On Thu, Mar 20, 2014 at 9:11 PM, <[email protected]> wrote: >>Synopsis: regression in cwm grouping after recent commit >>Category: system >>Environment: > System : OpenBSD 5.5 > Details : OpenBSD 5.5-current (GENERIC.MP) #5: Tue Mar 18 > 16:19:15 MDT 2014 > > [email protected]:/usr/src/sys/arch/i386/compile/GENERIC.MP > > Architecture: OpenBSD.i386 > Machine : i386 >>Description: > Up until recently, in non-sticky mode, cwm would show > non-group-assigned windows on all groups. i.e. If I set > xterms to always be assigned to group 2, they only show up > on group 2, but if I have mplayer not assigned to a group, > it will show up on all groups. > > A commit on or after the 7th of February changed this so > that new windows which are not assigned to a group are not > visible upon switching to any other group. I must left > click on the root window and specifically unhide them, > whereupon they disappear again on switching to another > group.
Yeah, there is a regression with nogroup - I'm aware of this, but haven't yet found time to fix it. Thanks for reporting! >>How-To-Repeat: > Use cwm dated 2014-02-07 or later and spawn a window which > is not assigned to a group, then switch groups. > > i.e. create a .cwmrc which contains > autogroup 2 "xterm,XTerm" > 1) spawn an xterm > 2) switch to another group # xterm disappears here > 3) switch back to group 2 # xterm reappears > # the above steps are normal and expected behavior > 4) spawn anything other than an xterm > 5) switch to another group > # window disappears here, when it should be omnipresent > # the only way to get it back is to manually unhide it > >>Fix: > Reverting cwm to the version on 2014-02-06 fixes the > regression, but is obviously not a proper solution. > > > dmesg: > OpenBSD 5.5-current (GENERIC.MP) #5: Tue Mar 18 16:19:15 MDT 2014 > [email protected]:/usr/src/sys/arch/i386/compile/GENERIC.MP > cpu0: Genuine Intel(R) CPU T2300 @ 1.66GHz ("GenuineIntel" 686-class) 1.67 GHz > cpu0: > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,SSE3,MWAIT,VMX,EST,TM2,xTPR,PDCM,PERF > real mem = 2682613760 (2558MB) > avail mem = 2626359296 (2504MB) > mainbus0 at root > bios0 at mainbus0: AT/286+ BIOS, date 04/01/10, BIOS32 rev. 0 @ 0xfd6b0, > SMBIOS rev. 2.4 @ 0xe0010 (68 entries) > bios0: vendor LENOVO version "79ETE6WW (2.26 )" date 04/01/2010 > bios0: LENOVO 2623D9U > acpi0 at bios0: rev 2 > acpi0: sleep states S0 S3 S4 S5 > acpi0: tables DSDT FACP SSDT ECDT TCPA APIC MCFG HPET BOOT SSDT SSDT SSDT SSDT > acpi0: wakeup devices LID_(S3) SLPB(S3) LURT(S3) DURT(S3) EXP0(S4) EXP1(S4) > EXP2(S4) EXP3(S4) PCI1(S4) USB0(S3) USB1(S3) USB2(S3) USB7(S3) HDEF(S4) > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpiec0 at acpi0 > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges > cpu0: apic clock running at 166MHz > cpu0: mwait min=64, max=64, C-substates=0.2.2.2.2, IBE > cpu1 at mainbus0: apid 1 (application processor) > cpu1: Genuine Intel(R) CPU T2300 @ 1.66GHz ("GenuineIntel" 686-class) 1.67 GHz > cpu1: > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,SSE3,MWAIT,VMX,EST,TM2,xTPR,PDCM,PERF > ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins > ioapic0: misconfigured as apic 2, remapped to apid 1 > acpimcfg0 at acpi0 addr 0xf0000000, bus 0-63 > acpihpet0 at acpi0: 14318179 Hz > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus 1 (AGP_) > acpiprt2 at acpi0: bus 2 (EXP0) > acpiprt3 at acpi0: bus 3 (EXP1) > acpiprt4 at acpi0: bus 4 (EXP2) > acpiprt5 at acpi0: bus 12 (EXP3) > acpiprt6 