Hi,
this is a kernel build on Sat. 2016-01-09 from source plus
Subject: rework em(4) tx ring handling
From: David Gwynne <david () gwynne ! id ! au>
Date: 2016-01-08 5:18:50
panic is at the end, unfortunatly it ran with bad ddb settings.
entry point at 0x1000160 [7205c766, 34000004, 24448b12, 60a304]
[ using 955488 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2016 OpenBSD. All rights reserved. http://www.OpenBSD.org
OpenBSD 5.9-beta (GENERIC.MP) #193: Mon Jan 11 20:46:17 CET 2016
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 8545308672 (8149MB)
avail mem = 8282198016 (7898MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xeb4c0 (57 entries)
bios0: vendor American Megatrends Inc. version "2.00" date 05/08/2012
bios0: Supermicro X9SCL/X9SCM
acpi0 at bios0: rev 2
acpi0: sleep states S0 S1 S4 S5
acpi0: tables DSDT FACP APIC FPDT MCFG PRAD HPET SSDT SPMI SSDT SSDT
acpi0: wakeup devices PS2K(S4) PS2M(S4) UAR1(S4) UAR2(S4) P0P1(S4) USB1(S4)
USB2(S4) USB3(S4) USB4(S4) USB5(S4) USB6(S4) USB7(S4) PXSX(S4) RP01(S4)
PXSX(S4) RP02(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Xeon(R) CPU E31260L @ 2.40GHz, 2394.93 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.1, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Xeon(R) CPU E31260L @ 2.40GHz, 2394.56 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 4 (application processor)
cpu2: Intel(R) Xeon(R) CPU E31260L @ 2.40GHz, 2394.56 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 0, core 2, package 0
cpu3 at mainbus0: apid 6 (application processor)
cpu3: Intel(R) Xeon(R) CPU E31260L @ 2.40GHz, 2394.56 MHz
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 0, core 3, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 5 (P0P1)
acpiprt2 at acpi0: bus 3 (RP01)
acpiprt3 at acpi0: bus -1 (RP02)
acpiprt4 at acpi0: bus -1 (RP03)
acpiprt5 at acpi0: bus -1 (RP04)
acpiprt6 at acpi0: bus 4 (RP05)
acpiprt7 at acpi0: bus -1 (RP06)
acpiprt8 at acpi0: bus -1 (RP07)
acpiprt9 at acpi0: bus -1 (RP08)
acpiprt10 at acpi0: bus 1 (PEG0)
acpiprt11 at acpi0: bus 2 (PEG1)
acpiprt12 at acpi0: bus -1 (PEG2)
acpiprt13 at acpi0: bus -1 (PEG3)
acpiec0 at acpi0: not present
acpicpu0 at acpi0: C3(350@104 mwait.1@0x20), C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C3(350@104 mwait.1@0x20), C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C3(350@104 mwait.1@0x20), C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C3(350@104 mwait.1@0x20), C1(1000@1 mwait.1), PSS
acpipwrres0 at acpi0: FN00, resource for FAN0
acpipwrres1 at acpi0: FN01, resource for FAN1
acpipwrres2 at acpi0: FN02, resource for FAN2
acpipwrres3 at acpi0: FN03, resource for FAN3
acpipwrres4 at acpi0: FN04, resource for FAN4
acpitz0 at acpi0: critical temperature is 74 degC
acpitz1 at acpi0: critical temperature is 74 degC
acpibat0 at acpi0: BAT0 not present
acpibat1 at acpi0: BAT1 not present
acpibat2 at acpi0: BAT2 not present
acpibtn0 at acpi0: PWRB
acpibtn1 at acpi0: LID0
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD02
ipmi at mainbus0 not configured
cpu0: Enhanced SpeedStep 2394 MHz: speeds: 2401, 2400, 2300, 2200, 2100, 2000,
1900, 1800, 1700, 1600 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Xeon E3-1200 Host" rev 0x09
ppb0 at pci0 dev 1 function 0 "Intel Core 2G PCIE" rev 0x09: msi
pci1 at ppb0 bus 1
ppb1 at pci0 dev 1 function 1 "Intel Core 2G PCIE" rev 0x09: msi
pci2 at ppb1 bus 2
em0 at pci2 dev 0 function 0 "Intel 82572EI" rev 0x06: apic 2 int 17, address
68:05:ca:07:79:db
em1 at pci0 dev 25 function 0 "Intel 82579LM" rev 0x05: msi, address
00:25:90:75:fa:af
ehci0 at pci0 dev 26 function 0 "Intel 6 Series USB" rev 0x05: apic 2 int 16
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb2 at pci0 dev 28 function 0 "Intel 6 Series PCIE" rev 0xb5: msi
pci3 at ppb2 bus 3
ppb3 at pci0 dev 28 function 4 "Intel 6 Series PCIE" rev 0xb5: msi
pci4 at ppb3 bus 4
em2 at pci4 dev 0 function 0 "Intel 82574L" rev 0x00: msi, address
00:25:90:75:fa:ae
ehci1 at pci0 dev 29 function 0 "Intel 6 Series USB" rev 0x05: apic 2 int 23
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb4 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xa5
