> On 29 Nov 2015, at 5:55 AM, Fred <[email protected]> wrote: > > On 11/27/15 12:43, David Gwynne wrote: >> On Wed, Nov 25, 2015 at 08:32:19PM +0000, Fred wrote: >>> >>> Well with that diff I hit another panic - which seems to be >>> triggered by the nic: >> >> i also think this is related to the nic. i have started cleaning >> dc(4), but would like some tests before going further. >> >> could you guys try this and let me know how it goes? i dont expect >> it to fix the problems, but i also dont expect them to get worse. >> >> cheers, >> dlg >> > > Hi David, > > I've been running this diff today - and so far the kernel has been more > stable then it has been recently.
ok. ill put it in. thank you for testing. ill have a look at another cleanup soon too. cheers, dlg > > Output from ifconfig dc, and dmesg below. > > Thanks > > Fred > > dc0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 > lladdr 00:03:ba:13:a8:c7 > priority: 0 > media: Ethernet autoselect (none) > status: no carrier > inet 192.168.50.50 netmask 0xffffff00 broadcast 192.168.50.255 > dc1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 > lladdr 00:03:ba:13:a8:c8 > priority: 0 > groups: egress > media: Ethernet autoselect (100baseTX full-duplex) > status: active > inet 192.168.50.51 netmask 0xffffff00 broadcast 192.168.50.255 > > dmesg:OpenBSD 5.8-current (bsddc) #0: Sat Nov 28 14:12:26 GMT 2015 > [email protected]:/usr/src/sys/arch/sparc64/compile/bsddc > real mem = 268435456 (256MB) > avail mem = 248209408 (236MB) > mpath0 at root > scsibus0 at mpath0: 256 targets > mainbus0 at root: Sun Fire V100 (UltraSPARC-IIe 500MHz) > cpu0 at mainbus0: SUNW,UltraSPARC-IIe (rev 1.4) @ 500 MHz > cpu0: physical 16K instruction (32 b/l), 16K data (32 b/l), 256K external (64 > b/l) > psycho0 at mainbus0: SUNW,sabre, impl 0, version 0, ign 7c0 > psycho0: bus range 0-0, PCI bus 0 > psycho0: dvma map 60000000-7fffffff > pci0 at psycho0 > ebus0 at pci0 dev 7 function 0 "Acer Labs M1533 ISA" rev 0x00 > "dma" at ebus0 addr 0-ffff ivec 0x2a not configured > rtc0 at ebus0 addr 70-71: m5819 > power0 at ebus0 addr 2000-2007 ivec 0x23 > lom0 at ebus0 addr 8010-8011 ivec 0x2a: LOMlite2 rev 3.11 > com0 at ebus0 addr 3f8-3ff ivec 0x2b: ns16550a, 16 byte fifo > com0: console > com1 at ebus0 addr 2e8-2ef ivec 0x2b: ns16550a, 16 byte fifo > "flashprom" at ebus0 addr 0-7ffff not configured > alipm0 at pci0 dev 3 function 0 "Acer Labs M7101 Power" rev 0x00: 74KHz clock > iic0 at alipm0 > "max1617" at alipm0 addr 0x18 skipped due to alipm0 bugs > spdmem0 at iic0 addr 0x56: 128MB SDRAM registered ECC PC133CL2 > spdmem1 at iic0 addr 0x57: 128MB SDRAM registered ECC PC133CL2 > dc0 at pci0 dev 12 function 0 "Davicom DM9102" rev 0x31: ivec 0x7c6, address > 00:03:ba:13:a8:c7 > amphy0 at dc0 phy 1: DM9102 10/100 PHY, rev. 0 > dc1 at pci0 dev 5 function 0 "Davicom DM9102" rev 0x31: ivec 0x7dc, address > 00:03:ba:13:a8:c8 > amphy1 at dc1 phy 1: DM9102 10/100 PHY, rev. 0 > ohci0 at pci0 dev 10 function 0 "Acer Labs M5237 USB" rev 0x03: ivec 0x7e4, > version 1.0, legacy support > pciide0 at pci0 dev 13 function 0 "Acer Labs M5229 UDMA IDE" rev 0xc3: DMA, > channel 0 configured to native-PCI, channel 1 configured to native-PCI > pciide0: using ivec 0x7cc for native-PCI interrupt > pciide0: channel 0 disabled (no drives) > wd0 at pciide0 channel 1 drive 0: <WDC WD800BB-00DAA3> > wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors > atapiscsi0 at pciide0 channel 1 drive 1 > scsibus1 at atapiscsi0: 2 targets > cd0 at scsibus1 targ 0 lun 0: <TEAC, CD-224E, 1.7A> ATAPI 5/cdrom removable > wd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2 > cd0(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2 > usb0 at ohci0: USB revision 1.0 > uhub0 at usb0 "Acer Labs OHCI root hub" rev 1.00/1.00 addr 1 > vscsi0 at root > scsibus2 at vscsi0: 256 targets > softraid0 at root > scsibus3 at softraid0: 256 targets > bootpath: /pci@1f,0/ide@d,0/disk@2,0 > root on wd0a (a0af7098621c5786.a) swap on wd0b dump on wd0b >
