On 30/06/15(Tue) 07:43, Ingo Feinerer wrote: > >Synopsis: Sound regression: uaudio_chan_rintr: count < n > >Category: kernel > >Environment: > System : OpenBSD 5.8 > Details : OpenBSD 5.8-beta (GENERIC.MP) #1107: Fri Jun 26 10:12:53 > MDT 2015 > > dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP > > Architecture: OpenBSD.amd64 > Machine : amd64 > >Description: > Playing a sound file no longer works. E.g.,
Could you try a newer snapshot? If it's not fixed please report back! > > aucat -i /usr/local/share/baresip/message.wav > > plays a distorted sound/noise and spams the system console: > > uaudio_chan_rintr: count < n > uaudio_chan_rintr: transfer count - frame total = 88 > uaudio_chan_rintr: count < n > uaudio_chan_rintr: count < n > uaudio_chan_rintr: transfer count - frame total = 16 > uaudio_chan_rintr: count < n > uaudio_chan_rintr: count < n > > The relevant device is a Logitech headset which worked fine with the previous > snapshots. > > uaudio0 at uhub6 port 1 configuration 1 interface 0 "Logitech Inc. Logitech > USB Headset H340" rev 2.00/1.13 addr 2 > uaudio0: audio rev 1.00, 5 mixer controls > audio0 at uaudio0 > uhidev2 at uhub6 port 1 configuration 1 interface 3 "Logitech Inc. Logitech > USB Headset H340" rev 2.00/1.13 addr 2 > uhidev2: iclass 3/0, 9 report ids > uhid0 at uhidev2 reportid 1: input=1, output=0, feature=0 > uhid1 at uhidev2 reportid 2: input=2, output=1, feature=0 > uhid2 at uhidev2 reportid 8: input=0, output=5, feature=0 > uhid3 at uhidev2 reportid 9: input=2, output=0, feature=0 > > Controller /dev/usb6: > addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), > Intel(0x8086), rev 1.00 > port 1 addr 2: full speed, power 120 mA, config 1, Logitech USB Headset > H340(0x0a38), Logitech Inc.(0x046d), rev 1.13 > > Output of mixerctl (if that is of any use): > > outputs.spkr.mute=off > outputs.spkr=191,191 > record.mic.mute=off > record.mic=210 > record.sel10-i6=1 > >How-To-Repeat: > Attach headset, play the WAV file with "aucat -i" > >Fix: > > > dmesg: > OpenBSD 5.8-beta (GENERIC.MP) #1107: Fri Jun 26 10:12:53 MDT 2015 > dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP > RTC BIOS diagnostic error 80<clock_battery> > real mem = 8495140864 (8101MB) > avail mem = 8233811968 (7852MB) > mpath0 at root > scsibus0 at mpath0: 256 targets > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xe3400 (39 entries) > bios0: vendor Intel Corp. version "MQ96510J.86A.1754.2008.1117.0002" date > 11/17/2008 > bios0: Intel Corporation DG965WH > acpi0 at bios0: rev 0 > acpi0: sleep states S0 S3 S4 S5 > acpi0: tables DSDT FACP APIC WDDT MCFG ASF! HPET SSDT SSDT SSDT SSDT SSDT > acpi0: wakeup devices SLPB(S4) P32_(S4) UAR1(S4) UAR2(S4) ILAN(S4) PEGP(S4) > PEX0(S4) PEX1(S4) PEX2(S4) PEX3(S4) PEX4(S4) PEX5(S4) UHC1(S3) UHC2(S3) > UHC3(S3) UHC4(S3) [...] > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz, 2397.93 MHz > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,NXE,LONG,LAHF,PERF,SENSOR > cpu0: 4MB 64b/line 16-way L2 cache > cpu0: smt 0, core 0, package 0 > mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges > cpu0: apic clock running at 266MHz > cpu0: mwait min=64, max=64, C-substates=0.2, IBE > cpu1 at mainbus0: apid 1 (application processor) > cpu1: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz, 2397.61 MHz > cpu1: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,NXE,LONG,LAHF,PERF,SENSOR > cpu1: 4MB 64b/line 16-way L2 cache > cpu1: smt 