Since upgrading several machines to a more current snapshot (in an effort to keep up to date with LibreSSL fixes), I noticed ntpd started failing. Here's what I see on my laptop:
Oct 2 17:50:15 drop doas: weerd ran command rcctl start ntpd as root from
/home/weerd
Oct 2 17:50:28 drop ntpd[17059]: Terminating
Oct 2 17:52:50 drop doas: weerd ran command rcctl start ntpd as root from
/home/weerd
Oct 2 17:53:03 drop ntpd[27986]: Terminating
Oct 2 17:53:18 drop doas: weerd ran command ktrace -d ntpd -v as root from
/home/weerd
Oct 2 17:53:30 drop ntpd[97855]: Terminating
I have ntpd_flags="-v" in my /etc/rc.conf.local, but the above is all
the logging output I get (that's from my *.* syslog file, that also
includes DEBUG output).
I've attached the gzip'd ktrace output, the last lines of kdump output
show:
17513 ntpd RET pread 4096/0x1000
17513 ntpd CALL close(3)
17513 ntpd RET close 0
17513 ntpd CALL kbind(0x7f7ffffbf6b8,24,0xa9c0696fbbe94040)
17513 ntpd RET kbind 0
17513 ntpd CALL setpriority(PRIO_PROCESS,0,-20)
17513 ntpd RET setpriority 0
17513 ntpd CALL kbind(0x7f7ffffbf688,24,0xa9c0696fbbe94040)
17513 ntpd RET kbind 0
17513 ntpd CALL adjtime(0x7f7ffffbf750,0)
17513 ntpd RET adjtime 0
17513 ntpd CALL kbind(0x7f7ffffbf688,24,0xa9c0696fbbe94040)
17513 ntpd RET kbind 0
17513 ntpd CALL kbind(0x7f7ffffbf6b8,24,0xa9c0696fbbe94040)
17513 ntpd RET kbind 0
17513 ntpd CALL fork()
17513 ntpd RET fork 97855/0x17e3f
17513 ntpd CALL exit(0)
As mentioned, I see this on several machines. The daily(8) mail
includes the rcctl ls failed output that says:
Services that should be running but aren't:
ntpd
So far, 5 machines have been upgraded and 4 of them show this behavior
(although my laptop is now really fast to exit). These are all amd64
machines (because I haven't gotten around to upgrading the few i386 I
still have running yet). They're 'real' and virtual (KVM) machines.
I've ktrace'd this on my laptop and one of the KVM vm's. Dmesgs for
these machiens are included at the end of this mail. I've also
attached the ktrace output from the VM (ktrace.vm.gz), where it took
substantially longer to exit (but it exited with the same snippet
trace).
Has anyone else seen this behavior?
Cheers,
Paul 'WEiRD' de Weerd
--- begin dmesg from my laptop ---------------------------------------
OpenBSD 6.0-current (GENERIC.MP) #0: Wed Sep 28 20:53:18 CEST 2016
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 8485335040 (8092MB)
avail mem = 8223621120 (7842MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xe6020 (18 entries)
bios0: vendor INSYDE version "R1010H5" date 07/28/2011
bios0: Sony Corporation VPCZ23C5E
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP TCPA ASF! HPET APIC MCFG SLIC WDAT SSDT BOOT SSDT ASPT
SSDT SSDT SSDT SSDT
acpi0: wakeup devices EHC1(S3) EHC2(S3) HDEF(S0) WLAN(S0) RP01(S0) RMSC(S0)
RP02(S0) NXUC(S3) RP03(S3) RLAN(S3) RP04(S3) RP07(S3) PEG0(S0) PEGP(S0)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i7-2640M CPU @ 2.80GHz, 2794.05 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.1.2, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM) i7-2640M CPU @ 2.80GHz, 2793.65 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 1, core 0, package 0
cpu2 at mainbus0: apid 2 (application processor)
cpu2: Intel(R) Core(TM) i7-2640M CPU @ 2.80GHz, 2793.65 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 0, core 1, package 0
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM) i7-2640M CPU @ 2.80GHz, 2793.65 MHz
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 1, core 1, package 0
ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 2 (RP01)
acpiprt2 at acpi0: bus 3 (RP02)
acpiprt3 at acpi0: bus 4 (RP03)
acpiprt4 at acpi0: bus 5 (RP04)
acpiprt5 at acpi0: bus 8 (RP07)
acpiprt6 at acpi0: bus -1 (PEG0)
acpiec0 at acpi0
