Hello, I am trying in vain to install OpenBSD 5.5 (amd64) on a Nexcom NSA 5150 network appliance but as soon as I have installed it the system does not boot. In fact it hangs at the AMI BIOS screen and does not go further. I even need to disconnect/remove the storage in order to get it back working (and access the BIOS again).
So far I have tried to install on the following media: - Apacer SSD flash 8 GB - WD 250 GB SATA hard drive - SanDisk Cruzer 4 GB USB key I also tried to install OpenBSD 5.6 current from the snapshots (releases from the 18th and 22nd of September) without any success neither. Could this be a bug in a driver of OpenBSD? The link to the exact hardware specifications can be found here:http://www.nexcom.com/Products/network-and-communication-solutions/mainstream-appliance/mainstream-appliance)/network-security-appliance-nsa-5150 and here below would be the dmesg (as taken from the installation shell). Do not hesitate to contact me back if you need any more information. Best regards ML OpenBSD 5.6-current (RAMDISK_CD) #356: Mon Sep 22 02:28:20 MDT 2014 [email protected]:/usr/src/sys/arch/amd64/compile/RAMDISK_CD real mem = 17101459456 (16309MB) avail mem = 16640835584 (15869MB) mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xe9880 (77 entries) bios0: vendor American Megatrends Inc. version "4.6.5" date 07/17/2014 bios0: INTEL Corporation DENLOW_WS acpi0 at bios0: rev 2 acpi0: sleep states S0 S5 acpi0: tables DSDT FACP APIC FPDT SSDT MCFG HPET SSDT SSDT ASF! SPCR DMAR EINJ ERST HEST BERT acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Xeon(R) CPU E3-1275 v3 @ 3.50GHz, 3691.91 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM cpu0: 256KB 64b/line 8-way L2 cache cpu0: apic clock running at 99MHz cpu at mainbus0: not configured cpu at mainbus0: not configured cpu at mainbus0: not configured cpu at mainbus0: not configured cpu at mainbus0: not configured cpu at mainbus0: not configured cpu at mainbus0: not configured ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 4 (RP01) acpiprt2 at acpi0: bus 5 (RP04) acpiprt3 at acpi0: bus 1 (P0P2) acpiprt4 at acpi0: bus 2 (P0PA) acpiprt5 at acpi0: bus 3 (P0PB) acpiprt6 at acpi0: bus 1 (PEG0) acpiprt7 at acpi0: bus 2 (PEG1) acpiprt8 at acpi0: bus 3 (PEG2) pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "Intel Xeon E3-1200 v3 Host" rev 0x06 ppb0 at pci0 dev 1 function 0 "Intel Core 4G PCIE" rev 0x06: msi pci1 at ppb0 bus 1 ix0 at pci1 dev 0 function 0 "Intel 82599" rev 0x01: msi, address 00:10:f3:xx:xx:xx ix1 at pci1 dev 0 function 1 "Intel 82599" rev 0x01: msi, address 00:10:f3:xx:xx:xx ppb1 at pci0 dev 1 function 1 "Intel Core 4G PCIE" rev 0x06: msi pci2 at ppb1 bus 2 em0 at pci2 dev 0 function 0 "Intel I350" rev 0x01: msi, address 00:10:f3:xx:xx:xx em1 at pci2 dev 0 function 1 "Intel I350" rev 0x01: msi, address 00:10:f3:xx:xx:xx em2 at pci2 dev 0 function 2 "Intel I350" rev 0x01: msi, address 00:10:f3:xx:xx:xx em3 at pci2 dev 0 function 3 "Intel I350" rev 0x01: msi, address 00:10:f3:xx:xx:xx ppb2 at pci0 dev 1 function 2 "Intel Core 4G PCIE" rev 0x06: msi pci3 at ppb2 bus 3 em4 at pci3 dev 0 function 0 "Intel I350" rev 0x01: msi, address 00:10:f3:xx:xx:xx em5 at pci3 dev 0 function 1 "Intel I350" rev 0x01: msi, address 00:10:f3:xx:xx:xx em6 at pci3 dev 0 function 2 "Intel I350" rev 0x01: msi, address 00:10:f3:xx:xx:xx em7 at pci3 dev 0 function 3 "Intel I350" rev 0x01: msi, address 00:10:f3:xx:xx:xx "Intel 8 Series xHCI" rev 0x05 at pci0 dev 20 function 0 not configured ehci0 at pci0 dev 26 function 0 "Intel 8 Series USB" rev 0x05: apic 2 int 16 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 ppb3 at pci0 dev 28 function 0 "Intel 8 Series PCIE" rev 0xd5: msi pci4 at ppb3 bus 4 ppb4 at pci0 dev 28 function 3 "Intel 8 Series PCIE" rev 0xd5: msi pci5 at ppb4 bus 5 ppb5 at pci5 dev 0 function 0 "ASPEED Technology AST1150 PCI" rev 0x02 pci6 at ppb5 bus 6 vga1 at pci6 dev 0 function 0 "ASPEED Technology AST2000" rev 0x21 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) ehci1 at pci0 dev 29 function 0 "Intel 8 Series USB" rev 0x05: apic 2 int 23 usb1 at ehci1: USB revision 2.0 uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 "Intel C226 LPC" rev 0x05 at pci0 dev 31 function 0 not configured "Intel 8 Series SMBus" rev 0x05 at pci0 dev 31 function 3 not configured isa0 at mainbus0 com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo com0: console com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 uhub2 at uhub0 port 1 "vendor 0x8087 product 0x8008" rev 2.00/0.05 addr 2 uhub3 at uhub1 port 1 "vendor 0x8087 product 0x8000" rev 2.00/0.05 addr 2 uhidev0 at uhub3 port 3 configuration 1 interface 0 "Logitech Logitech USB Keyboard" rev 1.10/23.00 addr 3 uhidev0: iclass 3/1 ukbd0 at uhidev0 wskbd1 at ukbd0 mux 1 wskbd1: connecting to wsdisplay0 uhidev1 at uhub3 port 3 configuration 1 interface 1 "Logitech Logitech USB Keyboard" rev 1.10/23.00 addr 3 uhidev1: iclass 3/0, 2 report ids uhid at uhidev1 reportid 1 not configured uhid at uhidev1 reportid 2 not configured softraid0 at root scsibus0 at softraid0: 256 targets PXE boot MAC address 00:10:f3:3b:70:a2, interface em0 root on rd0a swap on rd0b dump on rd0b
