On 09/04/16 12:04, Mark Kettenis wrote:
From: Pekka Niiranen <[email protected]>
Date: Sat, 9 Apr 2016 11:33:55 +0300
r600_cp: Failed to load firmware "radeon-palm_pfp"
error: [drm:pid0:evergreen_startup] *ERROR* Failed to load firmware!
This means you don't have the radeon firmware installed. You could
try installing 5.8, installing the firmware (should happen
automatically) and then upgrade to 5.9. If that works, please let me
know, and I'll try to dig a bit deeper.
Cheers,
Mark
The radeon firmware in v5.8 loaded automatically on second boot
when I started the machine to do upgrade.
I did manual install from USB stick (install59.fs) according to
http://www.openbsd.org/faq/upgrade59.html#NoInstKern
The radeon firmware got updated from 20131002p0 => 20150927.
The USB mouse still gives console errors.
---------------------------------------------------
OpenBSD 5.9 (GENERIC) #1761: Fri Feb 26 01:15:04 MST 2016
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC
RTC BIOS diagnostic error 80<clock_battery>
real mem = 4115722240 (3925MB)
avail mem = 3986825216 (3802MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xea840 (41 entries)
bios0: vendor Phoenix Technologies Ltd. version "3.0E" date 07/29/2013
bios0: WYSE D CLASS
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP HPET APIC MCFG SBST UEFI UEFI SSDT SSDT UEFI
acpi0: wakeup devices PB4_(S4) PB5_(S4) PB6_(S4) PB7_(S4) OHC1(S4)
EHC1(S4) OHC2(S4) EHC2(S4) OHC3(S4) EHC3(S4) OHC4(S4) SBAZ(S4) KBC0(S3)
MSE0(S3) P2P_(S5) SPB0(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpihpet0 at acpi0: 14318180 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD G-T48E Processor, 1398.16 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,SSSE3,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1GB,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,IBS,SKINIT,ITSC
cpu0: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 512KB
64b/line 16-way L2 cache
cpu0: 8 4MB entries fully associative
cpu0: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 199MHz
cpu0: mwait min=64, max=64, IBE
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 21, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 2
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PB4_)
acpiprt2 at acpi0: bus -1 (PB5_)
acpiprt3 at acpi0: bus -1 (PB6_)
acpiprt4 at acpi0: bus -1 (PB7_)
acpiprt5 at acpi0: bus 1 (P2P_)
acpiprt6 at acpi0: bus 2 (SPB0)
acpiprt7 at acpi0: bus 4 (SPB1)
acpiprt8 at acpi0: bus -1 (SPB2)
acpiprt9 at acpi0: bus -1 (SPB3)
acpicpu0 at acpi0: C1(@1 halt!)
acpipwrres0 at acpi0: P0L0, resource for Z0F0
acpipwrres1 at acpi0: P0L1, resource for Z0F1
acpipwrres2 at acpi0: P0L2, resource for Z0F2
acpipwrres3 at acpi0: P0L3, resource for Z0F3
acpitz0 at acpi0: critical temperature is 115 degC
acpibtn0 at acpi0: PWRB
acpiac0 at acpi0: AC unit online
acpivideo0 at acpi0: VGA_
acpivideo1 at acpi0: VGA_
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "AMD AMD64 14h Host" rev 0x00
radeondrm0 at pci0 dev 1 function 0 "ATI Radeon HD 6250" rev 0x00
drm0 at radeondrm0
radeondrm0: msi
azalia0 at pci0 dev 1 function 1 "ATI Radeon HD 6310 HD Audio" rev 0x00: msi
azalia0: no supported codecs
ahci0 at pci0 dev 17 function 0 "ATI SBx00 SATA" rev 0x00: apic 2 int
19, AHCI 1.2
ahci0: port 0: 3.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, 16GB SATA Flash, SFDD> SCSI3
0/direct fixed t10.ATA_16GB_SATA_Flash_Drive_B05144513007000002E0
sd0: 15272MB, 512 bytes/sector, 31277232 sectors, thin
ohci0 at pci0 dev 18 function 0 "ATI SB700 USB" rev 0x00: apic 2 int 18,
version 1.0, legacy support
ehci0 at pci0 dev 18 function 2 "ATI SB700 USB2" rev 0x00: apic 2 int 17
