Hi there, I've been hitting a kernel crash on both OpenBSD 5.6 and 5.7.
See below for the dmesg + a picture[0] of the crash. There was no ddb prompt so there is little information there. For the details on the OpenBSD 5.6 crash (managed to drop into ddb there) see http://marc.info/?t=142865745800005&r=1&w=2. The two issues may be unrelated. I should mention that I can only trigger this crash once every day or two and only if I am running bgpd. [0] http://cream.2f30.org/sin/5.7-crash.png OpenBSD 5.7 (GENERIC) #0: Thu Apr 30 22:01:01 CEST 2015 [email protected]:/binpatchng/work-binpatch57-amd64/src/sys/arch/amd64/compile/GENERIC real mem = 1056956416 (1007MB) avail mem = 1024995328 (977MB) mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf1630 (10 entries) bios0: vendor Bochs version "Bochs" date 01/01/2011 bios0: Bochs Bochs acpi0 at bios0: rev 0 acpi0: sleep states S3 S4 S5 acpi0: tables DSDT FACP SSDT APIC HPET acpi0: wakeup devices acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Westmere E56xx/L56xx/X56xx (Nehalem-C), 2200.28 MHz cpu0: FPU,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SSE3,PCLMUL,SSSE3,CX16,SSE4.1,SSE4.2,POPCNT,AES,HV,NXE,LONG,LAHF cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line 16-way L2 cache cpu0: ITLB 255 4KB entries direct-mapped, 255 4MB entries direct-mapped cpu0: DTLB 255 4KB entries direct-mapped, 255 4MB entries direct-mapped cpu0: smt 0, core 0, package 0 mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges cpu0: apic clock running at 1000MHz ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 11, 24 pins acpihpet0 at acpi0: 100000000 Hz acpiprt0 at acpi0: bus 0 (PCI0) acpicpu0 at acpi0 pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "Intel 82441FX" rev 0x02 pcib0 at pci0 dev 1 function 0 "Intel 82371SB ISA" rev 0x00 pciide0 at pci0 dev 1 function 1 "Intel 82371SB IDE" rev 0x00: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility pciide0: channel 0 disabled (no drives) pciide0: channel 1 disabled (no drives) uhci0 at pci0 dev 1 function 2 "Intel 82371SB USB" rev 0x01: apic 0 int 11 piixpm0 at pci0 dev 1 function 3 "Intel 82371AB Power" rev 0x03: apic 0 int 9 iic0 at piixpm0 vga1 at pci0 dev 2 function 0 "Bochs VGA" rev 0x00 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) virtio0 at pci0 dev 3 function 0 "Qumranet Virtio Network" rev 0x00: Virtio Network Device vio0 at virtio0: address 52:54:00:9e:a7:a1 virtio0: apic 0 int 11 eap0 at pci0 dev 4 function 0 "Ensoniq AudioPCI" rev 0x00: apic 0 int 11 audio0 at eap0 midi0 at eap0: <AudioPCI MIDI UART> virtio1 at pci0 dev 5 function 0 "Qumranet Virtio Storage" rev 0x00: Virtio Block Device vioblk0 at virtio1 scsibus1 at vioblk0: 2 targets sd0 at scsibus1 targ 0 lun 0: <VirtIO, Block Device, > SCSI3 0/direct fixed sd0: 51200MB, 512 bytes/sector, 104857600 sectors virtio1: apic 0 int 10 virtio2 at pci0 dev 6 function 0 "Qumranet Virtio Memory" rev 0x00: Virtio Memory Balloon Device viomb0 at virtio2 virtio2: apic 0 int 10 isa0 at pcib0 isadma0 at isa0 fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 fd0 at fdc0 drive 1: density unknown pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 usb0 at uhci0: USB revision 1.0 uhub0 at usb0 "Intel UHCI root hub" rev 1.00/1.00 addr 1 nvram: invalid checksum uhidev0 at uhub0 port 1 configuration 1 interface 0 "QEMU QEMU USB Tablet" rev 1.00/0.00 addr 2 uhidev0: iclass 3/0 ums0 at uhidev0: 3 buttons, Z dir wsmouse1 at ums0 mux 0 vscsi0 at root scsibus2 at vscsi0: 256 targets softraid0 at root scsibus3 at softraid0: 256 targets root on sd0a (ef8d91257e8b7a44.a) swap on sd0b dump on sd0b WARNING: / was not properly unmounted clock: unknown CMOS layout nd6_setmtu0: new link MTU on tun1 (1130) is too small for IPv6
