On Tue, Apr 07, 2015 at 10:34:29PM +0200, Daniel Jakots wrote: > Hi, > > I bought recently a D-Link DGE-528T because it was said in re(4) > that it is working.
this is probably due to my jumbo diff. i can't repro this problem on my re(4)s, but could you try it with the following patch applied? i missed fixing up RL_JUMBO_MTU_7K and i think your chip will use it. Index: rtl81x9reg.h =================================================================== RCS file: /cvs/src/sys/dev/ic/rtl81x9reg.h,v retrieving revision 1.93 diff -u -p -u -r1.93 rtl81x9reg.h --- rtl81x9reg.h 20 Mar 2015 12:04:09 -0000 1.93 +++ rtl81x9reg.h 8 Apr 2015 09:52:10 -0000 @@ -751,7 +751,7 @@ struct rl_stats { #define RL_JUMBO_MTU_6K \ ((6 * 1024) - ETHER_HDR_LEN - ETHER_CRC_LEN - ETHER_VLAN_ENCAP_LEN) #define RL_JUMBO_MTU_7K \ - (RL_JUMBO_FRAMELEN - ETHER_HDR_LEN - ETHER_CRC_LEN - ETHER_VLAN_ENCAP_LEN) + ((7 * 1024) - ETHER_HDR_LEN - ETHER_CRC_LEN - ETHER_VLAN_ENCAP_LEN) #define RL_JUMBO_MTU_9K \ ((9 * 1024) - ETHER_HDR_LEN - ETHER_CRC_LEN - ETHER_VLAN_ENCAP_LEN) #define RL_MTU ETHERMTU > > I can get a lease dhcp but then connection doesn't work reliably. > For instance, if I go with firefox on www.openbsd.org, all I get is: > > <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"> > <html> > <head> > <title>OpenBSD</title> > <meta name="resource-type" content="document"> > <meta http-equiv="Content-Type" content="text/html; > charset=iso-8859-1"> <meta name="description" content="the main OpenBSD > page"> <meta name="keywords" content="openbsd,main"> > <meta name="distribution" content="global"> > <meta name="copyright" content="This document copyright 1999-2014 > by OpenBSD."> <link rel="shortcut icon" HREF="/favicon.ico" > TYPE="image/x-icon"> </head> > <body text="#000000" bgcolor="#ffffff" topmargin=0 leftmargin=0 > marginheight=0 marginwidth=0> <table width="10 > > then there's some garbage and that's all that 'view source' shows. > > If I ssh my server running amd64 5.6 -stable, I get: > > ssh_dispatch_run_fatal: message authentication code incorrect > > but strangely enough, if I ssh my router (pcengines apu) running also > amd64 5.6 -stable it works, the only difference is there I use ed25519 > keys whereas on my server it's a RSA key. > > I tested some kernel to see when the problem appears: > - bsd.mp 19-Mar-2015 is working correctly (I mean, I don't have these > problems at least) > - bsd.mp 26-Mar-2015 isn't working > > The dmesg while I'm still running bsd.mp from 26t March snapshot > (hint, it's re1, not re0, I don't use re0 because I have problem with > that NIC): > > OpenBSD 5.7-current (GENERIC.MP) #896: Thu Mar 26 14:56:12 MDT 2015 > t...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP > real mem = 2129526784 (2030MB) > avail mem = 2061189120 (1965MB) > mpath0 at root > scsibus0 at mpath0: 256 targets > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf0100 (39 entries) > bios0: vendor Award Software International, Inc. version "F6" date > 09/07/2007 bios0: Gigabyte Technology Co., Ltd. P35-DS3R > acpi0 at bios0: rev 0 > acpi0: sleep states S0 S3 S4 S5 > acpi0: tables DSDT FACP HPET MCFG APIC SSDT SSDT > acpi0: wakeup devices PEX0(S5) PEX1(S5) PEX2(S5) PEX3(S5) PEX4(S5) > PEX5(S5) HUB0(S5) UAR1(S3) IGBE(S4) USB0(S3) USB1(S3) USB2(S3) USB3(S3) > US31(S3) USB4(S3) USB5(S3) [...] acpitimer0 at acpi0: 3579545 Hz, 24 > bits acpihpet0 at acpi0: 14318179 Hz acpimcfg0 at acpi0 addr > 0xf0000000, bus 0-63 acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: Intel(R) Core(TM)2 Duo CPU E6850 @ 3.00GHz, 3000.42 MHz > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,NXE,LONG,LAHF,PERF > cpu0: 4MB 64b/line 16-way L2 cache cpu0: smt 0, core 0, package 0 > mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges > cpu0: apic clock running at 333MHz > cpu0: mwait min=64, max=64, C-substates=0.2.2.0.0, IBE > cpu1 at mainbus0: apid 1 (application processor) > cpu1: Intel(R) Core(TM)2 Duo CPU E6850 @ 3.00GHz, 3000.01 MHz > cpu1: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,NXE,LONG,LAHF,PERF > cpu1: 4MB 64b/line 16-way L2 cache cpu1: smt 0, core 1, package 0 > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins > ioapic0: misconfigured as apic 0, remapped to apid 2 > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus 2 (PEX0) > acpiprt2 at acpi0: bus -1 (PEX1) > acpiprt3 at acpi0: bus -1 (PEX2) > acpiprt4 at acpi0: bus 3 (PEX3) > acpiprt5 at acpi0: bus 4 (PEX4) > acpiprt6 at acpi0: bus -1 (PEX5) > acpiprt7 at acpi0: bus 5 (HUB0) > acpicpu0 at acpi0: FVS, 3000, 2000 MHz > acpicpu1 at acpi0: FVS, 3000, 2000 MHz > acpibtn0 at acpi0: PWRB > pci0 at mainbus0 bus 0 > pchb0 at pci0 dev 0 function 0 "Intel 82G33 Host" rev 0x02 > ppb0 at pci0 dev 1 function 0 "Intel 82G33 PCIE" rev 0x02: msi > pci1 at ppb0 bus 1 > radeondrm0 at pci1 dev 0 function 0 "ATI Radeon HD 4850" rev 0x00 > drm0 at radeondrm0 > radeondrm0: msi > azalia0 at pci1 dev 0 function 1 "ATI Radeon HD 48xx HD Audio" rev > 0x00: msi azalia0: no supported codecs > uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x02: apic 2 int > 16 uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x02: apic 2 > int 21 uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x02: > apic 2 int 18 ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev > 0x02: apic 2 int 18 usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > azalia1 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x02: msi > azalia1: codecs: Realtek ALC885 > audio0 at azalia1 > ppb1 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x02: msi > pci2 at ppb1 bus 2 > ppb2 at pci0 dev 28 function 3 "Intel 82801I PCIE" rev 0x02: msi > pci3 at ppb2 bus 3 > jmb0 at pci3 dev 0 function 0 "JMicron JMB363 IDE/SATA" rev 0x02 > ahci0 at jmb0: apic 2 int 19, AHCI 1.0 > scsibus1 at ahci0: 32 targets > pciide0 at jmb0: DMA, channel 0 wired to native-PCI, channel 1 wired to > native-PCI pciide0: using apic 2 int 19 for native-PCI interrupt > pciide0: channel 0 disabled (no drives) > pciide0: channel 1 disabled (no drives) > ppb3 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x02: msi > pci4 at ppb3 bus 4 > re0 at pci4 dev 0 function 0 "Realtek 8168" rev 0x01: RTL8168 2 > (0x3800), msi, address 00:1a:4d:5a:71:ae rgephy0 at re0 phy 7: > RTL8169S/8110S PHY, rev. 2 uhci3 at pci0 dev 29 function 0 "Intel > 82801I USB" rev 0x02: apic 2 int 23 uhci4 at pci0 dev 29 function 1 > "Intel 82801I USB" rev 0x02: apic 2 int 19 uhci5 at pci0 dev 29 > function 2 "Intel 82801I USB" rev 0x02: apic 2 int 18 ehci1 at pci0 dev > 29 function 7 "Intel 82801I USB" rev 0x02: apic 2 int 23 usb1 at ehci1: > USB revision 2.0 uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr > 1 ppb4 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x92 > pci5 at ppb4 bus 5 > re1 at pci5 dev 0 function 0 "D-Link DGE-528T" rev 0x10: RTL8169/8110SB > (0x1000), apic 2 int 20, address 6c:19:8f:9a:4b:ea rgephy1 at re1 phy > 7: RTL8169S/8110S