On 21 November 2015 at 05:38, Dennis Lindroos <[email protected]> wrote: >>Synopsis: reading from st(4) never stops (no eof?) >>Category: kernel >>Environment: > System : OpenBSD 5.8 > Details : OpenBSD 5.8 (GENERIC) #143: Sun Aug 16 06:15:00 MDT 2015 > [email protected]:/usr/src/sys/arch/alpha/compile/GENERIC > > Architecture: OpenBSD.alpha > Machine : alpha >>Description: > Since upgrading to OpenBSD 5.8, the st(4) SCSI tape doesn't work properly. > Writing files/data to it looks like working as normal, but > when i start reading data, the drive operates, the data is read and the > tape drive stops but the read goes on forever! > > For example, with dd(1) if=/dev/nrst0 bs=32k i end up > reading the last 32k block all over again > (the process is in "physio" state) until i interrupt it. > > I tried writing extra EOF markers with mt(1) and different block sizes. > I get no kernel messages etc. > btw. I'm quite sure it worked in 5.7 but i can't go back now.
Looking at the source tree there don't seem to be any changes to st(4) or qlw(4) between 5.7 or 5.8. So tracking down the problem is pretty much impossible unless you (or someone with equivalent hardware) is able to significantly narrow down exactly when things broke. .... Ken > > >>How-To-Repeat: > Write some data e.g. with dd(1), rewind and try to read it. > >>Fix: > <how to correct or work around the problem, if known (multiple lines)> > > dmesg: > OpenBSD 5.8 (GENERIC) #143: Sun Aug 16 06:15:00 MDT 2015 > [email protected]:/usr/src/sys/arch/alpha/compile/GENERIC > AlphaServer DS10 617 MHz > 8192 byte page size, 1 processor. > real mem = 1342177280 (1280MB) > rsvd mem = 2990080 (2MB) > avail mem = 1310072832 (1249MB) > User Kernel Config > UKC> disable ukphy > 23 ukphy* disabled > UKC> disable ohci > 115 ohci* disabled > UKC> disable ehci > 116 ehci* disabled > UKC> disable uhci > 114 uhci* disabled > UKC> quit > Continuing... > mainbus0 at root > cpu0 at mainbus0: ID 0 (primary), 21264A-6 (pass 2.3 or 2.4) > cpu0: architecture extensions: 307<PAT,MVI,CIX,FIX,BWX> > tsc0 at mainbus0: 21272 Chipset, Cchip rev 0 > tsc0: 2 Dchips, 1 memory bus of 16 bytes > tsc0: arrays present: 256MB, 1024MB, 0MB, 0MB, Dchip 0 rev 1 > tsp0 at tsc0 hose 0 > pci0 at tsp0 bus 0 > sio0 at pci0 dev 7 function 0 "Acer Labs M1533 ISA" rev 0xc3 > dc0 at pci0 dev 9 function 0 "DEC 21142/3" rev 0x41: dec 6600 irq 29, > address 00:10:64:30:aa:c3 > dcphy0 at dc0 phy 31: internal PHY > dc1 at pci0 dev 11 function 0 "DEC 21142/3" rev 0x41: dec 6600 irq 30, > address 00:00:00:00:00:00 > dcphy1 at dc1 phy 31: internal PHY > pciide0 at pci0 dev 13 function 0 "Acer Labs M5229 UDMA IDE" rev 0xc1: > DMA, channel 0 wired to compatibility, channel 1 wired to > compatibility > pciide0: channel 0 disabled (no drives) > atapiscsi0 at pciide0 channel 1 drive 0 > scsibus0 at atapiscsi0: 2 targets > cd0 at scsibus0 targ 0 lun 0: <SAMSUNG, CD-ROM SC-152C, CS04> ATAPI > 5/cdrom removable > cd0(pciide0:1:0): using PIO mode 4, DMA mode 2 > "NEC USB" rev 0x41 at pci0 dev 14 function 0 not