Hello bugs@,
I recently got a new laptop which for general use works great.
One of the few issues in general use is when I start up chromium/iridium
on a "bad moment"[1] which results first in a slowdown of X and
eventually in a full X hang or crash without a way to restart it.
If I'm lucky I can still reach my console, but an xdm restart won't
work.
This issue doesn't occur when running firefox or any other software I
use. I do use cwm, so in general my graphics stack isn't too demanding.
$ dmesg
OpenBSD 5.9 (GENERIC.MP) #1880: Sat Feb 20 16:48:33 MST 2016
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
RTC BIOS diagnostic error
bd<clock_battery,config_unit,memory_size,fixed_disk,invalid_time>
real mem = 4164415488 (3971MB)
avail mem = 4034002944 (3847MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xa9e3f000 (31 entries)
bios0: vendor Hewlett-Packard version "M73 Ver. 01.15" date 07/24/2015
bios0: Hewlett-Packard HP ProBook 450 G2
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP HPET APIC MCFG ASF! TCPA SSDT SSDT SLIC MSDM FPDT BGRT
SSDT SSDT SSDT SSDT SSDT
acpi0: wakeup devices LANC(S0) EHC1(S0) XHC_(S0) HS06(S0) PCIB(S5) RP03(S0)
NIC_(S0) RP04(S5) WNIC(S5) HST1(S5)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i5-5200U CPU @ 2.20GHz, 2095.44 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,RDSEED,ADX,SMAP,PT,SENSOR,ARAT
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM) i5-5200U CPU @ 2.20GHz, 2095.16 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,RDSEED,ADX,SMAP,PT,SENSOR,ARAT
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 1, core 0, package 0
cpu2 at mainbus0: apid 2 (application processor)
cpu2: Intel(R) Core(TM) i5-5200U CPU @ 2.20GHz, 2095.16 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,RDSEED,ADX,SMAP,PT,SENSOR,ARAT
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 0, core 1, package 0
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM) i5-5200U CPU @ 2.20GHz, 2095.16 MHz
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,RDSEED,ADX,SMAP,PT,SENSOR,ARAT
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 1, core 1, package 0
ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 20, 40 pins
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpiprt0 at acpi0: bus -1 (PEGP)
acpiprt1 at acpi0: bus 1 (RP01)
acpiprt2 at acpi0: bus 7 (RP02)
acpiprt3 at acpi0: bus 8 (RP03)
acpiprt4 at acpi0: bus 9 (RP04)
acpiprt5 at acpi0: bus -1 (RP07)
acpiprt6 at acpi0: bus -1 (RP08)
acpiprt7 at acpi0: bus 0 (PCI0)
acpiec0 at acpi0
acpicpu0 at acpi0: C3(200@506 mwait.1@0x60), C2(200@230 mwait.1@0x33),
C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C3(200@506 mwait.1@0x60), C2(200@230 mwait.1@0x33),
C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C3(200@506 mwait.1@0x60), C2(200@230 mwait.1@0x33),
C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C3(200@506 mwait.1@0x60), C2(200@230 mwait.1@0x33),
C1(1000@1 mwait.1), PSS
acpipwrres0 at acpi0: APPR, resource for HDEF
acpipwrres1 at acpi0: COMP, resource for COM1
acpipwrres2 at acpi0: LPP_, resource for LPT0
acpipwrres3 at acpi0: PXP2, resource for RP02
acpipwrres4 at acpi0: WRST
acpitz0 at acpi0: critical temperature is 128 degC
acpitz1 at acpi0: critical temperature is 128 degC
acpitz2 at acpi0: critical temperature is 128 degC
acpitz3 at acpi0: critical temperature is 128 degC
acpitz4 at acpi0: critical temperature is 128 degC
acpitz5 at acpi0: critical temperature is 128 degC
acpitz6 at acpi0: critical temperature is 128 degC
acpitz7 at acpi0: critical temperature is 128 degC
acpibat0 at acpi0: BAT0 model "Primary" serial 31217 2015/04/27 type LIon oem
"Hewlett-Packard"
acpibat1 at acpi0: BAT1 not present
acpiac0 at acpi0: AC unit offline
acpibtn0 at acpi0: SLPB
acpibtn1 at acpi0: LID_
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD01
cpu0: Enhanced SpeedStep 2095 MHz: speeds: 2201, 2200, 2100, 2000, 1800, 1700,
1600, 1500, 1300, 1200, 1100, 1000, 900, 700, 600, 500 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 5G Host" rev 0x09
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 5500" rev 0x09
drm0 at inteldrm0
inteldrm0: msi
inteldrm0: 1366x768
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
azalia0 at pci0 dev 3 function 0 "Intel Core 5G HD Audio" rev 0x09: msi
xhci0 at pci0 dev 20 function 0 "Intel 9 Series xHCI" rev 0x03: msi
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
"Intel 9 Series MEI" rev 0x03 at pci0 dev 22 function 0 not configured