acpicpu0 at acpi0: C3(350@104 mwait.1@0x20), C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C3(350@104 mwait.1@0x20), C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C3(350@104 mwait.1@0x20), C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C3(350@104 mwait.1@0x20), C1(1000@1 mwait.1), PSS
acpitz0 at acpi0: critical temperature is 98 degC
acpibat0 at acpi0: BAT1 type Lion oem "Sony Corporation"
acpibat1 at acpi0: BAT2 not present
"INT3F0D" at acpi0 not configured
"PNP0303" at acpi0 not configured
"SNY9015" at acpi0 not configured
"SNY5001" at acpi0 not configured
tpm0 at acpi0: TPM_ addr 0xfed40000/0x5000: Infineon SLB9635 1.2 rev 0x10
acpiac0 at acpi0: AC unit online
acpibtn0 at acpi0: LID0
acpibtn1 at acpi0: PWRB
"INT340E" at acpi0 not configured
acpidock0 at acpi0: DOCK not docked (0)
acpivideo0 at acpi0: DD01
acpivideo1 at acpi0: DD02
acpivideo2 at acpi0: DD03
acpivideo3 at acpi0: DD04
acpivideo4 at acpi0: DD05
acpivideo5 at acpi0: DD06
acpivideo6 at acpi0: DD07
acpivideo7 at acpi0: DD08
acpivideo8 at acpi0: GFX0
acpivout0 at acpivideo8: DD02
cpu0: Enhanced SpeedStep 2794 MHz: speeds: 2801, 2800, 2400, 2200, 2000, 1800,
1600, 1400, 1200, 1000, 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 2G Host" rev 0x09
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 3000" rev 0x09
drm0 at inteldrm0
inteldrm0: msi
inteldrm0: 1920x1080
error: [drm:pid0:intel_dp_start_link_train] *ERROR* too many full retries, give
up
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
"Intel 6 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
ehci0 at pci0 dev 26 function 0 "Intel 6 Series USB" rev 0x04: apic 0 int 23
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
addr 1
azalia0 at pci0 dev 27 function 0 "Intel 6 Series HD Audio" rev 0x04: msi
azalia0: codecs: Realtek/0x0275, Intel/0x2805, using Realtek/0x0275
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 6 Series PCIE" rev 0xb4: msi
pci1 at ppb0 bus 2
iwn0 at pci1 dev 0 function 0 "Intel Centrino Advanced-N 6030" rev 0x34: msi,
MIMO 2T2R, MoW, address 88:53:2e:d9:dd:9d
ppb1 at pci0 dev 28 function 1 "Intel 6 Series PCIE" rev 0xb4: msi
pci2 at ppb1 bus 3
rtsx0 at pci2 dev 0 function 0 "Realtek RTS5209 Card Reader" rev 0x01: msi
sdmmc0 at rtsx0: 4-bit
ppb2 at pci0 dev 28 function 2 "Intel 6 Series PCIE" rev 0xb4: msi
pci3 at ppb2 bus 4
xhci0 at pci3 dev 0 function 0 "NEC xHCI" rev 0x04: msi
usb1 at xhci0: USB revision 3.0
uhub1 at usb1 configuration 1 interface 0 "NEC xHCI root hub" rev 3.00/1.00
addr 1
ppb3 at pci0 dev 28 function 3 "Intel 6 Series PCIE" rev 0xb4: msi
pci4 at ppb3 bus 5
re0 at pci4 dev 0 function 0 "Realtek 8168" rev 0x06: RTL8168E/8111E-VL
(0x2c80), msi, address 54:42:49:9b:1e:1a
rgephy0 at re0 phy 7: RTL8169S/8110S/8211 PHY, rev. 5
ppb4 at pci0 dev 28 function 6 "Intel 6 Series PCIE" rev 0xb4: msi
pci5 at ppb4 bus 8
ehci1 at pci0 dev 29 function 0 "Intel 6 Series USB" rev 0x04: apic 0 int 20
usb2 at ehci1: USB revision 2.0
uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
addr 1
pcib0 at pci0 dev 31 function 0 "Intel HM67 LPC" rev 0x04
ahci0 at pci0 dev 31 function 2 "Intel 82801HBM RAID" rev 0x04: msi, AHCI 1.3
ahci0: port 0: 6.0Gb/s
ahci0: port 1: 6.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, SAMSUNG MZRPC128, CXM0> SCSI3 0/direct
fixed naa.50000f0043584d30
sd0: 61057MB, 512 bytes/sector, 125045424 sectors, thin
sd1 at scsibus1 targ 1 lun 0: <ATA, SAMSUNG MZRPC128, CXM0> SCSI3 0/direct
fixed naa.50000f0043584d30
sd1: 61057MB, 512 bytes/sector, 125045424 sectors, thin
ichiic0 at pci0 dev 31 function 3 "Intel 6 Series SMBus" rev 0x04: apic 0 int 22
iic0 at ichiic0
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
pms0: Synaptics clickpad, firmware 8.1
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vmm0 at mainbus0: VMX/EPT
uhub3 at uhub0 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev
2.00/0.00 addr 2
ugen0 at uhub3 port 1 "AuthenTec Fingerprint Sensor" rev 2.00/25.01 addr 3
ugen1 at uhub3 port 2 "Intel product 0x0189" rev 2.00/69.19 addr 4
uvideo0 at uhub3 port 3 configuration 1 interface 0 "Ricoh Company Ltd. USB2.0
Camera" rev 2.00/1.36 addr 5
video0 at uvideo0
uhub4 at uhub2 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev
2.00/0.00 addr 2
uhidev0 at uhub4 port 2 configuration 1 interface 0 "Logitech USB Receiver" rev
2.00/24.00 addr 3
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub4 port 2 configuration 1 interface 1 "Logitech USB Receiver" rev
2.00/24.00 addr 3
uhidev1: iclass 3/1, 8 report ids
ums0 at uhidev1 reportid 2: 16 buttons, Z and W dir
wsmouse1 at ums0 mux 0
uhid0 at uhidev1 reportid 3: input=4, output=0, feature=0
uhid1 at uhidev1 reportid 4: input=1, output=0, feature=0
uhid2 at uhidev1 reportid 8: input=1, output=0, feature=0
uhidev2 at uhub4 port 2 configuration 1 interface 2 "Logitech USB Receiver" rev
2.00/24.00 addr 3
uhidev2: iclass 3/0, 33 report ids
uhid3 at uhidev2 reportid 16: input=6, output=6, feature=0
uhid4 at uhidev2 reportid 17: input=19, output=19, feature=0
uhid5 at uhidev2 reportid 32: input=14, output=14, feature=0
uhid6 at uhidev2 reportid 33: input=31, output=31, feature=0
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
sd2 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006> SCSI2 0/direct fixed
sd2: 61051MB, 512 bytes/sector, 125033303 sectors
root on sd2a (07731febbfe28d7d.a) swap on sd2b dump on sd2b
error: [drm:pid24158:intel_dp_start_link_train] *ERROR* too many full retries,
give up
error: [drm:pid24158:intel_dp_start_link_train] *ERROR* too many full retries,
give up
error: [drm:pid24158:intel_dp_start_link_train] *ERROR* too many full retries,
give up
error: [drm:pid24158:intel_dp_start_link_train] *ERROR* too many full retries,
give up
error: [drm:pid24158:intel_dp_start_link_train] *ERROR* too many full retries,
give up
error: [drm:pid24158:intel_dp_start_link_train] *ERROR* too many full retries,
give up
error: [drm:pid24158:intel_dp_start_link_train] *ERROR* too many full retries,
give up
--- end dmesg from my laptop -----------------------------------------
--- begin dmesg from KVM virtual machine -----------------------------
OpenBSD 6.0-current (GENERIC.MP) #2498: Tue Sep 27 17:53:43 MDT 2016
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 2130698240 (2031MB)
avail mem = 2061684736 (1966MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf1920 (11 entries)
bios0: vendor Bochs version "Bochs" date 01/01/2011
bios0: Bochs Bochs
acpi0 at bios0: rev 0
acpi0: sleep states S3 S4 S5
acpi0: tables DSDT FACP SSDT APIC HPET
acpi0: wakeup devices
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: QEMU Virtual CPU version 0.14, 3392.58 MHz
cpu0:
FPU,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SSE3,VMX,CX16,POPCNT,HV,NXE,LONG,LAHF
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line
16-way L2 cache
cpu0: ITLB 255 4KB entries direct-mapped, 255 4MB entries direct-mapped
cpu0: DTLB 255 4KB entries direct-mapped, 255 4MB entries direct-mapped
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 999MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: QEMU Virtual CPU version 0.14, 3392.15 MHz
cpu1:
FPU,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SSE3,VMX,CX16,POPCNT,HV,NXE,LONG,LAHF
cpu1: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line
16-way L2 cache
cpu1: ITLB 255 4KB entries direct-mapped, 255 4MB entries direct-mapped
cpu1: DTLB 255 4KB entries direct-mapped, 255 4MB entries direct-mapped
cpu1: smt 0, core 0, package 1
ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 11, 24 pins
acpihpet0 at acpi0: 100000000 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpicpu0 at acpi0: C1(@1 halt!)
