Hi,
I've been having an issue with Igmpproxy after upgrading from
5.4-snapshot to 5.5-CURRENT.
Before the upgrade Igmpproxy used to work fine with my current config
file and services such as upnp which need Igmpproxy to work were
performing fine.
Currently running tcpdump -eni vlan(x) host 239.255.255.250 shows
packets being sent to the multicast address on the specified vlan so
there is actually multicast traffic appearing in the network.
# tcpdump -eni vlan192 host 239.255.255.250
tcpdump: listening on vlan192, link-type EN10MB
tcpdump: WARNING: compensating for unaligned libpcap packets
23:36:08.652520 00:25:90:e3:5d:a8 01:00:5e:7f:ff:fa 0800 215:
192.168.1.80.57831 > 239.255.255.250.1900: udp 173 [ttl 1]
23:36:08.652525 00:25:90:e3:5d:a8 01:00:5e:7f:ff:fa 0800 215:
192.168.1.80.57831 > 239.255.255.250.1900: udp 173 [ttl 1]
23:36:09.141167 00:25:90:e3:5d:a8 01:00:5e:7f:ff:fa 0800 215:
192.168.1.80.5282 > 239.255.255.250.1900: udp 173
23:36:09.141289 00:25:90:e3:5d:a8 01:00:5e:7f:ff:fa 0800 215:
192.168.1.80.5282 > 239.255.255.250.1900: udp 173
The exact issue is that Igmpproxy will not start. Using the rc script
the output is:
# /etc/rc.d/igmpproxy restart
igmpproxy(failed)
/var/log/messages output:
Apr 30 23:23:04 Gamma-Ray igmpproxy: Note: adding VIF, Ix 0 Fl 0x0 IP
0x010210ac vlan10, Threshold: 1, Ratelimit: 0
Apr 30 23:23:04 Gamma-Ray igmpproxy: Note: adding VIF, Ix 1 Fl 0x0 IP
0x0101a8c0 vlan192, Threshold: 1, Ratelimit: 0
Apr 30 23:23:04 Gamma-Ray igmpproxy: Note: adding VIF, Ix 2 Fl 0x0 IP
0x0100a8c0 vlan2, Threshold: 1, Ratelimit: 0
Apr 30 23:23:04 Gamma-Ray igmpproxy: Note: adding VIF, Ix 3 Fl 0x0 IP
0x0114a8c0 vlan20, Threshold: 1, Ratelimit: 0
Apr 30 23:23:04 Gamma-Ray igmpproxy: Note: adding VIF, Ix 4 Fl 0x0 IP
0x0102a8c0 vlan3, Threshold: 1, Ratelimit: 0
Apr 30 23:23:04 Gamma-Ray igmpproxy: Note: adding VIF, Ix 5 Fl 0x0 IP
0x010110ac vlan30, Threshold: 1, Ratelimit: 0
Apr 30 23:23:04 Gamma-Ray igmpproxy: Note: adding VIF, Ix 6 Fl 0x0 IP
0x018ca8c0 vlan50, Threshold: 1, Ratelimit: 0
Apr 30 23:23:04 Gamma-Ray igmpproxy: Note: adding VIF, Ix 7 Fl 0x0 IP
0x0137a8c0 vlan55, Threshold: 1, Ratelimit: 0
Apr 30 23:23:04 Gamma-Ray igmpproxy: Note: adding VIF, Ix 8 Fl 0x0 IP
0x7602b251 pppoe0, Threshold: 1, Ratelimit: 0
Apr 30 23:23:04 Gamma-Ray igmpproxy: Note: adding VIF, Ix 9 Fl 0x0 IP
0x01c8c80a tun0, Threshold: 1, Ratelimit: 0
Apr 30 23:23:04 Gamma-Ray igmpproxy: Note: adding VIF, Ix 10 Fl 0x0 IP
0x01c9c90a tun1, Threshold: 1, Ratelimit: 0
Apr 30 23:23:04 Gamma-Ray igmpproxy: ERRO: MRT_ADD_VIF; Errno(45):
Operation not supported
which is exactly the same output as when run manually:
/usr/local/sbin/igmpproxy
igmpproxy, Version 0.1 beta2, Build 140421
Copyright 2005 by Johnny Egeland <[email protected]>
Distributed under the GNU GENERAL PUBLIC LICENSE, Version 2 - check GPL.txt
ERRO: MRT_ADD_VIF; Errno(45): Operation not supported
I have attempted to install the package:
pkg_add igmpproxy
using my local mirror:
ftp://mirror.exonetric.net/pub/OpenBSD/snapshots/packages/`machine -a`/
I have also attempted to build from ports:
http://www.openbsd.org/anoncvs.html
Anytime afterwards, to `update' this tree:
(If you are following current):
# cd /usr/ports
# cvs -q up -Pd
Then:
cd /usr/ports/net/igmpproxy
make
make install
make clean
Unfortunately in both cases the result is the same.
Dmesg output:
OpenBSD 5.5-current (GENERIC.MP) #86: Tue Apr 29 03:35:46 MDT 2014
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 8537219072 (8141MB)
avail mem = 8301232128 (7916MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xec640 (117 entries)
bios0: vendor American Megatrends Inc. version "3.0" date 07/05/2013
bios0: Supermicro X9SRE/X9SRE-3F/X9SRi/X9SRi-3F
acpi0 at bios0: rev 2
acpi0: sleep states S0 S1 S4 S5
acpi0: tables DSDT FACP APIC FPDT HPET PRAD SSDT SPCR EINJ ERST HEST
BERT DMAR MCFG
acpi0: wakeup devices PS2K(S4) PS2M(S4) P0P9(S1) EUSB(S4) USBE(S4)
PEX0(S4) PEX1(S4) PEX2(S4) PEX3(S4) PEX4(S4) PEX5(S4) PEX6(S4) NPE2(S4)
NPE4(S4) NPE5(S4) PXHA(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Xeon(R) CPU E5-1620 0 @ 3.60GHz, 3600.53 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 100MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.1.2, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Xeon(R) CPU E5-1620 0 @ 3.60GHz, 3600.01 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 4 (application processor)
cpu2: Intel(R) Xeon(R) CPU E5-1620 0 @ 3.60GHz, 3600.01 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 0, core 2, package 0
cpu3 at mainbus0: apid 6 (application processor)
cpu3: Intel(R) Xeon(R) CPU E5-1620 0 @ 3.60GHz, 3600.01 MHz
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 0, core 3, package 0
ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 20, 24 pins
ioapic1 at mainbus0: apid 2 pa 0xfec01000, version 20, 24 pins
acpihpet0 at acpi0: 14318179 Hz
acpimcfg0 at acpi0 addr 0x80000000, bus 0-255
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 9 (P0P9)
acpiprt2 at acpi0: bus 7 (PEX0)
acpiprt3 at acpi0: bus -1 (PEX1)
acpiprt4 at acpi0: bus -1 (PEX2)
acpiprt5 at acpi0: bus -1 (PEX3)
acpiprt6 at acpi0: bus -1 (PEX4)
acpiprt7 at acpi0: bus -1 (PEX5)
acpiprt8 at acpi0: bus -1 (PEX6)
acpiprt9 at acpi0: bus 6 (P0PA)
acpiprt10 at acpi0: bus -1 (NPE2)
acpiprt11 at acpi0: bus -1 (NPE5)
acpiprt12 at acpi0: bus -1 (PXHA)
acpiprt13 at acpi0: bus -1 (PXHB)
acpiprt14 at acpi0: bus 1 (NPE1)
acpiprt15 at acpi0: bus 2 (NPE3)
acpiprt16 at acpi0: bus 3 (NPE7)
acpiprt17 at acpi0: bus 5 (NPE9)
acpicpu0 at acpi0: C2, C1, PSS
acpicpu1 at acpi0: C2, C1, PSS
acpicpu2 at acpi0: C2, C1, PSS
acpicpu3 at acpi0: C2, C1, PSS
acpibtn0 at acpi0: SLPB
acpibtn1 at acpi0: PWRB
ipmi at mainbus0 not configured
cpu0: Enhanced SpeedStep 3600 MHz: speeds: 3601, 3600, 3400, 3300, 3100,
2900, 2700, 2600, 2400, 2200, 2100, 1900, 1700, 1500, 1400, 1200 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel E5 Host" rev 0x07
ppb0 at pci0 dev 1 function 0 "Intel E5 PCIE" rev 0x07: msi
pci1 at ppb0 bus 1
ppb1 at pci0 dev 2 function 0 "Intel E5 PCIE" rev 0x07: msi
pci2 at ppb1 bus 2
ppb2 at pci0 dev 3 function 0 "Intel E5 PCIE" rev 0x07: msi
pci3 at ppb2 bus 3
em0 at pci3 dev 0 function 0 "Intel I350" rev 0x01: msi, address
00:25:90:d0:ba:00
em1 at pci3 dev 0 function 1 "Intel I350" rev 0x01: msi, address
00:25:90:d0:ba:01
ppb3 at pci0 dev 3 function 2 "Intel E5 PCIE" rev 0x07: msi
pci4 at ppb3 bus 5
"Intel E5 DMA" rev 0x07 at pci0 dev 4 function 0 not configured
"Intel E5 DMA" rev 0x07 at pci0 dev 4 function 1 not configured
"Intel E5 DMA" rev 0x07 at pci0 dev 4 function 2 not configured
"Intel E5 DMA" rev 0x07 at pci0 dev 4 function 3 not configured
"Intel E5 DMA" rev 0x07 at pci0 dev 4 function 4 not configured
"Intel E5 DMA" rev 0x07 at pci0 dev 4 function 5 not configured
"Intel E5 DMA" rev 0x07 at pci0 dev 4 function 6 not configured
"Intel E5 DMA" rev 0x07 at pci0 dev 4 function 7 not configured
"Intel E5 Address Map" rev 0x07 at pci0 dev 5 function 0 not configured
"Intel E5 Error Reporting" rev 0x07 at pci0 dev 5 function 2 not configured
"Intel E5 I/O APIC" rev 0x07 at pci0 dev 5 function 4 not configured
ppb4 at pci0 dev 17 function 0 "Intel C600 Virtual PCIE" rev 0x06
pci5 at ppb4 bus 6
vendor "Intel", unknown product 0x1d6b (class mass storage subclass SAS,
rev 0x06) at pci5 dev 0 function 0 not configured
"Intel C600 MEI" rev 0x05 at pci0 dev 22 function 0 not configured
"Intel C600 MEI" rev 0x05 at pci0 dev 22 function 1 not configured
ehci0 at pci0 dev 26 function 0 "Intel C600 USB" rev 0x06: apic 0 int 16
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb5 at pci0 dev 28 function 0 "Intel C600 PCIE" rev 0xb6: msi
pci6 at ppb5 bus 7
em2 at pci6 dev 0 function 0 "Intel I350" rev 0x01: msi, address
00:25:90:c9:62:dc
em3 at pci6 dev 0 function 1 "Intel I350" rev 0x01: msi, address
00:25:90:c9:62:dd
em4 at pci6 dev 0 function 2 "Intel I350" rev 0x01: msi, address
00:25:90:c9:62:de
em5 at pci6 dev 0 function 3 "Intel I350" rev 0x01: msi, address
00:25:90:c9:62:df
ehci1 at pci0 dev 29 function 0 "Intel C600 USB" rev 0x06: apic 0 int 23
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb6 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xa6
pci7 at ppb6 bus 9
vga1 at pci7 dev 4 function 0 "Matrox MGA G200eW" rev 0x0a
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 31 function 0 "Intel C600 LPC" rev 0x06
ahci0 at pci0 dev 31 function 2 "Intel C600 AHCI" rev 0x06: msi, AHCI 1.3
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, Corsair Force GT, 5.06> SCSI3
0/direct fixed naa.0000000000000000
sd0: 114473MB, 512 bytes/sector, 234441648 sectors, thin
sd1 at scsibus1 targ 1 lun 0: <ATA, Corsair Force GT, 5.07> SCSI3
0/direct fixed naa.0000000000000000
sd1: 114473MB, 512 bytes/sector, 234441648 sectors, thin
ichiic0 at pci0 dev 31 function 3 "Intel C600 SMBus" rev 0x06: apic 0 int 18
iic0 at ichiic0
lm1 at iic0 addr 0x2c: W83627DHG
iic0: addr 0x4c 04=01 44=01 84=01 c0=03 c1=01 c4=01 c6=01 ca=01 cb=01
cc=01 cd=02 cf=01 d1=02 d4=07 da=0f db=02 dd=01 de=03 words 00=ffff
01=ffff 02=ffff 03=ffff 04=01ff 05=ffff 06=ffff 07=ffff
"Intel C600 Thermal" rev 0x06 at pci0 dev 31 function 6 not configured
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
com2 at isa0 port 0x3e8/8 irq 5: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
wbsio0 at isa0 port 0x2e/2: NCT6776F rev 0x33
lm2 at wbsio0 port 0xa30/8: NCT6776F
pci8 at mainbus0 bus 255
"Intel E5 QPI Link" rev 0x07 at pci8 dev 8 function 0 not configured