at acpi0: bus 21 (PCI1) > acpicpu0 at acpi0: C3, C2, C1, PSS > acpicpu1 at acpi0: C3, C2, C1, PSS > acpipwrres0 at acpi0: PUBS, resource for USB0, USB2, USB7 > acpitz0 at acpi0: critical temperature is 127 degC > acpitz1 at acpi0: critical temperature is 99 degC > acpibtn0 at acpi0: LID_ > acpibtn1 at acpi0: SLPB > acpibat0 at acpi0: BAT0 model "92P1139" serial 659 type LION oem "Panasonic" > acpibat1 at acpi0: BAT1 not present > acpiac0 at acpi0: AC unit online > acpithinkpad0 at acpi0 > acpidock0 at acpi0: GDCK docked (15) > bios0: ROM list: 0xc0000/0xfe00 0xd0000/0x1000 0xd1000/0x1000 0xdc000/0x4000! > 0xe0000/0x10000! > cpu0: Enhanced SpeedStep 1663 MHz: speeds: 1667, 1333, 1000 MHz > pci0 at mainbus0 bus 0: configuration mode 1 (bios) > pchb0 at pci0 dev 0 function 0 "Intel 82945GM Host" rev 0x03 > ppb0 at pci0 dev 1 function 0 "Intel 82945GM PCIE" rev 0x03: apic 1 int 16 > pci1 at ppb0 bus 1 > radeondrm0 at pci1 dev 0 function 0 "ATI Radeon Mobility X1300 M52-64" rev > 0x00 > drm0 at radeondrm0 > radeondrm0: apic 1 int 16 > azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: msi > azalia0: codecs: Analog Devices AD1981HD, Conexant/0x2bfa, using Analog > Devices AD1981HD > audio0 at azalia0 > ppb1 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: apic 1 int 20 > pci2 at ppb1 bus 2 > em0 at pci2 dev 0 function 0 "Intel 82573L" rev 0x00: msi, address > 00:16:41:52:7e:81 > ppb2 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: apic 1 int 21 > pci3 at ppb2 bus 3 > wpi0 at pci3 dev 0 function 0 "Intel PRO/Wireless 3945ABG" rev 0x02: msi, > MoW1, address 00:13:02:20:41:18 > ppb3 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x02: apic 1 int 22 > pci4 at ppb3 bus 4 > ppb4 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x02: apic 1 int 23 > pci5 at ppb4 bus 12 > uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 1 int 16 > uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 1 int 17 > uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 1 int 18 > uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 1 int 19 > ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 1 int 19 > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > ppb5 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2 > pci6 at ppb5 bus 21 > cbb0 at pci6 dev 0 function 0 "TI PCI1510 CardBus" rev 0x00: apic 1 int 16 > cardslot0 at cbb0 slot 0 flags 0 > cardbus0 at cardslot0: bus 22 device 0 cacheline 0x8, lattimer 0xb0 > pcmcia0 at cardslot0 > ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02: PM disabled > pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x02: DMA, channel > 0 configured to compatibility, channel 1 configured to compatibility > atapiscsi0 at pciide0 channel 0 drive 0 > scsibus0 at atapiscsi0: 2 targets > cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, DVDRAM GSA-U10N, 1.05> ATAPI 5/cdrom > removable > cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 > pciide0: channel 1 ignored (disabled) > ahci0 at pci0 dev 31 function 2 "Intel 82801GBM AHCI" rev 0x02: msi, AHCI 1.1 > scsibus1 at ahci0: 32 targets > sd0 at scsibus1 targ 0 lun 0: <ATA, INTEL SSDSC2CW24, 400i> SCSI3 0/direct > fixed naa.5001517bb2a98d08 > sd0: 228936MB, 512 bytes/sector, 468862128 sectors, thin > ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic 1 int > 23 > iic0 at ichiic0 > usb1 at uhci0: USB revision 1.0 > uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb2 at uhci1: USB revision 1.0 > uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb3 