I am seeing the exact same crash with GENRIC.MP latest snap on i386. booting with the GENRIC kernel works for me though.
> On Apr 21, 2015, at 11:19 AM, Mark Patruck <[email protected]> wrote: > > I tried source updating my 3 weeks old i386 OpenBSD 5.7-current and > after booting the new kernel it crashed after fsck'ing. Just to make > sure, i did an update via latest snapshot, but it crashed again. > (full dmesg below) > > OpenBSD 5.7-current (GENERIC.MP) #824: Mon Apr 20 23:23:30 MDT 2015 > [email protected]:/usr/src/sys/arch/i386/compile/GENERIC.MP > cpu0: Intel(R) Xeon(R) CPU E3-1230 v3 @ 3.30GHz ("GenuineIntel" 686-class) > 3.30 GHz > .... > setting tty flags > pf enabled > ddb.console: 0 -> 1 > starting network > uvm_fault(0xd0b89480, 0xcf9df000, 0, 1) -> e > kernel: page fault trap, code=0 > Stopped at pmap_remove_ptes_86+0x72: movl 0(%edx),%eax > ddb{0}> > > > ddb{0}> trace > pmap_remove_ptes_86(daa25100,d45c4f30,cf9dfd60,77f58000,77f59000) at > pmap_remov > e_ptes_86+0x72 > pmap_do_remove_86(daa25100,77f58000,77f59000,0,daa2a2bc) at > pmap_do_remove_86+0 > xfc > pmap_remove(daa25100,77f58000,77f59000,d04fc9c9,d0ba7e60) at pmap_remove+0x28 > uvm_unmap_kill_entry(daa26120,daa0a580,f54c1f2c,d050bdcd,daa0a580) at > uvm_unmap > _kill_entry+0xf8 > uvm_map_teardown(daa26120,f54c1f14,2e770bc0,daa0b008,d03a23f0) at > uvm_map_teard > own+0xbc > uvmspace_free(daa26120,1,2e770bc0,f54c1f5c,d02032fa) at uvmspace_free+0x2e > uvm_exit(daa1c310,d0b23ac8,4,d09aac8e,0) at uvm_exit+0x15 > reaper(daa2270c) at reaper+0xd0 > > > ddb{0}> ps > PID PPID PGRP UID S FLAGS WAIT COMMAND > 30843 30854 30854 0 3 0x8b pause sh > 30854 1 30854 0 3 0x8b pause sh > 10796 0 0 0 3 0x14200 pgzero zerothread > 20524 0 0 0 3 0x14200 aiodoned aiodoned > 30711 0 0 0 3 0x14200 syncer update > 295 0 0 0 3 0x14200 cleaner cleaner > *18600 0 0 0 7 0x14200 reaper > 8467 0 0 0 3 0x14200 pgdaemon pagedaemon > 21165 0 0 0 3 0x14200 bored crypto > 22401 0 0 0 3 0x14200 pftm pfpurge > 21731 0 0 0 3 0x14200 usbtsk usbtask > 13690 0 0 0 3 0x14200 usbatsk usbatsk > 1565 0 0 0 3 0x14200 bored sensors > 11166 0 0 0 3 0x40014200 acpi0 acpi0 > 32510 0 0 0 7 0x40014200 idle3 > 7402 0 0 0 7 0x40014200 idle2 > 14316 0 0 0 7 0x40014200 idle1 > 28105 0 0 0 3 0x14200 bored softnet > 11715 0 0 0 3 0x14200 bored systqmp > 6918 0 0 0 3 0x14200 bored systq > 4056 0 0 0 3 0x40014200 idle0 > 24258 0 0 0 3 0x14200 kmalloc kmthread > 1 0 1 0 3 0x82 wait init > 0 -1 0 0 3 0x10200 scheduler swapper > > > ddb{0}> show registers > ds 0x10 > es 0x10 > fs 0x20 > gs 0 > edi 0x77f58000 > esi 0x77f58000 > Ebp 0xf54c1e2c > ebx 0x77f59000 > edx 0xcf9dfd60 PTmap+0x1dfd60 > ecx 0xdaa25100 end+0x9ddbe18 > eax 0xd45c4f30 end+0x397bc48 > eip 0xd0564ab2 pmap_remove_ptes_86+0x72 > cs 0x8 > eflags 0x10202 > esp 0xf54c1de4 > ss 0x10 > pmap_remove_ptes_86+0x72: movl 0(%edx),%eax > > > OpenBSD 5.7-current (GENERIC.MP) #824: Mon Apr 20 23:23:30 MDT 2015 > [email protected]:/usr/src/sys/arch/i386/compile/GENERIC.MP > cpu0: Intel(R) Xeon(R) CPU E3-1230 v3 @ 3.30GHz ("GenuineIntel" 686-class) > 3.30 GHz > cpu0: > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,PAGE1GB,LONG,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM > real mem = 3715575808 (3543MB) > avail mem = 3642568704 (3473MB) > mpath0 at root > scsibus0 at mpath0: 256 targets > mainbus0 at root > bios0 at mainbus0: date 04/13/12, SMBIOS rev. 2.7 @ 0xec090 (36 