On Tue, Jan 03, 2017 at 12:02:25PM +0100, Hrvoje Popovski wrote:
| Hi all,
|
| it seems that pseudo-device can be created if you type whatever you want
| after "c" in "create" parameter...
Not just the 'c' in create:
[root@pom] # ifconfig vlan30
vlan30: no such interface
[root@pom] # ifconfig vlan30 fiets
ifconfig: fiets: bad value
[root@pom] # ifconfig vlan30
vlan30: flags=8002<BROADCAST,MULTICAST> mtu 1500
lladdr 00:00:00:00:00:00
index 5 priority 0 llprio 3
vnetid: none
parent: none
groups: vlan
status: no carrier
You can change the error message you get by
echo 10.0.0.1 fiets >> /etc/hosts
Or, in your case, '10.0.0.1 changelist' etc.
| i think that this is not intended behavior so i'm sending this to bugs@.
| if it is, sorry for noise...
|
|
|
| ifconfig vlan123 c*
| ifconfig: changelist: bad value
|
| # ifconfig vlan123
| vlan123: flags=8002<BROADCAST,MULTICAST> mtu 1500
| lladdr 00:00:00:00:00:00
| index 14 priority 0 llprio 3
| vnetid: none
| parent: none
| groups: vlan
| status: no carrier
|
|
| ifconfig tun2 cASD123
| ifconfig: cASD123: bad value
|
| # ifconfig tun2
| tun2: flags=8010<POINTOPOINT,MULTICAST> mtu 1500
| index 11 priority 0 llprio 3
| groups: tun
| status: down
|
|
| # ifconfig vxlan124 c\-----
| ifconfig: c-----: bad value
|
| # ifconfig vxlan124
| vxlan124: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
| lladdr fe:e1:ba:d1:0d:f3
| index 16 priority 0 llprio 3
| vnetid: none
| groups: vxlan
| media: Ethernet autoselect
| status: active
|
|
|
| # dmesg
| OpenBSD 6.0-current (GENERIC.MP) #0: Mon Jan 2 12:48:29 CET 2017
| [email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
| real mem = 17115840512 (16322MB)
| avail mem = 16592453632 (15823MB)
| mpath0 at root
| scsibus0 at mpath0: 256 targets
| mainbus0 at root
| bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xcf42c000 (99 entries)
| bios0: vendor Dell Inc. version "2.5.4" date 01/22/2016
| bios0: Dell Inc. PowerEdge R620
| acpi0 at bios0: rev 2
| acpi0: sleep states S0 S4 S5
| acpi0: tables DSDT FACP APIC SPCR HPET DMAR MCFG WDAT SLIC ERST HEST
| BERT EINJ TCPA PC__ SRAT SSDT
| acpi0: wakeup devices PCI0(S5)
| acpitimer0 at acpi0: 3579545 Hz, 24 bits
| acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
| cpu0 at mainbus0: apid 4 (boot processor)
| cpu0: Intel(R) Xeon(R) CPU E5-2643 v2 @ 3.50GHz, 3500.53 MHz
| cpu0:
|
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
| cpu0: 256KB 64b/line 8-way L2 cache
| cpu0: TSC frequency 3500529200 Hz
| cpu0: smt 0, core 2, package 0
| mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
| cpu0: apic clock running at 100MHz
| cpu0: mwait min=64, max=64, C-substates=0.2.1.1, IBE
| cpu1 at mainbus0: apid 6 (application processor)
| cpu1: Intel(R) Xeon(R) CPU E5-2643 v2 @ 3.50GHz, 3500.01 MHz
| cpu1:
|
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
| cpu1: 256KB 64b/line 8-way L2 cache
| cpu1: smt 0, core 3, package 0
| cpu2 at mainbus0: apid 8 (application processor)
| cpu2: Intel(R) Xeon(R) CPU E5-2643 v2 @ 3.50GHz, 3500.01 MHz
| cpu2:
|
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
| cpu2: 256KB 64b/line 8-way L2 cache
| cpu2: smt 0, core 4, package 0
| cpu3 at mainbus0: apid 16 (application processor)
| cpu3: Intel(R) Xeon(R) CPU E5-2643 v2 @ 3.50GHz, 3500.01 MHz
| cpu3:
|
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
| cpu3: 256KB 64b/line 8-way L2 cache
| cpu3: smt 0, core 8, package 0
| cpu4 at mainbus0: apid 18 (application processor)
| cpu4: Intel(R) Xeon(R) CPU E5-2643 v2 @ 3.50GHz, 3500.01 MHz
| cpu4:
|
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
| cpu4: 256KB 64b/line 8-way L2 cache
| cpu4: smt 0, core 9, package 0
| cpu5 at mainbus0: apid 20 (application processor)
| cpu5: Intel(R) Xeon(R) CPU E5-2643 v2 @ 3.50GHz, 3500.01 MHz
| cpu5:
|
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
| cpu5: 256KB 64b/line 8-way L2 cache
| cpu5: smt 0, core 10, package 0
| ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 20, 24 pins
| ioapic1 at mainbus0: apid 1 pa 0xfec3f000, version 20, 24 pins
| acpihpet0 at acpi0: 14318179 Hz
| acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
| acpiprt0 at acpi0: bus 0 (PCI0)
| acpiprt1 at acpi0: bus 1 (PEX1)
| acpiprt2 at acpi0: bus -1 (PE1C)
| acpiprt3 at acpi0: bus 3 (PEX2)
| acpiprt4 at acpi0: bus 2 (PEX3)
| acpiprt5 at acpi0: bus 4 (PEX4)
| acpiprt6 at acpi0: bus -1 (PEX5)
| acpiprt7 at acpi0: bus 8 (PEX6)
| acpiprt8 at acpi0: bus 7 (PEX7)
| acpiprt9 at acpi0: bus -1 (PEXB)
| acpiprt10 at acpi0: bus -1 (PEXC)
| acpiprt11 at acpi0: bus -1 (PEXD)
| acpiprt12 at acpi0: bus -1 (PEXE)
| acpicpu0 at acpi0: C1(@1 halt!)