configured > "NEC USB" rev 0x41 at pci0 dev 14 function 1 not configured > "NEC USB" rev 0x02 at pci0 dev 14 function 2 not configured > ahc0 at pci0 dev 15 function 0 "Adaptec AHA-3960D U160" rev 0x01: dec > 6600 irq 39 > scsibus1 at ahc0: 16 targets, initiator 7 > sd0 at scsibus1 targ 1 lun 0: <COMPAQ, BD036735C8, B021> SCSI2 > 0/direct fixed eui.00000e1100261454 > sd0: 34732MB, 512 bytes/sector, 71132000 sectors > sd1 at scsibus1 targ 2 lun 0: <COMPAQ, BD036735C8, B017> SCSI2 > 0/direct fixed eui.00000e1100147233 > sd1: 34732MB, 512 bytes/sector, 71132000 sectors > ahc1 at pci0 dev 15 function 1 "Adaptec AHA-3960D U160" rev 0x01: dec > 6600 irq 38 > scsibus2 at ahc1: 16 targets, initiator 7 > qlw0 at pci0 dev 16 function 0 "QLogic ISP1020" rev 0x05: dec 6600 irq 43 > qlw0: firmware rev 4.66.0, attrs 0x0 > scsibus3 at qlw0: 16 targets, initiator 7 > st0 at scsibus3 targ 6 lun 0: <COMPAQ, SuperDLT1, 2E2E> SCSI2 > 1/sequential removable naa.500e09e00006b775 > vga0 at pci0 dev 17 function 0 "TI 3DLabs Permedia 2" rev 0x01 > wsdisplay0 at vga0 mux 1 > wsdisplay0: screen 0-5 added (80x25, vt100 emulation) > isa0 at sio0 > isadma0 at isa0 > fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 > fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > com0: console > com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo > pckbc0 at isa0 port 0x60/5 irq 1 irq 12 > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > lpt0 at isa0 port 0x3bc/4 irq 7 > mcclock0 at isa0 port 0x70/2: mc146818 or compatible > tsciic0 at tsc0 > iic0 at tsciic0 > spdmem0 at iic0 addr 0x50: 128MB SDRAM registered ECC PC66 > spdmem1 at iic0 addr 0x51: 128MB SDRAM registered ECC PC66 > spdmem2 at iic0 addr 0x52: 512MB SDRAM registered ECC PC66 > spdmem3 at iic0 addr 0x53: 512MB SDRAM registered ECC PC66 > stray isa irq 3 > vscsi0 at root > scsibus4 at vscsi0: 256 targets > softraid0 at root > scsibus5 at softraid0: 256 targets > ahc0: target 1 using 16bit transfers > ahc0: target 1 synchronous at 80.0MHz DT, offset = 0x7f > ahc0: target 2 using 16bit transfers > ahc0: target 2 synchronous at 80.0MHz DT, offset = 0x7f > sd2 at scsibus5 targ 1 lun 0: <OPENBSD, SR RAID 1, 005> SCSI2 0/direct fixed > sd2: 7441MB, 512 bytes/sector, 15239472 sectors > sd3 at scsibus5 targ 2 lun 0: <OPENBSD, SR RAID 1, 005> SCSI2 0/direct fixed > sd3: 8760MB, 512 bytes/sector, 17942032 sectors > sd4 at scsibus5 targ 3 lun 0: <OPENBSD, SR RAID 0, 005> SCSI2 0/direct fixed > sd4: 36856MB, 512 bytes/sector, 75481088 sectors > root device (default sd0a): sd2a > swap device (default sd2b): > root on sd2a swap on sd2b dump on sd2b > stray isa irq 3 > > usbdevs: > usbdevs: no USB controllers found > > pcidump: > Domain /dev/pci0: > 0:7:0: Acer Labs M1533 ISA > 0x0000: Vendor ID: 10b9 Product ID: 1533 > 0x0004: Command: 0007 Status: 3200 > 0x0008: Class: 06 Subclass: 01 Interface: 00 Revision: c3 > 0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 00 > 0x0010: BAR empty (00000000) > 0x0014: BAR empty (00000000) > 0x0018: BAR empty (00000000) > 0x001c: BAR