azalia1 at pci0 dev 27 function 0 "Intel 9 Series HD Audio" rev 0x03: msi
azalia1: codecs: Realtek ALC282
audio0 at azalia1
ppb0 at pci0 dev 28 function 0 "Intel 9 Series PCIE" rev 0xe3
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 1 "Intel 9 Series PCIE" rev 0xe3: msi
pci2 at ppb1 bus 7
ppb2 at pci0 dev 28 function 2 "Intel 9 Series PCIE" rev 0xe3: msi
pci3 at ppb2 bus 8
re0 at pci3 dev 0 function 0 "Realtek 8168" rev 0x10: RTL8168GU/8111GU
(0x5080), msi, address 94:57:a5:ad:f0:62
rgephy0 at re0 phy 7: RTL8251 PHY, rev. 0
ppb3 at pci0 dev 28 function 3 "Intel 9 Series PCIE" rev 0xe3: msi
pci4 at ppb3 bus 9
iwm0 at pci4 dev 0 function 0 "Intel Dual Band Wireless AC 3160" rev 0x83, msi
ehci0 at pci0 dev 29 function 0 "Intel 9 Series USB" rev 0x03: apic 0 int 17
usb1 at ehci0: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
pcib0 at pci0 dev 31 function 0 "Intel 9 Series LPC" rev 0x03
ahci0 at pci0 dev 31 function 2 "Intel 9 Series AHCI" rev 0x03: msi, AHCI 1.3
ahci0: port 0: 6.0Gb/s
ahci0: port 1: 1.5Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, HGST HTS545050A7, GR2O> SCSI3 0/direct
fixed naa.5000cca7e3d44786
sd0: 476940MB, 512 bytes/sector, 976773168 sectors
cd0 at scsibus1 targ 1 lun 0: <hp, DVDRW DU8A6SH, DH61> ATAPI 5/cdrom removable
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
pms0: Synaptics touchpad, firmware 7.5
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
efifb at mainbus0 not configured
ugen0 at uhub0 port 5 "Validity Sensors product 0x003f" rev 1.10/1.04 addr 2
uvideo0 at uhub0 port 7 configuration 1 interface 0 "SunplusIT INC. HP HD
Webcam" rev 2.00/1.01 addr 3
video0 at uvideo0
uhub2 at uhub1 port 1 "Intel Rate Matching Hub" rev 2.00/0.03 addr 2
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 005> SCSI2 0/direct fixed
sd1: 468747MB, 512 bytes/sector, 959994653 sectors
root on sd1a (8df9e2252b2d92df.a) swap on sd1b dump on sd1b
iwm0: hw rev 0x160, fw ver 25.228 (API ver 9), address b4:6d:83:7d:e5:1a
error: [drm:pid16395:i915_context_is_banned] *ERROR* context hanging too fast,
declaring banned!
error: [drm:pid16395:i915_context_is_banned] *ERROR* context hanging too fast,
declaring banned!
error: [drm:pid16395:i915_context_is_banned] *ERROR* context hanging too fast,
declaring banned!
error: [drm:pid16395:i915_context_is_banned] *ERROR* context hanging too fast,
declaring banned!
[2]
# pcidump -v
Domain /dev/pci0:
0:0:0: Intel Core 5G Host
0x0000: Vendor ID: 8086 Product ID: 1604
0x0004: Command: 0006 Status: 2090
0x0008: Class: 06 Subclass: 00 Interface: 00 Revision: 09
0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 00
0x0010: BAR empty (00000000)
0x0014: BAR empty (00000000)
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 103c Product ID: 2248
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 00 Line: 00 Min Gnt: 00 Max Lat: 00
0x00e0: Capability 0x09: Vendor Specific
0:2:0: Intel HD Graphics 5500
0x0000: Vendor ID: 8086 Product ID: 1616
0x0004: Command: 0007 Status: 0090
0x0008: Class: 03 Subclass: 00 Interface: 00 Revision: 09
0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 00
0x0010: BAR mem 64bit addr: 0x00000000c0000000/0x01000000
0x0018: BAR mem prefetchable 64bit addr: 0x00000000b0000000/0x10000000
0x0020: BAR io addr: 0x00006000/0x0040
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 103c Product ID: 2248
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 01 Line: 0a Min Gnt: 00 Max Lat: 00
0x0090: Capability 0x05: Message Signaled Interrupts (MSI)
0x00d0: Capability 0x01: Power Management
State: D0
0x00a4: Capability 0x13: PCI Advanced Features
0:3:0: Intel Core 5G HD Audio
0x0000: Vendor ID: 8086 Product ID: 160c
0x0004: Command: 0006 Status: 0010
0x0008: Class: 04 Subclass: 03 Interface: 00 Revision: 09
0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 10
0x0010: BAR mem 64bit addr: 0x00000000c1410000/0x00004000
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 103c Product ID: 2248
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 01 Line: ff Min Gnt: 00 Max Lat: 00
0x0050: Capability 0x01: Power Management
State: D0
0x0060: Capability 0x05: Message Signaled Interrupts (MSI)
0x0070: Capability 0x10: PCI Express
0:20:0: Intel 9 Series xHCI
0x0000: Vendor ID: 8086 Product ID: 9cb1
0x0004: Command: 0006 Status: 0290
0x0008: Class: 0c Subclass: 03 Interface: 30 Revision: 03
0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 00
0x0010: BAR mem 64bit addr: 0x00000000c1400000/0x00010000
