440MHz)
cpu0 at mainbus0: SUNW,UltraSPARC-IIi (rev 9.1) @ 440.026 MHz
cpu0: physical 16K instruction (32 b/l), 16K data (32 b/l), 2048K
external (64 b/l)
psycho0 at mainbus0 addr 0xfffc0000: SUNW,sabre, impl 0, version 0, ign 7c0
psycho0: bus range 0-3, PCI bus 0
psycho0: dvma map c0000000-dfffffff
pci0 at psycho0
ppb0 at pci0 dev 1 function 1 "Sun Simba" rev 0x13
pci1 at ppb0 bus 1
ebus0 at pci1 dev 1 function 0 "Sun PCIO EBus2" rev 0x01
auxio0 at ebus0 addr 726000-726003, 728000-728003, 72a000-72a003,
72c000-72c003, 72f000-72f003
power0 at ebus0 addr 724000-724003 ivec 0x25
"SUNW,pll" at ebus0 addr 504000-504002 not configured
com0 at ebus0 addr 3803f8-3803ff ivec 0x1c: ns16550a, 16 byte fifo
com0: console
com1 at ebus0 addr 3602f8-3602ff ivec 0x14: ns16550a, 16 byte fifo
lpt0 at ebus0 addr 340278-340287, 30015c-30015d, 700000-70000f ivec 0x22: polled
clock1 at ebus0 addr 0-1fff: mk48t59
"flashprom" at ebus0 addr 0-fffff not configured
"watchdog" at ebus0 addr 200000-20003f ivec 0x4 not configured
"display7seg" at ebus0 addr 200040-200040 not configured
beeper0 at ebus0 addr 722000-722003
"flashprom" at ebus0 addr 400000-5fffff not configured
"flashprom" at ebus0 addr 800000-9fffff not configured
pcfiic0 at ebus0 addr 600000-600003 ivec 0x28
iic0 at pcfiic0
pcfadc0 at iic0 addr 0x4f
"i2cpcf,8574a" at iic0 addr 0x38 not configured
"i2cpcf,8574a" at iic0 addr 0x39 not configured
pcfiic1 at ebus0 addr 100000-100003 ivec 0x1b
iic1 at pcfiic1
lom0 at ebus0 addr 400000-400063: not responding
hme0 at pci1 dev 1 function 1 "Sun HME" rev 0x01: ivec 0x7e1, address
08:00:20:f9:b9:54
luphy0 at hme0 phy 0: LU6612 10/100 PHY, rev. 1
siop0 at pci1 dev 2 function 0 "Symbios Logic 53c875" rev 0x03: ivec
0x7e0, using 4K of on-board RAM
scsibus0 at siop0: 16 targets, initiator 7
sd0 at scsibus0 targ 0 lun 0: <FUJITSU, MAN3184M SUN18G, 1804> SCSI2
0/direct fixed serial.FUJITSU_MAN3184M_SUN18G_02Z70875_
sd0: 17274MB, 512 bytes/sector, 35378533 sectors
sd1 at scsibus0 targ 1 lun 0: <FUJITSU, MAN3184M SUN18G, 1804> SCSI2
0/direct fixed serial.FUJITSU_MAN3184M_SUN18G_02Z71101_
sd1: 17274MB, 512 bytes/sector, 35378533 sectors
hme1 at pci1 dev 3 function 1 "Sun HME" rev 0x01: ivec 0x7da, address
08:00:20:f9:b9:55
luphy1 at hme1 phy 0: LU6612 10/100 PHY, rev. 1
ppb1 at pci0 dev 1 function 0 "Sun Simba" rev 0x13
pci2 at ppb1 bus 2
ppb2 at pci2 dev 1 function 0 "DEC 21150" rev 0x06
pci3 at ppb2 bus 3
pciide0 at pci3 dev 14 function 0 "CMD Technology PCI0646" rev 0x03:
DMA, channel 0 configured to native-PCI, channel 1 configured to
native-PCI
pciide0: using ivec 0x7c2 for native-PCI interrupt
pciide0: channel 0 disabled (no drives)
pciide0: channel 1 disabled (no drives)
re0 at pci3 dev 15 function 0 "Realtek 8169" rev 0x10: RTL8110S
(0x0400), ivec 0x7c3, address 00:0e:2e:b9:09:db
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 0
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
siop0: target 0 now using tagged 16 bit 20.0 MHz 16 REQ/ACK offset xfers
siop0: target 1 now using tagged 16 bit 20.0 MHz 16 REQ/ACK offset xfers
bootpath: /pci@1f,0/pci@1,1/scsi@2,0/disk@0,0
root on sd0a swap on sd0b dump on sd0b
Automatic boot in progress: starting file system checks.
/dev/rsd0a: file system is clean; not checking
/dev/rsd0k: file system is clean; not checking
/dev/rsd1a: file system is clean; not checking
/dev/rsd0d: file system is clean; not checking
/dev/rsd1d: file system is clean; not checking
/dev/rsd0f: file system is clean; not checking
/dev/rsd0g: file system is clean; not checking
/dev/rsd0h: file system is clean; not checking
/dev/rsd1e: file system is clean; not checking
/dev/rsd0j: file system is clean; not checking
/dev/rsd0i: file system is clean; not checking
/dev/rsd1f: file system is clean; not checking
/dev/rsd0e: file system is clean; not checking
setting tty flags
pf enabled
kern.pool_debug: 0 -> 0
net.inet.ip.forwarding: 0 -> 1
ddb.panic: 1 -> 1
starting network
add net default: gateway 0.0.0.1
starting early daemons: syslogd pflogd named ntpd.
starting RPC daemons:.
savecore: no core dump
checking quotas: done.
clearing /tmp
starting pre-securelevel daemons:.
setting kernel security level: kern.securelevel: 0 -> 1
creating runtime link editor directory cache.
preserving editor files.
starting network daemons: sshd dhcpd sendmail.
starting local daemons:.
starting local daemons: cron.
Thu Aug 8 19:06:45 BST 2013
OpenBSD/sparc64 (gw3.company.co.uk) (console)
login:
