Philip Guenther schrieb am 22.05.2014 09:36: > > On Wed, 21 May 2014, Nils R wrote: >> Philip Guenther schrieb am 22.05.2014 08:00: >> > On Wed, 21 May 2014, Nils R wrote: >> >> since the snapshot from 18.05., the wrong MHz of my CPU is displayed in >> >> both dmesg and apm. apmd is started at boot, here is my rc.conf.local: >> > >> > Approximately what was the date of the build you were running *before* you >> > upgraded to the misbehaving May 18 build? Days, weeks, or months earlier? >> > >> > Also, do you have a dmesg from an earlier snapshot to compare? (I don't >> > see any from hxgn.net in the [email protected] archive, so none to compare >> > from there...) >> >> Hi Philip, > > Please keep this on the bugs@ list. Someone else may have the insight > into what is going on. In this case, I'm stumped, so you really are > looking for others... >
Sorry, my mailing program messed up and i didn't check again, i sent the mail to bugs now. > >> before that, i ran the snapshot from 11.05, and that was working fine. >> Unfortunately, i don't have a dmesg from that one, but one from april, >> 22nd, where there was no issue: >> >> % head -n 2 dmesg-55current >> OpenBSD 5.5-current (GENERIC.MP) #80: Tue Apr 22 08:36:02 MDT 2014 >> [email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP > > No commits in that window jump out as likely to be related to this. > > Does this only occur after cold boot vs warm boot? > > No, also after a warm boot. > ... >> Full dmesg attached. >> >> OpenBSD 5.5-current (GENERIC.MP) #80: Tue Apr 22 08:36:02 MDT 2014 >> [email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP >> real mem = 3738107904 (3564MB) >> avail mem = 3629875200 (3461MB) >> mpath0 at root >> scsibus0 at mpath0: 256 targets >> mainbus0 at root >> bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf0100 (61 entries) >> bios0: vendor Award Software International, Inc. version "F4" date 07/28/2010 >> bios0: Gigabyte Technology Co., Ltd. GA-880GMA-UD2H >> acpi0 at bios0: rev 0 >> acpi0: sleep states S0 S3 S4 S5 >> acpi0: tables DSDT FACP SSDT HPET MCFG MATS APIC >> acpi0: wakeup devices USB0(S3) USB1(S3) USB2(S3) USB3(S3) USB4(S3) USB5(S3) >> USB6(S3) SBAZ(S4) PEX0(S5) PEX1(S5) PEX2(S5) PEX3(S5) P2P_(S5) PCE2(S4) >> PCE3(S4) PCE4(S4) [...] >> acpitimer0 at acpi0: 3579545 Hz, 32 bits >> acpihpet0 at acpi0: 14318180 Hz >> acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255 >> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat >> cpu0 at mainbus0: apid 0 (boot processor) >> cpu0: AMD Athlon(tm) II X2 240e Processor, 2813.25 MHz >> cpu0: >> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,ITSC >> cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB 64b/line >> 16-way L2 cache >> cpu0: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative >> cpu0: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative >> cpu0: AMD erratum 721 detected and fixed >> cpu0: smt 0, core 0, package 0 >> mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges >> cpu0: apic clock running at 200MHz >> cpu0: mwait min=64, max=64, C-substates=0.0.0.0.0, IBE >> cpu1 at mainbus0: apid 1 (application processor) >> cpu1: AMD Athlon(tm) II X2 240e Processor, 2812.92 MHz >> cpu1: >> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,ITSC >> cpu1: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB 64b/line >> 16-way L2 cache >> cpu1: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative >> cpu1: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative >> cpu1: AMD erratum 721 detected and fixed >> cpu1: smt 0, core 1, package 0 >> ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 21, 24 pins >> ioapic0: misconfigured as apic 0, remapped to apid 2 >> acpiprt0 at acpi0: bus 0 (PCI0) >> acpiprt1 at acpi0: bus 5 (PEX0) >> acpiprt2 at acpi0: bus 6 (PEX1) >> acpiprt3 at acpi0: bus -1 (PEX2) >> acpiprt4 at acpi0: bus -1 (PEX3) >> acpiprt5 at acpi0: bus 4 (P2P_) >> acpiprt6 at acpi0: bus -1 (PCE2) >> acpiprt7 at acpi0: bus -1 (PCE3) >> acpiprt8 at acpi0: bus -1 (PCE4) >> acpiprt9 at acpi0: bus -1 (PCE5) >> acpiprt10 at acpi0: bus -1 (PCE6) >> acpiprt11 at acpi0: bus -1 (PCE7) >> acpiprt12 at acpi0: bus 2 (PCE9) >> acpiprt13 at acpi0: bus 3 (PCEA) >> acpiprt14 at acpi0: bus -1 (PCEB) >> acpiprt15 at acpi0: bus -1 (PCEC) >> acpiprt16 at acpi0: bus 1 (AGP_) >> acpicpu0 at acpi0: PSS >> acpicpu1 at acpi0: PSS >> acpibtn0 at acpi0: PWRB >> cpu0: 2813 MHz: speeds: 2800 2100 1600 800 MHz >> pci0 at mainbus0 bus 0 >> 0:0:0: mem address conflict 0xe0000000/0x20000000 >> pchb0 at pci0 dev 0 function 0 "AMD RS880 Host" rev 0x00 >> ppb0 at pci0 dev 1 function 0 "AMD RS780 PCIE" rev 0x00 >> pci1 at ppb0 bus 1 >> radeondrm0 at pci1 dev 5 function 0 "ATI Radeon HD 4250" rev 0x00 >> drm0 at radeondrm0 >> radeondrm0: apic 2 int 18 >> azalia0 at pci1 dev 5 function 1 "ATI Radeon HD 4200 HD Audio" rev 0x00: msi >> azalia0: no supported codecs >> ppb1 at pci0 dev 9 function 0 "AMD RS780 PCIE" rev 0x00: msi >> pci2 at ppb1 bus 2 >> "NEC xHCI" rev 0x03 at pci2 dev 0 function 0 not configured >> ppb2 at pci0 dev 10 function 0 "AMD RS780 PCIE" rev 0x00: msi >> pci3 at ppb2 bus 3 >> re0 at pci3 dev 0 function 0 "Realtek 8168" rev 0x03: RTL8168D/8111D >> (0x2800), >> msi, address 1c:6f:65:82:ec:b9 >> rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 2 >> ahci0 at pci0 dev 17 function 0 "ATI SBx00 SATA" rev 0x40: apic 2 int 19, >> AHCI >> 1.2 >> scsibus1 at ahci0: 32 targets >> sd0 at scsibus1 targ 0 lun 0: <ATA, SAMSUNG SSD 830, CXM0> SCSI3 0/direct >> fixed naa.5002538043584d30 >> sd0: 244198MB, 512 bytes/sector, 500118192 sectors, thin >> sd1 at scsibus1 targ 1 lun 0: <ATA, WDC WD10EADS-19M, 01.0> SCSI3 0/direct >> fixed naa.50014ee25a2d138a >> sd1: 953869MB, 512 bytes/sector, 1953525168 sectors >> cd0 at scsibus1 targ 4 lun 0: <Optiarc, DVD RW AD-7260S, 1.03> ATAPI 5/cdrom >> removable >> ohci0 at pci0 dev 18 function 0 "ATI SB700 USB" rev 0x00: apic 2 int 18, >> version 1.0, legacy support >> ehci0 at pci0 dev 18 function 2 "ATI SB700 USB2" rev 0x00: apic 2 int 17 >> usb0 at ehci0: USB revision 2.0 >> uhub0 at usb0 "ATI EHCI root hub" rev 2.00/1.00 addr 1 >> ohci1 at pci0 dev 19 function 0 "ATI SB700 USB" rev 0x00: apic 2 int 18, >> version 1.0, legacy support >> ehci1 at pci0 dev 19 function 2 "ATI SB700 USB2" rev 0x00: apic 2 int 17 >> usb1 at ehci1: USB revision 2.0 >> uhub1 at usb1 "ATI EHCI root hub" rev 2.00/1.00 addr 1 >> piixpm0 at pci0 dev 20 function 0 "ATI SBx00 SMBus" rev 0x41: polling >> iic0 at piixpm0 >> spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM PC3-10600 >> spdmem1 at iic0 addr 0x51: 2GB DDR3 SDRAM PC3-10600 >> azalia1 at pci0 dev 20 function 2 "ATI SBx00 HD Audio" rev 0x40: apic 2 int >> 16 >> azalia1: codecs: Realtek/0x0892 >> audio0 at azalia1 >> pcib0 at pci0 dev 20 function 3 "ATI SB700 ISA" rev 0x40 >> ppb3 at pci0 dev 20 function 4 "ATI SB600 PCI" rev 0x40 >> pci4 at ppb3 bus 4 >> ath0 at pci4 dev 6 function 0 "Atheros AR2413" rev 0x01: apic 2 int 20 >> ath0: AR2413 7.8 phy 4.5 rf 5.6, FCC2A*, address 74:ea:3a:d2:ab:e0 >> ohci2 at pci0 dev 20 function 5 "ATI SB700 USB" rev 0x00: apic 2 int 18, >> version 1.0, legacy support >> ppb4 at pci0 dev 21 function 0 "ATI SB800 PCIE" rev 0x00: msi >> pci5 at ppb4 bus 5 >> jmb0 at pci5 dev 0 function 0 "JMicron JMB368 IDE" rev 0x00 >> pciide0 at jmb0: DMA, channel 0 wired to native-PCI, channel 1 wired to >> native-PCI >> pciide0: using apic 2 int 17 for native-PCI interrupt >> pciide0: channel 0 disabled (no drives) >> pciide0: channel 1 disabled (no drives) >> ppb5 at pci0 dev 21 function 1 "ATI SB800 PCIE" rev 0x00: msi >> pci6 at ppb5 bus 6 >> ohci3 at pci0 dev 22 function 0 "ATI SB700 USB" rev 0x00: apic 2 int 18, >> version 1.0, legacy support >> ehci2 at pci0 dev 22 function 2 "ATI SB700 USB2" rev 0x00: apic 2 int 17 >> usb2 at ehci2: USB revision 2.0 >> uhub2 at usb2 "ATI EHCI root hub" rev 2.00/1.00 addr 1 >> pchb1 at pci0 dev 24 function 0 "AMD AMD64 10h HyperTransport" rev 0x00 >> pchb2 at pci0 dev 24 function 1 "AMD AMD64 10h Address Map" rev 0x00 >> pchb3 at pci0 dev 24 function 2 "AMD AMD64 10h DRAM Cfg" rev 0x00 >> km0 at pci0 dev 24 function 3 "AMD AMD64 10h Misc Cfg" rev 0x00 >> pchb4 at pci0 dev 24 function 4 "AMD AMD64 10h Link Cfg" rev 0x00 >> usb3 at ohci0: USB revision 1.0 >> uhub3 at usb3 "ATI OHCI root hub" rev 1.00/1.00 addr 1 >> usb4 at ohci1: USB revision 1.0 >> uhub4 at usb4 "ATI OHCI root hub" rev 1.00/1.00 addr 1 >> isa0 at pcib0 >> isadma0 at isa0 >> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo >> pckbc0 at isa0 port 0x60/5 >> pckbd0 at pckbc0 (kbd slot) >> pckbc0: using irq 1 for kbd slot >> wskbd0 at pckbd0: console keyboard >> pcppi0 at isa0 port 0x61 >> spkr0 at pcppi0 >> it0 at isa0 port 0x2e/2: IT8720F rev 8, EC port 0x228 >> usb5 at ohci2: USB revision 1.0 >> uhub5 at usb5 "ATI OHCI root hub" rev 1.00/1.00 addr 1 >> usb6 at ohci3: USB revision 1.0 >> uhub6 at usb6 "ATI OHCI root hub" rev 1.00/1.00 addr 1 >> uhidev0 at uhub3 port 5 configuration 1 interface 0 "Logitech USB-PS/2 >> Optical >> Mouse" rev 2.00/21.00 addr 2 >> uhidev0: iclass 3/1 >> ums0 at uhidev0: 8 buttons, Z dir >> wsmouse0 at ums0 mux 0 >> vscsi0 at root >> scsibus2 at vscsi0: 256 targets >> softraid0 at root >> scsibus3 at softraid0: 256 targets >> root on sd0a (6de79c244a03d47a.a) swap on sd0b dump on sd0b >> WARNING: / was not properly unmounted >> drm: initializing kernel modesetting (RS880 0x1002:0x9715 0x1458:0xD000). >> radeondrm0: VRAM: 512M 0x00000000C0000000 - 0x00000000DFFFFFFF (512M used) >> radeondrm0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF >> drm: PCIE GART of 512M enabled (table at 0x00000000C0040000). >> radeondrm0: 1680x1050 >> wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using wskbd0 >> wsdisplay0: screen 1-5 added (std, vt100 emulation)
