On 2015/11/01 20:05, Gregor Best wrote: > Hi people, > > I just upgraded one of my routers to todays snapshot and I'm seeing > > em0: watchdog timeout -- resetting > > in the dmesg. How can I debug this properly? Full dmesg and the output > of ifconfig are below the signature.
What kernel was it running before? (it might show in /var/log/messages if you're unsure). > -- > Gregor > > $ dmesg > OpenBSD 5.8-current (GENERIC.MP) #1341: Sun Nov 1 01:06:18 MDT 2015 > [email protected]:/usr/src/sys/arch/i386/compile/GENERIC.MP > cpu0: Intel(R) Atom(TM) CPU D2550 @ 1.86GHz ("GenuineIntel" 686-class) 1.87 > GHz > cpu0: > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,SSE3,DTES64,MWAIT,DS-CPL,TM2,SSSE3,xTPR,PDCM,MOVBE,LAHF,PERF,ITSC,SENSOR,ARAT > real mem = 2135064576 (2036MB) > avail mem = 2081611776 (1985MB) > mpath0 at root > scsibus0 at mpath0: 256 targets > mainbus0 at root > bios0 at mainbus0: date 10/11/11, SMBIOS rev. 2.7 @ 0xe9380 (50 entries) > bios0: vendor American Megatrends Inc. version "4.6.5" date 06/21/2012 > bios0: INTEL Corporation Tiger Hill > acpi0 at bios0: rev 2 > acpi0: sleep states S0 S1 S3 S4 S5 > acpi0: tables DSDT FACP APIC MCFG HPET SSDT SSDT SSDT IFEU > acpi0: wakeup devices P0P8(S4) PS2K(S3) PS2M(S3) USB0(S3) USB1(S3) USB2(S3) > USB3(S3) USB7(S3) PXSX(S4) RP01(S4) PXSX(S4) RP02(S4) PXSX(S4) RP03(S4) > PXSX(S4) RP04(S4) [...] > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > mtrr: Pentium Pro MTRR support, 7 var ranges, 88 fixed ranges > cpu0: apic clock running at 133MHz > cpu0: mwait min=64, max=64, C-substates=0.1, IBE > cpu1 at mainbus0: apid 1 (application processor) > cpu1: Intel(R) Atom(TM) CPU D2550 @ 1.86GHz ("GenuineIntel" 686-class) 1.87 > GHz > cpu1: > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,SSE3,DTES64,MWAIT,DS-CPL,TM2,SSSE3,xTPR,PDCM,MOVBE,LAHF,PERF,ITSC,SENSOR,ARAT > cpu2 at mainbus0: apid 2 (application processor) > cpu2: Intel(R) Atom(TM) CPU D2550 @ 1.86GHz ("GenuineIntel" 686-class) 1.87 > GHz > cpu2: > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,SSE3,DTES64,MWAIT,DS-CPL,TM2,SSSE3,xTPR,PDCM,MOVBE,LAHF,PERF,ITSC,SENSOR,ARAT > cpu3 at mainbus0: apid 3 (application processor) > cpu3: Intel(R) Atom(TM) CPU D2550 @ 1.86GHz ("GenuineIntel" 686-class) 1.87 > GHz > cpu3: > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,SSE3,DTES64,MWAIT,DS-CPL,TM2,SSSE3,xTPR,PDCM,MOVBE,LAHF,PERF,ITSC,SENSOR,ARAT > ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 20, 24 pins > acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255 > acpihpet0 at acpi0: 14318179 Hz > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus 5 (P0P8) > acpiprt2 at acpi0: bus 1 (RP01) > acpiprt3 at acpi0: bus 2 (RP02) > acpiprt4 at acpi0: bus 3 (RP03) > acpiprt5 at acpi0: bus 4 (RP04) > acpiec0 at acpi0: not present > acpicpu0 at acpi0: C1(@1 halt!) > acpicpu1 at acpi0: C1(@1 halt!) > acpicpu2 at acpi0: C1(@1 halt!) > acpicpu3 at acpi0: C1(@1 halt!) > acpitz0 at acpi0: critical temperature is 140 degC > acpipwrres0 at acpi0: FN00, resource for FAN0 > acpitz1 at acpi0: critical temperature is 100 degC > acpibat0 at acpi0: BAT0 not present > acpibat1 at acpi0: BAT1 not present > acpibtn0 at acpi0: PWRB > acpiac0 at acpi0: AC unit offline > acpibtn1 at acpi0: SLPB > acpibtn2 at acpi0: LID0 > acpivideo0 at acpi0: GFX0 > acpivout0 at acpivideo0: DD02 > bios0: ROM list: 0xc0000/0xf400! 0xcf800/0x1000 0xd0800/0x1000 0xd1800/0x1000 > 0xd2800/0x1000 > pci0 at mainbus0 bus 0: configuration mode 1 (bios) > pchb0 at pci0 dev 0 function 0 vendor "Intel", unknown product 0x0bf3 rev 0x04 > vga1 at pci0 dev 2 function 0 "Intel GMA 3600" rev 0x0b > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: apic 4 int 16 > pci1 at ppb0 bus 1 > em0 at pci1 dev 0 function 0 "Intel 82583V" rev 0x00: msi, address > 00:03:2d:20:cf:84 > ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: apic 4 int 17 > pci2 at ppb1 bus 2 > em1 at pci2 dev 0 function 0 "Intel 82583V" rev 0x00: msi, address > 00:03:2d:20:cf:85 > ppb2 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x02: apic 4 int 18 > pci3 at ppb2 bus 3 > em2 at pci3 dev 0 function 0 "Intel 82583V" rev 0x00: msi, address > 00:03:2d:20:cf:86 > ppb3 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x02: apic 4 int 19 > pci4 at ppb3 bus 4 > em3 at pci4 dev 0 function 0 "Intel 82583V" rev 0x00: msi, address > 00:03:2d:20:cf:87 > uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 