empty (00000000) > 0x0020: BAR empty (00000000) > 0x0024: BAR empty (00000000) > 0x0028: Cardbus CIS: 00000000 > 0x002c: Subsystem Vendor ID: 0000 Product ID: 0000 > 0x0030: Expansion ROM Base Address: 00000000 > 0x0038: 00000000 > 0x003c: Interrupt Pin: 00 Line: 00 Min Gnt: 00 Max Lat: 00 > 0x0000: 153310b9 32000007 060100c3 00000000 > 0x0010: 00000000 00000000 00000000 00000000 > 0x0020: 00000000 00000000 00000000 00000000 > 0x0030: 00000000 00000000 00000000 00000000 > 0x0040: 304bc03f 4100091d 00000000 00000000 > 0x0050: 40000000 000002eb 000e007d 04120000 > 0x0060: 00000000 00000000 00000000 00002000 > 0x0070: 000b0012 00801fd3 00000000 00000000 > 0x0080: 00008000 88888888 88888888 00000008 > 0x0090: 00000000 00000000 00000000 00000000 > 0x00a0: 00000000 00000000 00000000 00000000 > 0x00b0: 00000000 00000000 ffff0000 000000ff > 0x00c0: 00080000 00000000 00000000 00000000 > 0x00d0: 00000000 0002eb00 00000000 00000000 > 0x00e0: 0c000000 00000000 00000000 00000000 > 0x00f0: 00000000 00000000 00000000 00000000 > 0:9:0: DEC 21142/3 > 0x0000: Vendor ID: 1011 Product ID: 0019 > 0x0004: Command: 0007 Status: 0280 > 0x0008: Class: 02 Subclass: 00 Interface: 00 Revision: 41 > 0x000c: BIST: 00 Header Type: 00 Latency Timer: ff Cache Line Size: 10 > 0x0010: BAR io addr: 0x00001300/0x0080 > 0x0014: BAR mem 32bit addr: 0x02105000/0x00000400 > 0x0018: BAR empty (00000000) > 0x001c: BAR empty (00000000) > 0x0020: BAR empty (00000000) > 0x0024: BAR empty (00000000) > 0x0028: Cardbus CIS: 00000000 > 0x002c: Subsystem Vendor ID: 1011 Product ID: 500b > 0x0030: Expansion ROM Base Address: 02000000 > 0x0038: 00000000 > 0x003c: Interrupt Pin: 01 Line: 1d Min Gnt: 14 Max Lat: 28 > 0x0000: 00191011 02800007 02000041 0000ff10 > 0x0010: 00001301 02105000 00000000 00000000 > 0x0020: 00000000 00000000 00000000 500b1011 > 0x0030: 02000000 00000000 00000000 2814011d > 0x0040: 00001000 00000000 00000000 00000000 > 0x0050: 00000000 00000000 00000000 00000000 > 0x0060: 00000000 00000000 00000000 00000000 > 0x0070: 00000000 00000000 00000000 00000000 > 0x0080: 00000000 00000000 00000000 00000000 > 0x0090: 00000000 00000000 00000000 00000000 > 0x00a0: 00000000 00000000 00000000 00000000 > 0x00b0: 00000000 00000000 00000000 00000000 > 0x00c0: 00000000 00000000 00000000 00000000 > 0x00d0: 00000000 00000000 00000000 00000000 > 0x00e0: 00000000 00000000 00000000 00000000 > 0x00f0: 00000000 00000000 00000000 00000000 > 0:11:0: DEC 21142/3 > 0x0000: Vendor ID: 1011 Product ID: 0019 > 0x0004: Command: 0007 Status: 8280 > 0x0008: Class: 02 Subclass: 00 Interface: 00 Revision: 41 > 0x000c: BIST: 00 Header Type: 00 Latency Timer: ff Cache Line Size: 10 > 0x0010: BAR io addr: 0x00001380/0x0080 > 0x0014: BAR mem 32bit addr: 0x02105400/0x00000400 > 0x0018: BAR empty (00000000) > 0x001c: BAR empty (00000000) > 0x0020: BAR empty (00000000) > 0x0024: BAR empty (00000000) > 0x0028: Cardbus CIS: 00000000 > 0x002c: Subsystem Vendor ID: 1011 Product ID: 500b > 0x0030: Expansion ROM Base Address: 02040000 > 0x0038: 00000000 > 0x003c: Interrupt