0, core 1, package 0 > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins > ioapic0: misconfigured as apic 0, remapped to apid 2 > acpimcfg0 at acpi0 addr 0xf0000000, bus 0-127 > acpihpet0 at acpi0: 14318179 Hz > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus 6 (P32_) > acpiprt2 at acpi0: bus 1 (PEX0) > acpiprt3 at acpi0: bus 2 (PEX1) > acpiprt4 at acpi0: bus 3 (PEX2) > acpiprt5 at acpi0: bus 4 (PEX3) > acpiprt6 at acpi0: bus 5 (PEX4) > acpiprt7 at acpi0: bus -1 (PEX5) > acpicpu0 at acpi0: PSS > acpicpu1 at acpi0: PSS > acpibtn0 at acpi0: SLPB > cpu0: Enhanced SpeedStep 2397 MHz: speeds: 2394, 1596 MHz > pci0 at mainbus0 bus 0 > pchb0 at pci0 dev 0 function 0 "Intel 82G965 Host" rev 0x02 > vga1 at pci0 dev 2 function 0 "Intel 82G965 Video" rev 0x02 > intagp0 at vga1 > agp0 at intagp0: aperture at 0xd0000000, size 0x10000000 > inteldrm0 at vga1 > drm0 at inteldrm0 > inteldrm0: 1920x1080 > wsdisplay0 at vga1 mux 1: console (std, vt100 emulation) > wsdisplay0: screen 1-5 added (std, vt100 emulation) > "Intel 82G965 HECI" rev 0x02 at pci0 dev 3 function 0 not configured > uhci0 at pci0 dev 26 function 0 "Intel 82801H USB" rev 0x02: apic 2 int 16 > uhci1 at pci0 dev 26 function 1 "Intel 82801H USB" rev 0x02: apic 2 int 21 > ehci0 at pci0 dev 26 function 7 "Intel 82801H USB" rev 0x02: apic 2 int 18 > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > ppb0 at pci0 dev 28 function 0 "Intel 82801H PCIE" rev 0x02: msi > pci1 at ppb0 bus 1 > ppb1 at pci0 dev 28 function 1 "Intel 82801H PCIE" rev 0x02: msi > pci2 at ppb1 bus 2 > pciide0 at pci2 dev 0 function 0 "Marvell 88SE6101 IDE" rev 0xb1: DMA > (unsupported), channel 0 configured to native-PCI, channel 1 configured to > native-PCI > pciide0: using apic 2 int 17 for native-PCI interrupt > pciide0: channel 0 ignored (not responding; disabled or no drives?) > pciide0: channel 1 ignored (not responding; disabled or no drives?) > ppb2 at pci0 dev 28 function 2 "Intel 82801H PCIE" rev 0x02: msi > pci3 at ppb2 bus 3 > ppb3 at pci0 dev 28 function 3 "Intel 82801H PCIE" rev 0x02: msi > pci4 at ppb3 bus 4 > ppb4 at pci0 dev 28 function 4 "Intel 82801H PCIE" rev 0x02: msi > pci5 at ppb4 bus 5 > uhci2 at pci0 dev 29 function 0 "Intel 82801H USB" rev 0x02: apic 2 int 23 > uhci3 at pci0 dev 29 function 1 "Intel 82801H USB" rev 0x02: apic 2 int 19 > uhci4 at pci0 dev 29 function 2 "Intel 82801H USB" rev 0x02: apic 2 int 18 > ehci1 at pci0 dev 29 function 7 "Intel 82801H USB" rev 0x02: apic 2 int 23 > usb1 at ehci1: USB revision 2.0 > uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > ppb5 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xf2 > pci6 at ppb5 bus 6 > rl0 at pci6 dev 0 function 0 "Realtek 8139" rev 0x10: apic 2 int 21, address > 00:02:44:11:a2:bb > rlphy0 at rl0 phy 0: RTL internal PHY > pcib0 at pci0 dev 31 function 0 "Intel 82801HH LPC" rev 0x02 > ahci0 at pci0 dev 31 function 2 "Intel 82801H AHCI" rev 0x02: msi, AHCI 1.1 > ahci0: port 0: 1.5Gb/s > ahci0: port 1: 3.0Gb/s > scsibus1 at ahci0: 32 targets > sd0 at scsibus1 targ 0 lun 0: <ATA, HDS728080PLA380, PF2O> SCSI3 0/direct > fixed naa.5000cca30ec825ca > sd0: 78533MB, 512 bytes/sector, 160836480 sectors > sd1 at scsibus1 targ 1 lun 0: <ATA, ST3160815AS, 4.AA> SCSI3 0/direct fixed > t10.ATA_ST3160815AS_9RXGWLJR > sd1: 152627MB, 512 bytes/sector, 312581808 sectors > ichiic0 at pci0 dev 31 function 3 "Intel 82801H SMBus" rev 0x02: apic 2 int 21 > iic0 at ichiic0 > spdmem0 