Hello Rick, Thanks for your report. This should be fixed in -current since October 16, could you confirm it?
On 13/11/16(Sun) 07:50, [email protected] wrote: > >Synopsis: multicast routing crash > >Category: kernel > >Environment: > System : OpenBSD 6.0 > Details : OpenBSD 6.0 (GENERIC.MP) #2: Sat Nov 12 14:40:14 EST 2016 > > [email protected]:/usr/src/sys/arch/i386/compile/GENERIC.MP > > Architecture: OpenBSD.i386 > Machine : i386 > >Description: > Kernel panic when igmpproxy is run. > All errata applied and panic still ensues. > > panic output: > mbuf 0xd7445d00 > m_type: 1 m_flags: 202<M_PKTHDR,M_MCAST> > m_next: 0xd7089900 m_nextpkt: 0x0 > m_data: 0xd7445d48 m_len: 20 > m_dat: 0xd7445d14 m_pktdat: 0xd7445d48 > m_pkthdr.ph_ifidx: 2 m_pkthdr.len: 84 > m_pkthdr.ph_tags: 0x0 m_pkthdr.ph_tagsset: 0 > m_pkthdr.csum_flags: a8<IPV4_CSUM_IN_OK,TCP_CSUM_IN_OK,UDPC_CSUM_IN_OK> > m_pkthdr.ether_vtag: 0 m_pkthdr.ph_rtableid: 0 > m_pkthdr.pf.statekey: 0xd6ff1e68 m_pkthdr.pf.inp 0x0 > m_pkthdr.pf.qid: 0 m_pkthdr.pf.tag: 0 > m_pkthdr.pf.flags: 80<PROCESSED> > m_pkthdr.pf.routed: 0 m_pkthdr.pf.prio: 3 > panic: incoming mbuf already has a statekey > Stopped at Debugger+0x7: leave > TID PID UID PRFLAGS PFLAGS CPU COMMAND > 35943 35943 0 0 0 0 > igmpproxy > *54451 54451 0 0x14000 0x210 1 softnet > Debugger(d09f6474,f6305db8,d09c8c2c,f6035db8,0) at Debugger+0x7 > panic(d09c8c2c,d03d10c0,0,0,0,0) at panic+0x71 > pf_test(2,1,d24ae04c,f6035edc,d0b4d400) at pf_test+0xf25 > ipv4_input(d7445d00,0,f6035f4c,d03c11a3,d2402094) at ipv4_input+0x26e > ipintr(40,d03c1510,f6035f4c,d03ab4b2,d0bb4860) at ipintr+0x16 > if_netisr(0,f6035f68,d03c1510,f6035f90,d03ab4e2) at if_netisr+0xea > taskq_thread(d2402080) at taskq_thread+0x60 > http://www.openbsd.org/ddb.html describes the minimum info required in bug > reports Insufficient info makes it difficult to find and fix bugs. > ddb{1}> > > The keyboard is unresponsive at this point, so I am unable to provide > any further output. > Failure is in pf.c, line 6591. > >How-To-Repeat: > Start igmpproxy, wait until the system panics. > >Fix: > Don't run igmpproxy. > > > dmesg: > OpenBSD 6.0 (GENERIC.MP) #2: Sat Nov 12 14:40:14 EST 2016 > [email protected]:/usr/src/sys/arch/i386/compile/GENERIC.MP > cpu0: Intel(R) Pentium(R) 4 CPU 3.00GHz ("GenuineIntel" 686-class) 3 GHz > cpu0: > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,DTES64,MWAIT,DS-CPL,EST,CNXT-ID,CX16,xTPR > real mem = 1070641152 (1021MB) > avail mem = 1037438976 (989MB) > mpath0 at root > scsibus0 at mpath0: 256 targets > mainbus0 at root > bios0 at mainbus0: date 11/30/06, BIOS32 rev. 0 @ 0xffe90, SMBIOS rev. 2.3 @ > 0xf0450 (73 entries) > bios0: vendor Dell Inc. version "A11" date 11/30/2006 > bios0: Dell Inc. OptiPlex GX520 > acpi0 at bios0: rev 2 > Acpi0: sleep states S0 S1 S3 S4 S5 > acpi0: tables DSDT FACP SSDT APIC BOOT ASF! MCFG HPET > acpi0: wakeup devices VBTN(S4) PCI0(S5) PCI4(S5) PCI2(S5) PCI3(S5) PCI1(S5) > PCI5(S5) PCI6(S5) MOU_(S3) USB0(S3) USB1(S3) USB2(S3) USB3(S3) > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges > cpu0: apic clock running at 199MHz > cpu1 