Hello
If I boot the current snapshot (OpenBSD 5.5-current (GENERIC.MP) #139:
Wed May 21 09:38:42 MDT 2014) with a yubikey or usb-to-serial device
attached the port is no longer available if the device is removed.
When unplugged the yubikey message is:
wskbd2: disconnecting from wsdisplay0
wskbd2 detached
ukbd1 detached
uhidev2 detached
Plugging the same device back in doesn't cause any change. The usb
dongle for my keyboard/mouse doesn't cause the same problem.
I think this also affected the 12/12 May snapshot. Let me know if you
want further information.
Thanks, Peter
OpenBSD 5.5-current (GENERIC.MP) #139: Wed May 21 09:38:42 MDT 2014
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 3193958400 (3045MB)
avail mem = 3100237824 (2956MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.3 @ 0xf0450 (77 entries)
bios0: vendor Dell Inc. version "2.6.4" date 03/01/2010
bios0: Dell Inc. OptiPlex 745
acpi0 at bios0: rev 2
acpi0: sleep states S0 S1 S3 S4 S5
acpi0: tables DSDT FACP SSDT APIC BOOT ASF! MCFG HPET SSDT SSDT SSDT
acpi0: wakeup devices VBTN(S4) PCI0(S5) PCI4(S5) PCI2(S5) PCI3(S5)
PCI1(S5) PCI5(S5) PCI6(S5) MOU_(S3) USB0(S3) USB1(S3) USB2(S3)
USB3(S3) USB4(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Pentium(R) D CPU 3.40GHz, 3389.53 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,EST,CNXT-ID,CX16,xTPR,PDCM,NXE,LONG,LAHF
cpu0: 2MB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 199MHz
cpu0: mwait min=64, max=64
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Pentium(R) D CPU 3.40GHz, 3389.04 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,EST,CNXT-ID,CX16,xTPR,PDCM,NXE,LONG,LAHF
cpu1: 2MB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 8
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 4 (PCI4)
acpiprt1 at acpi0: bus 2 (PCI2)
acpiprt2 at acpi0: bus -1 (PCI3)
acpiprt3 at acpi0: bus 1 (PCI1)
acpiprt4 at acpi0: bus 3 (PCI5)
acpiprt5 at acpi0: bus -1 (PCI6)
acpiprt6 at acpi0: bus 0 (PCI0)
acpicpu0 at acpi0: PSS
acpicpu1 at acpi0: PSS
acpibtn0 at acpi0: VBTN
cpu0: Enhanced SpeedStep 3389 MHz: speeds: 3400, 2400 MHz
memory map conflict 0xbf603c00/0x9fc400
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel 82Q965 Host" rev 0x02
ppb0 at pci0 dev 1 function 0 "Intel 82Q965 PCIE" rev 0x02: msi
pci1 at ppb0 bus 1
vga1 at pci0 dev 2 function 0 "Intel 82Q965 Video" rev 0x02
intagp0 at vga1
agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
inteldrm0 at vga1
drm0 at inteldrm0
inteldrm0: 1024x768
wsdisplay0 at vga1 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
"Intel 82Q965 Video" rev 0x02 at pci0 dev 2 function 1 not configured
uhci0 at pci0 dev 26 function 0 "Intel 82801H USB" rev 0x02: apic 8 int 16
uhci1 at pci0 dev 26 function 1 "Intel 82801H USB" rev 0x02: apic 8 int 17
ehci0 at pci0 dev 26 function 7 "Intel 82801H USB" rev 0x02: apic 8 int 22
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 82801H HD Audio" rev 0x02: msi
azalia0: codecs: Analog Devices AD1983
audio0 at azalia0
ppb1 at pci0 dev 28 function 0 "Intel 82801H PCIE" rev 0x02: msi
pci2 at ppb1 bus 2
ppb2 at pci0 dev 28 function 4 "Intel 82801H PCIE" rev 0x02: msi
pci3 at ppb2 bus 3
bge0 at pci3 dev 0 function 0 "Broadcom BCM5754" rev 0x02,
BCM5754/5787 A2 (0xb002): msi, address 00:18:8b:66:ff:e6
brgphy0 at bge0 phy 1: BCM5787 10/100/1000baseT PHY, rev. 0
uhci2 at pci0 dev 29 function 0 "Intel 82801H USB" rev 0x02: apic 8 int 23
uhci3 at pci0 dev 29 function 1 "Intel 82801H USB" rev 0x02: apic 8 int 17
