This is the lot from the serial console, some cut-n-paste in the middle
somewhere, but the kernel says:

OpenBSD 5.6-current (GENERIC.MP) #578: Tue Nov 18 16:29:25 MST 2014

    [email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP



Attempting Boot From CD-ROM

Attempting Boot From Hard Drive (C:)

Using drive 0, partition 3.

Loading.....

probing: pc0 com0 com1 mem[637K 3325M 2815M a20=on]

disk: fd0 fd1 hd0+

>> OpenBSD/amd64 BOOT 3.28

switching console to com0

                         penBSD/amd64 BOOT 3.28

boot>

booting hd0a:/bsd: 6686560+2126700+250888+0+593248
[72+556416+370309]=0xa1a430

entry point at 0x1000160 [7205c766, 34000004, 24448b12, 1040a304]

[ using 927440 bytes of bsd ELF symbol table ]

Copyright (c) 1982, 1986, 1989, 1991, 1993

        The Regents of the University of California.  All rights reserved.

Copyright (c) 1995-2014 OpenBSD. All rights reserved.
http://www.OpenBSD.org


OpenBSD 5.6-current (GENERIC.MP) #578: Tue Nov 18 16:29:25 MST 2014

    [email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP

real mem = 6424453120 (6126MB)

avail mem = 6249586688 (5960MB)

mpath0 at root

scsibus0 at mpath0: 256 targets

mainbus0 at root

bios0 at mainbus0: SMBIOS rev. 2.3 @ 0xec000 (109 entries)

bios0: vendor HP version "P59" date 04/17/2007

bios0: HP ProLiant DL580 G4

acpi0 at bios0: rev 2

acpi0: sleep states S0 S4 S5

acpi0: tables DSDT FACP SPCR SRAT MCFG APIC SSDT SSDT

acpi0: wakeup devices

acpitimer0 at acpi0: 3579545 Hz, 24 bits

acpimcfg0 at acpi0 addr 0xd0000000, bus 0-255

acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat

cpu0 at mainbus0: apid 0 (boot processor)

cpu0: Intel(R) Xeon(TM) CPU 3.40GHz, 3391.95 MHz

cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MW

AIT,DS-CPL,VMX,EST,TM2,CNXT-ID,CX16,xTPR,PDCM,NXE,LONG,LAHF

cpu0: 1MB 64b/line 8-way L2 cache

cpu0: smt 0, core 0, package 0

mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges

cpu0: apic clock running at 199MHz

cpu1 at mainbus0: apid 4 (application processor)

cpu1: Intel(R) Xeon(TM) CPU 3.40GHz, 3391.51 MHz

cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MW

AIT,DS-CPL,VMX,EST,TM2,CNXT-ID,CX16,xTPR,PDCM,NXE,LONG,LAHF

cpu1: 1MB 64b/line 8-way L2 cache

cpu1: smt 0, core 0, package 1

cpu2 at mainbus0: apid 2 (application processor)

cpu2: Intel(R) Xeon(TM) CPU 3.40GHz, 3391.51 MHz

cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MW

AIT,DS-CPL,VMX,EST,TM2,CNXT-ID,CX16,xTPR,PDCM,NXE,LONG,LAHF

cpu2: 1MB 64b/line 8-way L2 cache

cpu2: smt 0, core 1, package 0

cpu3 at mainbus0: apid 6 (application processor)

cpu3: Intel(R) Xeon(TM) CPU 3.40GHz, 3391.51 MHz

cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MW

AIT,DS-CPL,VMX,EST,TM2,CNXT-ID,CX16,xTPR,PDCM,NXE,LONG,LAHF

cpu3: 1MB 64b/line 8-way L2 cache

cpu3: smt 0, core 1, package 1

cpu4 at mainbus0: apid 1 (application processor)

cpu4: Intel(R) Xeon(TM) CPU 3.40GHz, 3391.51 MHz

cpu4:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MW

AIT,DS-CPL,VMX,EST,TM2,CNXT-ID,CX16,xTPR,PDCM,NXE,LONG,LAHF

cpu4: 1MB 64b/line 8-way L2 cache

cpu4: smt 1, core 0, package 0

cpu5 at mainbus0: apid 5 (application processor)

cpu5: Intel(R) Xeon(TM) CPU 3.40GHz, 3391.52 MHz

cpu5:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MW

AIT,DS-CPL,VMX,EST,TM2,CNXT-ID,CX16,xTPR,PDCM,NXE,LONG,LAHF

cpu5: 1MB 64b/line 8-way L2 cache

cpu5: smt 1, core 0, package 1

cpu6 at mainbus0: apid 3 (application processor)