| acpicpu1 at acpi0: C1(@1 halt!)
| acpicpu2 at acpi0: C1(@1 halt!)
| acpicpu3 at acpi0: C1(@1 halt!)
| acpicpu4 at acpi0: C1(@1 halt!)
| acpicpu5 at acpi0: C1(@1 halt!)
| "PNP0C33" at acpi0 not configured
| "ACPI000D" at acpi0 not configured
| "PNP0501" at acpi0 not configured
| "PNP0501" at acpi0 not configured
| "IPI0001" at acpi0 not configured
| "PNP0C14" at acpi0 not configured
| ipmi at mainbus0 not configured
| pci0 at mainbus0 bus 0
| pchb0 at pci0 dev 0 function 0 "Intel E5 v2 Host" rev 0x04
| ppb0 at pci0 dev 1 function 0 "Intel E5 v2 PCIE" rev 0x04
| pci1 at ppb0 bus 1
| 1:0:1: mem address conflict 0xd8000000/0x80000
| ix0 at pci1 dev 0 function 0 "Intel X540T" rev 0x01: msi, address
| ec:f4:bb:c0:39:48
| ix1 at pci1 dev 0 function 1 "Intel X540T" rev 0x01: msi, address
| ec:f4:bb:c0:39:4a
| ppb1 at pci0 dev 2 function 0 "Intel E5 v2 PCIE" rev 0x04: msi
| pci2 at ppb1 bus 3
| ppb2 at pci0 dev 2 function 2 "Intel E5 v2 PCIE" rev 0x04
| pci3 at ppb2 bus 2
| mfi0 at pci3 dev 0 function 0 "Symbios Logic MegaRAID SAS2008" rev 0x03:
| apic 1 int 10
| mfi0: "PERC H310 Mini", firmware 20.13.2-0006
| scsibus1 at mfi0: 16 targets
| sd0 at scsibus1 targ 0 lun 0: <DELL, PERC H310, 2.12> SCSI3 0/direct
| fixed naa.6c81f660f14398001af3a49619e0d82f
| sd0: 285568MB, 512 bytes/sector, 584843264 sectors
| scsibus2 at mfi0: 256 targets
| ppb3 at pci0 dev 3 function 0 "Intel E5 v2 PCIE" rev 0x04: msi
| pci4 at ppb3 bus 4
| ix2 at pci4 dev 0 function 0 "Intel 82599" rev 0x01: msi, address
| 90:e2:ba:19:29:a8
| ix3 at pci4 dev 0 function 1 "Intel 82599" rev 0x01: msi, address
| 90:e2:ba:19:29:a9
| "Intel E5 v2 I/OAT" rev 0x04 at pci0 dev 4 function 0 not configured
| "Intel E5 v2 I/OAT" rev 0x04 at pci0 dev 4 function 1 not configured
| "Intel E5 v2 I/OAT" rev 0x04 at pci0 dev 4 function 2 not configured
| "Intel E5 v2 I/OAT" rev 0x04 at pci0 dev 4 function 3 not configured
| "Intel E5 v2 I/OAT" rev 0x04 at pci0 dev 4 function 4 not configured
| "Intel E5 v2 I/OAT" rev 0x04 at pci0 dev 4 function 5 not configured
| "Intel E5 v2 I/OAT" rev 0x04 at pci0 dev 4 function 6 not configured
| "Intel E5 v2 I/OAT" rev 0x04 at pci0 dev 4 function 7 not configured
| "Intel E5 v2 Address Map" rev 0x04 at pci0 dev 5 function 0 not configured
| "Intel E5 v2 IIO RAS" rev 0x04 at pci0 dev 5 function 2 not configured
| ppb4 at pci0 dev 17 function 0 "Intel C600 Virtual PCIE" rev 0x05
| pci5 at ppb4 bus 5
| "Intel C600 MEI" rev 0x05 at pci0 dev 22 function 0 not configured
| "Intel C600 MEI" rev 0x05 at pci0 dev 22 function 1 not configured
| ehci0 at pci0 dev 26 function 0 "Intel C600 USB" rev 0x05: apic 0 int 23
| usb0 at ehci0: USB revision 2.0
| uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev
| 2.00/1.00 addr 1
| ppb5 at pci0 dev 28 function 0 "Intel C600 PCIE" rev 0xb5
| pci6 at ppb5 bus 6
| ppb6 at pci0 dev 28 function 4 "Intel C600 PCIE" rev 0xb5
| pci7 at ppb6 bus 7
| em0 at pci7 dev 0 function 0 "Intel I350" rev 0x01: msi, address
