Hi All,

I am running OpenBSD 5.8, and tried 5.9 as well, on a SuperMicro PDSMi which 
has an Intel 82573E.
For some reason networking just stops working after a random amount of time and 
usually happens when I SSH-ed into the machine.
When connected to the console it seems to be working longer. I am testing this 
by pinging an IP address on the local subnet.

Unfortunately I can not find anything different from an interface perspective, 
subnet perspective and nothing appears in the logs.
The problem goes away, temporarily, when I bounce the interface on the switch.

How can I best troubleshoot the cause?

# dmesg
em0 at pci4 dev 0 function 0 "Intel 82573E" rev 0x03: msi, address 
00:30:48:96:42:06

# pcidump -v
13:0:0: Intel 82573E
       0x0000: Vendor ID: 8086 Product ID: 108c
       0x0004: Command: 0107 Status: 0010
       0x0008: Class: 02 Subclass: 00 Interface: 00 Revision: 03
       0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 10
       0x0010: BAR mem 32bit addr: 0xe8a00000/0x00020000
       0x0014: BAR empty (00000000)
       0x0018: BAR io addr: 0x00005000/0x0020
       0x001c: BAR empty (00000000)
       0x0020: BAR empty (00000000)
       0x0024: BAR empty (00000000)
       0x0028: Cardbus CIS: 00000000
       0x002c: Subsystem Vendor ID: 15d9 Product ID: 108c
       0x0030: Expansion ROM Base Address: 00000000
       0x0038: 00000000
       0x003c: Interrupt Pin: 01 Line: 0b Min Gnt: 00 Max Lat: 00
       0x00c8: Capability 0x01: Power Management
       0x00d0: Capability 0x05: Message Signaled Interrupts (MSI)
       0x00e0: Capability 0x10: PCI Express
               Link Speed: 2.5 / 2.5 GT/s Link Width: x1 / x1

# ifconfig em0
em0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        lladdr 00:30:48:96:42:06
        priority: 0
        groups: egress
        media: Ethernet autoselect (1000baseT 
full-duplex,master,rxpause,txpause)
        status: active
        inet <ip> netmask 0xffffff00 broadcast 46.23.86.255

# netstat -nr
Internet:
Destination        Gateway            Flags   Refs      Use   Mtu  Prio Iface
default            <ip>         UGS        3       37     -     8 em0  
<net>/24        46.23.86.132       UC         1        0     -     8 em0  
<ip>         02:e0:52:9c:3c:56  UHLc       1        0     -     8 em0  
<ip>       00:30:48:96:42:06  HLl        0        0     -     1 lo0  
<ip>       <ip>       UHb        0        0     -     1 em0  
127/8              127.0.0.1          UGRS       0        0 32768     8 lo0  
127.0.0.1          127.0.0.1          UHl        1        0 32768     1 lo0  
224/4              127.0.0.1          URS        0        0 32768     8 lo0  

Thanx!

Mischa


Reply via email to