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 103c Product ID: 2248
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 01 Line: ff Min Gnt: 00 Max Lat: 00
0x0070: Capability 0x01: Power Management
State: D0
0x0080: Capability 0x05: Message Signaled Interrupts (MSI)
0:22:0: Intel 9 Series MEI
0x0000: Vendor ID: 8086 Product ID: 9cba
0x0004: Command: 0006 Status: 0010
0x0008: Class: 07 Subclass: 80 Interface: 00 Revision: 03
0x000c: BIST: 00 Header Type: 80 Latency Timer: 00 Cache Line Size: 00
0x0010: BAR mem 64bit addr: 0x00000000c141b000/0x00000020
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 103c Product ID: 2248
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 01 Line: ff Min Gnt: 00 Max Lat: 00
0x0050: Capability 0x01: Power Management
State: D0
0x008c: Capability 0x05: Message Signaled Interrupts (MSI)
0:27:0: Intel 9 Series HD Audio
0x0000: Vendor ID: 8086 Product ID: 9ca0
0x0004: Command: 0006 Status: 0010
0x0008: Class: 04 Subclass: 03 Interface: 00 Revision: 03
0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 10
0x0010: BAR mem 64bit addr: 0x00000000c1414000/0x00004000
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 103c Product ID: 2248
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 01 Line: ff Min Gnt: 00 Max Lat: 00
0x0050: Capability 0x01: Power Management
State: D0
0x0060: Capability 0x05: Message Signaled Interrupts (MSI)
0:28:0: Intel 9 Series PCIE
0x0000: Vendor ID: 8086 Product ID: 9c90
0x0004: Command: 0007 Status: 0010
0x0008: Class: 06 Subclass: 04 Interface: 00 Revision: e3
0x000c: BIST: 00 Header Type: 81 Latency Timer: 00 Cache Line Size: 10
0x0010: 00000000
0x0014: 00000000
0x0018: Primary Bus: 0 Secondary Bus: 1 Subordinate Bus: 6
Secondary Latency Timer: 00
0x001c: I/O Base: f0 I/O Limit: 00 Secondary Status: 2000
0x0020: Memory Base: c130 Memory Limit: c130
0x0024: Prefetch Memory Base: fff1 Prefetch Memory Limit: 0001
0x0028: Prefetch Memory Base Upper 32 Bits: ffffffff
0x002c: Prefetch Memory Limit Upper 32 Bits: 00000000
0x0030: I/O Base Upper 16 Bits: 0000 I/O Limit Upper 16 Bits: 0000
0x0038: Expansion ROM Base Address: 00000000
0x003c: Interrupt Pin: 01 Line: ff Bridge Control: 0000
0x0040: Capability 0x10: PCI Express
Link Speed: 2.5 / 5.0 GT/s Link Width: x0 / x1
0x0080: Capability 0x05: Message Signaled Interrupts (MSI)
0x0090: Capability 0x0d: PCI-PCI
0x00a0: Capability 0x01: Power Management
State: D0
0:28:1: Intel 9 Series PCIE
0x0000: Vendor ID: 8086 Product ID: 9c92
0x0004: Command: 0007 Status: 0010
0x0008: Class: 06 Subclass: 04 Interface: 00 Revision: e3
0x000c: BIST: 00 Header Type: 81 Latency Timer: 00 Cache Line Size: 10
0x0010: 00000000
0x0014: 00000000
0x0018: Primary Bus: 0 Secondary Bus: 7 Subordinate Bus: 7
Secondary Latency Timer: 00
0x001c: I/O Base: 40 I/O Limit: 50 Secondary Status: 2000
0x0020: Memory Base: c120 Memory Limit: c120
0x0024: Prefetch Memory Base: fff1 Prefetch Memory Limit: 0001
0x0028: Prefetch Memory Base Upper 32 Bits: ffffffff
0x002c: Prefetch Memory Limit Upper 32 Bits: 00000000
0x0030: I/O Base Upper 16 Bits: 0000 I/O Limit Upper 16 Bits: 0000
0x0038: Expansion ROM Base Address: 00000000
0x003c: Interrupt Pin: 02 Line: ff Bridge Control: 0000
0x0040: Capability 0x10: PCI Express
Link Speed: 2.5 / 5.0 GT/s Link Width: x0 / x1
0x0080: Capability 0x05: Message Signaled Interrupts (MSI)
0x0090: Capability 0x0d: PCI-PCI
0x00a0: Capability 0x01: Power Management
State: D0
0:28:2: Intel 9 Series PCIE
0x0000: Vendor ID: 8086 Product ID: 9c94
0x0004: Command: 0007 Status: 0010
0x0008: Class: 06 Subclass: 04 Interface: 00 Revision: e3
0x000c: BIST: 00 Header Type: 81 Latency Timer: 00 Cache Line Size: 10
0x0010: 00000000
0x0014: 00000000
0x0018: Primary Bus: 0 Secondary Bus: 8 Subordinate Bus: 8
Secondary Latency Timer: 00
0x001c: I/O Base: 30 I/O Limit: 30 Secondary Status: 0000
0x0020: Memory Base: c110 Memory Limit: c110
0x0024: Prefetch Memory Base: fff1 Prefetch Memory Limit: 0001
0x0028: Prefetch Memory Base Upper 32 Bits: ffffffff
0x002c: Prefetch Memory Limit Upper 32 Bits: 00000000
0x0030: I/O Base Upper 16 Bits: 0000 I/O Limit Upper 16 Bits: 0000
0x0038: Expansion ROM Base Address: 00000000
0x003c: Interrupt Pin: 03 Line: ff Bridge Control: 0000
0x0040: Capability 0x10: PCI Express
Link Speed: 2.5 / 5.0 GT/s Link Width: x1 / x1
0x0080: Capability 0x05: Message Signaled Interrupts (MSI)
0x0090: Capability 0x0d: PCI-PCI
0x00a0: Capability 0x01: Power Management