Pin: 01 Line: 1e Min Gnt: 14 Max Lat: 28 > 0x0000: 00191011 82800007 02000041 0000ff10 > 0x0010: 00001381 02105400 00000000 00000000 > 0x0020: 00000000 00000000 00000000 500b1011 > 0x0030: 02040000 00000000 00000000 2814011e > 0x0040: 00000600 00000000 00000000 00000000 > 0x0050: 00000000 00000000 00000000 00000000 > 0x0060: 00000000 00000000 00000000 00000000 > 0x0070: 00000000 00000000 00000000 00000000 > 0x0080: 00000000 00000000 00000000 00000000 > 0x0090: 00000000 00000000 00000000 00000000 > 0x00a0: 00000000 00000000 00000000 00000000 > 0x00b0: 00000000 00000000 00000000 00000000 > 0x00c0: 00000000 00000000 00000000 00000000 > 0x00d0: 00000000 00000000 00000000 00000000 > 0x00e0: 00000000 00000000 00000000 00000000 > 0x00f0: 00000000 00000000 00000000 00000000 > 0:13:0: Acer Labs M5229 UDMA IDE > 0x0000: Vendor ID: 10b9 Product ID: 5229 > 0x0004: Command: 0005 Status: 0280 > 0x0008: Class: 01 Subclass: 01 Interface: d0 Revision: c1 > 0x000c: BIST: 00 Header Type: 00 Latency Timer: ff Cache Line Size: 00 > 0x0010: BAR io addr: 0x000001f0/0x0010 > 0x0014: BAR io addr: 0x000003f4/0x0004 > 0x0018: BAR io addr: 0x00000170/0x0010 > 0x001c: BAR io addr: 0x00000374/0x0004 > 0x0020: BAR io addr: 0x00001410/0x0010 > 0x0024: BAR empty (00000000) > 0x0028: Cardbus CIS: 00000000 > 0x002c: Subsystem Vendor ID: 0000 Product ID: 0000 > 0x0030: Expansion ROM Base Address: 00000000 > 0x0038: 00000000 > 0x003c: Interrupt Pin: 01 Line: ee Min Gnt: 02 Max Lat: 04 > 0x0000: 522910b9 02800005 0101d0c1 0000ff00 > 0x0010: 000001f1 000003f5 00000171 00000375 > 0x0020: 00001411 00000000 00000000 00000000 > 0x0030: 00000000 00000000 00000000 040201ee > 0x0040: 0f000000 00000000 4a000000 1aba0000 > 0x0050: 0100002b 40445955 00000000 00310000 > 0x0060: 01000000 01010002 00000000 a0000000 > 0x0070: 001200ff 00070500 00000021 00000000 > 0x0080: 00000000 00000000 00000000 00000000 > 0x0090: 00000000 00000000 00000000 00000000 > 0x00a0: 00000000 00000000 00000000 00000000 > 0x00b0: 00000000 00000000 00000000 00000000 > 0x00c0: 00000000 00000000 00000000 00000000 > 0x00d0: 00000000 00000000 00000000 00000000 > 0x00e0: 00000000 00000000 00000000 00000000 > 0x00f0: 00000000 00000000 00000000 00000000 > 0:14:0: NEC USB > 0x0000: Vendor ID: 1033 Product ID: 0035 > 0x0004: Command: 0006 Status: 0210 > 0x0008: Class: 0c Subclass: 03 Interface: 10 Revision: 41 > 0x000c: BIST: 00 Header Type: 80 Latency Timer: fc Cache Line Size: 10 > 0x0010: BAR mem 32bit addr: 0x02100000/0x00001000 > 0x0014: BAR empty (00000000) > 0x0018: BAR empty (00000000) > 0x001c: BAR empty (00000000) > 0x0020: BAR empty (00000000) > 0x0024: BAR empty (00000000) > 0x0028: Cardbus CIS: 00000000 > 0x002c: Subsystem Vendor ID: 1033 Product ID: 0035 > 0x0030: Expansion ROM Base Address: 00000000 > 0x0038: 00000000 > 0x003c: Interrupt Pin: 01 Line: 23 Min Gnt: 01 Max Lat: 2a > 0x0040: Capability 0x01: Power Management > 0x0000: 00351033 02100006 0c031041 0080fc10 > 0x0010: 02100000 00000000 00000000 00000000 > 0x0020: 00000000 00000000 00000000 00351033 > 0x0030: 