entries) > bios0: vendor American Megatrends Inc. version "1.1a" date 12/03/2013 > bios0: Supermicro X10SLH-F/X10SLM+-F > acpi0 at bios0: rev 2 > acpi0: sleep states S0 S3 S4 S5 > acpi0: tables DSDT FACP APIC FPDT LPIT SSDT SSDT SSDT SSDT MCFG PRAD HPET > SSDT SSDT SPMI DMAR EINJ ERST HEST BERT > acpi0: wakeup devices PXSX(S4) RP01(S4) PXSX(S4) RP02(S4) PXSX(S4) RP03(S4) > PXSX(S4) RP04(S4) PXSX(S4) RP05(S4) GLAN(S4) EHC1(S4) EHC2(S4) XHC_(S4) > HDEF(S4) PEG0(S4) [...] > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges > cpu0: apic clock running at 99MHz > cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4, IBE > cpu1 at mainbus0: apid 2 (application processor) > cpu1: Intel(R) Xeon(R) CPU E3-1230 v3 @ 3.30GHz ("GenuineIntel" 686-class) > 3.30 GHz > cpu1: > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,PAGE1GB,LONG,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM > cpu2 at mainbus0: apid 4 (application processor) > cpu2: Intel(R) Xeon(R) CPU E3-1230 v3 @ 3.30GHz ("GenuineIntel" 686-class) > 3.30 GHz > cpu2: > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,PAGE1GB,LONG,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM > cpu3 at mainbus0: apid 6 (application processor) > cpu3: Intel(R) Xeon(R) CPU E3-1230 v3 @ 3.30GHz ("GenuineIntel" 686-class) > 3.30 GHz > cpu3: > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,PAGE1GB,LONG,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM > ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins > acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63 > acpihpet0 at acpi0: 14318179 Hz > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus 1 (RP01) > acpiprt2 at acpi0: bus 3 (RP03) > acpiprt3 at acpi0: bus 4 (RP04) > acpiprt4 at acpi0: bus -1 (PEG0) > acpiprt5 at acpi0: bus -1 (PEG1) > acpiec0 at acpi0: not present > acpicpu0 at acpi0: C1, PSS > acpicpu1 at acpi0: C1, PSS > acpicpu2 at acpi0: C1, PSS > acpicpu3 at acpi0: C1, PSS > acpipwrres0 at acpi0: FN00, resource for FAN0 > acpipwrres1 at acpi0: FN01, resource for FAN1 > acpipwrres2 at acpi0: FN02, resource for FAN2 > acpipwrres3 at acpi0: FN03, resource for FAN3 > acpipwrres4 at acpi0: FN04, resource for FAN4 > acpitz0 at acpi0: critical temperature is 105 degC > acpitz1 at acpi0: critical temperature is 105 degC > acpibat0 at acpi0: BAT0 not present > acpibat1 at acpi0: BAT1 not present > acpibat2 at acpi0: BAT2 not present > acpibtn0 at acpi0: PWRB > acpibtn1 at acpi0: LID0 > acpivideo0 at acpi0: GFX0 > acpivout0 at acpivideo0: DD1F > bios0: ROM list: 0xc0000/0x8000 > ipmi at mainbus0 not configured > cpu0: Enhanced SpeedStep 3293 MHz: speeds: 3301, 3300, 3100, 2900, 2800, > 2600, 2400, 2200, 2000, 1900, 1700, 1500, 1300, 1200, 1000, 800 MHz > pci0 at mainbus0 bus 0: configuration mode 1 (no bios) > pchb0 at pci0 dev 0 function 0 "Intel Xeon E3-1200 v3 Host" rev 0x06 > xhci0 at pci0 dev 20 function 0 "Intel 8 Series xHCI" rev 0x05: msi > usb0 at xhci0: USB revision 3.0 > uhub0 at usb0 "Intel xHCI root hub" rev 3.00/1.00 addr 1 > "Intel 8 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured > "Intel 8 Series MEI" rev 0x04 at pci0 dev 22 function 1 not configured > ehci0 at pci0 dev 26 function 0 "Intel 8 Series USB" rev 0x05: apic 8 int 16 > usb1 at ehci0: USB revision 2.0 > uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > ppb0 at pci0 dev 28 function 0 "Intel 8 Series PCIE" rev 0xd5: apic 8 int 16 > pci1 at ppb0 bus 1 > ppb1 at pci1 dev 0 function 0 "ASPEED Technology AST1150 PCI" rev 0x03 > pci2 at ppb1 bus 2 > vga1 at pci2 dev 0 function 0 "ASPEED Technology AST2000" rev 0x30 > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > ppb2 at pci0 dev 28 function 2 "Intel 8 Series PCIE" rev 0xd5: apic 8 int 18 > pci3 at ppb2 bus 3 > em0 at pci3 dev 0 function 0 "Intel I210" rev 0x03: msi, address > 0c:c4:7a:00:c5:bc > ppb3 at pci0 dev 28 function 3 "Intel 8 Series PCIE" rev 0xd5: apic 8 int 19 > pci4 at ppb3 bus 4 > em1 at pci4 dev 0 function 0 "Intel I210" rev 0x03: msi, address > 0c:c4:7a:00:c5:bd > ehci1 at pci0 dev 29 function 0 "Intel 8 Series USB" rev 0x05: apic 8 int 23 > usb2 at ehci1: USB revision 2.0 > uhub2 at usb2 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > pcib0 at pci0 dev 31 function 0 "Intel C226 LPC" rev 0x05 > ahci0 at pci0 dev 31 function 2 "Intel 8 Series AHCI" rev 0x05: msi, AHCI 1.3 > ahci0: port 0: 6.0Gb/s > ahci0: port 1: 6.0Gb/s > ahci0: port 2: 1.5Gb/s > scsibus1 at ahci0: 32 targets > sd0 at scsibus1 targ 0 lun 0: <ATA, Samsung SSD 840, EXT0> SCSI3 0/direct > fixed naa.50025388a02d827c > sd0: 114473MB, 512 bytes/sector, 234441648 sectors, thin > sd1 at scsibus1 targ 1 lun 0: <ATA, Samsung SSD 840, EXT0> SCSI3 0/direct > fixed naa.50025388a02d827d > sd1: 114473MB, 512 bytes/sector, 234441648 sectors, thin > cd0 at scsibus1 targ 2 lun 0: <HL-DT-ST, DVDRAM GH22NS50, TN03> ATAPI 5/cdrom > removable > ichiic0 at pci0 dev 31 function 3 "Intel 8 Series SMBus" rev 0x05: apic 8 int > 18 > iic0 at ichiic0 > sdtemp0 at iic0 addr 0x19: at30ts00 > sdtemp1 at iic0 addr 0x1b: at30ts00 > spdmem0 at iic0 addr 0x51: 8GB DDR3 SDRAM ECC PC3-12800 with thermal sensor > spdmem1 at iic0 addr 0x53: 8GB DDR3 SDRAM ECC PC3-12800 with thermal sensor > "Intel 8 Series Thermal" rev 0x05 at pci0 dev 31 function 6 not configured > isa0 at pcib0 > isadma0 at isa0 > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > com0: console > com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo > com2 at isa0 port 0x3e8/8 irq 5: ns16550a, 16 byte fifo > pckbc0 at isa0 port 0x60/5 > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > wbsio0 at isa0 port 0x2e/2: NCT6776F rev 0x33 > lm1 at wbsio0 port 0xa30/8: NCT6776F > npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 > uhidev0 at uhub0 port 6 configuration 1 interface 0 "Cherry Mikroschalter > product 0x0023" rev 2.00/0.32 addr 2 > uhidev0: iclass 3/1 > ukbd0 at uhidev0: 8 variable keys, 6 key codes > wskbd0 at ukbd0: console keyboard, using wsdisplay0 > uhidev1 at uhub0 port 6 configuration 1 interface 1 "Cherry Mikroschalter > product 0x0023" rev 2.00/0.32 addr 2 > uhidev1: iclass 3/0, 2 report ids > uhid0 at uhidev1 reportid 1: input=2, output=0, feature=0 > uhid1 at uhidev1 reportid 2: input=1, output=0, feature=0 > uhub3 at uhub0 port 7 "vendor 0x0000 product 0x0001" rev 2.00/0.00 addr 3 > uhub3: device problem, disabling port 1 > uhub4 at uhub1 port 1 "Intel Rate Matching Hub" rev 2.00/0.05 addr 2 > uhub5 at uhub2 port 1 "Intel Rate Matching Hub" rev 2.00/0.05 addr 2 > vscsi0 at root > scsibus2 at vscsi0: 256 targets > softraid0 at root > scsibus3 at softraid0: 256 targets > root on sd1a (50a432f7580e264a.a) swap on sd1b dump on sd1b > > > -- > Mark Patruck ( mark at wrapped.cx ) > GPG key 0xF2865E51 / 187F F6D3 EE04 1DCE 1C74 F644 0D3C F66F F286 5E51 > > http://www.wrapped.cx >
