Hi,
I've upgraded to the latest snapshot today but X doesn't
start. See the dmesg and Xorg.0.log below.
I am currently rebuilding Xenocara from source in case
this has already been fixed.
Cheers,
Dimitris
OpenBSD 5.8-current (GENERIC.MP) #1252: Fri Aug 21 19:45:34 MDT 2015
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 8451125248 (8059MB)
avail mem = 8191111168 (7811MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xdae9c000 (63 entries)
bios0: vendor LENOVO version "83ET76WW (1.46 )" date 07/05/2013
bios0: LENOVO 4236MBG
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SLIC SSDT SSDT SSDT HPET APIC MCFG ECDT ASF! TCPA SSDT
SSDT DMAR UEFI UEFI UEFI
acpi0: wakeup devices LID_(S3) SLPB(S3) IGBE(S4) EXP4(S4) EHC1(S3) EHC2(S3)
HDEF(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i5-2540M CPU @ 2.60GHz, 2591.94 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.1.2, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM) i5-2540M CPU @ 2.60GHz, 2591.59 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 1, core 0, package 0
cpu2 at mainbus0: apid 2 (application processor)
cpu2: Intel(R) Core(TM) i5-2540M CPU @ 2.60GHz, 2591.59 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 0, core 1, package 0
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM) i5-2540M CPU @ 2.60GHz, 2591.59 MHz
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 1, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
acpiec0 at acpi0
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG_)
acpiprt2 at acpi0: bus 2 (EXP1)
acpiprt3 at acpi0: bus 3 (EXP2)
acpiprt4 at acpi0: bus -1 (EXP4)
acpiprt5 at acpi0: bus 13 (EXP5)
acpicpu0 at acpi0: C3(350@104 io@0x415), C1(1000@1 halt), PSS
acpicpu1 at acpi0: C3(350@104 io@0x415), C1(1000@1 halt), PSS
acpicpu2 at acpi0: C3(350@104 io@0x415), C1(1000@1 halt), PSS
acpicpu3 at acpi0: C3(350@104 io@0x415), C1(1000@1 halt), PSS
acpipwrres0 at acpi0: PUBS, resource for EHC1, EHC2
acpitz0 at acpi0: critical temperature is 98 degC
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
acpibat0 at acpi0: BAT0 model "45N1173" serial 26283 type LION oem "SANYO"
acpibat1 at acpi0: BAT1 not present
acpiac0 at acpi0: AC unit online
acpithinkpad0 at acpi0
cpu0: Enhanced SpeedStep 2591 MHz: speeds: 2601, 2600, 2400, 2200, 2000, 1800,
1600, 1400, 1200, 1000, 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 2G Host" rev 0x09
vga1 at pci0 dev 2 function 0 "Intel HD Graphics 3000" rev 0x09
intagp at vga1 not configured
inteldrm0 at vga1
drm0 at inteldrm0
inteldrm0: 1600x900
wsdisplay0 at vga1 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
"Intel 6 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
puc0 at pci0 dev 22 function 3 "Intel 6 Series KT" rev 0x04: ports: 1 com
com4 at puc0 port 0 apic 2 int 19: ns16550a, 16 byte fifo
com4: probed fifo depth: 0 bytes
em0 at pci0 dev 25 function 0 "Intel 82579LM" rev 0x04: msi, address
00:21:cc:5d:e1:40
ehci0 at pci0 dev 26 function 0 "Intel 6 Series USB" rev 0x04: apic 2 int 16
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 6 Series HD Audio" rev 0x04: msi
azalia0: codecs: Conexant/0x506e, Intel/0x2805, using Conexant/0x506e
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 6 Series PCIE" rev 0xb4: msi
pci1 at ppb0 bus 2
ppb1 at pci0 dev 28 function 1 "Intel 6 Series PCIE" rev 0xb4: msi
pci2 at ppb1 bus 3
iwn0 at pci2 dev 0 function 0 "Intel Centrino Advanced-N 6205" rev 0x34: msi,
MIMO 2T2R, MoW, address a0:88:b4:48:4d:a4