00000000 00000040 00000000 2a010123 > 0x0040: 7e020001 00000000 00000000 00000000 > 0x0050: 00000000 00000000 00000000 00000000 > 0x0060: 00000000 00000000 00000000 00000000 > 0x0070: 00000000 00000000 00000000 00000000 > 0x0080: 00000000 00000000 00000000 00000000 > 0x0090: 00000000 00000000 00000000 00000000 > 0x00a0: 00000000 00000000 00000000 00000000 > 0x00b0: 00000000 00000000 00000000 00000000 > 0x00c0: 00000000 00000000 00000000 00000000 > 0x00d0: 00000000 00000000 00000000 00000000 > 0x00e0: 6c303305 00000000 00000000 00000000 > 0x00f0: 00000000 00000000 00000000 00000000 > 0:14:1: NEC USB > 0x0000: Vendor ID: 1033 Product ID: 0035 > 0x0004: Command: 0006 Status: 0210 > 0x0008: Class: 0c Subclass: 03 Interface: 10 Revision: 41 > 0x000c: BIST: 00 Header Type: 00 Latency Timer: fc Cache Line Size: 10 > 0x0010: BAR mem 32bit addr: 0x02101000/0x00001000 > 0x0014: BAR empty (00000000) > 0x0018: BAR empty (00000000) > 0x001c: BAR empty (00000000) > 0x0020: BAR empty (00000000) > 0x0024: BAR empty (00000000) > 0x0028: Cardbus CIS: 00000000 > 0x002c: Subsystem Vendor ID: 1033 Product ID: 0035 > 0x0030: Expansion ROM Base Address: 00000000 > 0x0038: 00000000 > 0x003c: Interrupt Pin: 02 Line: 22 Min Gnt: 01 Max Lat: 2a > 0x0040: Capability 0x01: Power Management > 0x0000: 00351033 02100006 0c031041 0000fc10 > 0x0010: 02101000 00000000 00000000 00000000 > 0x0020: 00000000 00000000 00000000 00351033 > 0x0030: 00000000 00000040 00000000 2a010222 > 0x0040: 7e020001 00000000 00000000 00000000 > 0x0050: 00000000 00000000 00000000 00000000 > 0x0060: 00000000 00000000 00000000 00000000 > 0x0070: 00000000 00000000 00000000 00000000 > 0x0080: 00000000 00000000 00000000 00000000 > 0x0090: 00000000 00000000 00000000 00000000 > 0x00a0: 00000000 00000000 00000000 00000000 > 0x00b0: 00000000 00000000 00000000 00000000 > 0x00c0: 00000000 00000000 00000000 00000000 > 0x00d0: 00000000 00000000 00000000 00000000 > 0x00e0: 00000000 00000000 00000000 00000000 > 0x00f0: 00000000 00000000 00000000 00000000 > 0:14:2: NEC USB > 0x0000: Vendor ID: 1033 Product ID: 00e0 > 0x0004: Command: 0006 Status: 0210 > 0x0008: Class: 0c Subclass: 03 Interface: 20 Revision: 02 > 0x000c: BIST: 00 Header Type: 00 Latency Timer: fc Cache Line Size: 10 > 0x0010: BAR mem 32bit addr: 0x02105800/0x00000100 > 0x0014: BAR empty (00000000) > 0x0018: BAR empty (00000000) > 0x001c: BAR empty (00000000) > 0x0020: BAR empty (00000000) > 0x0024: BAR empty (00000000) > 0x0028: Cardbus CIS: 00000000 > 0x002c: Subsystem Vendor ID: 1033 Product ID: 00e0 > 0x0030: Expansion ROM Base Address: 00000000 > 0x0038: 00000000 > 0x003c: Interrupt Pin: 03 Line: 21 Min Gnt: 10 Max Lat: 22 > 0x0040: Capability 0x01: Power Management > 0x0000: 00e01033 02100006 0c032002 0000fc10 > 0x0010: 02105800 00000000 00000000 00000000 > 0x0020: 00000000 00000000 00000000 00e01033 > 0x0030: 00000000 00000040 00000000 22100321 > 0x0040: 7e020001 00000000 00000000 00000000 > 0x0050: 00000000 00000000 00000000 00000000 > 0x0060: 003f2020 00000000 00000000 00000000 > 0x0070: 00000000 