acpicpu1 at acpi0: C1(@1 halt!)
"ACPI0006" at acpi0 not configured
"PNP0303" at acpi0 not configured
"PNP0F13" at acpi0 not configured
"PNP0700" at acpi0 not configured
"PNP0501" at acpi0 not configured
"ACPI0007" at acpi0 not configured
"ACPI0007" at acpi0 not configured
pvbus0 at mainbus0: KVM
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel 82441FX" rev 0x02
pcib0 at pci0 dev 1 function 0 "Intel 82371SB ISA" rev 0x00
pciide0 at pci0 dev 1 function 1 "Intel 82371SB IDE" rev 0x00: DMA, channel 0
wired to compatibility, channel 1 wired to compatibility
pciide0: channel 0 disabled (no drives)
atapiscsi0 at pciide0 channel 1 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <QEMU, QEMU DVD-ROM, 0.14> ATAPI 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
uhci0 at pci0 dev 1 function 2 "Intel 82371SB USB" rev 0x01: apic 0 int 11
piixpm0 at pci0 dev 1 function 3 "Intel 82371AB Power" rev 0x03: apic 0 int 9
iic0 at piixpm0
vga1 at pci0 dev 2 function 0 "Cirrus Logic CL-GD5446" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
virtio0 at pci0 dev 4 function 0 "Qumranet Virtio Memory" rev 0x00
viomb0 at virtio0
virtio0: apic 0 int 11
virtio1 at pci0 dev 5 function 0 "Qumranet Virtio Storage" rev 0x00
vioblk0 at virtio1
scsibus2 at vioblk0: 2 targets
sd0 at scsibus2 targ 0 lun 0: <VirtIO, Block Device, > SCSI3 0/direct fixed
sd0: 8192MB, 512 bytes/sector, 16777216 sectors
virtio1: msix shared
virtio2 at pci0 dev 6 function 0 "Qumranet Virtio Storage" rev 0x00
vioblk1 at virtio2
scsibus3 at vioblk1: 2 targets
sd1 at scsibus3 targ 0 lun 0: <VirtIO, Block Device, > SCSI3 0/direct fixed
sd1: 102400MB, 512 bytes/sector, 209715200 sectors
virtio2: msix shared
virtio3 at pci0 dev 7 function 0 "Qumranet Virtio Network" rev 0x00
vio0 at virtio3: address 52:54:00:a9:67:db
virtio3: msix shared
isa0 at pcib0
isadma0 at isa0
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 1: density unknown
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
usb0 at uhci0: USB revision 1.0
uhub0 at usb0 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
addr 1
vscsi0 at root
scsibus4 at vscsi0: 256 targets
softraid0 at root
scsibus5 at softraid0: 256 targets
root on sd0a (099cb4906554e04b.a) swap on sd0b dump on sd0b
--- end dmesg from KVM virtual machine -------------------------------
--
>++++++++[<++++++++++>-]<+++++++.>+++[<------>-]<.>+++[<+
+++++++++++>-]<.>++[<------------>-]<+.--------------.[-]
http://www.weirdnet.nl/
ktrace.out.gz
Description: application/gunzip
ktrace.vm.gz
Description: application/gunzip