State: D0
0:28:3: Intel 9 Series PCIE
0x0000: Vendor ID: 8086 Product ID: 9c96
0x0004: Command: 0007 Status: 0010
0x0008: Class: 06 Subclass: 04 Interface: 00 Revision: e3
0x000c: BIST: 00 Header Type: 81 Latency Timer: 00 Cache Line Size: 10
0x0010: 00000000
0x0014: 00000000
0x0018: Primary Bus: 0 Secondary Bus: 9 Subordinate Bus: 9
Secondary Latency Timer: 00
0x001c: I/O Base: f0 I/O Limit: 00 Secondary Status: 0000
0x0020: Memory Base: c100 Memory Limit: c100
0x0024: Prefetch Memory Base: fff1 Prefetch Memory Limit: 0001
0x0028: Prefetch Memory Base Upper 32 Bits: ffffffff
0x002c: Prefetch Memory Limit Upper 32 Bits: 00000000
0x0030: I/O Base Upper 16 Bits: 0000 I/O Limit Upper 16 Bits: 0000
0x0038: Expansion ROM Base Address: 00000000
0x003c: Interrupt Pin: 04 Line: ff Bridge Control: 0000
0x0040: Capability 0x10: PCI Express
Link Speed: 2.5 / 5.0 GT/s Link Width: x1 / x1
0x0080: Capability 0x05: Message Signaled Interrupts (MSI)
0x0090: Capability 0x0d: PCI-PCI
0x00a0: Capability 0x01: Power Management
State: D0
0:29:0: Intel 9 Series USB
0x0000: Vendor ID: 8086 Product ID: 9ca6
0x0004: Command: 0006 Status: 0290
0x0008: Class: 0c Subclass: 03 Interface: 20 Revision: 03
0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 00
0x0010: BAR mem 32bit addr: 0xc1419000/0x00000400
0x0014: BAR empty (00000000)
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 103c Product ID: 2248
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 01 Line: ff Min Gnt: 00 Max Lat: 00
0x0050: Capability 0x01: Power Management
State: D0
0x0058: Capability 0x0a: Debug Port
0x0098: Capability 0x13: PCI Advanced Features
0:31:0: Intel 9 Series LPC
0x0000: Vendor ID: 8086 Product ID: 9cc3
0x0004: Command: 0007 Status: 0210
0x0008: Class: 06 Subclass: 01 Interface: 00 Revision: 03
0x000c: BIST: 00 Header Type: 80 Latency Timer: 00 Cache Line Size: 00
0x0010: BAR empty (00000000)
0x0014: BAR empty (00000000)
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 103c Product ID: 2248
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 00 Line: 00 Min Gnt: 00 Max Lat: 00
0x00e0: Capability 0x09: Vendor Specific
0:31:2: Intel 9 Series AHCI
0x0000: Vendor ID: 8086 Product ID: 9c83
0x0004: Command: 0007 Status: 02b0
0x0008: Class: 01 Subclass: 06 Interface: 01 Revision: 03
0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 00
0x0010: BAR io addr: 0x00006088/0x0008
0x0014: BAR io addr: 0x00006094/0x0004
0x0018: BAR io addr: 0x00006080/0x0008
0x001c: BAR io addr: 0x00006090/0x0004
0x0020: BAR io addr: 0x00006060/0x0020
0x0024: BAR mem 32bit addr: 0xc1418000/0x00000800
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 103c Product ID: 2248
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 02 Line: ff Min Gnt: 00 Max Lat: 00
0x0080: Capability 0x05: Message Signaled Interrupts (MSI)
0x0070: Capability 0x01: Power Management
State: D0
0x00a8: Capability 0x12: SATA
8:0:0: Realtek 8168
0x0000: Vendor ID: 10ec Product ID: 8168
0x0004: Command: 0007 Status: 0010
0x0008: Class: 02 Subclass: 00 Interface: 00 Revision: 10
0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 10
0x0010: BAR io addr: 0x00003000/0x0100
0x0014: BAR empty (00000000)
0x0018: BAR mem 64bit addr: 0x00000000c1104000/0x00001000
0x0020: BAR mem 64bit addr: 0x00000000c1100000/0x00004000
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 103c Product ID: 2248
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 01 Line: ff Min Gnt: 00 Max Lat: 00
0x0040: Capability 0x01: Power Management
State: D0 PME# enabled
0x0050: Capability 0x05: Message Signaled Interrupts (MSI)
0x0070: Capability 0x10: PCI Express
Link Speed: 2.5 / 2.5 GT/s Link Width: x1 / x1
0x00b0: Capability 0x11: Extended Message Signaled Interrupts (MSI-X)
0x00d0: Capability 0x03: Vital Product Data (VPD)
9:0:0: Intel Dual Band Wireless AC 3160
0x0000: Vendor ID: 8086 Product ID: 08b3
0x0004: Command: 0006 Status: 0010
0x0008: Class: 02 Subclass: 80 Interface: 00 Revision: 83
0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 10
0x0010: BAR mem 64bit addr: 0x00000000c1000000/0x00002000
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 8086 Product ID: 0070
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 01 Line: ff Min Gnt: 00 Max Lat: 00
0x00c8: Capability 0x01: Power Management
State: D0
0x00d0: Capability 0x05: Message Signaled Interrupts (MSI)
0x0040: Capability 0x10: PCI Express
Link Speed: 2.5 / 2.5 GT/s Link Width: x1 / x1