at iic0 addr 0x50: 2GB DDR2 SDRAM non-parity PC2-6400CL5 > spdmem1 at iic0 addr 0x51: 2GB DDR2 SDRAM non-parity PC2-6400CL5 > spdmem2 at iic0 addr 0x52: 2GB DDR2 SDRAM non-parity PC2-6400CL5 > spdmem3 at iic0 addr 0x53: 2GB DDR2 SDRAM non-parity PC2-6400CL5 > usb2 at uhci0: USB revision 1.0 > uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb3 at uhci1: USB revision 1.0 > uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb4 at uhci2: USB revision 1.0 > uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb5 at uhci3: USB revision 1.0 > uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb6 at uhci4: USB revision 1.0 > uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > isa0 at pcib0 > isadma0 at isa0 > pckbc0 at isa0 port 0x60/5 irq 1 irq 12 > pckbd0 at pckbc0 (kbd slot) > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > uhidev0 at uhub4 port 1 configuration 1 interface 0 "Dell Dell USB Optical > Mouse" rev 2.00/43.01 addr 2 > uhidev0: iclass 3/1 > ums0 at uhidev0: 3 buttons, Z dir > wsmouse0 at ums0 mux 0 > uhidev1 at uhub5 port 2 configuration 1 interface 0 "Dell Dell USB Keyboard" > rev 1.10/2.00 addr 2 > uhidev1: iclass 3/1 > ukbd0 at uhidev1: 8 variable keys, 6 key codes > wskbd1 at ukbd0 mux 1 > wskbd1: connecting to wsdisplay0 > vscsi0 at root > scsibus2 at vscsi0: 256 targets > softraid0 at root > scsibus3 at softraid0: 256 targets > root on sd0a (61628b08b6b1e09c.a) swap on sd0b dump on sd0b > uaudio0 at uhub6 port 1 configuration 1 interface 0 "Logitech Inc. Logitech > USB Headset H340" rev 2.00/1.13 addr 2 > uaudio0: audio rev 1.00, 5 mixer controls > audio0 at uaudio0 > uhidev2 at uhub6 port 1 configuration 1 interface 3 "Logitech Inc. Logitech > USB Headset H340" rev 2.00/1.13 addr 2 > uhidev2: iclass 3/0, 9 report ids > uhid0 at uhidev2 reportid 1: input=1, output=0, feature=0 > uhid1 at uhidev2 reportid 2: input=2, output=1, feature=0 > uhid2 at uhidev2 reportid 8: input=0, output=5, feature=0 > uhid3 at uhidev2 reportid 9: input=2, output=0, feature=0 > > usbdevs: > Controller /dev/usb0: > addr 1: high speed, self powered, config 1, EHCI root hub(0x0000), > Intel(0x8086), rev 1.00 > port 1 powered > port 2 powered > port 3 powered > port 4 powered > Controller /dev/usb1: > addr 1: high speed, self powered, config 1, EHCI root hub(0x0000), > Intel(0x8086), rev 1.00 > port 1 powered > port 2 powered > port 3 powered > port 4 powered > port 5 powered > port 6 powered > Controller /dev/usb2: > addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), > Intel(0x8086), rev 1.00 > port 1 powered > port 2 powered > Controller /dev/usb3: > addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), > Intel(0x8086), rev 1.00 > port 1 powered > port 2 powered > Controller /dev/usb4: > addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), > Intel(0x8086), rev 1.00 > port 1 addr 2: low speed, power 100 mA, config 1, Dell USB Optical > Mouse(0x3012), Dell(0x413c), rev 43.01 > port 2 powered > Controller /dev/usb5: > addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), > Intel(0x8086), rev 1.00 > port 1 powered > port 2 addr 2: low speed, power 70 mA, config 1, Dell USB Keyboard(0x2003), > Dell(0x413c), rev 2.00 > Controller /dev/usb6: > addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), > Intel(0x8086), rev 1.00 > port 1 addr 2: full speed, power 120 mA, config 1, Logitech USB Headset > H340(0x0a38), Logitech Inc.(0x046d), rev 1.13 > port 2 powered >