cpu6: Intel(R) Xeon(TM) CPU 3.40GHz, 3391.51 MHz

cpu6:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MW

AIT,DS-CPL,VMX,EST,TM2,CNXT-ID,CX16,xTPR,PDCM,NXE,LONG,LAHF

cpu6: 1MB 64b/line 8-way L2 cache

cpu6: smt 1, core 1, package 0

cpu7 at mainbus0: apid 7 (application processor)

cpu7: Intel(R) Xeon(TM) CPU 3.40GHz, 3391.51 MHz

cpu7:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MW

AIT,DS-CPL,VMX,EST,TM2,CNXT-ID,CX16,xTPR,PDCM,NXE,LONG,LAHF

cpu7: 1MB 64b/line 8-way L2 cache

cpu7: smt 1, core 1, package 1

ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins

ioapic1 at mainbus0: apid 4 pa 0xfec80000, version 20, 24 pins

ioapic2 at mainbus0: apid 5 pa 0xfec80800, version 20, 24 pins

acpimadt0: unknown apic structure type ff

acpimadt0: unknown apic structure type ff

acpiprt0 at acpi0: bus 1 (IP2P)

acpiprt1 at acpi0: bus 9 (PXHA)

acpiprt2 at acpi0: bus 10 (PXHB)

acpiprt3 at acpi0: bus 8 (PTD0)

acpiprt4 at acpi0: bus 2 (PTA0)

acpiprt5 at acpi0: bus 5 (PTA1)

acpiprt6 at acpi0: bus 13 (PTB0)

acpiprt7 at acpi0: bus 16 (PTB1)

acpiprt8 at acpi0: bus 19 (PTC0)

acpiprt9 at acpi0: bus 22 (PTC1)

acpiprt10 at acpi0: bus 0 (PCI0)

acpicpu0 at acpi0: FVS, 3400, 2800 MHz

acpicpu1 at acpi0: FVS, 3400, 2800 MHz

acpicpu2 at acpi0: FVS, 3400, 2800 MHz

acpicpu3 at acpi0: FVS, 3400, 2800 MHz

acpicpu4 at acpi0: FVS, 3400, 2800 MHz

acpicpu5 at acpi0: FVS, 3400, 2800 MHz

acpicpu6 at acpi0: FVS, 3400, 2800 MHz

acpitz0 at acpi0: critical temperature is 31 degC

pci0 at mainbus0 bus 0

pchb0 at pci0 dev 0 function 0 "Intel E8500 Host" rev 0x11

ppb0 at pci0 dev 1 function 0 "Intel E8500 PCIE" rev 0x11

pci1 at ppb0 bus 8

ppb1 at pci1 dev 0 function 0 "Intel 6700PXH PCIE-PCIX" rev 0x09

pci2 at ppb1 bus 9

pci4 at ppb3 bus 19

pci5 at ppb4 bus 22
                                                      [54/1633]

ppb5 at pci0 dev 4 function 0 "Intel E8500 PCIE" rev 0x11: msi

pci6 at ppb5 bus 13

ciss0 at pci6 dev 0 function 0 "Hewlett-Packard Smart Array" rev 0x03: apic
1 int 16