$ cat /var/log/Xorg.0.log.old
[ 1155.755] (WW) checkDevMem: failed to open /dev/xf86 and /dev/mem
(Operation not permitted)
Check that you have set 'machdep.allowaperture=1'
in /etc/sysctl.conf and reboot your machine
refer to xf86(4) for details
[ 1155.755] linear framebuffer access unavailable
[ 1155.762] (--) Using wscons driver on /dev/ttyC4 in pcvt compatibility mode
(version 3.32)
[ 1155.767]
X.Org X Server 1.17.4
Release Date: 2015-10-28
[ 1155.767] X Protocol Version 11, Revision 0
[ 1155.767] Build Operating System: OpenBSD 5.9 amd64
[ 1155.767] Current Operating System: OpenBSD harrypotter.imperialat.at 5.9
GENERIC.MP#1880 amd64
[ 1155.768] Build Date: 20 February 2016 05:10:56PM
[ 1155.768]
[ 1155.768] Current version of pixman: 0.32.8
[ 1155.768] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 1155.768] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 1155.768] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Feb 23 07:26:18
2016
[ 1155.768] (==) Using system config directory
"/usr/X11R6/share/X11/xorg.conf.d"
[ 1155.768] (==) No Layout section. Using the first Screen section.
[ 1155.768] (==) No screen section available. Using defaults.
[ 1155.768] (**) |-->Screen "Default Screen Section" (0)
[ 1155.768] (**) | |-->Monitor "<default monitor>"
[ 1155.768] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 1155.768] (==) Disabling SIGIO handlers for input devices
[ 1155.768] (==) Automatically adding devices
[ 1155.768] (==) Automatically enabling devices
[ 1155.768] (==) Not automatically adding GPU devices
[ 1155.768] (==) FontPath set to:
/usr/X11R6/lib/X11/fonts/misc/,
/usr/X11R6/lib/X11/fonts/TTF/,
/usr/X11R6/lib/X11/fonts/OTF/,
/usr/X11R6/lib/X11/fonts/Type1/,
/usr/X11R6/lib/X11/fonts/100dpi/,
/usr/X11R6/lib/X11/fonts/75dpi/
[ 1155.768] (==) ModulePath set to "/usr/X11R6/lib/modules"
[ 1155.768] (II) The server relies on wscons to provide the list of input
devices.
If no devices become available, reconfigure wscons or disable
AutoAddDevices.
[ 1155.768] (II) Loader magic: 0x3deee2324a0
[ 1155.768] (II) Module ABI versions:
[ 1155.768] X.Org ANSI C Emulation: 0.4
[ 1155.768] X.Org Video Driver: 19.0
[ 1155.768] X.Org XInput driver : 21.0
[ 1155.768] X.Org Server Extension : 9.0
[ 1155.768] (--) PCI:*(0:0:2:0) 8086:1616:103c:2248 rev 9, Mem @
0xc0000000/16777216, 0xb0000000/268435456, I/O @ 0x00006000/64
[ 1155.768] (II) LoadModule: "glx"
[ 1155.769] (II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
[ 1155.772] (II) Module glx: vendor="X.Org Foundation"
[ 1155.772] compiled for 1.17.4, module version = 1.0.0
[ 1155.772] ABI class: X.Org Server Extension, version 9.0
[ 1155.772] (==) AIGLX enabled
[ 1155.772] (==) Matched modesetting as autoconfigured driver 0
[ 1155.772] (==) Matched vesa as autoconfigured driver 1
[ 1155.772] (==) Assigned the driver to the xf86ConfigLayout
[ 1155.772] (II) LoadModule: "modesetting"
[ 1155.772] (II) Loading /usr/X11R6/lib/modules/drivers/modesetting_drv.so
[ 1155.773] (II) Module modesetting: vendor="X.Org Foundation"
[ 1155.773] compiled for 1.17.4, module version = 1.17.4
[ 1155.773] Module class: X.Org Video Driver
[ 1155.773] ABI class: X.Org Video Driver, version 19.0
[ 1155.773] (II) LoadModule: "vesa"
[ 1155.773] (II) Loading /usr/X11R6/lib/modules/drivers/vesa_drv.so
[ 1155.773] (II) Module vesa: vendor="X.Org Foundation"
[ 1155.773] compiled for 1.17.4, module version = 2.3.3
[ 1155.773] Module class: X.Org Video Driver
[ 1155.773] ABI class: X.Org Video Driver, version 19.0
[ 1155.773] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 1155.773] (II) VESA: driver for VESA chipsets: vesa
[ 1155.773] (**) modeset(0): claimed PCI slot 0@0:2:0
[ 1155.773] (II) modeset(0): using default device
[ 1155.773] (WW) Falling back to old probe method for vesa
[ 1155.774] (II) modeset(0): Creating default Display subsection in Screen
section
"Default Screen Section" for depth/fbbpp 24/32
[ 1155.774] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[ 1155.774] (==) modeset(0): RGB weight 888
[ 1155.774] (==) modeset(0): Default visual is TrueColor
[ 1155.774] (II) Loading sub module "glamoregl"
[ 1155.774] (II) LoadModule: "glamoregl"
[ 1155.775] (II) Loading /usr/X11R6/lib/modules/libglamoregl.so
[ 1155.782] (II) Module glamoregl: vendor="X.Org Foundation"
[ 1155.782] compiled for 1.17.4, module version = 1.0.0
[ 1155.782] ABI class: X.Org ANSI C Emulation, version 0.4
[ 1155.782] (II) glamor: OpenGL accelerated X.org driver based.