00000000 00000000 00000000 > 0x0080: 00000000 00000000 00000000 00000000 > 0x0090: 00000000 00000000 00000000 00000000 > 0x00a0: 00000000 00000000 00000000 00000000 > 0x00b0: 00000000 00000000 00000000 00000000 > 0x00c0: 00000000 00000000 00000000 00000000 > 0x00d0: 00000000 00000000 00000000 00000000 > 0x00e0: 6c303305 00000000 00000000 00000000 > 0x00f0: 00000000 00000000 00000000 00000000 > 0:15:0: Adaptec AHA-3960D U160 > 0x0000: Vendor ID: 9005 Product ID: 00c0 > 0x0004: Command: 0007 Status: 02b0 > 0x0008: Class: 01 Subclass: 00 Interface: 00 Revision: 01 > 0x000c: BIST: 80 Header Type: 80 Latency Timer: fc Cache Line Size: 10 > 0x0010: BAR io addr: 0x00001000/0x0100 > 0x0014: BAR mem 64bit addr: 0x0000000002102000/0x00001000 > 0x001c: BAR empty (00000000) > 0x0020: BAR empty (00000000) > 0x0024: BAR empty (00000000) > 0x0028: Cardbus CIS: 00000000 > 0x002c: Subsystem Vendor ID: 9005 Product ID: f620 > 0x0030: Expansion ROM Base Address: 02080000 > 0x0038: 00000000 > 0x003c: Interrupt Pin: 01 Line: 27 Min Gnt: 28 Max Lat: 19 > 0x00dc: Capability 0x01: Power Management > 0x0000: 00c09005 02b00007 01000001 8080fc10 > 0x0010: 00001001 02102004 00000000 00000000 > 0x0020: 00000000 00000000 00000000 f6209005 > 0x0030: 02080000 000000dc 00000000 19280127 > 0x0040: 80000482 00000000 00000000 00000000 > 0x0050: 00000000 00000000 00000000 00000000 > 0x0060: 00000000 00000000 00000000 00000000 > 0x0070: 00000000 00000000 00000000 00000000 > 0x0080: 00000000 00000000 00000000 00000000 > 0x0090: 00000000 00000000 00000000 00000000 > 0x00a0: 00000000 00000000 00000000 00000000 > 0x00b0: 00000000 00000000 00000000 00000000 > 0x00c0: 00000000 00000000 00000000 00000000 > 0x00d0: 00000000 00000000 00000000 00020001 > 0x00e0: 00000000 00000000 00000000 00000000 > 0x00f0: 00000000 00000000 00000000 00000000 > 0:15:1: Adaptec AHA-3960D U160 > 0x0000: Vendor ID: 9005 Product ID: 00c0 > 0x0004: Command: 0007 Status: 02b0 > 0x0008: Class: 01 Subclass: 00 Interface: 00 Revision: 01 > 0x000c: BIST: 80 Header Type: 80 Latency Timer: fc Cache Line Size: 10 > 0x0010: BAR io addr: 0x00001100/0x0100 > 0x0014: BAR mem 64bit addr: 0x0000000002103000/0x00001000 > 0x001c: BAR empty (00000000) > 0x0020: BAR empty (00000000) > 0x0024: BAR empty (00000000) > 0x0028: Cardbus CIS: 00000000 > 0x002c: Subsystem Vendor ID: 9005 Product ID: f620 > 0x0030: Expansion ROM Base Address: 020a0000 > 0x0038: 00000000 > 0x003c: Interrupt Pin: 02 Line: 26 Min Gnt: 28 Max Lat: 19 > 0x00dc: Capability 0x01: Power Management > 0x0000: 00c09005 02b00007 01000001 8080fc10 > 0x0010: 00001101 02103004 00000000 00000000 > 0x0020: 00000000 00000000 00000000 f6209005 > 0x0030: 020a0000 000000dc 00000000 19280226 > 0x0040: 80000482 00000000 00000000 00000000 > 0x0050: 00000000 00000000 00000000 00000000 > 0x0060: 00000000 00000000 00000000 00000000 > 0x0070: 00000000 00000000 00000000 00000000 > 0x0080: 00000000 00000000 00000000 00000000 > 0x0090: 00000000 00000000 00000000 00000000 > 0x00a0: 00000000 00000000 00000000 00000000 > 0x00b0: 00000000 00000000 