Argh, too soon.. Started a make build to create some load and it
paniced:
OpenBSD 5.9-beta (GENERIC-IP32) #2: Sat Jan 9 14:42:48 CET 2016
[email protected]:/svc/src/sys/arch/sgi/compile/GENERIC-IP32
real mem = 268435456 (256MB)
rsvd mem = 7020544 (7MB)
avail mem = 244121600 (232MB)
mainbus0 at root: O2
cpu0 at mainbus0: MIPS R5000 CPU rev 2.1 180 MHz, R5000 based FPC rev 1.0
cpu0: cache L1-I 32KB D 32KB 2 way, L2 512KB direct
clock0 at mainbus0: int 5
macebus0 at mainbus0: crime rev 10.1
com0 at macebus0 base 0x00390000 irq 4: ns16550a, 16 byte fifo
com0: console
com1 at macebus0 base 0x00398000 irq 4: ns16550a, 16 byte fifo
dsrtc0 at macebus0 base 0x003a0000: DS1687
macepcibr0 at macebus0 base 0x00080000 irq 7: mace rev 1
pci0 at macepcibr0 bus 0
ahc0 at pci0 dev 1 function 0 "Adaptec AIC-7880" rev 0x00: irq 8
ahc0: Host Adapter Bios disabled. Using default SCSI device parameters
scsibus0 at ahc0: 16 targets, initiator 7
sd0 at scsibus0 targ 1 lun 0: <ModusLnk, MXJ3147SC800600W, M108> SCSI3 0/direct
fixed serial.ModusLnkMXJ3147SC800600W_ML00025928
sd0: 140272MB, 512 bytes/sector, 287277984 sectors
cd0 at scsibus0 targ 4 lun 0: <TOSHIBA, CD-ROM XM-5701TA, 0167> SCSI2 5/cdrom
removable
ahc1 at pci0 dev 2 function 0 "Adaptec AIC-7880" rev 0x00: irq 9
ahc1: Host Adapter Bios disabled. Using default SCSI device parameters
scsibus1 at ahc1: 16 targets, initiator 7
uhci0 at pci0 dev 3 function 0 "VIA VT83C572 USB" rev 0x61: irq 10
uhci1 at pci0 dev 3 function 1 "VIA VT83C572 USB" rev 0x61: irq 13
ehci0 at pci0 dev 3 function 2 "VIA VT6202 USB" rev 0x63: irq 14
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "VIA EHCI root hub" rev 2.00/1.00 addr 1
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "VIA UHCI root hub" rev 1.00/1.00 addr 1
mavb0 at macebus0 base 0x00300000 irq 6: AD1843 rev 1
audio0 at mavb0
mec0 at macebus0 base 0x00280000 irq 3: MAC-110 rev 1, address 08:00:69:05:e3:8d
nsphy0 at mec0 phy 8: DP83840 10/100 PHY, rev. 1
mkbc0 at macebus0 base 0x00320000 irq 5
power0 at macebus0 irq 5
gbe0 at mainbus0: rev 1, 8MB, 1280x1024 at 8 bits
wsdisplay0 at gbe0 mux 1
wsdisplay0: screen 0 added (std, vt100 emulation)
ahc0: target 1 using 16bit transfers
ahc0: target 1 synchronous at 20.0MHz, offset = 0x8
ahc0: target 1 using 16bit transfers
ahc0: target 1 synchronous at 20.0MHz, offset = 0x8
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
boot device: sd0
root on sd0a (8a4df0c12f01a498.a) swap on sd0b dump on sd0b
ahc0: target 1 using 16bit transfers
ahc0: target 1 synchronous at 20.0MHz, offset = 0x8
ahc0: target 1 using 16bit transfers
ahc0: target 1 synchronous at 20.0MHz, offset = 0x8
ahc0: target 1 using 16bit transfers
ahc0: target 1 synchronous at 20.0MHz, offset = 0x8
Automatic boot in progress: starting file system checks.