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "ATI EHCI root hub" rev 2.00/1.00 addr 1
ohci1 at pci0 dev 19 function 0 "ATI SB700 USB" rev 0x00: apic 2 int 18,
version 1.0, legacy support
ehci1 at pci0 dev 19 function 2 "ATI SB700 USB2" rev 0x00: apic 2 int 17
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "ATI EHCI root hub" rev 2.00/1.00 addr 1
piixpm0 at pci0 dev 20 function 0 "ATI SBx00 SMBus" rev 0x42: polling
iic0 at piixpm0
spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-12800 SO-DIMM
azalia1 at pci0 dev 20 function 2 "ATI SBx00 HD Audio" rev 0x40: apic 2
int 16
azalia1: codecs: Realtek ALC269
audio0 at azalia1
pcib0 at pci0 dev 20 function 3 "ATI SB700 ISA" rev 0x40
ppb0 at pci0 dev 20 function 4 "ATI SB600 PCI" rev 0x40
pci1 at ppb0 bus 1
ohci2 at pci0 dev 20 function 5 "ATI SB700 USB" rev 0x00: apic 2 int 18,
version 1.0, legacy support
ppb1 at pci0 dev 21 function 0 "ATI SB800 PCIE" rev 0x00
pci2 at ppb1 bus 2
ppb2 at pci0 dev 21 function 1 "ATI SB800 PCIE" rev 0x00
pci3 at ppb2 bus 4
re0 at pci3 dev 0 function 0 "Realtek 8168" rev 0x06: RTL8168E/8111E-VL
(0x2c80), msi, address 00:80:64:d6:48:e3
rgephy0 at re0 phy 7: RTL8169S/8110S/8211 PHY, rev. 5
ohci3 at pci0 dev 22 function 0 "ATI SB700 USB" rev 0x00: apic 2 int 18,
version 1.0, legacy support
ehci2 at pci0 dev 22 function 2 "ATI SB700 USB2" rev 0x00: apic 2 int 17
usb2 at ehci2: USB revision 2.0
uhub2 at usb2 "ATI EHCI root hub" rev 2.00/1.00 addr 1
pchb1 at pci0 dev 24 function 0 "AMD AMD64 14h Link Cfg" rev 0x43
pchb2 at pci0 dev 24 function 1 "AMD AMD64 14h Address Map" rev 0x00
pchb3 at pci0 dev 24 function 2 "AMD AMD64 14h DRAM Cfg" rev 0x00
km0 at pci0 dev 24 function 3 "AMD AMD64 14h Misc Cfg" rev 0x00
pchb4 at pci0 dev 24 function 4 "AMD AMD64 14h CPU Power" rev 0x00
pchb5 at pci0 dev 24 function 5 "AMD AMD64 14h Reserved" rev 0x00
pchb6 at pci0 dev 24 function 6 "AMD AMD64 14h NB Power" rev 0x00
pchb7 at pci0 dev 24 function 7 "AMD AMD64 14h Reserved" rev 0x00
usb3 at ohci0: USB revision 1.0
uhub3 at usb3 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb4 at ohci1: USB revision 1.0
uhub4 at usb4 "ATI OHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
it0 at isa0 port 0x2e/2: IT8721F rev 3, EC port 0x290
usb5 at ohci2: USB revision 1.0
uhub5 at usb5 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb6 at ohci3: USB revision 1.0
uhub6 at usb6 "ATI OHCI root hub" rev 1.00/1.00 addr 1
uhidev0 at uhub4 port 2 configuration 1 interface 0 "Dell Dell USB Entry
Keyboard" rev 1.10/1.15 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
uhidev1 at uhub4 port 3 configuration 1 interface 0 "Logitech USB
Optical Mouse" rev 2.00/72.00 addr 3
uhidev1: iclass 3/1
ums0 at uhidev1: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (df91e3c0e5904e02.a) swap on sd0b dump on sd0b
radeondrm0: 1280x1024
wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using wskbd0
wskbd1: connecting to wsdisplay0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
-----------------------------------------------------------
I attached USB mouse and get repeating console messages:
--------------------------------------------------------
wsmouse0 detached
ums0 detached
uhidev1 detached
uhidev1 at uhub4 port 3 configuration 1 interface 0 "Logitech USB
Optical Mouse" rev 2.00/72.00 addr 3
uhidev1: iclass 3/1
ums0 at uhidev1: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
wsmouse0 detached
ums0 detached
uhidev1 detached
uhidev1 at uhub4 port 3 configuration 1 interface 0 "Logitech USB
Optical Mouse" rev 2.00/72.00 addr 3
uhidev1: iclass 3/1
ums0 at uhidev1: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
$
