Hi,
I have a problem with acpitz on new installed notebook with OpenBSD 5.5
current (lastest avaible snapshot).
The notebook shutdown with:
acpitz3: critical temperature exceeded 4861C, shutting down
The first cold boot seems ok: I have been able to install a full system
(lot of ports) without shutdown.
But after reboot, the error occurs during startup. Disabling acpitz*
permit to workaround.
I can go in "no problem" state with a "really cold boot": by unplug AC
and remove battery one minute, before plug AC /+ insert battery. Until
reboot... (I haven't tested onlu unplug AC or only boot without battery).
So I have included several versions of dmesg (with/without disable acpitz*).
If need, I could try to grab dmesg when shutting down occurs.
Thanks for your help.
Sebastien Marie
**** disable acpitz* ****
OpenBSD 5.5-current (GENERIC.MP) #245: Sun Jun 29 19:19:21 MDT 2014
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 2122121216 (2023MB)
avail mem = 2056912896 (1961MB)
User Kernel Config
UKC> disable acpitz*
368 acpitz* disabled
UKC> quit
Continuing...
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf398f (23 entries)
bios0: vendor Hewlett-Packard version "68YCU Ver. F.08" date 12/15/2006
bios0: Hewlett-Packard HP Compaq nc6400 (EH522AV)
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SLIC HPET APIC MCFG TCPA SSDT SSDT SSDT SSDT SSDT
acpi0: wakeup devices C098(S5) C0F7(S3) C0F8(S3) C0F9(S3) C0FA(S3) C101(S0)
C229(S0) C111(S5) C234(S5) C117(S5) C235(S5)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM)2 CPU T5500 @ 1.66GHz, 1662.79 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,NXE,LONG,LAHF,PERF
cpu0: 2MB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 166MHz
cpu0: mwait min=64, max=64, C-substates=0.2.2.2.2, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 CPU T5500 @ 1.66GHz, 1662.50 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,NXE,LONG,LAHF,PERF
cpu1: 2MB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 1
acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
acpiprt0 at acpi0: bus 2 (C098)
acpiprt1 at acpi0: bus 8 (C101)
acpiprt2 at acpi0: bus 16 (C111)
acpiprt3 at acpi0: bus 32 (C117)
acpiprt4 at acpi0: bus 0 (C002)
acpiec0 at acpi0
acpicpu0 at acpi0: C3, C2, C1, PSS
acpicpu1 at acpi0: C3, C2, C1, PSS
acpipwrres0 at acpi0: C1E7, resource for C1E2
acpipwrres1 at acpi0: C1EF, resource for C1E8
acpipwrres2 at acpi0: C1F6, resource for C1F0
acpipwrres3 at acpi0: C220, resource for C21E
acpipwrres4 at acpi0: C228, resource for C11A
acpipwrres5 at acpi0: C32D, resource for C331
acpipwrres6 at acpi0: C32E, resource for C332
acpipwrres7 at acpi0: C32F, resource for C333
acpipwrres8 at acpi0: C330, resource for C334
acpitz at acpi0 not configured
acpitz at acpi0 not configured
acpitz at acpi0 not configured
acpitz at acpi0 not configured
acpitz at acpi0 not configured
acpibat0 at acpi0: C1B4 model "Primary" serial 15248 2068/12/16 type LIon oem
"Hewlett-Packard"
acpibat1 at acpi0: C1B3 not present
acpiac0 at acpi0: AC unit offline
acpibtn0 at acpi0: C249
acpibtn1 at acpi0: C241
acpivideo0 at acpi0: C085
cpu0: Enhanced SpeedStep 1662 MHz: speeds: 1667, 1333, 1000 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel 82945GM Host" rev 0x03
vga1 at pci0 dev 2 function 0 "Intel 82945GM Video" rev 0x03
intagp0 at vga1
agp0 at intagp0: aperture at 0xe0000000, size 0x10000000
inteldrm0 at vga1
drm0 at inteldrm0
inteldrm0: 1280x800
wsdisplay0 at vga1 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
"Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x01: msi
azalia0: codecs: Analog Devices AD1981HD, AT&T/Lucent/0x3026, using Analog
Devices AD1981HD
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01: msi
pci1 at ppb0 bus 8