/dev/sd0a (8a4df0c12f01a498.a): file system is clean; not checking
/dev/sd0g (8a4df0c12f01a498.g): file system is clean; not checking
/dev/sd0d (8a4df0c12f01a498.d): file system is clean; not checking
/dev/sd0f (8a4df0c12f01a498.f): file system is clean; not checking
/dev/sd0e (8a4df0c12f01a498.e): file system is clean; not checking
setting tty flags
pf enabled
kern.pool_debug: 0 -> 0
starting network
DHCPREQUEST on mec0 to 255.255.255.255
DHCPACK from 10.0.0.1 (d0:50:99:46:9f:b9)
bound to 10.0.0.16 -- renewal in 21600 seconds.
starting early daemons: syslogd pflogd ntpd.
starting RPC daemons:.
savecore: no core dump
checking quotas: done.
clearing /tmp
starting pre-securelevel daemons:.
kern.securelevel: 0 -> 1
creating runtime link editor directory cache.
preserving editor files.
starting network daemons: sshd smtpd sndiod.
starting local daemons: cron xdm.
Sat Jan 9 15:02:51 CET 2016
panic: mtx 0xffffffff807ac2d0: locking against myself
Stopped at Debugger+0x4: jr ra
Debugger+0x8: nop
TID PID UID PRFLAGS PFLAGS CPU COMMAND
*29583 29583 0 0x100000 0 0 ntpd
Debugger+0x4 (73432d5303a2b0e6,80,500,c0000000078cb628) ra 0xffffffff8023d910 s
p 0xc0000000078cb660, sz 0
panic+0x100 (73432d5303a2b0e6,ffffffff807ac2d0,3,1) ra 0xffffffff804181c0 sp 0
xc0000000078cb660, sz 112
mtx_enter+0xb8 (73432d5303a2b0e6,ffffffff807ac2d0,3,1) ra 0xffffffff80411e04 s
p 0xc0000000078cb6d0, sz 48
pmap_kenter_pa+0x84 (73432d5303a2b0e6,ffffffff807ac2d0,3,1) ra 0xffffffff803b4
938 sp 0xc0000000078cb700, sz 48
km_alloc+0x2c8 (73432d5303a2b0e6,ffffffff807ac2d0,3,1) ra 0xffffffff802381b8 s
p 0xc0000000078cb730, sz 112
pool_page_alloc+0x90 (73432d5303a2b0e6,ffffffff807ac2d0,c0000000078cb8c4,1) ra
0xffffffff802384ac sp 0xc0000000078cb7a0, sz 48
pool_allocator_alloc+0x1c (73432d5303a2b0e6,ffffffff807ac2d0,c0000000078cb8c4,1
) ra 0xffffffff80239844 sp 0xc0000000078cb7d0, sz 32
pool_p_alloc+0x5c (73432d5303a2b0e6,ffffffff807ac2d0,c0000000078cb8c4,1) ra 0x
ffffffff80239f70 sp 0xc0000000078cb7f0, sz 64
pool_do_get+0x268 (73432d5303a2b0e6,ffffffff807ac2d0,c0000000078cb8c4,1) ra 0x
ffffffff80239668 sp 0xc0000000078cb830, sz 80
pool_get+0xf0 (73432d5303a2b0e6,ffffffff807ac2d0,c0000000078cb8c4,1) ra 0xffff
ffff804125a8 sp 0xc0000000078cb880, sz 128
pmap_enter_pv+0x100 (73432d5303a2b0e6,ffffffff807ac2d0,c0000000078cb8c4,1) ra 0
xffffffff80414534 sp 0xc0000000078cb900, sz 80
pmap_enter+0x3c4 (73432d5303a2b0e6,ffffffff807ac2d0,c0000000078cb8c4,1) ra 0xf
fffffff803b21c4 sp 0xc0000000078cb950, sz 112
uvm_fault+0x564 (ffffffff8076cba0,c000000007ac0000,0,1) ra 0xffffffff80417474 s
p 0xc0000000078cb9c0, sz 528
itsa+0x9cc (ffffffff8076cba0,c000000007ac0000,0,1) ra 0xffffffff8041a82c sp 0x
c0000000078cbbd0, sz 176
User-level: pid 29583
http://www.openbsd.org/ddb.html describes the minimum info required in bug
reports. Insufficient info makes it difficult to find and fix bugs.
ddb>
