Hi, i'm trying to install OpenBSD-current (i386) on a Targa Now NT9231.
When booting from install58.fs usb stick, only the message "Using drive 0, partition 0," is printed continously onto the screen (rigth after the BIOS prompt). The installation via pxeboot was successfull but trying to boot from disk (wd0) doesn't work and the message "Using drive 0, partition 0." appears again. Booting via pxeboot (boot hd0a:/bsd) works but i had to disable sisagp. sisagp hint found here: http://marc.info/?l=openbsd-bugs&m=128285514318212&w=2 The installed BIOS is quite old but i couldn't find an update. Does anybody knows a possible solution to this problem? Cheers, Fabian dmesg: ------------ OpenBSD 5.8-beta (GENERIC.MP) #982: Thu Jun 25 21:39:05 MDT 2015 [email protected]:/usr/src/sys/arch/i386/compile/GENERIC.MP cpu0: Intel(R) Atom(TM) CPU 230 @ 1.60GHz ("GenuineIntel" 686-class) 1.60 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,DTES64,MWAIT,DS-CPL,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,LAHF,PERF,SENSOR real mem = 938819584 (895MB) avail mem = 911147008 (868MB) mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: date 06/29/09, BIOS32 rev. 0 @ 0xf0010, SMBIOS rev. 2.5 @ 0xfb7e0 (28 entries) bios0: vendor American Megatrends Inc. version "0003" date 06/29/2009 acpi0 at bios0: rev 2 acpi0: sleep states S0 S1 S4 S5 acpi0: tables DSDT FACP APIC MCFG SLIC WDRT OEMB HPET acpi0: wakeup devices PCI0(S4) PS2K(S4) PS2M(S4) MAC_(S4) HDA_(S4) S184(S4) P0P7(S4) NPCE(S4) USB_(S1) USB2(S1) EUSB(S1) P0P6(S4) PWRB(S4) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges cpu0: apic clock running at 133MHz cpu0: mwait min=64, max=64, C-substates=0.1, IBE cpu1 at mainbus0: apid 1 (application processor) cpu1: Intel(R) Atom(TM) CPU 230 @ 1.60GHz ("GenuineIntel" 686-class) 1.60 GHz cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,DTES64,MWAIT,DS-CPL,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,LAHF,PERF,SENSOR ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 14, 24 pins ioapic0: misconfigured as apic 1, remapped to apid 2 acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255 acpihpet0 at acpi0: 14318179 Hz acpiprt0 at acpi0: bus 0 (PCI0) acpicpu0 at acpi0 acpicpu1 at acpi0 acpibtn0 at acpi0: PWRB acpivideo0 at acpi0: VGA_ bios0: ROM list: 0xc0000/0x10000 0xd0000/0x1800 pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at pci0 dev 0 function 0 "SiS 671 PCI" rev 0x00 agp at pchb0 not configured ppb0 at pci0 dev 1 function 0 "SiS 648FX AGP" rev 0x00 pci1 at ppb0 bus 1 vga1 at pci1 dev 0 function 0 vendor "SiS", unknown product 0x6351 rev 0x10 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) pcib0 at pci0 dev 2 function 0 "SiS 968 ISA" rev 0x01 pciide0 at pci0 dev 2 function 5 "SiS 5513 EIDE" rev 0x01: 968: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility pciide0: channel 0 disabled (no drives) pciide0: channel 1 ignored (disabled) ohci0 at pci0 dev 3 function 0 "SiS 5597/5598 USB" rev 0x0f: apic 2 int 20, version 1.0, legacy support ohci1 at pci0 dev 3 function 1 "SiS 5597/5598 USB" rev 0x0f: apic 2 int 21, version 1.0, legacy support ehci0 at pci0 dev 3 function 3 "SiS 7002 USB" rev 0x00: apic 2 int 22 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "SiS EHCI root hub" rev 2.00/1.00 addr 1 pciide1 at pci0 dev 5 function 0 "SiS 1183 SATA" rev 0x03: DMA pciide1: using apic 2 int 17 for native-PCI interrupt wd0 at pciide1 channel 0 drive 0: <SAMSUNG HM160HI> wd0: 16-sector PIO, LBA48, 152627MB, 312581808 sectors wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 6 ppb1 at pci0 dev 6 function 0 "SiS PCI-PCI" rev 0x00 pci2 at ppb1 bus 2 re0 at pci2 dev 0 function 0 "Realtek 8168" rev 0x03: RTL8168D/8111D (0x2800), apic 2 int 16, address 00:26:18:85:2f:54 rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 2 ppb2 at pci0 dev 31 function 0 "SiS PCI-PCI" rev 0x00 pci3 at ppb2 bus 3 isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 irq 1 irq 12 pckbd0 at pckbc0 (kbd slot) wskbd0 at pckbd0: console keyboard, using wsdisplay0 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 usb1 at ohci0: USB revision 1.0 uhub1 at usb1 "SiS OHCI root hub" rev 1.00/1.00 addr 1 usb2 at ohci1: USB revision 1.0 uhub2 at usb2 "SiS OHCI root hub" rev 1.00/1.00 addr 1 uhidev0 at uhub1 port 2 configuration 1 interface 0 "Holtek USB Keyboard" rev 1.10/3.90 addr 2 uhidev0: iclass 3/1 ukbd0 at uhidev0: 64 variable keys, 0 key codes wskbd1 at ukbd0 mux 1 wskbd1: connecting to wsdisplay0 uhidev1 at uhub1 port 2 configuration 1 interface 1 "Holtek USB Keyboard" rev 1.10/3.90 addr 2 uhidev1: iclass 3/0, 3 report ids uhid0 at uhidev1 reportid 1: input=2, output=0, feature=0 uhid1 at uhidev1 reportid 2: input=1, output=0, feature=0 ukbd1 at uhidev1 reportid 3: 56 variable keys, 0 key codes wskbd2 at ukbd1 mux 1 wskbd2: connecting to wsdisplay0 vscsi0 at root scsibus1 at vscsi0: 256 targets softraid0 at root scsibus2 at softraid0: 256 targets root on wd0a (00729be957726f07.a) swap on wd0b dump on wd0b
