On Thu, Apr 21, 2016 at 01:22:40PM +0100, Stuart Henderson wrote: > If the bootloader sets up a serial console, I can no longer get X to > start: > > [ 138.658] (--) checkDevMem: using aperture driver /dev/xf86 > [ 138.738] (EE) > Fatal server error: > [ 138.738] (EE) xf86OpenConsole: No console driver found > Supported drivers: wscons > Check your kernel's console driver configuration and /dev entries(EE) > [ 138.738] (EE) > Please consult the The X.Org Foundation support > at http://wiki.x.org > for help. > [ 138.738] (EE) Please also check the log file at "/var/log/Xorg.0.log" for > additional information. > [ 138.738] (EE) > [ 138.739] (EE) Server terminated with error (1). Closing log file. > > Any ideas what it was that might have broken this?
Very probably the switch to native WSCONS support in the X server, and more precisely the fact that the X server now uses sysctl to figure out what is the console device to open. I need to tink a bit on a good solution... > > OpenBSD 5.9-current (ARTLESS.MP) #6: Thu Apr 21 11:56:10 BST 2016 > [email protected]:/usr/src/sys/arch/amd64/compile/ARTLESS.MP > real mem = 8477306880 (8084MB) > avail mem = 8216145920 (7835MB) > mpath0 at root > scsibus0 at mpath0: 256 targets > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xec400 (90 entries) > bios0: vendor Dell Inc. version "A04" date 07/20/2014 > bios0: Dell Inc. PowerEdge T20 > acpi0 at bios0: rev 2 > acpi0: sleep states S0 S3 S4 S5 > acpi0: tables DSDT FACP APIC FPDT SLIC LPIT SSDT SSDT SSDT HPET SSDT MCFG > SSDT ASF! DMAR > acpi0: wakeup devices PS2K(S3) PS2M(S3) UAR1(S3) PXSX(S4) RP01(S4) PXSX(S4) > RP02(S4) PXSX(S4) RP03(S4) PXSX(S4) RP05(S4) PXSX(S4) RP06(S4) PXSX(S4) > RP07(S4) PXSX(S4) [...] > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: Intel(R) Xeon(R) CPU E3-1225 v3 @ 3.20GHz, 3392.59 MHz > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,SENSOR,ARAT > cpu0: 256KB 64b/line 8-way L2 cache > cpu0: smt 0, core 0, package 0 > mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges > cpu0: apic clock running at 99MHz > cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4, IBE > cpu1 at mainbus0: apid 2 (application processor) > cpu1: Intel(R) Xeon(R) CPU E3-1225 v3 @ 3.20GHz, 3392.15 MHz > cpu1: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,SENSOR,ARAT > cpu1: 256KB 64b/line 8-way L2 cache > cpu1: smt 0, core 1, package 0 > cpu2 at mainbus0: apid 4 (application processor) > cpu2: Intel(R) Xeon(R) CPU E3-1225 v3 @ 3.20GHz, 3392.15 MHz > cpu2: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,SENSOR,ARAT > cpu2: 256KB 64b/line 8-way L2 cache > cpu2: smt 0, core 2, package 0 > cpu3 at mainbus0: apid 6 (application processor) > cpu3: Intel(R) Xeon(R) CPU E3-1225 v3 @ 3.20GHz, 3392.15 MHz > cpu3: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,SENSOR,ARAT > cpu3: 256KB 64b/line 8-way L2 cache > cpu3: smt 0, core 3, package 0 > ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins > acpihpet0 at acpi0: 14318179 Hz > acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63 > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus 1 (RP01) > acpiprt2 at acpi0: bus 2 (RP02) > acpiprt3 at acpi0: bus 4 (RP03) > acpiprt4 at acpi0: bus -1 (PEG0) > acpiprt5 at acpi0: bus -1 (PEG1) > acpiprt6 at acpi0: bus -1 (PEG2) > acpiec0 at acpi0: not present > acpicpu0 at acpi0: C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS > acpicpu1 at acpi0: C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS > acpicpu2 at acpi0: C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS > acpicpu3 at acpi0: C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS > acpitz0 at acpi0: critical temperature is 105 degC > acpitz1 at acpi0: critical temperature is 105 degC > "PNP0103" at acpi0 not configured > "INT3F0D" at acpi0 not configured > "PNP0501" at acpi0 not configured > acpibtn0 at acpi0: PWRB > acpivideo0 at acpi0: GFX0 > acpivout0 at acpivideo0: DD1F > cpu0: Enhanced SpeedStep 3392 MHz: speeds: 3201, 3200, 3000, 2900, 2700, > 2500, 2300, 2200, 2000, 1800, 1700, 1500, 1300, 1100, 1000, 800 MHz > pci0 at mainbus0 bus 0 > pchb0 at pci0 dev 0 function 0 "Intel Xeon E3-1200 v3 Host" rev 0x06 > inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics P4600" rev 0x06 > drm0 at inteldrm0 > inteldrm0: msi > inteldrm0: 1920x1200 > error: [drm:pid0:intel_dp_set_idle_link_train] *ERROR* Timed out waiting for > DP idle