ciss0: 1 LD, HW rev 3, FW 4.06/4.06, 64bit fifo

scsibus1 at ciss0: 1 targets

sd0 at scsibus1 targ 0 lun 0: <HP, LOGICAL VOLUME, 4.06> SCSI3 0/direct
fixed

sd0: 209924MB, 512 bytes/sector, 429925920 sectors

ppb6 at pci0 dev 5 function 0 "Intel E8500 PCIE" rev 0x11: msi

pci7 at ppb6 bus 16

ppb7 at pci0 dev 6 function 0 "Intel E8500 PCIE" rev 0x11: msi

pci8 at ppb7 bus 2

ppb8 at pci0 dev 7 function 0 "Intel E8500 PCIE" rev 0x11: msi

pci9 at ppb8 bus 5

pchb1 at pci0 dev 8 function 0 "Intel E8500 IMI" rev 0x11

"Intel E8500 XMB" rev 0x11 at pci0 dev 9 function 0 not configured

"Intel E8500 XMB Misc" rev 0x11 at pci0 dev 9 function 1 not configured

"Intel E8500 XMB MAI" rev 0x11 at pci0 dev 9 function 2 not configured

"Intel E8500 XMB DDR" rev 0x11 at pci0 dev 9 function 3 not configured

"Intel E8500 XMB Reserved" rev 0x11 at pci0 dev 9 function 4 not configured

"Intel E8500 XMB Reserved" rev 0x11 at pci0 dev 9 function 5 not configured

"Intel E8500 XMB Reserved" rev 0x11 at pci0 dev 9 function 6 not configured

"Intel E8500 XMB Reserved" rev 0x11 at pci0 dev 9 function 7 not configured

pchb2 at pci0 dev 10 function 0 "Intel E8500 IMI" rev 0x11

"Intel E8500 XMB" rev 0x11 at pci0 dev 11 function 0 not configured

"Intel E8500 XMB Misc" rev 0x11 at pci0 dev 11 function 1 not configured

"Intel E8500 XMB MAI" rev 0x11 at pci0 dev 11 function 2 not configured

"Intel E8500 XMB DDR" rev 0x11 at pci0 dev 11 function 3 not configured

"Intel E8500 XMB Reserved" rev 0x11 at pci0 dev 11 function 4 not configured

"Intel E8500 XMB Reserved" rev 0x11 at pci0 dev 11 function 5 not configured

"Intel E8500 XMB Reserved" rev 0x11 at pci0 dev 11 function 6 not configured

"Intel E8500 XMB Reserved" rev 0x11 at pci0 dev 11 function 7 not configured

pchb3 at pci0 dev 12 function 0 "Intel E8500 IMI" rev 0x11

"Intel E8500 XMB" rev 0x11 at pci0 dev 13 function 0 not configured

"Intel E8500 XMB Misc" rev 0x11 at pci0 dev 13 function 1 not configured

"Intel E8500 XMB MAI" rev 0x11 at pci0 dev 13 function 2 not configured

"Intel E8500 XMB DDR" rev 0x11 at pci0 dev 13 function 3 not configured

"Intel E8500 XMB Reserved" rev 0x11 at pci0 dev 13 function 4 not configured

"Intel E8500 XMB Reserved" rev 0x11 at pci0 dev 13 function 5 not configured

"Intel E8500 XMB Reserved" rev 0x11 at pci0 dev 13 function 6 not configured

"Intel E8500 XMB Reserved" rev 0x11 at pci0 dev 13 function 7 not configured

pchb4 at pci0 dev 14 function 0 "Intel E8500 IMI" rev 0x11

"Intel E8500 XMB" rev 0x11 at pci0 dev 15 function 0 not configured

"Intel E8500 XMB Misc" rev 0x11 at pci0 dev 15 function 1 not configured

"Intel E8500 XMB MAI" rev 0x11 at pci0 dev 15 function 2 not configured

"Intel E8500 XMB DDR" rev 0x11 at pci0 dev 15 function 3 not configured

"Intel E8500 XMB Reserved" rev 0x11 at pci0 dev 15 function 4 not configured

"Intel E8500 XMB Reserved" rev 0x11 at pci0 dev 15 function 5 not configured

"Intel E8500 XMB Reserved" rev 0x11 at pci0 dev 15 function 6 not configured

"Intel E8500 XMB Reserved" rev 0x11 at pci0 dev 15 function 7 not configured

pchb5 at pci0 dev 16 function 0 "Intel E8500 FSB/Boot/Interrupt" rev 0x11

pchb6 at pci0 dev 16 function 1 "Intel E8500 Address Mapping" rev 0x11

pchb7 at pci0 dev 16 function 2 "Intel E8500 RAS" rev 0x11

pchb8 at pci0 dev 17 function 0 "Intel E8500 Misc" rev 0x11

pchb9 at pci0 dev 17 function 1 "Intel E8500 Misc" rev 0x11

pchb10 at pci0 dev 17 function 2 "Intel E8500 Misc" rev 0x11

pchb11 at pci0 dev 19 function 0 "Intel E8500 Reserved" rev 0x11

pchb12 at pci0 dev 19 function 1 "Intel E8500 Reserved" rev 0x11

pchb13 at pci0 dev 19 function 2 "Intel E8500 Reserved" rev 0x11

pchb14 at pci0 dev 19 function 3 "Intel E8500 Reserved" rev 0x11

pchb15 at pci0 dev 19 function 4 "Intel E8500 Reserved" rev 0x11

pchb16 at pci0 dev 19 function 5 "Intel E8500 Reserved" rev 0x11