00000000 00000000 > 0x00c0: 00000000 00000000 00000000 00000000 > 0x00d0: 00000000 00000000 00000000 00020001 > 0x00e0: 00000000 00000000 00000000 00000000 > 0x00f0: 00000000 00000000 00000000 00000000 > 0:16:0: QLogic ISP1020 > 0x0000: Vendor ID: 1077 Product ID: 1020 > 0x0004: Command: 0157 Status: 0200 > 0x0008: Class: 01 Subclass: 00 Interface: 00 Revision: 05 > 0x000c: BIST: 00 Header Type: 00 Latency Timer: 80 Cache Line Size: 10 > 0x0010: BAR io addr: 0x00001200/0x0100 > 0x0014: BAR mem 32bit addr: 0x02104000/0x00001000 > 0x0018: BAR empty (00000000) > 0x001c: BAR empty (00000000) > 0x0020: BAR empty (00000000) > 0x0024: BAR empty (00000000) > 0x0028: Cardbus CIS: 00000000 > 0x002c: Subsystem Vendor ID: 0000 Product ID: 0000 > 0x0030: Expansion ROM Base Address: 020e0000 > 0x0038: 00000000 > 0x003c: Interrupt Pin: 01 Line: 2b Min Gnt: 00 Max Lat: 00 > 0x0000: 10201077 02000157 01000005 00008010 > 0x0010: 00001201 02104000 00000000 00000000 > 0x0020: 00000000 00000000 00000000 00000000 > 0x0030: 020e0000 00000000 00000000 0000012b > 0x0040: 00000034 00000000 00000000 00000000 > 0x0050: 00000000 00000000 00000000 00000000 > 0x0060: 00000000 00000000 00000000 00000000 > 0x0070: 00000000 00000000 00000000 00000000 > 0x0080: 10201077 02000157 01000005 00008010 > 0x0090: 00001201 02104000 00000000 00000000 > 0x00a0: 00000000 00000000 00000000 00000000 > 0x00b0: 020e0000 00000000 00000000 0000012b > 0x00c0: 00000034 00000000 00000000 00000000 > 0x00d0: 00000000 00000000 00000000 00000000 > 0x00e0: 00000000 00000000 00000000 00000000 > 0x00f0: 00000000 00000000 00000000 00000000 > 0:17:0: TI 3DLabs Permedia 2 > 0x0000: Vendor ID: 104c Product ID: 3d07 > 0x0004: Command: 0007 Status: 0280 > 0x0008: Class: 03 Subclass: 00 Interface: 00 Revision: 01 > 0x000c: BIST: 00 Header Type: 00 Latency Timer: ff Cache Line Size: 00 > 0x0010: BAR mem 32bit addr: 0x020c0000/0x00020000 > 0x0014: BAR mem 32bit addr: 0x01000000/0x00800000 > 0x0018: BAR mem 32bit addr: 0x01800000/0x00800000 > 0x001c: BAR empty (00000000) > 0x0020: BAR empty (00000000) > 0x0024: BAR empty (00000000) > 0x0028: Cardbus CIS: 00000000 > 0x002c: Subsystem Vendor ID: 1048 Product ID: 0a32 > 0x0030: Expansion ROM Base Address: 020f0000 > 0x0038: 00000000 > 0x003c: Interrupt Pin: 01 Line: 2f Min Gnt: c0 Max Lat: c0 > 0x0000: 3d07104c 02800007 03000001 0000ff00 > 0x0010: 020c0000 01000000 01800000 00000000 > 0x0020: 00000000 00000000 00000000 0a321048 > 0x0030: 020f0000 00000000 00000000 c0c0012f > 0x0040: 00000000 00000000 00000000 00000000 > 0x0050: 00000000 00000000 00000000 00000000 > 0x0060: 00000000 00000000 00000000 00000000 > 0x0070: 00000000 00000000 00000000 00000000 > 0x0080: 00000000 00000000 00000000 00000000 > 0x0090: 00000000 00000000 00000000 00000000 > 0x00a0: 00000000 00000000 00000000 00000000 > 0x00b0: 00000000 00000000 00000000 00000000 > 0x00c0: 00000000 00000000 00000000 00000000 > 0x00d0: 00000000 00000000 00000000 00000000 > 0x00e0: 00000000 00000000 00000000 00000000 > 0x00f0: 00000000 00000000 00000040 00000040 >