4 int 23 > uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 4 int 19 > uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 4 int 18 > uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 4 int 16 > ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 4 int 23 > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2 > pci5 at ppb4 bus 5 > pcib0 at pci0 dev 31 function 0 "Intel NM10 LPC" rev 0x02 > pciide0 at pci0 dev 31 function 2 "Intel 82801GB SATA" rev 0x02: DMA, channel > 0 configured to native-PCI, channel 1 configured to native-PCI > pciide0: using apic 4 int 19 for native-PCI interrupt > wd0 at pciide0 channel 0 drive 0: <SAMSUNG MMCRE64G5MXP-0VB> > wd0: 16-sector PIO, LBA48, 61057MB, 125045424 sectors > wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 > usb1 at uhci0: USB revision 1.0 > uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb2 at uhci1: USB revision 1.0 > uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb3 at uhci2: USB revision 1.0 > uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb4 at uhci3: USB revision 1.0 > uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > isa0 at pcib0 > isadma0 at isa0 > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > com0: console > com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo > pckbc0 at isa0 port 0x60/5 irq 1 irq 12 > pckbd0 at pckbc0 (kbd slot) > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > wbsio0 at isa0 port 0x4e/2: W83627UHG rev 0x35 > lm1 at wbsio0 port 0x290/8: W83627DHG > npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 > vscsi0 at root > scsibus1 at vscsi0: 256 targets > softraid0 at root > scsibus2 at softraid0: 256 targets > root on wd0a (d28b647d42abe114.a) swap on wd0b dump on wd0b > em0: watchdog timeout -- resetting > em0: watchdog timeout -- resetting > > $ ifconfig > lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 32768 > priority: 0 > groups: lo > inet6 ::1 prefixlen 128 > inet6 fe80::1%lo0 prefixlen 64 scopeid 0x6 > inet 127.0.0.1 netmask 0xff000000 > em0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 > lladdr 00:03:2d:20:cf:84 > description: dsl uplink > priority: 0 > groups: egress > media: Ethernet autoselect (1000baseT full-duplex,rxpause,txpause) > status: active > inet 94.79.177.226 netmask 0xfffffffc broadcast 94.79.177.227 > inet6 fe80::203:2dff:fe20:cf84%em0 prefixlen 64 scopeid 0x1 > em1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 > lladdr 00:03:2d:20:cf:85 > description: Switch > priority: 0 > media: Ethernet autoselect (1000baseT full-duplex) > status: active > inet6 fe80::203:2dff:fe20:cf85%em1 prefixlen 64 scopeid 0x2 > em2: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500 > lladdr 00:03:2d:20:cf:86 > priority: 0 > media: Ethernet autoselect (none) > status: no carrier > em3: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500 > lladdr 00:03:2d:20:cf:87 > priority: 0 > media: Ethernet autoselect (none) > status: no carrier > enc0: flags=0<> > priority: 0 > groups: enc > status: active > vlan10: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 > lladdr 00:03:2d:20:cf:85 > description: VLAN device for IPv4 and IPv6 network > priority: 0 > vlan: 10 parent interface: em1 > groups: vlan intern > status: active > inet 172.31.64.1 netmask 0xfffffe00 broadcast 172.31.65.255 > inet6 fe80::203:2dff:fe20:cf85%vlan10 prefixlen 64 scopeid 0x7 > inet6 2001:470:7193:10::1 prefixlen 64 > vlan6: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 > lladdr 00:03:2d:20:cf:85 > description: VLAN device for IPv6-only network > priority: 0 > vlan: 6 parent interface: em1 > groups: vlan v6only > status: active > inet6 fe80::203:2dff:fe20:cf85%vlan6 prefixlen 64 scopeid 0x8 > inet6 2001:470:7193:6::1 prefixlen 64 > tun0: flags=10<POINTOPOINT> mtu 1500 > description: ChaosVPN > priority: 0 > groups: tun chaosvpn > status: down > gif0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1280 > description: Subraum IPv6 > priority: 0 > groups: gif henet egress > tunnel: inet 94.79.177.226 -> 216.66.80.30 > inet6 fe80::203:2dff:fe20:cf84%gif0 -> prefixlen 64 scopeid 0xa > inet6 2001:470:1f0a:1c3::2 -> 2001:470:1f0a:1c3::1 prefixlen 128 > inet6 2001:470:1f0b:1c3::1 -> prefixlen 64 > pflog0: flags=141<UP,RUNNING,PROMISC> mtu 33192 > priority: 0 > groups: pflog > > ----- End forwarded message ----- > > -- > Gregor > -- > > Incest, n.: > Sibling revelry. >