at mainbus0: apid 1 (application processor) > cpu1: Intel(R) Pentium(R) 4 CPU 3.00GHz ("GenuineIntel" 686-class) 3 GHz > cpu1: > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,DTES64,MWAIT,DS-CPL,EST,CNXT-ID,CX16,xTPR > ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins > acpimcfg0 at acpi0 addr 0xf0000000, bus 0-63 > acpihpet0 at acpi0: 14318179 Hz > acpiprt0 at acpi0: bus 4 (PCI4) > acpiprt1 at acpi0: bus 2 (PCI2) > acpiprt2 at acpi0: bus 3 (PCI3) > acpiprt3 at acpi0: bus 1 (PCI1) > acpiprt4 at acpi0: bus -1 (PCI5) > acpiprt5 at acpi0: bus -1 (PCI6) > acpiprt6 at acpi0: bus 0 (PCI0) > acpicpu0 at acpi0: C1(@1 halt!) > acpicpu1 at acpi0: C1(@1 halt!) > acpibtn0 at acpi0: VBTN > "PNP0700" at acpi0 not configured > "PNP0401" at acpi0 not configured > "PNP0501" at acpi0 not configured > bios0: ROM list: 0xc0000/0xa800! 0xca800/0x2000! 0xcc800/0x3800 > cpu0: Enhanced SpeedStep disabled by BIOS > pci0 at mainbus0 bus 0: configuration mode 1 (bios) > pchb0 at pci0 dev 0 function 0 "Intel 82945G Host" rev 0x02 > ppb0 at pci0 dev 1 function 0 "Intel 82945G PCIE" rev 0x02: apic 8 int 16 > pci1 at ppb0 bus 1 > inteldrm0 at pci0 dev 2 function 0 "Intel 82945G Video" rev 0x02 > drm0 at inteldrm0 > intagp0 at inteldrm0 > agp0 at intagp0: aperture at 0xe0000000, size 0x10000000 > inteldrm0: apic 8 int 16 > inteldrm0: 1680x1050 > wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation) > wsdisplay0: screen 1-5 added (std, vt100 emulation) > "Intel 82945G Video" rev 0x02 at pci0 dev 2 function 1 not configured > ppb1 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01: apic 8 int 16 > pci2 at ppb1 bus 2 > bge0 at pci2 dev 0 function 0 "Broadcom BCM5751" rev 0x01, BCM5750 A1 > (0x4001): apic 8 int 16, address 00:14:22:2c:2c:b4 > brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0 > ppb2 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x01: apic 8 int 17 > pci3 at ppb2 bus 3 > uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: apic 8 int 21 > uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: apic 8 int 22 > uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: apic 8 int 18 > uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: apic 8 int 23 > ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 8 int 21 > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > ppb3 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xe1 > pci4 at ppb3 bus 4 > xl0 at pci4 dev 0 function 0 "3Com 3c905B 100Base-TX" rev 0x24: apic 8 int > 16, address 00:10:4b:0a:a2:59 > exphy0 at xl0 phy 24: 3Com internal media interface > auich0 at pci0 dev 30 function 2 "Intel 82801GB AC97" rev 0x01: apic 8 int > 23, ICH7 AC97 > ac97: codec id 0x41445374 (Analog Devices AD1981B) > ac97: codec features headphone, 20 bit DAC, No 3D Stereo > audio0 at auich0 > ichpcib0 at pci0 dev 31 function 0 "Intel 82801GB LPC" rev 0x01: PM disabled > pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA, channel > 0 configured to compatibility, channel 1 configured to compatibility > atapiscsi0 at pciide0 channel 0 drive 0 > scsibus1 at atapiscsi0: 2 targets > cd0 at scsibus1 targ 