bge0 at pci1 dev 0 function 0 "Broadcom BCM5753M" rev 0x21, BCM5750 C1
(0x4201): msi, address 00:1b:38:33:97:b0
brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x01: msi
pci2 at ppb1 bus 16
bwi0 at pci2 dev 0 function 0 "Broadcom BCM4312" rev 0x01: apic 1 int 17,
address 00:1a:73:6c:90:d3
ppb2 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x01: msi
pci3 at ppb2 bus 32
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: apic 1 int 20
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: apic 1 int 22
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: apic 1 int 18
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: apic 1 int 19
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 1 int 20
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe1
pci4 at ppb3 bus 2
cbb0 at pci4 dev 6 function 0 "TI PCIXX12 CardBus" rev 0x00: apic 1 int 18
"TI PCIXX12 Multimedia Card Reader" rev 0x00 at pci4 dev 6 function 2 not
configured
sdhc0 at pci4 dev 6 function 3 "TI PCIXX12 SD" rev 0x00: apic 1 int 22
sdmmc0 at sdhc0
"TI PCIXX12 Smart Card" rev 0x00 at pci4 dev 6 function 4 not configured
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 3 device 0 cacheline 0x10, lattimer 0x20
pcmcia0 at cardslot0
pcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x01
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <HL-DT-ST, DVDRAM GSA-U10N, HP06> ATAPI 5/cdrom
removable
cd0(pciide0:0:0): using PIO mode 4, DMA mode 2
pciide0: channel 1 ignored (disabled)
ahci0 at pci0 dev 31 function 2 "Intel 82801GBM AHCI" rev 0x01: msi, AHCI 1.1
scsibus2 at ahci0: 32 targets
sd0 at scsibus2 targ 0 lun 0: <ATA, ST96812AS, 7.24> SCSI3 0/direct fixed
t10.ATA_ST96812AS_5PJBLW7F
sd0: 57241MB, 512 bytes/sector, 117231408 sectors
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
wsmouse1 at pms0 mux 0
pms0: Synaptics touchpad, firmware 6.2
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
umass0 at uhub0 port 4 configuration 1 interface 0 " " rev 2.00/10.00 addr 2
umass0: using SCSI over Bulk-Only
scsibus3 at umass0: 2 targets, initiator 0
sd1 at scsibus3 targ 1 lun 0: <, , > SCSI0 0/direct removable
serial.090c1000061617000023
sd1: 7398MB, 512 bytes/sector, 15151104 sectors
ugen0 at uhub2 port 1 "AuthenTec Fingerprint Sensor" rev 1.10/6.23 addr 2
vscsi0 at root
scsibus4 at vscsi0: 256 targets
softraid0 at root
scsibus5 at softraid0: 256 targets
root on sd0a (33d716c041bdadf5.a) swap on sd0b dump on sd0b
**** normal ****
OpenBSD 5.5-current (GENERIC.MP) #245: Sun Jun 29 19:19:21 MDT 2014
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 2122121216 (2023MB)
avail mem = 2056912896 (1961MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf398f (23 entries)
bios0: vendor Hewlett-Packard version "68YCU Ver. F.08" date 12/15/2006
bios0: Hewlett-Packard HP Compaq nc6400 (EH522AV)
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SLIC HPET APIC MCFG TCPA SSDT SSDT SSDT SSDT SSDT
acpi0: wakeup devices C098(S5) C0F7(S3) C0F8(S3) C0F9(S3) C0FA(S3) C101(S0)
C229(S0) C111(S5) C234(S5) C117(S5) C235(S5)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM)2 CPU T5500 @ 1.66GHz, 1662.75 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,NXE,LONG,LAHF,PERF
cpu0: 2MB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 166MHz
cpu0: mwait min=64, max=64, C-substates=0.2.2.2.2, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 CPU T5500 @ 1.66GHz, 1662.51 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,NXE,LONG,LAHF,PERF
cpu1: 2MB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 1
acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
acpiprt0 at acpi0: bus 2 (C098)
acpiprt1 at acpi0: bus 8 (C101)
acpiprt2 at acpi0: bus 16 (C111)
acpiprt3 at acpi0: bus 32 (C117)
acpiprt4 at acpi0: bus 0 (C002)