ppb2 at pci0 dev 28 function 4 "Intel 6 Series PCIE" rev 0xb4: msi
pci3 at ppb2 bus 13
sdhc0 at pci3 dev 0 function 0 "Ricoh 5U822 SD/MMC" rev 0x08: apic 2 int 16
sdmmc0 at sdhc0
ehci1 at pci0 dev 29 function 0 "Intel 6 Series USB" rev 0x04: apic 2 int 23
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
pcib0 at pci0 dev 31 function 0 "Intel QM67 LPC" rev 0x04
ahci0 at pci0 dev 31 function 2 "Intel 6 Series AHCI" rev 0x04: msi, AHCI 1.3
ahci0: port 0: 6.0Gb/s
ahci0: port 1: 1.5Gb/s
ahci0: port 2: 3.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, Samsung SSD 840, DXM0> SCSI3 0/direct fixed
naa.500253855023d9dd
sd0: 244198MB, 512 bytes/sector, 500118192 sectors, thin
cd0 at scsibus1 targ 1 lun 0: <HL-DT-ST, DVDRAM GT33N, LT20> ATAPI 5/cdrom
removable
sd1 at scsibus1 targ 2 lun 0: <ATA, Crucial_CT120M50, MU03> SCSI3 0/direct
fixed naa.500a07510c08f0b5
sd1: 114473MB, 512 bytes/sector, 234441648 sectors, thin
ichiic0 at pci0 dev 31 function 3 "Intel 6 Series SMBus" rev 0x04: apic 2 int 18
iic0 at ichiic0
spdmem0 at iic0 addr 0x51: 8GB DDR3 SDRAM PC3-12800 SO-DIMM
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
wsmouse1 at pms0 mux 0
pms0: Synaptics touchpad, firmware 7.2
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
aps0 at isa0 port 0x1600/31
uhub2 at uhub0 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
uvideo0 at uhub2 port 6 configuration 1 interface 0 "Chicony Electronics Co.,
Ltd. Integrated Camera" rev 2.00/7.52 addr 3
video0 at uvideo0
uhub3 at uhub1 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd1a (0044cbc977433cca.a) swap on sd1b dump on sd1b
[ 266.161] (WW) checkDevMem: failed to open /dev/xf86 and /dev/mem
(Operation not permitted)
Check that you have set 'machdep.allowaperture=1'
in /etc/sysctl.conf and reboot your machine
refer to xf86(4) for details
[ 266.161] linear framebuffer access unavailable
[ 266.179] (--) Using wscons driver on /dev/ttyC4 in pcvt compatibility mode
(version 3.32)
[ 266.216]
X.Org X Server 1.16.4
Release Date: 2014-12-20
[ 266.217] X Protocol Version 11, Revision 0
[ 266.217] Build Operating System: OpenBSD 5.8 amd64
[ 266.217] Current Operating System: OpenBSD luna.2f30.org 5.8
GENERIC.MP#1252 amd64
[ 266.217] Build Date: 21 August 2015 08:28:22PM
[ 266.217]
[ 266.217] Current version of pixman: 0.32.6
[ 266.217] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 266.217] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 266.217] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Aug 23 11:06:06
2015
[ 266.217] (==) Using system config directory
"/usr/X11R6/share/X11/xorg.conf.d"
[ 266.218] (==) No Layout section. Using the first Screen section.
[ 266.218] (==) No screen section available. Using defaults.
[ 266.218] (**) |-->Screen "Default Screen Section" (0)
[ 266.218] (**) | |-->Monitor "<default monitor>"
[ 266.218] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 266.218] (==) Disabling SIGIO handlers for input devices
[ 266.218] (==) Automatically adding devices
[ 266.218] (==) Automatically enabling devices
[ 266.218] (==) Not automatically adding GPU devices
[ 266.218] (==) FontPath set to:
/usr/X11R6/lib/X11/fonts/misc/,
/usr/X11R6/lib/X11/fonts/TTF/,
/usr/X11R6/lib/X11/fonts/OTF/,
/usr/X11R6/lib/X11/fonts/Type1/,
/usr/X11R6/lib/X11/fonts/100dpi/,
/usr/X11R6/lib/X11/fonts/75dpi/
[ 266.218] (==) ModulePath set to "/usr/X11R6/lib/modules"
[ 266.218] (II) The server relies on wscons to provide the list of input
devices.