[ 1155.800] (II) glamor: EGL version 1.4 (DRI2):
[ 1155.804] (II) modeset(0): glamor initialized
[ 1155.804] (II) Loading sub module "dri2"
[ 1155.804] (II) LoadModule: "dri2"
[ 1155.804] (II) Module "dri2" already built-in
[ 1155.804] (II) modeset(0): Output eDP-0 has no monitor section
[ 1155.805] (II) modeset(0): Output HDMI-0 has no monitor section
[ 1155.806] (II) modeset(0): Output DisplayPort-0 has no monitor section
[ 1155.807] (II) modeset(0): Output HDMI-1 has no monitor section
[ 1155.807] (II) modeset(0): EDID for output eDP-0
[ 1155.807] (II) modeset(0): Manufacturer: CMN Model: 15be Serial#: 0
[ 1155.807] (II) modeset(0): Year: 2013 Week: 48
[ 1155.807] (II) modeset(0): EDID Version: 1.4
[ 1155.807] (II) modeset(0): Digital Display Input
[ 1155.807] (II) modeset(0): 6 bits per channel
[ 1155.807] (II) modeset(0): Digital interface is DisplayPort
[ 1155.807] (II) modeset(0): Max Image Size [cm]: horiz.: 34 vert.: 19
[ 1155.807] (II) modeset(0): Gamma: 2.20
[ 1155.807] (II) modeset(0): No DPMS capabilities specified
[ 1155.807] (II) modeset(0): Supported color encodings: RGB 4:4:4
[ 1155.807] (II) modeset(0): First detailed timing is preferred mode
[ 1155.807] (II) modeset(0): Preferred mode is native pixel format and refresh
rate
[ 1155.807] (II) modeset(0): redX: 0.573 redY: 0.346 greenX: 0.341 greenY:
0.595
[ 1155.807] (II) modeset(0): blueX: 0.161 blueY: 0.115 whiteX: 0.313 whiteY:
0.329
[ 1155.807] (II) modeset(0): Manufacturer's mask: 0
[ 1155.807] (II) modeset(0): Supported detailed timing:
[ 1155.807] (II) modeset(0): clock: 76.4 MHz Image Size: 344 x 193 mm
[ 1155.807] (II) modeset(0): h_active: 1366 h_sync: 1434 h_sync_end 1479
h_blank_end 1592 h_border: 0
[ 1155.807] (II) modeset(0): v_active: 768 v_sync: 772 v_sync_end 779
v_blanking: 800 v_border: 0
[ 1155.807] (II) modeset(0): Supported detailed timing:
[ 1155.807] (II) modeset(0): clock: 51.0 MHz Image Size: 344 x 193 mm
[ 1155.807] (II) modeset(0): h_active: 1366 h_sync: 1434 h_sync_end 1479
h_blank_end 1592 h_border: 0
[ 1155.807] (II) modeset(0): v_active: 768 v_sync: 772 v_sync_end 779
v_blanking: 800 v_border: 0
[ 1155.807] (II) modeset(0): Unknown vendor-specific block 2
[ 1155.807] (II) modeset(0): EDID (in hex):
[ 1155.807] (II) modeset(0): 00ffffffffffff000daebe1500000000
[ 1155.807] (II) modeset(0): 301701049522137802e5659258579829
[ 1155.807] (II) modeset(0): 1d505400000001010101010101010101
[ 1155.807] (II) modeset(0): 010101010101da1d56e250002030442d
[ 1155.807] (II) modeset(0): 470058c11000001ae71356e250002030
[ 1155.807] (II) modeset(0): 442d470058c11000001a000000000000
[ 1155.807] (II) modeset(0): 00000000000000000000000000000002
[ 1155.807] (II) modeset(0): 000c42ff0c3c6e12101c74000000007d
[ 1155.807] (II) modeset(0): Printing probed modes for output eDP-0
[ 1155.807] (II) modeset(0): Modeline "1366x768"x60.0 76.42 1366 1434 1479
1592 768 772 779 800 +hsync -vsync (48.0 kHz eP)
[ 1155.807] (II) modeset(0): Modeline "1366x768"x40.0 50.95 1366 1434 1479
1592 768 772 779 800 +hsync -vsync (32.0 kHz e)
[ 1155.807] (II) modeset(0): Modeline "1024x768"x120.1 133.47 1024 1100 1212
1400 768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[ 1155.807] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184