vendor "Intel", unknown product 0x3c83 (class system subclass
miscellaneous, rev 0x07) at pci8 dev 8 function 3 not configured
vendor "Intel", unknown product 0x3c84 (class system subclass
miscellaneous, rev 0x07) at pci8 dev 8 function 4 not configured
"Intel E5 QPI Link" rev 0x07 at pci8 dev 9 function 0 not configured
vendor "Intel", unknown product 0x3c93 (class system subclass
miscellaneous, rev 0x07) at pci8 dev 9 function 3 not configured
vendor "Intel", unknown product 0x3c94 (class system subclass
miscellaneous, rev 0x07) at pci8 dev 9 function 4 not configured
"Intel E5 PCU" rev 0x07 at pci8 dev 10 function 0 not configured
"Intel E5 PCU" rev 0x07 at pci8 dev 10 function 1 not configured
"Intel E5 PCU" rev 0x07 at pci8 dev 10 function 2 not configured
"Intel E5 PCU" rev 0x07 at pci8 dev 10 function 3 not configured
"Intel E5 Scratch" rev 0x07 at pci8 dev 11 function 0 not configured
"Intel E5 Scratch" rev 0x07 at pci8 dev 11 function 3 not configured
"Intel E5 Unicast" rev 0x07 at pci8 dev 12 function 0 not configured
"Intel E5 Unicast" rev 0x07 at pci8 dev 12 function 1 not configured
"Intel E5 SAD" rev 0x07 at pci8 dev 12 function 6 not configured
"Intel E5 SAD" rev 0x07 at pci8 dev 12 function 7 not configured
"Intel E5 Unicast" rev 0x07 at pci8 dev 13 function 0 not configured
"Intel E5 Unicast" rev 0x07 at pci8 dev 13 function 1 not configured
"Intel E5 Broadcast" rev 0x07 at pci8 dev 13 function 6 not configured
"Intel E5 Home Agent" rev 0x07 at pci8 dev 14 function 0 not configured
"Intel E5 Home Agent" rev 0x07 at pci8 dev 14 function 1 not configured
"Intel E5 TA" rev 0x07 at pci8 dev 15 function 0 not configured
"Intel E5 RAS" rev 0x07 at pci8 dev 15 function 1 not configured
"Intel E5 TAD" rev 0x07 at pci8 dev 15 function 2 not configured
"Intel E5 TAD" rev 0x07 at pci8 dev 15 function 3 not configured
"Intel E5 TAD" rev 0x07 at pci8 dev 15 function 4 not configured
"Intel E5 TAD" rev 0x07 at pci8 dev 15 function 5 not configured
"Intel E5 TAD" rev 0x07 at pci8 dev 15 function 6 not configured
"Intel E5 Thermal" rev 0x07 at pci8 dev 16 function 0 not configured
"Intel E5 Thermal" rev 0x07 at pci8 dev 16 function 1 not configured
"Intel E5 Error" rev 0x07 at pci8 dev 16 function 2 not configured
"Intel E5 Error" rev 0x07 at pci8 dev 16 function 3 not configured
"Intel E5 Thermal" rev 0x07 at pci8 dev 16 function 4 not configured
"Intel E5 Thermal" rev 0x07 at pci8 dev 16 function 5 not configured
"Intel E5 Error" rev 0x07 at pci8 dev 16 function 6 not configured
"Intel E5 Error" rev 0x07 at pci8 dev 16 function 7 not configured
"Intel E5 DDRIO" rev 0x07 at pci8 dev 17 function 0 not configured
"Intel E5 R2PCIE" rev 0x07 at pci8 dev 19 function 0 not configured
"Intel E5 PCIE Monitor" rev 0x07 at pci8 dev 19 function 1 not configured
"Intel E5 QPI" rev 0x07 at pci8 dev 19 function 4 not configured
"Intel E5 QPI Link Monitor" rev 0x07 at pci8 dev 19 function 5 not
configured
"Intel E5 QPI Link Monitor" rev 0x07 at pci8 dev 19 function 6 not
configured
uhub2 at uhub0 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