pci5 at ppb4 bus 5
vga1 at pci5 dev 3 function 0 "Matrox MGA G200eW" rev 0x0a
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 31 function 0 "Intel C202 LPC" rev 0x05
ahci0 at pci0 dev 31 function 2 "Intel 6 Series AHCI" rev 0x05: msi, AHCI 1.3
ahci0: port 0: 3.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, Patriot Torqx 2, S5FA> SCSI3 0/direct fixed
t10.ATA_Patriot_Torqx_2_32GB_SSD_65D80723140800003913
sd0: 30533MB, 512 bytes/sector, 62533296 sectors, thin
ichiic0 at pci0 dev 31 function 3 "Intel 6 Series SMBus" rev 0x05: apic 2 int 18
iic0 at ichiic0
sdtemp0 at iic0 addr 0x18: mcp98243
sdtemp1 at iic0 addr 0x19: mcp98243
sdtemp2 at iic0 addr 0x1a: mcp98243
sdtemp3 at iic0 addr 0x1b: mcp98243
spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM ECC PC3-10600 with thermal sensor
spdmem1 at iic0 addr 0x51: 2GB DDR3 SDRAM ECC PC3-10600 with thermal sensor
spdmem2 at iic0 addr 0x52: 2GB DDR3 SDRAM ECC PC3-10600 with thermal sensor
spdmem3 at iic0 addr 0x53: 2GB DDR3 SDRAM ECC PC3-10600 with thermal sensor
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
com2 at isa0 port 0x3e8/8 irq 5: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
wbsio0 at isa0 port 0x2e/2: NCT6776F rev 0x33
lm1 at wbsio0 port 0xa30/8: NCT6776F
uhub2 at uhub0 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
uhidev0 at uhub2 port 2 configuration 1 interface 0 "Winbond Electronics Corp
Hermon USB hidmouse Device" rev 1.10/0.01 addr 3
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
uhidev1 at uhub2 port 2 configuration 1 interface 1 "Winbond Electronics Corp
Hermon USB hidmouse Device" rev 1.10/0.01 addr 3
uhidev1: iclass 3/1
ukbd0 at uhidev1: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhub3 at uhub1 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (3d0ef89b4eac6ae6.a) swap on sd0b dump on sd0b
Automatic boot in progress: starting file system checks.
/dev/sd0a (3d0ef89b4eac6ae6.a): file system is clean; not checking
/dev/sd0l (3d0ef89b4eac6ae6.l): file system is clean; not checking
/dev/sd0d (3d0ef89b4eac6ae6.d): file system is clean; not checking
/dev/sd0f (3d0ef89b4eac6ae6.f): file system is clean; not checking
/dev/sd0g (3d0ef89b4eac6ae6.g): file system is clean; not checking
/dev/sd0h (3d0ef89b4eac6ae6.h): file system is clean; not checking
/dev/sd0j (3d0ef89b4eac6ae6.j): file system is clean; not checking
/dev/sd0i (3d0ef89b4eac6ae6.i): file system is clean; not checking
/dev/sd0e (3d0ef89b4eac6ae6.e): file system is clean; not checking
/dev/sd0k (3d0ef89b4eac6ae6.k): file system is clean; not checking
setting tty flags
pf enabled
net.inet.ip.forwarding: 0 -> 1
net.inet6.ip6.forwarding: 0 -> 1
net.inet.carp.preempt: 0 -> 1
net.inet.carp.log: 2 -> 6
ddb.panic: 1 -> 0
ddb.console: 0 -> 0
kern.pool_debug: 0 -> 0
starting network
add net 2a00:15a8:0:5300::/56: gateway ::1
carp: carp0 demoted group carp by 1 to 129 (carpdev)
carp: pfsync0 demoted group carp by 32 to 161 (pfsync init)
carp: pfsync0 demoted group pfsync by 32 to 32 (pfsync init)
carp: pfsync0 demoted group carp by 1 to 162 (pfsync bulk start)
carp: pfsync0 demoted group pfsync by 1 to 33 (pfsync bulk start)
starting early daemons: syslogd pflogd ntpd.
starting RPC daemons:.
savecore: no core dump
checking quotas: done.
clearing /tmp
starting pre-securelevel daemons:.
kern.securelevel: 0 -> 1
creating runtime link editor directory cache.
preserving editor files.
starting network daemons: sshd snmpd ospfd bgpd smtpd sndiod.
starting package daemons: nrpe ladvd dnsfilter.
starting local daemons: cron.
Mon Jan 11 21:45:24 CET 2016
OpenBSD/amd64 (foobar.ipv6only.org) (tty00)
login: [-- MARK -- Mon Jan 11 22:00:00 2016]
[-- MARK -- Tue Jan 12 00:00:00 2016]
panic: receive 1
Starting stack trace...
panic() at panic+0x10b
soreceive() at soreceive+0xc13
soo_read() at soo_read+0x22
dofilereadv() at dofilereadv+0x204
sys_read() at sys_read+0x89
syscall() at syscall+0x368
--- syscall (number 3) ---
end of kernel
end trace frame: 0x335ab121c00, count: 251
0x3361060027a:
End of stack trace.
syncing disks... 1 done
[-- MARK -- Tue Jan 12 02:00:00 2016]