1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 1155.807] (II) modeset(0): Modeline "960x720"x120.0 117.00 960 1024 1128
1300 720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[ 1155.807] (II) modeset(0): Modeline "928x696"x120.1 109.15 928 976 1088
1264 696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[ 1155.807] (II) modeset(0): Modeline "896x672"x120.0 102.40 896 960 1060
1224 672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[ 1155.807] (II) modeset(0): Modeline "800x600"x120.0 81.00 800 832 928
1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[ 1155.807] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056
600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 1155.807] (II) modeset(0): Modeline "800x600"x56.2 36.00 800 824 896 1024
600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 1155.807] (II) modeset(0): Modeline "700x525"x120.0 61.00 700 744 820 940
525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[ 1155.807] (II) modeset(0): Modeline "640x512"x120.0 54.00 640 664 720 844
512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[ 1155.807] (II) modeset(0): Modeline "640x480"x120.0 54.00 640 688 744 900
480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[ 1155.807] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800
480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 1155.807] (II) modeset(0): Modeline "512x384"x120.0 32.50 512 524 592 672
384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[ 1155.807] (II) modeset(0): Modeline "400x300"x120.6 20.00 400 420 484 528
300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[ 1155.807] (II) modeset(0): Modeline "400x300"x112.7 18.00 400 412 448 512
300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[ 1155.807] (II) modeset(0): Modeline "320x240"x120.1 12.59 320 328 376 400
240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[ 1155.808] (II) modeset(0): EDID for output HDMI-0
[ 1155.808] (II) modeset(0): EDID for output DisplayPort-0
[ 1155.809] (II) modeset(0): EDID for output HDMI-1
[ 1155.809] (II) modeset(0): Output eDP-0 connected
[ 1155.809] (II) modeset(0): Output HDMI-0 disconnected
[ 1155.809] (II) modeset(0): Output DisplayPort-0 disconnected
[ 1155.809] (II) modeset(0): Output HDMI-1 disconnected
[ 1155.809] (II) modeset(0): Using exact sizes for initial modes
[ 1155.809] (II) modeset(0): Output eDP-0 using initial mode 1366x768
[ 1155.809] (II) modeset(0): Using default gamma of (1.0, 1.0, 1.0) unless
otherwise stated.
[ 1155.810] (==) modeset(0): DPI set to (96, 96)
[ 1155.810] (II) Loading sub module "fb"
[ 1155.810] (II) LoadModule: "fb"
[ 1155.810] (II) Loading /usr/X11R6/lib/modules/libfb.so
[ 1155.811] (II) Module fb: vendor="X.Org Foundation"
[ 1155.811] compiled for 1.17.4, module version = 1.0.0
[ 1155.811] ABI class: X.Org ANSI C Emulation, version 0.4
[ 1155.811] (II) UnloadModule: "vesa"
[ 1155.811] (II) Unloading vesa
[ 1155.811] (==) Depth 24 pixmap format is 32 bpp
[ 1155.978] (==) modeset(0): Backing store enabled
[ 1155.978] (==) modeset(0): Silken mouse disabled
[ 1155.978] (II) modeset(0): RandR 1.2 enabled, ignore the following RandR
disabled message.