at uhci2: USB revision 1.0 > uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb4 at uhci3: USB revision 1.0 > uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > isa0 at ichpcib0 > isadma0 at isa0 > com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo > pckbc0 at isa0 port 0x60/5 > pckbd0 at pckbc0 (kbd slot) > pckbc0: using irq 1 for kbd slot > wskbd0 at pckbd0: console keyboard > pms0 at pckbc0 (aux slot) > pckbc0: using irq 12 for aux slot > wsmouse0 at pms0 mux 0 > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > aps0 at isa0 port 0x1600/31 > npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 > uhub5 at uhub0 port 6 "IBM product 0x4485" rev 2.00/0.01 addr 2 > umass0 at uhub5 port 1 configuration 1 interface 0 "Seagate Backup+ Desk" rev > 2.10/1.00 addr 3 > umass0: using SCSI over Bulk-Only > scsibus2 at umass0: 2 targets, initiator 0 > sd1 at scsibus2 targ 1 lun 0: <Seagate, Backup+ Desk, 050B> SCSI4 0/direct > fixed > sd1: 3815447MB, 4096 bytes/sector, 976754645 sectors > uhidev0 at uhub5 port 3 configuration 1 interface 0 "Logitech USB-PS/2 > Optical Mouse" rev 2.00/20.00 addr 4 > uhidev0: iclass 3/1 > ums0 at uhidev0: 3 buttons, Z dir > wsmouse1 at ums0 mux 0 > uhidev1 at uhub5 port 4 configuration 1 interface 0 "Gravis GamePad Pro USB" > rev 1.00/2.00 addr 5 > uhidev1: iclass 3/0 > uhid0 at uhidev1: input=4, output=0, feature=0 > vscsi0 at root > scsibus3 at vscsi0: 256 targets > softraid0 at root > scsibus4 at softraid0: 256 targets > softraid0: sd2 was not shutdown properly > sd2 at scsibus4 targ 1 lun 0: <OPENBSD, SR CRYPTO, 005> SCSI2 0/direct fixed > sd2: 200595MB, 512 bytes/sector, 410819160 sectors > root on sd2a (bfe3b486511fab55.a) swap on sd2b dump on sd2b > WARNING: / was not properly unmounted > drm: initializing kernel modesetting (RV515 0x1002:0x7149 0x17AA:0x2005). > radeondrm0: VRAM: 128M 0x0000000000000000 - 0x0000000007FFFFFF (64M used) > radeondrm0: GTT: 512M 0x0000000008000000 - 0x0000000027FFFFFF > drm: PCIE GART of 512M enabled (table at 0x0000000000040000). > radeondrm0: 1024x768 > wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using wskbd0 > wsdisplay0: screen 1-5 added (std, vt100 emulation) > > usbdevs: > Controller /dev/usb0: > addr 1: high speed, self powered, config 1, EHCI root hub(0x0000), > Intel(0x8086), rev 1.00 > port 1 powered > port 2 powered > port 3 powered > port 4 powered > port 5 powered > port 6 addr 2: high speed, self powered, config 1, product 0x4485(0x4485), > IBM(0x04b3), rev 0.01 > port 1 addr 3: high speed, self powered, config 1, Backup+ Desk(0xa0a4), > Seagate(0x0bc2), rev 1.00, iSerialNumber NA5KB06L > port 2 powered > port 3 addr 4: low speed, power 98 mA, config 1, USB-PS/2 Optical > Mouse(0xc03d), Logitech(0x046d), rev 20.00 > port 4 addr 5: low speed, power 100 mA, config 1, GamePad Pro USB(0x4001), > Gravis(0x0428), rev 2.00 > port 7 powered > port 8 powered > Controller /dev/usb1: > addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), > Intel(0x8086), rev 1.00 > port 1 powered > port 2 powered > Controller /dev/usb2: > addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), > Intel(0x8086), rev 1.00 > port 1 powered > port 2 powered > Controller /dev/usb3: > addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), > Intel(0x8086), rev 1.00 > port 1 powered > port 2 powered > Controller /dev/usb4: > addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), > Intel(0x8086), rev 1.00 > port 1 powered > port 2 powered