If no devices become available, reconfigure wscons or disable
AutoAddDevices.
[ 266.218] (II) Loader magic: 0xc84f9535640
[ 266.218] (II) Module ABI versions:
[ 266.218] X.Org ANSI C Emulation: 0.4
[ 266.218] X.Org Video Driver: 18.0
[ 266.218] X.Org XInput driver : 21.0
[ 266.218] X.Org Server Extension : 8.0
[ 266.218] (--) PCI:*(0:0:2:0) 8086:0126:17aa:21ce rev 9, Mem @
0xf0000000/4194304, 0xe0000000/268435456, I/O @ 0x00004000/64
[ 266.218] (II) LoadModule: "glx"
[ 266.219] (II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
[ 266.225] (II) Module glx: vendor="X.Org Foundation"
[ 266.225] compiled for 1.16.4, module version = 1.0.0
[ 266.225] ABI class: X.Org Server Extension, version 8.0
[ 266.225] (==) AIGLX enabled
[ 266.225] (==) Matched intel as autoconfigured driver 0
[ 266.225] (==) Matched vesa as autoconfigured driver 1
[ 266.225] (==) Assigned the driver to the xf86ConfigLayout
[ 266.225] (II) LoadModule: "intel"
[ 266.225] (II) Loading /usr/X11R6/lib/modules/drivers/intel_drv.so
[ 266.226] (EE) Failed to load /usr/X11R6/lib/modules/drivers/intel_drv.so:
Cannot load specified object
[ 266.226] (II) UnloadModule: "intel"
[ 266.226] (II) Unloading intel
[ 266.226] (EE) Failed to load module "intel" (loader failed, 7)
[ 266.226] (II) LoadModule: "vesa"
[ 266.226] (II) Loading /usr/X11R6/lib/modules/drivers/vesa_drv.so
[ 266.227] (II) Module vesa: vendor="X.Org Foundation"
[ 266.227] compiled for 1.16.4, module version = 2.3.3
[ 266.227] Module class: X.Org Video Driver
[ 266.227] ABI class: X.Org Video Driver, version 18.0
[ 266.227] (II) VESA: driver for VESA chipsets: vesa
[ 266.227] (II) Loading sub module "vbe"
[ 266.227] (II) LoadModule: "vbe"
[ 266.228] (II) Loading /usr/X11R6/lib/modules/libvbe.so
[ 266.228] (II) Module vbe: vendor="X.Org Foundation"
[ 266.228] compiled for 1.16.4, module version = 1.1.0
[ 266.228] ABI class: X.Org Video Driver, version 18.0
[ 266.228] (II) Loading sub module "int10"
[ 266.228] (II) LoadModule: "int10"
[ 266.228] (II) Loading /usr/X11R6/lib/modules/libint10.so
[ 266.228] (II) Module int10: vendor="X.Org Foundation"
[ 266.228] compiled for 1.16.4, module version = 1.0.0
[ 266.228] ABI class: X.Org Video Driver, version 18.0
[ 266.228] (II) VESA(0): initializing int10
[ 266.228] (EE) VESA(0): Cannot read int vect
[ 266.229] (II) UnloadModule: "vesa"
[ 266.229] (II) UnloadSubModule: "int10"
[ 266.229] (II) Unloading int10
[ 266.229] (II) UnloadSubModule: "vbe"
[ 266.229] (II) Unloading vbe
[ 266.229] (EE) Screen(s) found, but none have a usable configuration.
[ 266.229] (EE)
Fatal server error:
[ 266.229] (EE) no screens found(EE)
[ 266.229] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 266.229] (EE) Please also check the log file at "/var/log/Xorg.0.log" for
additional information.
[ 266.229] (EE)
[ 266.229] (EE) Server terminated with error (1). Closing log file.
