Hello,
I have a Dlink DWL-122 USB interface which I decided to try randomly to
see if it worked or not.
The access points I tested with were open & not using any encryption,
either selected automatically by the interface when it came up or one I
setup manually.
Shortly after bringing the interface up & associating with an access
point the system will panic with:
wi0: device timeout
uvw_fault(0xd0bb3760, 0x0, 0, 0) -> e
kernel: page fault trap, code=0
stopped at wi_cor_reset+0x31: call *0(%edx)
trace
wi_core_reset(d3c2f000, d3c2f014, 60, 0, 1) at wi_cor_reset+0x31
wi_watchdog(d3c2f030, 10, d0b28a3b, 0, d03a9012) at wi_watchdog+0x2c
wi_usb_thread(d3c2f000) at wi_usb_thread+0x176
Not sure if this is of use but
1) issuing ifconfig wi0 scan will report
ifconfig: SIOCG80211ALLNODES: Invalid argument
2) Removing the usb device causes the kernel to report
wi0: 1 usb errors on rx: IOERROR
wi0 detached
OpenBSD 6.0-current (GENERIC.MP) #98: Tue Jan 3 21:07:10 MST 2017
[email protected]:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Genuine Intel(R) CPU L2400 @ 1.66GHz ("GenuineIntel" 686-class)
1.67 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,SSE3,MWAIT,VMX,EST,TM2,xTPR,PDCM,PERF,SENSOR
real mem = 2145079296 (2045MB)
avail mem = 2091241472 (1994MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: date 06/23/99, BIOS32 rev. 0 @ 0xfd47b, SMBIOS rev.
2.7 @ 0x7fb33020 (8 entries)
bios0: vendor coreboot version "CBET4000 7BETD8WW (2.19 )" date 12/12/2016
bios0: LENOVO 17045LG
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SSDT MCFG TCPA APIC HPET
acpi0: wakeup devices HDEF(S4) USB1(S4) USB2(S4) USB3(S4) USB4(S4)
EHC1(S4) SLT1(S4) SLT2(S4) SLT3(S4) SLT6(S4) LANC(S3) LANR(S3) MODM(S4)
SLPB(S3) LID_(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimcfg0 at acpi0 addr 0xf0000000, bus 0-63
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 166MHz
cpu0: mwait min=64, max=64, C-substates=0.2.2.2.2, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Genuine Intel(R) CPU L2400 @ 1.66GHz ("GenuineIntel" 686-class)
1.67 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,SSE3,MWAIT,VMX,EST,TM2,xTPR,PDCM,PERF,SENSOR
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEGP)
acpiprt2 at acpi0: bus 1 (RP01)
acpiprt3 at acpi0: bus 2 (RP02)
acpiprt4 at acpi0: bus 3 (RP03)
acpiprt5 at acpi0: bus 4 (RP04)
acpiprt6 at acpi0: bus -1 (RP05)
acpiprt7 at acpi0: bus -1 (RP06)
acpiprt8 at acpi0: bus 5 (PCIB)
acpiec0 at acpi0
acpicpu0 at acpi0
C1: bogo buffer
C2: bogo buffer
C3: bogo buffer: !C3(@35 io@0x515), !C2(@1 io@0x514), C1(@1 halt!), PSS
acpicpu1 at acpi0
C1: bogo buffer
C2: bogo buffer
C3: bogo buffer: C1(@1 halt!), PSS
acpitz0 at acpi0: critical temperature is 127 degC
acpitz1 at acpi0: critical temperature is 99 degC
acpithinkpad0 at acpi0
acpiac0 at acpi0: AC unit online
acpibat0 at acpi0: BAT0 model "93P5030" serial 1027 type LION oem "SANYO"
acpibat1 at acpi0: BAT1 not present
acpibtn0 at acpi0: SLPB
acpibtn1 at acpi0: LID_
"PNP0303" at acpi0 not configured
"PNP0F13" at acpi0 not configured
"PNP0501" at acpi0 not configured
"GOOGCB00" at acpi0 not configured
acpidock0 at acpi0: DOCK not docked (0)
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: LCD0
bios0: ROM list: 0xc0000/0xea00! 0xee800/0x1800!
cpu0: Enhanced SpeedStep 1663 MHz: speeds: 1666, 1333, 1000 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82945GM Host" rev 0x03
inteldrm0 at pci0 dev 2 function 0 "Intel 82945GM Video" rev 0x03
drm0 at inteldrm0
intagp0 at inteldrm0
agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
inteldrm0: apic 2 int 16
inteldrm0: 1024x768
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
"Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: msi
azalia0: codecs: Analog Devices AD1981HD, Conexant/0x2bfa, using Analog
Devices AD1981HD
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: apic 2 int 20
pci1 at ppb0 bus 1
em0 at pci1 dev 0 function 0 "Intel 82573L" rev 0x00: msi, address 00:16:d3:
ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02
pci2 at ppb1 bus 2
ral0 at pci2 dev 0 function 0 "Ralink RT3090" rev 0x00: apic 2 int 17,
address 6c:62:6d:
ral0: MAC/BBP RT3090 (rev 0x3213), RF RT3020 (MIMO 1T1R)
ppb2 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x02
pci3 at ppb2 bus 3
ppb3 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x02
pci4 at ppb3 bus 4
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 2 int 16
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 2 int 17
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 2 int 18
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 2 int 19
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 2 int 19
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev
2.00/1.00 addr 1
ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
pci5 at ppb4 bus 5
cbb0 at pci5 dev 0 function 0 "Ricoh 5C476 CardBus" rev 0xb4: apic 2 int 16
"Ricoh 5C552 Firewire" rev 0x09 at pci5 dev 0 function 1 not configured
sdhc0 at pci5 dev 0 function 2 "Ricoh 5C822 SD/MMC" rev 0x18: apic 2 int 18
sdhc0: SDHC 1.0, 33 MHz base clock
sdmmc0 at sdhc0: 4-bit
"Ricoh 5C843 MMC" rev 0x00 at pci5 dev 0 function 3 not configured
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 6 device 0 cacheline 0x0, lattimer 0x20
pcmcia0 at cardslot0
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02: PM
disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x02: DMA,
channel 0 configured to compatibility, channel 1 configured to compatibility
pciide0: channel 0 ignored (disabled)
pciide0: channel 1 ignored (disabled)
ahci0 at pci0 dev 31 function 2 "Intel 82801GBM AHCI" rev 0x02: msi,
AHCI 1.1
ahci0: port 0: 1.5Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, FUJITSU MHV2080B, 0084> SCSI3
0/direct fixed t10.ATA_FUJITSU_MHV2080BH_
sd0: 76319MB, 512 bytes/sector, 156301488 sectors
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic 2
int 23
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM
spdmem1 at iic0 addr 0x51: 1GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 configuration 1 interface 0 "Intel UHCI root hub" rev
1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev
1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 configuration 1 interface 0 "Intel UHCI root hub" rev
1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 configuration 1 interface 0 "Intel UHCI root hub" rev
1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
aps0 at isa0 port 0x1600/31
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
vmm0 at mainbus0: VMX
wi0 at uhub3 port 1 configuration 1 interface 0 "D-Link DWL-122" rev
1.10/1.32 addr 2
wi0: PRISM3 (USB) (0x8026), Firmware 1.1.3 (primary), 1.7.1 (station),
address 00:13:46:
ugen0 at uhub4 port 2 "STMicroelectronics Biometric Coprocessor" rev
1.00/0.01 addr 2
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (9674d12345fb9aa6.a) swap on sd0b dump on sd0b
WARNING: / was not properly unmounted
clock: unknown CMOS layout