pchb17 at pci0 dev 19 function 6 "Intel E8500 Reserved" rev 0x11

pchb18 at pci0 dev 19 function 7 "Intel E8500 Reserved" rev 0x11

uhci0 at pci0 dev 29 function 0 "Intel 82801EB/ER USB" rev 0x02: apic 1 int
16

uhci1 at pci0 dev 29 function 1 "Intel 82801EB/ER USB" rev 0x02: apic 1 int
19

uhci2 at pci0 dev 29 function 2 "Intel 82801EB/ER USB" rev 0x02: apic 1 int
18

uhci3 at pci0 dev 29 function 3 "Intel 82801EB/ER USB" rev 0x02: apic 1 int
16

ehci0 at pci0 dev 29 function 7 "Intel 82801EB/ER USB2" rev 0x02: apic 1
int 23

usb0 at ehci0: USB revision 2.0

uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1

ppb9 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xc2

pci10 at ppb9 bus 1

radeondrm0 at pci10 dev 3 function 0 "ATI ES1000" rev 0x02

drm0 at radeondrm0

radeondrm0: apic 1 int 23

"Compaq iLO" rev 0x03 at pci10 dev 4 function 0 not configured

"Compaq iLO" rev 0x03 at pci10 dev 4 function 2 not configured

uhci4 at pci10 dev 4 function 4 "Hewlett-Packard USB" rev 0x00: apic 1 int
22

usb1 at uhci4: USB revision 1.0

uhub1 at usb1 "Hewlett-Packard UHCI root hub" rev 1.00/1.00 addr 1

pcib0 at pci0 dev 31 function 0 "Intel 82801EB/ER LPC" rev 0x02

pciide0 at pci0 dev 31 function 1 "Intel 82801EB/ER IDE" rev 0x02: DMA,
channel 0 configured to compatibility, channel 1 configured to comp

atibility

atapiscsi0 at pciide0 channel 0 drive 0

scsibus2 at atapiscsi0: 2 targets

cd0 at scsibus2 targ 0 lun 0: <HL-DT-ST, RW/DVD GCC-C10N, 2.00> ATAPI
5/cdrom removable

cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2

pciide0: channel 1 disabled (no drives)

usb2 at uhci0: USB revision 1.0

uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1

usb3 at uhci1: USB revision 1.0

uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1

usb4 at uhci2: USB revision 1.0

uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1

usb5 at uhci3: USB revision 1.0

uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1

isa0 at pcib0

isadma0 at isa0

com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo

com0: console

com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo

com1: probed fifo depth: 0 bytes

pckbc0 at isa0 port 0x60/5

pckbd0 at pckbc0 (kbd slot)

pckbc0: using irq 1 for kbd slot

wskbd0 at pckbd0: console keyboard

pcppi0 at isa0 port 0x61

spkr0 at pcppi0

uhidev0 at uhub1 port 1 configuration 1 interface 0 "HP Virtual Keyboard"
rev 1.10/0.02 addr 2

uhidev0: iclass 3/1

ukbd0 at uhidev0: 8 variable keys, 6 key codes, country code 33

wskbd1 at ukbd0 mux 1

ukbd0 at uhidev0: 8 variable keys, 6 key codes, country code 33

wskbd1 at ukbd0 mux 1

uhidev1 at uhub1 port 1 configuration 1 interface 1 "HP Virtual Keyboard"
rev 1.10/0.02 addr 2

uhidev1: iclass 3/1

ums0 at uhidev1: 3 buttons

wsmouse0 at ums0 mux 0

uhub6 at uhub1 port 2 "HP Virtual Hub" rev 1.10/0.01 addr 3

uplcom0 at uhub3 port 2 "Prolific Technology Inc. USB-Serial Controller"
rev 1.10/3.00 addr 2

ucom0 at uplcom0

vscsi0 at root

scsibus3 at vscsi0: 256 targets

softraid0 at root

scsibus4 at softraid0: 256 targets

root on sd0a (c7e61327a46908fa.a) swap on sd0b dump on sd0b

bnx0: address 00:1b:78:40:a1:ac

brgphy0 at bnx0 phy 1: BCM5706 10/100/1000baseT/SX PHY, rev. 2

bnx1: address 00:1b:78:40:a1:ae

brgphy1 at bnx1 phy 1: BCM5706 10/100/1000baseT/SX PHY, rev. 2

drm: initializing kernel modesetting (RV100 0x1002:0x515E 0x103C:0x31FB).

radeondrm0: VRAM: 128M 0x00000000E8000000 - 0x00000000EFFFFFFF (32M used)

radeondrm0: GTT: 512M 0x00000000C8000000 - 0x00000000E7FFFFFF

drm: PCI GART of 512M enabled (table at 0x000000000BF01000).

drm: No TV DAC info found in BIOS

radeondrm0: 1024x768

wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using wskbd0

wskbd1: connecting to wsdisplay0

wsdisplay0: screen 1-5 added (std, vt100 emulation)

Automatic boot in progress: starting file system checks.