0 lun 0: <SONY, CD-RW CRX230EE, 2YS3> ATAPI 5/cdrom > removable > cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 > pciide0: channel 1 ignored (disabled) > pciide1 at pci0 dev 31 function 2 "Intel 82801GB SATA" rev 0x01: DMA, channel > 0 configured to native-PCI, channel 1 configured to native-PCI > pciide1: using apic 8 int 20 for native-PCI interrupt > wd0 at pciide1 channel 0 drive 0: <Maxtor 6V200E0> > wd0: 16-sector PIO, LBA48, 194481MB, 398297088 sectors > wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 6 > ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01: SMI > iic0 at ichiic0 > spdmem0 at iic0 addr 0x50: 512MB DDR2 SDRAM non-parity PC2-5300CL5 > spdmem1 at iic0 addr 0x52: 512MB DDR2 SDRAM non-parity PC2-5300CL5 > usb1 at uhci0: USB revision 1.0 > uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb2 at uhci1: USB revision 1.0 > uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb3 at uhci2: USB revision 1.0 > uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb4 at uhci3: USB revision 1.0 > uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > isa0 at ichpcib0 > isadma0 at isa0 > fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 > fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > pckbc0 at isa0 port 0x60/5 irq 1 irq 12 > pckbd0 at pckbc0 (kbd slot) > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > lpt0 at isa0 port 0x378/4 irq 7 > npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 > uhidev0 at uhub3 port 1 configuration 1 interface 0 "Tripplite B015-000 R0.75 > USB to PS2 adapter." rev 1.10/1.00 addr 2 > uhidev0: iclass 3/1 > ukbd0 at uhidev0: 8 variable keys, 6 key codes, country code 33 > wskbd1 at ukbd0 mux 1 > wskbd1: connecting to wsdisplay0 > uhidev1 at uhub3 port 1 configuration 1 interface 1 "Tripplite B015-000 R0.75 > USB to PS2 adapter." rev 1.10/1.00 addr 2 > uhidev1: iclass 3/1 > ums0 at uhidev1: 5 buttons, Z dir > wsmouse0 at ums0 mux 0 > vscsi0 at root > scsibus2 at vscsi0: 256 targets > softraid0 at root > scsibus3 at softraid0: 256 targets > root on wd0a (fa6ea7010740b0f5.a) swap on wd0b dump on wd0b > WARNING: / was not properly unmounted > > usbdevs: > Controller /dev/usb0: > addr 1: high speed, self powered, config 1, EHCI root hub(0x0000), > Intel(0x8086), rev 1.00 > port 1 powered > port 2 powered > port 3 powered > port 4 powered > port 5 powered > port 6 powered > port 7 powered > port 8 powered > Controller /dev/usb1: > addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), > Intel(0x8086), rev 1.00 > port 1 powered > port 2 powered > Controller /dev/usb2: > addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), > Intel(0x8086), rev 1.00 > port 1 powered > port 2 powered > Controller /dev/usb3: > addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), > Intel(0x8086), rev 1.00 > port 1 addr 2: low speed, power 100 mA, config 1, B015-000 R0.75 USB to PS2 > adapter.(0x0002), Tripplite(0x09ae), rev 1.00 > port 2 powered > Controller /dev/usb4: > addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), > Intel(0x8086), rev 1.00 > port 1 powered > port 2 powered >
