On 23/08/15(Sun) 13:09, Atanas Vladimirov wrote: > On 21.08.2015 22:41, Atanas Vladimirov wrote: > >On 20.08.2015 00:25, [email protected] wrote: > >>>Synopsis: USB 3.0 "Renesas uPD720201 xHCI" xhci0: reset timeout, > >>>xhci0: init failed, error=5 > >>>Category: system > >>>Environment: > >> System : OpenBSD 5.8 > >> Details : OpenBSD 5.8-current (GENERIC.MP) #1241: Wed Aug 19 > >>09:17:22 MDT 2015 > >> > >> [email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP > >> > >> Architecture: OpenBSD.amd64 > >> Machine : amd64 > >>>Description: > >> I moved my home server to Supermicro X9SBAA-F (Power down, took away > >>my old motherboard, > >> put the new one, Power up! OpenBSD - Thank you!) and none of the two > >>usb ports are not working. > >> I tried with few flash drives and two USB-TO-SERIAL (pl and ftdi). > >>>How-To-Repeat: > >> Install -current on Supermicro X9SBAA-F > >>>Fix: > >> I don't know. > > I made a change in BIOS (configured COM2 SOL redirect - enable/disable) and > after boot > xhci0 is working. FTDI FT232R USB UART works as it should. > After a reboot not working again - xHCI" xhci0: reset timeout, xhci0: init > failed, error=5 > > dmesg when xhci0 is working:
Could you provide a dmesg when it's not working?