acpiec0 at acpi0
acpicpu0 at acpi0: C2, C1, PSS
acpicpu1 at acpi0: C2, C1, PSS
acpipwrres0 at acpi0: C1E7, resource for C1E2
acpipwrres1 at acpi0: C1EF, resource for C1E8
acpipwrres2 at acpi0: C1F6, resource for C1F0
acpipwrres3 at acpi0: C220, resource for C21E
acpipwrres4 at acpi0: C228, resource for C11A
acpipwrres5 at acpi0: C32D, resource for C331
acpipwrres6 at acpi0: C32E, resource for C332
acpipwrres7 at acpi0: C32F, resource for C333
acpipwrres8 at acpi0: C330, resource for C334
acpitz0 at acpi0: critical temperature is 256 degC
acpitz1 at acpi0: critical temperature is 105 degC
acpitz2 at acpi0: critical temperature is 105 degC
acpitz3 at acpi0: critical temperature is 105 degC
acpitz4 at acpi0: critical temperature is 110 degC
acpibat0 at acpi0: C1B4 model "Primary" serial 03899 2007/05/17 type LIon oem
"Hewlett-Packard"
acpibat1 at acpi0: C1B3 not present
acpiac0 at acpi0: AC unit online
acpibtn0 at acpi0: C249
acpibtn1 at acpi0: C241
acpivideo0 at acpi0: C085
cpu0: Enhanced SpeedStep 1662 MHz: speeds: 1667, 1333, 1000 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel 82945GM Host" rev 0x03
vga1 at pci0 dev 2 function 0 "Intel 82945GM Video" rev 0x03
intagp0 at vga1
agp0 at intagp0: aperture at 0xe0000000, size 0x10000000
inteldrm0 at vga1
drm0 at inteldrm0
inteldrm0: 1280x800
wsdisplay0 at vga1 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
"Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x01: msi
azalia0: codecs: Analog Devices AD1981HD, AT&T/Lucent/0x3026, using Analog
Devices AD1981HD
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01: msi
pci1 at ppb0 bus 8
bge0 at pci1 dev 0 function 0 "Broadcom BCM5753M" rev 0x21, BCM5750 C1
(0x4201): msi, address 00:1b:38:33:97:b0
brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x01: msi
pci2 at ppb1 bus 16
bwi0 at pci2 dev 0 function 0 "Broadcom BCM4312" rev 0x01: apic 1 int 17,
address 00:1a:73:6c:90:d3
ppb2 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x01: msi
pci3 at ppb2 bus 32
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: apic 1 int 20
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: apic 1 int 22
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: apic 1 int 18
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: apic 1 int 19
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 1 int 20
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe1
pci4 at ppb3 bus 2
cbb0 at pci4 dev 6 function 0 "TI PCIXX12 CardBus" rev 0x00: apic 1 int 18
"TI PCIXX12 Multimedia Card Reader" rev 0x00 at pci4 dev 6 function 2 not
configured
sdhc0 at pci4 dev 6 function 3 "TI PCIXX12 SD" rev 0x00: apic 1 int 22
sdmmc0 at sdhc0
"TI PCIXX12 Smart Card" rev 0x00 at pci4 dev 6 function 4 not configured
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 3 device 0 cacheline 0x10, lattimer 0x20
pcmcia0 at cardslot0
pcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x01
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <HL-DT-ST, DVDRAM GSA-U10N, HP06> ATAPI 5/cdrom
removable
cd0(pciide0:0:0): using PIO mode 4, DMA mode 2
pciide0: channel 1 ignored (disabled)
ahci0 at pci0 dev 31 function 2 "Intel 82801GBM AHCI" rev 0x01: msi, AHCI 1.1
scsibus2 at ahci0: 32 targets
sd0 at scsibus2 targ 0 lun 0: <ATA, ST96812AS, 7.24> SCSI3 0/direct fixed
t10.ATA_ST96812AS_5PJBLW7F
sd0: 57241MB, 512 bytes/sector, 117231408 sectors
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
wsmouse1 at pms0 mux 0
pms0: Synaptics touchpad, firmware 6.2
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
ugen0 at uhub2 port 1 "AuthenTec Fingerprint Sensor" rev 1.10/6.23 addr 2
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targets
root on sd0a (33d716c041bdadf5.a) swap on sd0b dump on sd0b