patterns > wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation) > wsdisplay0: screen 1-5 added (std, vt100 emulation) > xhci0 at pci0 dev 20 function 0 "Intel 8 Series xHCI" rev 0x04: msi > usb0 at xhci0: USB revision 3.0 > uhub0 at usb0 "Intel xHCI root hub" rev 3.00/1.00 addr 1 > "Intel 8 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured > puc0 at pci0 dev 22 function 3 "Intel 8 Series KT" rev 0x04: ports: 1 com > com4 at puc0 port 0 apic 8 int 19: ns16550a, 16 byte fifo > com4: probed fifo depth: 0 bytes > em0 at pci0 dev 25 function 0 "Intel I217-LM" rev 0x04: msi, address > f8:b1:56:ac:32:76 > ehci0 at pci0 dev 26 function 0 "Intel 8 Series USB" rev 0x04: apic 8 int 16 > usb1 at ehci0: USB revision 2.0 > uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > azalia0 at pci0 dev 27 function 0 "Intel 8 Series HD Audio" rev 0x04: msi > azalia0: codecs: Realtek/0x0280 > audio0 at azalia0 > ppb0 at pci0 dev 28 function 0 "Intel 8 Series PCIE" rev 0xd4 > pci1 at ppb0 bus 1 > ppb1 at pci0 dev 28 function 1 "Intel 8 Series PCIE" rev 0xd4: msi > pci2 at ppb1 bus 2 > ppb2 at pci2 dev 0 function 0 "TI XIO2001 PCIE-PCI" rev 0x00 > pci3 at ppb2 bus 3 > ppb3 at pci0 dev 28 function 2 "Intel 8 Series PCIE" rev 0xd4: msi > pci4 at ppb3 bus 4 > em1 at pci4 dev 0 function 0 "Intel 82572EI" rev 0x06: apic 8 int 18, address > 00:1b:21:2d:f7:0c > ehci1 at pci0 dev 29 function 0 "Intel 8 Series USB" rev 0x04: apic 8 int 23 > usb2 at ehci1: USB revision 2.0 > uhub2 at usb2 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > pcib0 at pci0 dev 31 function 0 "Intel C226 LPC" rev 0x04 > ahci0 at pci0 dev 31 function 2 "Intel 8 Series AHCI" rev 0x04: msi, AHCI 1.3 > ahci0: port 0: 3.0Gb/s > ahci0: port 1: 3.0Gb/s > ahci0: port 2: 6.0Gb/s > scsibus1 at ahci0: 32 targets > sd0 at scsibus1 targ 0 lun 0: <ATA, Hitachi HDS72202, JKAO> SCSI3 0/direct > fixed naa.5000cca222dd41be > sd0: 1907729MB, 512 bytes/sector, 3907029168 sectors > sd1 at scsibus1 targ 1 lun 0: <ATA, Hitachi HDS72202, JKAO> SCSI3 0/direct > fixed naa.5000cca222f32c62 > sd1: 1907729MB, 512 bytes/sector, 3907029168 sectors > sd2 at scsibus1 targ 2 lun 0: <ATA, Samsung SSD 840, EXT0> SCSI3 0/direct > fixed naa.50025388a0291773 > sd2: 238475MB, 512 bytes/sector, 488397168 sectors, thin > ichiic0 at pci0 dev 31 function 3 "Intel 8 Series SMBus" rev 0x04: apic 8 int > 18 > iic0 at ichiic0 > sdtemp0 at iic0 addr 0x19: mcp98243 > sdtemp1 at iic0 addr 0x1b: mcp98243 > spdmem0 at iic0 addr 0x51: 4GB DDR3 SDRAM ECC PC3-12800 with thermal sensor > spdmem1 at iic0 addr 0x53: 4GB DDR3 SDRAM ECC PC3-12800 with thermal sensor > isa0 at pcib0 > isadma0 at isa0 > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > com0: console > pckbc0 at isa0 port 0x60/5 irq 1 irq 12 > pckbd0 at pckbc0 (kbd slot) > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > uhub3 at uhub1 port 1 "Intel Rate Matching Hub" rev 2.00/0.04 addr 2 > uhub4 at uhub2 port 1 "Intel Rate Matching Hub" rev 2.00/0.04 addr 2 > uaudio0 at uhub4 port 3 configuration 1 interface 0 "EDIROL UA-1EX" rev > 1.10/1.00 addr 3 > uaudio0: audio rev 1.00, 0 mixer controls > audio1 at uaudio0 > uhub5 at uhub4 port 5 "Texas Instruments product 0x8142" rev 2.10/1.00 addr 4 > uhidev0 at uhub5 port 2 configuration 1 interface 0 "Lite-On Technology Corp. > ThinkPad USB Keyboard with TrackPoint" rev 1.10/1.27 addr 5 > uhidev0: iclass 3/1 > ukbd0 at uhidev0: 8 variable keys, 6 key codes > wskbd1 at ukbd0 mux 1 > wskbd1: connecting to wsdisplay0 > uhidev1 at uhub5 port 2 configuration 1 interface 1 "Lite-On Technology Corp. > ThinkPad USB Keyboard with TrackPoint" rev 1.10/1.27 addr 5 > uhidev1: iclass 3/0, 4 report ids > ums0 at uhidev1 reportid 1: 3 buttons > wsmouse0 at ums0 mux 0 > uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0 > uhid1 at uhidev1 reportid 3: input=3, output=1, feature=0 > uhid2 at uhidev1 reportid 4: input=0, output=0, feature=4 > uhub6 at uhub5 port 4 "Texas Instruments product 0x8142" rev 2.10/1.00 addr 6 > vscsi0 at root > scsibus2 at vscsi0: 256 targets > softraid0 at root > scsibus3 at softraid0: 256 targets > sd3 at scsibus3 targ 1 lun 0: <OPENBSD, SR RAID 1, 006> SCSI2 0/direct fixed > sd3: 1907726MB, 512 bytes/sector, 3907023473 sectors > root on sd3a (96815a5b7ddd33a3.a) swap on sd3b dump on sd3b > arp_rtrequest: bad gateway value: vlan5 -- Matthieu Herrb
pgpL5H0_lHOdz.pgp
Description: PGP signature
