Boot fails on i386 -current
With last two snapshots the i386 bsd kernel fails to boot on this old
machine I got.
This is how boot attempts end (written down by hand)
(...snip...)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (AGP_)
acpiprt2 at acpi0: bus 2 (PCIE)
acpiprt3 at acpi0: bus -1 (MPCI)
acpicpu0 at acpi0unable to find cpu 0
uvm_fault(0xd0baa160, 0x0, 0, 1) -> e
kernel: page fault trap, code=0
Stopped at acpicpu_getcst_from_fadt+0x37: movl clean_idt+0x2f4(%eax),%
eax
ddb>
This is dmesg from somewhat older backup kernel I can still boot from:
OpenBSD 6.0 (GENERIC) #1917: Tue Jul 26 12:48:33 MDT 2016
[email protected]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) 4 Mobile CPU 1.80GHz ("GenuineIntel"
686-class) 1.80 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PERF
real mem = 2146852864 (2047MB)
avail mem = 2093072384 (1996MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: date 05/15/03, BIOS32 rev. 0 @ 0xffe90, SMBIOS rev.
2.3 @ 0xf7690 (61 entries)
bios0: vendor Dell Computer Corporation version "A09" date 05/15/2003
bios0: Dell Computer Corporation Latitude C640
acpi0 at bios0: rev 0
acpi0: sleep states S0 S1 S3 S4 S5
acpi0: tables DSDT FACP
acpi0: wakeup devices LID_(S3) PBTN(S4) PCI0(S3) UAR1(S3) USB0(S1)
USB1(S1) USB2(S1) MODM(S3) PCIE(S3) MPCI(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (AGP_)
acpiprt2 at acpi0: bus 2 (PCIE)
acpiprt3 at acpi0: bus -1 (MPCI)
acpicpu0 at acpi0acpicpu0: struck PSS entry, core frequency equals last
acpicpu0: struck PSS entry, core frequency equals last
acpicpu0: invalid _PSS length
: !C2(@50 io@0x8e4), C1(@1 halt!)
acpipwrres0 at acpi0: PADA, resource for ADPT
acpitz0 at acpi0: critical temperature is 99 degC
acpiac0 at acpi0: AC unit online
acpibat0 at acpi0: BAT0 model "LIP8120DLP" serial 5184 type LION oem
"Sony Corp."
acpibat1 at acpi0: BAT1 not present
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: PBTN
acpibtn2 at acpi0: SBTN
"PNP0F13" at acpi0 not configured
"PNP0303" at acpi0 not configured
"PNP0700" at acpi0 not configured
"PNP0501" at acpi0 not configured
"PNP0401" at acpi0 not configured
acpidock0 at acpi0: GDCK not docked (0)
acpivideo0 at acpi0: VID_
bios0: ROM list: 0xc0000/0xf000 0xcf000/0x800! 0xcf800/0x800!
cpu0 at mainbus0: (uniprocessor)
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82845 Host" rev 0x04
intelagp0 at pchb0
agp0 at intelagp0: aperture at 0xe8000000, size 0x4000000
ppb0 at pci0 dev 1 function 0 "Intel 82845 AGP" rev 0x04
pci1 at ppb0 bus 1
radeondrm0 at pci1 dev 0 function 0 "ATI Radeon Mobility M7" rev 0x00
drm0 at radeondrm0
radeondrm0: irq 11
uhci0 at pci0 dev 29 function 0 "Intel 82801CA/CAM USB" rev 0x02: irq 11
ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x42
pci2 at ppb1 bus 2
xl0 at pci2 dev 0 function 0 "3Com 3c905C 100Base-TX" rev 0x78: irq
11, address 00:08:74:48:40:d6
exphy0 at xl0 phy 24: 3Com internal media interface
cbb0 at pci2 dev 1 function 0 "TI PCI1420 CardBus" rev 0x00: irq 11
cbb1 at pci2 dev 1 function 1 "TI PCI1420 CardBus" rev 0x00: irq 11
ath0 at pci2 dev 3 function 0 "Atheros AR2413" rev 0x01: irq 11
ath0: AR2413 7.8 phy 4.5 rf 5.6 eeprom 5.2, WOR3W, address 00:16:cf:53:07:71
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 4 device 0 cacheline 0x8, lattimer 0x20
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 5 device 0 cacheline 0x8, lattimer 0x20
pcmcia1 at cardslot1
ichpcib0 at pci0 dev 31 function 0 "Intel 82801CAM LPC" rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 82801CAM IDE" rev 0x02: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
wd0 at pciide0 channel 0 drive 0: <Hitachi HTS541080G9AT00>
wd0: 16-sector PIO, LBA, 76319MB, 156301488 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <TOSHIBA, DVD-ROM SD-C2612, 1D21> ATAPI
5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
auich0 at pci0 dev 31 function 5 "Intel 82801CA/CAM AC97" rev 0x02:
irq 11, ICH3 AC97
ac97: codec id 0x4352595b (Cirrus Logic CS4205 rev 3)
ac97: codec features mic channel, tone, simulated stereo, bass boost,
20 bit DAC, 18 bit ADC, SRS 3D
audio0 at auich0
"Intel 82801CA/CAM Modem" rev 0x02 at pci0 dev 31 function 6 not configured
usb0 at uhci0: USB revision 1.0
uhub0 at usb0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
wsmouse1 at pms0 mux 0
pms0: Synaptics touchpad, firmware 5.9
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
sd0 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006> SCSI2 0/direct fixed
sd0: 73241MB, 512 bytes/sector, 149998377 sectors
root on sd0a (b7aac228eb17d109.a) swap on sd0b dump on sd0b
radeondrm0: 1400x1050
wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using wskbd0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
This is the content of the human readable "header" file from acpidump:
RSD PTR: Checksum=47, OEMID=DELL, RsdtAddress=0x000fde64
RSDT: Length=40, Revision=1, Checksum=159,
OEMID=DELL, OEM Table ID=CPi R, OEM Revision=0x27d3050f,
Creator ID=ASL, Creator Revision=0x61
Entries={ 0x000fde90 }
DSDT=0xfffe4000
INT_MODEL=PIC
SCI_INT=9
SMI_CMD=0xb2, ACPI_ENABLE=0x70, ACPI_DISABLE=0x71, S4BIOS_REQ=0x97
PM1a_EVT_BLK=0x800-0x803
PM1a_CNT_BLK=0x804-0x805
PM2_CNT_BLK=0x820-0x820
PM2_TMR_BLK=0x808-0x80b
PM2_GPE0_BLK=0x828-0x82b
PM2_GPE1_BLK=0x82c-0x82f, GPE1_BASE=16
P_LVL2_LAT=50ms, P_LVL3_LAT=2000ms
FLUSH_SIZE=0, FLUSH_STRIDE=0
DUTY_OFFSET=1, DUTY_WIDTH=3
DAY_ALRM=0, MON_ALRM=0, CENTURY=0
Flags={WBINVD,PROC_C1,PWR_BUTTON,SLP_BUTTON,DCK_CAP}
DSDT: Length=12674, Revision=1, Checksum=54,
OEMID=INT430, OEM Table ID=SYSFexxx, OEM Revision=0x1001,
Creator ID=MSFT, Creator Revision=0x100000e
--
Eivind Eide
"ONLY THOSE WHO ATTEMPT THE IMPOSSIBLE WILL ACHIEVE THE ABSURD"
- Oceania Association of Autonomous Astronauts