uhci4 at pci0 dev 29 function 2 "Intel 82801H USB" rev 0x02: apic 8 int 18
ehci1 at pci0 dev 29 function 7 "Intel 82801H USB" rev 0x02: apic 8 int 23
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb3 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xf2
pci4 at ppb3 bus 4
pcib0 at pci0 dev 31 function 0 "Intel 82801H LPC" rev 0x02
pciide0 at pci0 dev 31 function 2 "Intel 82801H SATA" rev 0x02: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide0: using apic 8 int 20 for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <ADATA SP800>
wd0: 16-sector PIO, LBA48, 30533MB, 62533296 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6
atapiscsi0 at pciide0 channel 1 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <SONY, DVD-ROM DDU810A, KD38> ATAPI
5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
ichiic0 at pci0 dev 31 function 3 "Intel 82801H SMBus" rev 0x02: apic 8 int 20
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 512MB DDR2 SDRAM non-parity PC2-5300CL5
spdmem1 at iic0 addr 0x51: 1GB DDR2 SDRAM non-parity PC2-5300CL5
spdmem2 at iic0 addr 0x52: 512MB DDR2 SDRAM non-parity PC2-5300CL5
spdmem3 at iic0 addr 0x53: 1GB DDR2 SDRAM non-parity PC2-5300CL5
pciide1 at pci0 dev 31 function 5 "Intel 82801H SATA" rev 0x02: DMA,
channel 0 wired to native-PCI, channel 1 wired to native-PCI
pciide1: using apic 8 int 20 for native-PCI interrupt
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
umass0 at uhub0 port 2 configuration 1 interface 0 " USB DISK 2.0" rev
2.00/1.00 addr 2
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
sd0 at scsibus2 targ 1 lun 0: <, USB DISK 2.0, PMAP> SCSI2 0/direct
removable serial.13fe410029C1ABCDC706
sd0: 7640MB, 512 bytes/sector, 15646720 sectors
uftdi0 at uhub3 port 1 "FTDI USB to Serial Cable" rev 1.10/4.00 addr 2
ucom0 at uftdi0 portno 1
uhidev0 at uhub5 port 1 configuration 1 interface 0 "Logitech USB
Receiver" rev 2.00/23.01 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub5 port 1 configuration 1 interface 1 "Logitech USB
Receiver" rev 2.00/23.01 addr 2
uhidev1: iclass 3/1, 17 report ids
ums0 at uhidev1 reportid 2: 16 buttons, Z dir
wsmouse0 at ums0 mux 0
uhid0 at uhidev1 reportid 3: input=4, output=0, feature=0
uhid1 at uhidev1 reportid 4: input=1, output=0, feature=0
uhid2 at uhidev1 reportid 16: input=6, output=6, feature=0
uhid3 at uhidev1 reportid 17: input=19, output=19, feature=0
uhidev2 at uhub6 port 2 configuration 1 interface 0 "Yubico Yubico
Yubikey II" rev 2.00/2.42 addr 2
uhidev2: iclass 3/1
ukbd1 at uhidev2: 8 variable keys, 6 key codes
wskbd2 at ukbd1 mux 1
wskbd2: connecting to wsdisplay0
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targets
sd1 at scsibus4 targ 1 lun 0: <OPENBSD, SR CRYPTO, 005> SCSI2 0/direct fixed
sd1: 27454MB, 512 bytes/sector, 56226972 sectors
root on sd1a (72082edb903076f1.a) swap on sd1b dump on sd1b
wskbd2: disconnecting from wsdisplay0
wskbd2 detached
ukbd1 detached
uhidev2 detached
ucom0 detached
uftdi0 detached
umass1 at uhub0 port 4 configuration 1 interface 0 "JetFlash Mass
Storage Device" rev 2.00/1.00 addr 3
umass1: using SCSI over Bulk-Only
scsibus5 at umass1: 2 targets, initiator 0
sd2 at scsibus5 targ 1 lun 0: <JetFlash, Transcend 16GB, 8.07> SCSI2
0/direct removable
sd2: 15320MB, 512 bytes/sector, 31375360 sectors
sd2 detached
scsibus5 detached
umass1 detached
uftdi0 at uhub3 port 1 "FTDI USB to Serial Cable" rev 1.10/4.00 addr 2
ucom0 at uftdi0 portno 1
