> Ok, so patched as requested, recompiled the kernel. Including the
> command itself, a new dmesg as it has some new information, the ps,
> trace and show registers outputs.
> Let me know if you need anything further.
I have dusted a pre-ioapic system here...
[...]
cpu0: AMD-K6tm w/ multimedia extensions ("AuthenticAMD" 586-class) 234 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,MMX
real mem = 66646016 (63MB)
avail mem = 55558144 (52MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 02/26/98, BIOS32 rev. 0 @ 0xfb440
apm0 at bios0: Power Management spec V1.2 (slowidle)
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xb8b8
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdd30/128 (6 entries)
pcibios0: PCI Exclusive IRQs: 5 9 10 11
pcibios0: PCI Interrupt Router at 000:07:0 ("Intel 82371SB ISA" rev 0x00)
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xc0000/0x8000
cpu0 at mainbus0: (uniprocessor)
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
[...]
... in order to check if your issue is specific to bwi or not. The
upgrade from bsd.rd ran smoothly, but GENERIC drops into ddb at the end
of autoconf, before the kernel even gets a chance to start init.
I'll try and investigate this regression further next weekend.