/dev/sd0a (c7e61327a46908fa.a): file system is clean; not checking

/dev/sd0k (c7e61327a46908fa.k): file system is clean; not checking

/dev/sd0d (c7e61327a46908fa.d): file system is clean; not checking

/dev/sd0f (c7e61327a46908fa.f): file system is clean; not checking

/dev/sd0g (c7e61327a46908fa.g): file system is clean; not checking

/dev/sd0h (c7e61327a46908fa.h): file system is clean; not checking

/dev/sd0i (c7e61327a46908fa.i): file system is clean; not checking

/dev/sd0e (c7e61327a46908fa.e): file system is clean; not checking

setting tty flags

kbd: keyboard mapping set to sv

pf enabled

sysctl: fourth level name accept_rtadv in net.inet6.ip6.accept_rtadv is
invalid

ddb.panic: 1 -> 0

kern.bufcachepercent: 20 -> 90

starting network

DHCPREQUEST on bnx0 to 255.255.255.255

DHCPACK from 130.237.188.193 (00:0d:65:66:ce:d2)

bound to 130.237.188.206 -- renewal in 18000 seconds.

IPv6 autoconf: bnx0

starting early daemons: syslogd pflogd ntpd.

starting RPC daemons:.

savecore: no core dump

checking quotas: done.

clearing /tmp

starting pre-securelevel daemons:.

kern.securelevel: 0 -> 1

creating runtime link editor directory cache.

preserving editor files.

starting network daemons: sshd smtpd sndiod.

starting package daemons: cvsyncd.

starting local daemons: cron.

Wed Nov 19 09:12:37 CET 2014


OpenBSD/amd64 (c67.it.su.se) (tty00)


login: uvm_fault(0xffffffff81901260, 0x5c, 0, 1) -> e

CPU4: acpicpu setperf failed to alter frequency

CPU5: acpicpu setperf failed to alter frequency

CPU6: acpicpu setperf failed to alter frequency

CPU1: acpicpu setperf failed to alter frequency

fatal page fault in supervisor mode

trap type 6 code 0 rip ffffffff8165084f cs 8 rflags 10246 cr2  5c cpl e rsp
ffff800026170d68

panic: trap type 6, code=0, pc=ffffffff8165084f

Starting stack trace...

panic() at panic+0x10b

trap() at trap+0x838

--- trap (number 6) ---

acpicpu_setperf() at acpicpu_setperf+0x4f

x86_ipi_handler() at x86_ipi_handler+0x64

Xresume_lapic_ipi() at Xresume_lapic_ipi+0x1b

--- interrupt ---

Bad frame pointer: 0xffff800026170f10

end trace frame: 0xffff800026170f10, count: 252

cpu_idle_cycle+0x13:

End of stack trace.

syncing disks...


2014-11-20 21:46 GMT+01:00 Janne Johansson <[email protected]>:

> short version from the serial console:
>
>
> OpenBSD/amd64 (hostname) (tty00)
>
>
> login: uvm_fault(0xffffffff81901260, 0x5c, 0, 1) -> e
>
> CPU4: acpicpu setperf failed to alter frequency
>
> CPU5: acpicpu setperf failed to alter frequency
>
> CPU6: acpicpu setperf failed to alter frequency
>
> CPU1: acpicpu setperf failed to alter frequency
>
> fatal page fault in supervisor mode
>
> trap type 6 code 0 rip ffffffff8165084f cs 8 rflags 10246 cr2  5c cpl e
> rsp ffff800026170d68
>
> panic: trap type 6, code=0, pc=ffffffff8165084f
>
> Starting stack trace...
>
> panic() at panic+0x10b
>
> trap() at trap+0x838
>
> --- trap (number 6) ---
>
> acpicpu_setperf() at acpicpu_setperf+0x4f
>
> x86_ipi_handler() at x86_ipi_handler+0x64
>
> Xresume_lapic_ipi() at Xresume_lapic_ipi+0x1b
>
> --- interrupt ---
>
> Bad frame pointer: 0xffff800026170f10
>
> end trace frame: 0xffff800026170f10, count: 252
>
> cpu_idle_cycle+0x13:
>
> End of stack trace.
>
> syncing disks...
>
> ..will add full demise later when I have assembled it from the scrollback
> buffers.
>
>
>
> --
> May the most significant bit of your life be positive.
>



-- 
May the most significant bit of your life be positive.

Reply via email to