PHY, rev. 3 pcib0 at pci0 dev 31 function 0 "Intel > 82801IR LPC" rev 0x02 pciide1 at pci0 dev 31 function 2 "Intel 82801I > SATA" rev 0x02: DMA, channel 0 configured to native-PCI, channel 1 > configured to native-PCI pciide1: using apic 2 int 19 for native-PCI > interrupt wd0 at pciide1 channel 0 drive 0: <WDC WD10EZEX-00BN5A0> wd0: > 16-sector PIO, LBA48, 953869MB, 1953525168 sectors wd0(pciide1:0:0): > using PIO mode 4, Ultra-DMA mode 6 wd1 at pciide1 channel 1 drive 0: > <WDC WD5001AALS-00L3B2> wd1: 16-sector PIO, LBA48, 476938MB, 976771055 > sectors wd1(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 6 > ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x02: apic 2 > int 18 iic0 at ichiic0 > spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-5300CL5 > spdmem1 at iic0 addr 0x52: 1GB DDR2 SDRAM non-parity PC2-5300CL5 > pciide2 at pci0 dev 31 function 5 "Intel 82801I SATA" rev 0x02: DMA, > channel 0 wired to native-PCI, channel 1 wired to native-PCI pciide2: > using apic 2 int 19 for native-PCI interrupt usb2 at uhci0: USB > revision 1.0 uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb3 at uhci1: USB revision 1.0 > uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb4 at uhci2: USB revision 1.0 > uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb5 at uhci3: USB revision 1.0 > uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb6 at uhci4: USB revision 1.0 > uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb7 at uhci5: USB revision 1.0 > uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > isa0 at pcib0 > isadma0 at isa0 > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > pckbc0 at isa0 port 0x60/5 > pckbc0: using irq 12 for aux slot > pckbd0 at pckbc0 (kbd slot) > pckbc0: using irq 1 for kbd slot > wskbd0 at pckbd0: console keyboard > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > lpt0 at isa0 port 0x378/4 irq 7 > it0 at isa0 port 0x2e/2: IT8718F rev 4, EC port 0x290 > axe0 at uhub0 port 4 configuration 1 interface 0 "ASIX Electronics > AX88772" rev 2.00/0.01 addr 2 axe0: AX88772, address 00:14:d1:b0:d0:a2 > ukphy0 at axe0 phy 16: Generic IEEE 802.3u media interface, rev. 1: OUI > 0x000ec6, model 0x0006 uhidev0 at uhub2 port 2 configuration 1 > interface 0 "Razer Razer DeathAdder" rev 2.00/1.00 addr 2 uhidev0: > iclass 3/1 ums0 at uhidev0: 7 buttons, Z dir > wsmouse0 at ums0 mux 0 > uhidev1 at uhub3 port 1 configuration 1 interface 0 "CM Storm Keyboard > -- QuickFire XT" rev 1.10/1.04 addr 2 uhidev1: iclass 3/1 > ukbd0 at uhidev1: 8 variable keys, 6 key codes > wskbd1 at ukbd0 mux 1 > uhidev2 at uhub3 port 1 configuration 1 interface 1 "CM Storm Keyboard > -- QuickFire XT" rev 1.10/1.04 addr 2 uhidev2: iclass 3/1, 2 report ids > uhid0 at uhidev2 reportid 1: input=6, output=0, feature=0 > uhid1 at uhidev2 reportid 2: input=1, output=0, feature=0 > vscsi0 at root > scsibus2 at vscsi0: 256 targets > softraid0 at root > scsibus3 at softraid0: 256 targets > sd0 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 005> SCSI2 0/direct > fixed sd0: 471814MB, 512 bytes/sector, 966277092 sectors > root on sd0a (384c27964f6e987d.a) swap on sd0b dump on sd0b > radeondrm0: 1680x1050 > wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using > wskbd0 wskbd1: connecting to wsdisplay0 > wsdisplay0: screen 1-5 added (std, vt100 emulation) > sd1 at scsibus3 targ 2 lun 0: <OPENBSD, SR CRYPTO, 005> SCSI2 0/direct > fixed sd1: 953869MB, 512 bytes/sector, 1953524640 sectors >