uhidev0 at uhub2 port 1 configuration 1 interface 0 "Raptor Gaming
product 0x0103" rev 1.10/1.00 addr 3
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub2 port 1 configuration 1 interface 1 "Raptor Gaming
product 0x0103" rev 1.10/1.00 addr 3
uhidev1: iclass 3/0, 2 report ids
uhid0 at uhidev1 reportid 1: input=2, output=0, feature=0
uhid1 at uhidev1 reportid 2: input=1, output=0, feature=0
uhub3 at uhub1 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (21839269a8d9cf71.a) swap on sd0b dump on sd0b
I have updated my system as of 04/29/2014, which includes the base and
the ports tree.
The current interface layout is that I have multiple vlans, and two
tunnel interfaces, the first being for OpenVPN, while the last being for
L2TP/IPSEC.
The config file I'm using for Igmpproxy is:
########################################################
#
# Example configuration file for the IgmpProxy
# --------------------------------------------
#
# The configuration file must define one upstream
# interface, and one or more downstream interfaces.
#
# If multicast traffic originates outside the
# upstream subnet, the "altnet" option can be
# used in order to define legal multicast sources.
# (See example...)
#
# The "quickleave" should be used to avoid saturation
# of the upstream link. The option should only
# be used if it's absolutely necessary to
# accurately imitate just one Client.
#
########################################################
##------------------------------------------------------
## Enable Quickleave mode (Sends Leave instantly)
##------------------------------------------------------
quickleave
##------------------------------------------------------
## Configuration for em0 (Upstream Interface)
##------------------------------------------------------
#phyint em0 upstream ratelimit 0 threshold 1
# altnet 10.0.0.0/8
# altnet 132.185.0.0/16 # BBC multicast trial
# altnet 217.0.119.0/24 # T-Home Entertain
# altnet 193.158.35.0/24 # T-Home Entertain
phyint vlan192 upstream ratelimit 0 threshold 1
# altnet 192.168.1.120/32
# altnet 192.168.1.200/32
# altnet 192.168.20.30/32
# altnet 10.200.200.0/24
altnet 192.168.1.70/32
#phyint vlan192 upstream ratelimit 0 threshold 1
# altnet 192.168.1.120/32
# altnet 192.168.1.200/32
#phyint vlan20 upstream ratelimit 0 threshold 1
# altnet 192.168.20.30/32
##------------------------------------------------------
## Configuration for ipw0 (Downstream Interface)
##------------------------------------------------------
#phyint ipw0 downstream ratelimit 0 threshold 1
phyint vlan2 downstream ratelimit 0 threshold 1
phyint vlan20 downstream ratelimit 0 threshold 1
#phyint tun0 downstream ratelimit 0 threshold 1
# altnet 10.200.200.0/24
##------------------------------------------------------
## Configuration for lo0 (Disabled Interface)
##------------------------------------------------------
phyint lo0 disabled
phyint vlan3 disabled
phyint vlan10 disabled
phyint vlan30 disabled
phyint vlan50 disabled
phyint pppoe0 disabled
phyint em5 disabled
phyint tun0 disabled
phyint tun1 disabled
Regards,
Kaya