| ec:f4:bb:c0:39:4c
| em1 at pci7 dev 0 function 1 "Intel I350" rev 0x01: msi, address
| ec:f4:bb:c0:39:4d
| ppb7 at pci0 dev 28 function 7 "Intel C600 PCIE" rev 0xb5
| pci8 at ppb7 bus 8
| ppb8 at pci8 dev 0 function 0 "Renesas SH7757 PCIE Switch" rev 0x00
| pci9 at ppb8 bus 9
| ppb9 at pci9 dev 0 function 0 "Renesas SH7757 PCIE Switch" rev 0x00
| pci10 at ppb9 bus 10
| ppb10 at pci10 dev 0 function 0 "Renesas SH7757 PCIE-PCI" rev 0x00
| pci11 at ppb10 bus 11
| vga1 at pci11 dev 0 function 0 "Matrox MGA G200eR" rev 0x00
| wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
| wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
| ppb11 at pci9 dev 1 function 0 "Renesas SH7757 PCIE Switch" rev 0x00
| pci12 at ppb11 bus 12
| ehci1 at pci0 dev 29 function 0 "Intel C600 USB" rev 0x05: apic 0 int 22
| usb1 at ehci1: USB revision 2.0
| uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev
| 2.00/1.00 addr 1
| ppb12 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xa5
| pci13 at ppb12 bus 13
| pcib0 at pci0 dev 31 function 0 "Intel C600 LPC" rev 0x05
| ahci0 at pci0 dev 31 function 2 "Intel C600 AHCI" rev 0x05: msi, AHCI 1.3
| ahci0: port 4: 1.5Gb/s
| scsibus3 at ahci0: 32 targets
| cd0 at scsibus3 targ 4 lun 0: <TSSTcorp, DVD+-RW SU-208FB, D150> ATAPI
| 5/cdrom removable
| isa0 at pcib0
| isadma0 at isa0
| com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
| com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
| com1: console
| pckbc0 at isa0 port 0x60/5 irq 1 irq 12
| pcppi0 at isa0 port 0x61
| spkr0 at pcppi0
| pci14 at mainbus0 bus 64
| pci15 at mainbus0 bus 63
| "Intel E5 v2 QPI Link" rev 0x04 at pci15 dev 8 function 0 not configured
| "Intel E5 v2 QPI Link" rev 0x04 at pci15 dev 9 function 0 not configured
| "Intel E5 v2 PCU" rev 0x04 at pci15 dev 10 function 0 not configured
| "Intel E5 v2 PCU" rev 0x04 at pci15 dev 10 function 1 not configured
| "Intel E5 v2 PCU" rev 0x04 at pci15 dev 10 function 2 not configured
| "Intel E5 v2 PCU" rev 0x04 at pci15 dev 10 function 3 not configured
| "Intel E5 v2 UBOX" rev 0x04 at pci15 dev 11 function 0 not configured
| "Intel E5 v2 UBOX" rev 0x04 at pci15 dev 11 function 3 not configured
| "Intel E5 v2 Unicast" rev 0x04 at pci15 dev 12 function 0 not configured
| "Intel E5 v2 Unicast" rev 0x04 at pci15 dev 12 function 1 not configured
| "Intel E5 v2 Unicast" rev 0x04 at pci15 dev 12 function 2 not configured
| "Intel E5 v2 Unicast" rev 0x04 at pci15 dev 12 function 3 not configured
| "Intel E5 v2 Unicast" rev 0x04 at pci15 dev 12 function 4 not configured
| "Intel E5 v2 Unicast" rev 0x04 at pci15 dev 13 function 0 not configured
| "Intel E5 v2 Unicast" rev 0x04 at pci15 dev 13 function 1 not configured
| "Intel E5 v2 Unicast" rev 0x04 at pci15 dev 13 function 2 not configured
| "Intel E5 v2 Unicast" rev 0x04 at pci15 dev 13 function 3 not configured
| "Intel E5 v2 Unicast" rev 0x04 at pci15 dev 13 function 4 not configured