[ 1155.978] (==) modeset(0): DPMS enabled
[ 1155.978] (WW) modeset(0): DRI2: glamor lacks support for pixmap
import/export
[ 1155.979] (II) modeset(0): [DRI2] Setup complete
[ 1155.979] (II) modeset(0): [DRI2] DRI driver: i965
[ 1155.979] (II) modeset(0): [DRI2] VDPAU driver: i965
[ 1155.984] (--) RandR disabled
[ 1156.006] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 1156.006] (II) AIGLX: enabled GLX_ARB_create_context
[ 1156.006] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 1156.006] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 1156.006] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 1156.006] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 1156.006] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 1156.006] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 1156.006] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 1156.006] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[ 1156.006] (II) AIGLX: Loaded and initialized i965
[ 1156.006] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 1156.013] (II) modeset(0): Setting screen physical size to 361 x 203
[ 1161.734] (II) config/wscons: checking input device /dev/wskbd
[ 1161.734] (II) wskbd: using layout us
[ 1161.734] (II) LoadModule: "kbd"
[ 1161.735] (II) Loading /usr/X11R6/lib/modules/input/kbd_drv.so
[ 1161.735] (II) Module kbd: vendor="X.Org Foundation"
[ 1161.735] compiled for 1.17.4, module version = 1.8.1
[ 1161.735] Module class: X.Org XInput Driver
[ 1161.735] ABI class: X.Org XInput driver, version 21.0
[ 1161.735] (II) Using input driver 'kbd' for '/dev/wskbd'
[ 1161.735] (**) /dev/wskbd: always reports core events
[ 1161.735] (**) /dev/wskbd: always reports core events
[ 1161.735] (**) Option "Protocol" "standard"
[ 1161.735] (**) Option "XkbRules" "base"
[ 1161.735] (**) Option "XkbModel" "pc105"
[ 1161.735] (**) Option "XkbLayout" "us"
[ 1161.735] (II) XINPUT: Adding extended input device "/dev/wskbd" (type:
KEYBOARD, id 6)
[ 1162.220] (II) config/wscons: checking input device /dev/wsmouse0
[ 1162.220] (**) /dev/wsmouse0: Applying InputClass "touchpad catchall"
[ 1162.220] (**) /dev/wsmouse0: Applying InputClass "Default clickpad buttons"
[ 1162.220] (II) LoadModule: "synaptics"
[ 1162.221] (II) Loading /usr/X11R6/lib/modules/input/synaptics_drv.so
[ 1162.221] (II) Module synaptics: vendor="X.Org Foundation"
[ 1162.221] compiled for 1.17.4, module version = 1.8.3
[ 1162.221] Module class: X.Org XInput Driver
[ 1162.221] ABI class: X.Org XInput driver, version 21.0
[ 1162.221] (II) Using input driver 'synaptics' for '/dev/wsmouse0'
[ 1162.221] (**) /dev/wsmouse0: always reports core events
[ 1162.221] (**) Option "Device" "/dev/wsmouse0"
[ 1163.117] (--) synaptics: /dev/wsmouse0: x-axis range 1472 - 5716 resolution
46
[ 1163.117] (--) synaptics: /dev/wsmouse0: y-axis range 1408 - 4886 resolution
80
[ 1163.117] (**) /dev/wsmouse0: always reports core events
[ 1163.148] (II) XINPUT: Adding extended input device "/dev/wsmouse0" (type:
TOUCHPAD, id 7)
[ 1163.149] (**) synaptics: /dev/wsmouse0: (accel) MinSpeed is now constant
deceleration 2.5
[ 1163.149] (**) synaptics: /dev/wsmouse0: (accel) MaxSpeed is now 1.75
[ 1163.149] (**) synaptics: /dev/wsmouse0: (accel) AccelFactor is now 0.036
[ 1163.149] (**) /dev/wsmouse0: (accel) keeping acceleration scheme 1
[ 1163.149] (**) /dev/wsmouse0: (accel) acceleration profile 1
[ 1163.149] (**) /dev/wsmouse0: (accel) acceleration factor: 2.000
[ 1163.149] (**) /dev/wsmouse0: (accel) acceleration threshold: 4
[ 1163.579] (II) config/wscons: checking input device /dev/wsmouse
[ 1163.579] (II) LoadModule: "ws"
[ 1163.581] (II) Loading /usr/X11R6/lib/modules/input/ws_drv.so
[ 1163.582] (II) Module ws: vendor="X.Org Foundation"
[ 1163.582] compiled for 1.17.4, module version = 1.3.0
[ 1163.582] Module class: X.Org XInput Driver
[ 1163.582] ABI class: X.Org XInput driver, version 21.0
[ 1163.582] (II) Using input driver 'ws' for '/dev/wsmouse'
[ 1163.582] (**) /dev/wsmouse: always reports core events
[ 1163.582] (II) ws: /dev/wsmouse: debuglevel 0
[ 1163.582] (**) Option "Device" "/dev/wsmouse"
[ 1163.582] (**) ws: /dev/wsmouse: ZAxisMapping: buttons 4 and 5
[ 1163.582] (**) ws: /dev/wsmouse: WAxisMapping: buttons 6 and 7
[ 1163.582] (**) ws: /dev/wsmouse: associated screen: 0
[ 1163.582] (II) ws: /dev/wsmouse: minimum x position: 0
[ 1163.582] (II) ws: /dev/wsmouse: maximum x position: 1365
[ 1163.582] (II) ws: /dev/wsmouse: minimum y position: 0
[ 1163.582] (II) ws: /dev/wsmouse: maximum y position: 767
[ 1163.582] (==) ws: /dev/wsmouse: Buttons: 7
[ 1163.582] (**) ws: /dev/wsmouse: YAxisMapping: buttons 4 and 5
[ 1163.582] (II) XINPUT: Adding extended input device "/dev/wsmouse" (type:
MOUSE, id 8)
[ 1163.583] (**) /dev/wsmouse: (accel) keeping acceleration scheme 1
[ 1163.583] (**) /dev/wsmouse: (accel) acceleration profile 0
[ 1163.583] (**) /dev/wsmouse: (accel) acceleration factor: 2.000
[ 1163.583] (**) /dev/wsmouse: (accel) acceleration threshold: 4
[ 1169.645] Failed to switch from vt05 to vt01: Device busy
[ 1169.645] Failed to switch from vt05 to vt01: Device busy
[ 1170.138] (II) AIGLX: Suspending AIGLX clients for VT switch
[1] whatever that may mean, it happens once every couple of startups.
[2] sometimes this error is preceded by:
error: [drm:pid31665:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed...
render ring idle
but I could not reproduce this message during the creation of this bug
report.
