On Sat, Oct 10, 2015 at 08:56:03PM -0500, Brian Conway wrote: > Preface: I believe this is a regression in VirtualBox 5.x and reported > it to them a while ago (https://www.virtualbox.org/ticket/14515). I'm > sending it along to bugs@ just in case the trace is of interest to > anyone. If not, feel free to disregard.
Following up on old mails. From the link above it looks like this was fixed by Virtualbox already. -ml > > Symptom: When booting 5.8-stable i386 with > 1 CPU, system halts on > boot before /etc/rc with "cpu1 failed to become ready". > > Workarounds: > - Revert to VirtualBox 4.3.30. > - Drop CPU count to 1. > - Use 5.7-stable i386. > - Use any version of amd64 with any number of CPUs. > - Don't use VirtualBox. > > Dmesg, trace, ps, registers below. Thanks for your time. > > Brian Conway > > >> OpenBSD/i386 BOOT 3.26 > boot> > booting hd0a:/bsd: 9749372+1069036 [83+411760+405701]=0xb18eb8 > entry point at 0x200120 > > [ using 818000 bytes of bsd ELF symbol table ] > Copyright (c) 1982, 1986, 1989, 1991, 1993 > The Regents of the University of California. All rights reserved. > Copyright (c) 1995-2015 OpenBSD. All rights reserved. http://www.OpenBSD.org > > OpenBSD 5.8-stable (GENERIC.MP) #0: Fri Oct 2 22:21:38 UTC 2015 > > [email protected]:/usr/src/sys/arch/i386/compile/GENERIC.MP > cpu0: Intel(R) Core(TM) i7-3615QM CPU @ 2.30GHz ("GenuineIntel" > 686-class) 2.30 GHz > cpu0: > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,NXE,LONG,SSE3,PCLMUL,SSSE3,CX16,SSE4.1,SSE4.2,POPCNT,AES,XSAVE,AVX,RDRAND,HV,LAHF,ITSC > real mem = 804732928 (767MB) > avail mem = 776245248 (740MB) > mpath0 at root > scsibus0 at mpath0: 256 targets > mainbus0 at root > bios0 at mainbus0: date 06/23/99, BIOS32 rev. 0 @ 0xfda00, SMBIOS rev. > 2.5 @ 0xe1000 (10 entries) > bios0: vendor innotek GmbH version "VirtualBox" date 12/01/2006 > bios0: innotek GmbH VirtualBox > acpi0 at bios0: rev 2 > acpi0: sleep states S0 S5 > acpi0: tables DSDT FACP APIC SSDT > acpi0: wakeup devices > acpitimer0 at acpi0: 3579545 Hz, 32 bits > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > mtrr: CPU supports MTRRs but not enabled by BIOS > cpu0: apic clock running at 1000MHz > cpu1 at mainbus0: apid 1 (application processor) > cpu1: Intel(R) Core(TM) i7-3615QM CPU @ 2.30GHz ("GenuineIntel" > 686-class) 2.30 GHz > cpu1: > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,NXE,LONG,SSE3,PCLMUL,SSSE3,CX16,SSE4.1,SSE4.2,POPCNT,AES,XSAVE,AVX,RDRAND,HV,LAHF,ITSC > cpu2 at mainbus0: apid 2 (application processor) > cpu2: Intel(R) Core(TM) i7-3615QM CPU @ 2.30GHz ("GenuineIntel" > 686-class) 2.30 GHz > cpu2: > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,NXE,LONG,SSE3,PCLMUL,SSSE3,CX16,SSE4.1,SSE4.2,POPCNT,AES,XSAVE,AVX,RDRAND,HV,LAHF,ITSC > ioapic0 at mainbus0: apid 3 pa 0xfec00000, version 11, 24 pins > acpiprt0 at acpi0: bus 0 (PCI0) > acpicpu0 at acpi0: C1(@1 halt!) > acpicpu1 at acpi0: C1(@1 halt!) > acpicpu2 at acpi0: C1(@1 halt!) > acpibat0 at acpi0: BAT0 model "1" serial 0 type VBOX oem "innotek" > acpiac0 at acpi0: AC unit online > acpivideo0 at acpi0: GFX0 > bios0: ROM list: 0xc0000/0x8000 0xe2000/0xd000 > pvbus0 at mainbus0: KVM > pci0 at mainbus0 bus 0: configuration mode 1 (bios) > pchb0 at pci0 dev 0 function 0 "Intel 82441FX" rev 0x02 > pcib0 at pci0 dev 1 function 0 "Intel 82371SB ISA" rev 0x00 > vga1 at pci0 dev 2 function 0 "InnoTek VirtualBox Graphics Adapter" rev 0x00 > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > em0 at pci0 dev 3 function 0 "Intel 82540EM" rev 0x02: apic 3 int 19, > address 08:00:27:c3:57:d8 > "InnoTek VirtualBox Guest Service" rev 0x00 at pci0 dev 4 function 0 > not configured > piixpm0 at pci0 dev 7 function 0 "Intel 82371AB Power" rev 0x08: SMBus > disabled > ahci0 at pci0 dev 13 function 0 "Intel 82801HBM AHCI" rev 0x02: apic 3 > int 21, AHCI 1.1 > ahci0: device on port 0 didn't come ready, TFD: 0x171<ERR> > ahci0: port 0: 3.0Gb/s > scsibus1 at ahci0: 32 targets > sd0 at scsibus1 targ 0 lun 0: <ATA, VBOX HARDDISK, 1.0> SCSI3 0/direct > fixed t10.ATA_VBOX_HARDDISK_VBe5c20152-ef51bee2_ > sd0: 10240MB, 512 bytes/sector, 20971520 sectors > isa0 at pcib0 > isadma0 at isa0 > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > com0: console > pckbc0 at isa0 port 0x60/5 irq 1 irq 12 > pckbd0 at pckbc0 (kbd slot) > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pms0 at pckbc0 (aux slot) > wsmouse0 at pms0 mux 0 > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 > vscsi0 at root > scsibus2 at vscsi0: 256 targets > softraid0 at root > scsibus3 at softraid0: 256 targets > root on sd0a (1e7613432019dde1.a) swap on sd0b dump on sd0b > cpu1 failed to become ready > Stopped at Debugger+0x7: leave > ddb{0}> show panic > the kernel did not panic > ddb{0}> trace > Debugger(d0aecb8b,d1f9f014,d0d1af18,d0390c7b,d0b2a368) at Debugger+0x7 > cpu_boot_secondary(d1f9f000,d09d1f82,0,d03fa6c9,1) at cpu_boot_secondary+0x84 > cpu_boot_secondary_processors(d05149d0,0,0,d09af8e1,d039d640) at > cpu_boot_secon > dary_processors+0x60 > main(d0200503,d020050b,0,0,0) at main+0x7e8 > ddb{0}> ps > PID PPID PGRP UID S FLAGS WAIT COMMAND > 6077 0 0 0 2 0x14200 zerothread > 20663 0 0 0 2 0x14200 aiodoned > 26137 0 0 0 2 0x14200 update > 3248 0 0 0 2 0x14200 cleaner > 17017 0 0 0 2 0x14200 reaper > 13840 0 0 0 2 0x14200 pagedaemon > 2302 0 0 0 3 0x14200 bored crypto > 15051 0 0 0 2 0x14600 pfpurge > 18982 0 0 0 3 0x40014200 acpi0 acpi0 > 21315 0 0 0 1 0x14200 idle2 > 7307 0 0 0 1 0x14200 idle1 > 965 0 0 0 3 0x14200 bored softnet > 9324 0 0 0 3 0x14200 bored systqmp > 29195 0 0 0 2 0x14200 systq > 9770 0 0 0 3 0x40014200 idle0 > 31005 0 0 0 3 0x14200 kmalloc kmthread > 1 0 0 0 3 0 initexec swapper > * 0 -1 0 0 7 0x10200 swapper > ddb{0}> show registers > ds 0x10 > es 0x10 > fs 0x20 > gs 0 > edi 0xd27000 > esi 0xd1f9f000 end+0x134db78 > ebp 0xd0d1aee8 end+0xc9a60 > ebx 0 > edx 0 > ecx 0xd0b2c280 kprintf_mutex > eax 0x1c > eip 0xd0556437 Debugger+0x7 > cs 0x8 > eflags 0x286 > esp 0xd0d1aed8 end+0xc9a50 > ss 0x10 > Debugger+0x7: leave > ddb{0}> >