| "Intel E5 v2 Home Agent" rev 0x04 at pci15 dev 14 function 0 not configured
| "Intel E5 v2 Home Agent" rev 0x04 at pci15 dev 14 function 1 not configured
| "Intel E5 v2 TA" rev 0x04 at pci15 dev 15 function 0 not configured
| "Intel E5 v2 RAS" rev 0x04 at pci15 dev 15 function 1 not configured
| "Intel E5 v2 TAD" rev 0x04 at pci15 dev 15 function 2 not configured
| "Intel E5 v2 TAD" rev 0x04 at pci15 dev 15 function 3 not configured
| "Intel E5 v2 TAD" rev 0x04 at pci15 dev 15 function 4 not configured
| "Intel E5 v2 TAD" rev 0x04 at pci15 dev 15 function 5 not configured
| "Intel E5 v2 Thermal" rev 0x04 at pci15 dev 16 function 0 not configured
| "Intel E5 v2 Thermal" rev 0x04 at pci15 dev 16 function 1 not configured
| "Intel E5 v2 Error" rev 0x04 at pci15 dev 16 function 2 not configured
| "Intel E5 v2 Error" rev 0x04 at pci15 dev 16 function 3 not configured
| "Intel E5 v2 Thermal" rev 0x04 at pci15 dev 16 function 4 not configured
| "Intel E5 v2 Thermal" rev 0x04 at pci15 dev 16 function 5 not configured
| "Intel E5 v2 Error" rev 0x04 at pci15 dev 16 function 7 not configured
| "Intel E5 v2 R2PCIE" rev 0x04 at pci15 dev 19 function 0 not configured
| "Intel E5 v2 QPI Link Monitor" rev 0x04 at pci15 dev 19 function 1 not
| configured
| "Intel E5 v2 QPI" rev 0x04 at pci15 dev 19 function 4 not configured
| "Intel E5 v2 QPI Link Monitor" rev 0x04 at pci15 dev 19 function 5 not
| configured
| "Intel E5 v2 SAD" rev 0x04 at pci15 dev 22 function 0 not configured
| "Intel E5 v2 Broadcast" rev 0x04 at pci15 dev 22 function 1 not configured
| "Intel E5 v2 Broadcast" rev 0x04 at pci15 dev 22 function 2 not configured
| pci16 at mainbus0 bus 127
| vmm0 at mainbus0: VMX/EPT
| uhub2 at uhub0 port 1 configuration 1 interface 0 "Intel Rate Matching
| Hub" rev 2.00/0.00 addr 2
| uhub3 at uhub2 port 6 configuration 1 interface 0 "no manufacturer
| Gadget USB HUB" rev 2.00/0.00 addr 3
| uhub4 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching
| Hub" rev 2.00/0.00 addr 2
| vscsi0 at root
| scsibus4 at vscsi0: 256 targets
| softraid0 at root
| scsibus5 at softraid0: 256 targets
| root on sd0a (713329dafa4b5514.a) swap on sd0b dump on sd0b
| uhidev0 at uhub3 port 1 configuration 1 interface 0 "Avocent
| Keyboard/Mouse Function" rev 2.00/0.00 addr 4
| uhidev0: iclass 3/1
| ukbd0 at uhidev0: 8 variable keys, 6 key codes
| wskbd0 at ukbd0: console keyboard, using wsdisplay0
| uhidev1 at uhub3 port 1 configuration 1 interface 1 "Avocent
| Keyboard/Mouse Function" rev 2.00/0.00 addr 4
| uhidev1: iclass 3/1
| ums0 at uhidev1: 3 buttons, Z dir
| wsmouse0 at ums0 mux 0
| uhidev2 at uhub3 port 1 configuration 1 interface 2 "Avocent
| Keyboard/Mouse Function" rev 2.00/0.00 addr 4
| uhidev2: iclass 3/1
| ums1 at uhidev2: 3 buttons, Z dir
| wsmouse1 at ums1 mux 0
|
--
>++++++++[<++++++++++>-]<+++++++.>+++[<------>-]<.>+++[<+
+++++++++++>-]<.>++[<------------>-]<+.--------------.[-]
http://www.weirdnet.nl/
