... it just sits here forever.
Using hostserver's archive I bisected miniroots and found that
this one works:
https://ftp.hostserver.de/archive/2017-03-07-0105/snapshots/armv7/miniroot-panda-61.fs
OpenBSD 6.1-beta (RAMDISK) #52: Sun Mar 5 15:11:37 MST 2017
U-Boot SPL 2016.11 (Dec 24 2016 - 09:08:50)
OMAP4460-GP ES1.1
Trying to boot from MMC1
SPL: Please implement spl_start_uboot() for your board
SPL: Direct Linux boot not active!
reading u-boot.img
reading u-boot.img
U-Boot 2016.11 (Dec 24 2016 - 09:08:50 -0700)
CPU : OMAP4460-GP ES1.1
Board: OMAP4 Panda
I2C: ready
DRAM: 1 GiB
MMC: OMAP SD/MMC: 0
reading uboot.env
** Unable to read "uboot.env" from mmc0:1 **
Using default environment
Net: No ethernet found.
Hit any key to stop autoboot: 0
switch to partitions #0, OK
mmc0 is current device
SD/MMC found on device 0
reading boot.scr
** Unable to read file boot.scr **
reading uEnv.txt
** Unable to read file uEnv.txt **
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
reading /omap4-panda-es.dtb
58423 bytes read in 8 ms (7 MiB/s)
Found EFI removable media binary efi/boot/bootarm.efi
reading efi/boot/bootarm.efi
64684 bytes read in 10 ms (6.2 MiB/s)
## Starting EFI application at 0x82000000 ...
CACHE: Misaligned operation at range [bcf36000, bcf45cac]
Scanning disks on usb...
Scanning disks on mmc...
MMC Device 1 not found
MMC Device 2 not found
MMC Device 3 not found
Found 5 disks
>> OpenBSD/armv7 BOOTARM 0.5
boot>
cannot open sd0a:/etc/random.seed: No such file or directory
booting sd0a:/bsd: 2168072+7992960+438796 [80+305024+146122]=0xa90cc4
OpenBSD/armv7 booting ...
arg0 0xc0d90cc4 arg1 0xae7 arg2 0x88000000
Allocating page tables
freestart = 0x80d91000, free_pages = 258671 (0x0003f26f)
[...]
and this one is busted:
https://ftp.hostserver.de/archive/2017-03-09-0105/snapshots/armv7/miniroot-panda-61.fs
OpenBSD 6.1-beta (RAMDISK) #54: Wed Mar 8 02:59:20 MST 2017
U-Boot SPL 2017.01 (Feb 04 2017 - 18:38:04)
OMAP4460-GP ES1.1
Trying to boot from MMC1SPL: Please implement spl_start_uboot() for your board
SPL: Direct Linux boot not active!
reading u-boot.img
reading u-boot.img
[and then nothing]
Using a working miniroot I can install the system and then use bsd.rd
to upgrade the system past the breakage.
Thanks,
Florian
U-Boot SPL 2017.01 (Feb 04 2017 - 18:38:04)
OMAP4460-GP ES1.1
Trying to boot from MMC1SPL: Please implement spl_start_uboot() for your board
SPL: Direct Linux boot not active!
reading u-boot.img
reading u-boot.img
U-Boot 2017.01 (Feb 04 2017 - 18:38:04 -0700)
CPU : OMAP4460-GP ES1.1
Board: OMAP4 Panda
I2C: ready
DRAM: 1 GiB
MMC: OMAP SD/MMC: 0
reading uboot.env
** Unable to read "uboot.env" from mmc0:1 **
Using default environment
Net: No ethernet found.
Hit any key to stop autoboot: 0
switch to partitions #0, OK
mmc0 is current device
SD/MMC found on device 0
reading boot.scr
** Unable to read file boot.scr **
reading uEnv.txt
** Unable to read file uEnv.txt **
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
reading /omap4-panda-es.dtb
58423 bytes read in 7 ms (8 MiB/s)
Found EFI removable media binary efi/boot/bootarm.efi
reading efi/boot/bootarm.efi
64684 bytes read in 9 ms (6.9 MiB/s)
## Starting EFI application at 82000000 ...
Scanning disks on usb...
Scanning disks on mmc...
MMC Device 1 not found
MMC Device 2 not found
MMC Device 3 not found
Found 5 disks
>> OpenBSD/armv7 BOOTARM 0.5
boot>
booting sd0a:/bsd: 3826824+161024+495360 [80+507136+237956]=0x4fe470
OpenBSD/armv7 booting ...
arg0 0xc07fe470 arg1 0xae7 arg2 0x88000000
Allocating page tables
freestart = 0x807ff000, free_pages = 260097 (0x0003f801)
IRQ stack: p0x8082d000 v0xc082d000
ABT stack: p0x8082e000 v0xc082e000
UND stack: p0x8082f000 v0xc082f000
SVC stack: p0x80830000 v0xc0830000
Creating L1 page table at 0x80800000
Mapping kernel
Constructing L2 page tables
undefined page pmap [ using 745584 bytes of bsd ELF symbol table ]
board type: 2791
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2017 OpenBSD. All rights reserved. https://www.OpenBSD.org
OpenBSD 6.1-beta (GENERIC) #82: Fri Mar 24 15:03:38 MDT 2017
[email protected]:/usr/src/sys/arch/armv7/compile/GENERIC
real mem = 1073741824 (1024MB)
avail mem = 1044316160 (995MB)
mainbus0 at root: TI OMAP4 PandaBoard-ES
cpu0 at mainbus0: ARM Cortex A9 R2 rev 10 (ARMv7 core)
cpu0: DC enabled IC enabled WB disabled EABT branch prediction enabled
cpu0: 32KB(32b/l,4way) I-cache, 32KB(32b/l,4way) wr-back D-cache
cortex0 at mainbus0
amptimer0 at cortex0: tick rate 396000 KHz
armliicc0 at cortex0: rtl 7 waymask: 0x0000000f
omap0 at mainbus0
omapid0 at omap0: omap4460
amptimer0: adjusting clock: new tick rate 350000 KHz
prcm0 at omap0 rev 0.0
ampintc0 at mainbus0 nirq 160, ncpu 2
omwugen0 at mainbus0
simplebus0 at mainbus0: "ocp"
simplebus1 at simplebus0: "l4"
simplebus2 at simplebus1: "scm"
simplebus3 at simplebus1: "scm"
ompinmux0 at simplebus3
simplebus4 at simplebus3: "omap4_padconf_global"
simplebus5 at simplebus1: "l4"
ompinmux1 at simplebus5
omgpio0 at simplebus0: rev 0.1
gpio0 at omgpio0: 32 pins
omgpio1 at simplebus0: rev 0.1
gpio1 at omgpio1: 32 pins
omgpio2 at simplebus0: rev 0.1
gpio2 at omgpio2: 32 pins
omgpio3 at simplebus0: rev 0.1
gpio3 at omgpio3: 32 pins
omgpio4 at simplebus0: rev 0.1
gpio4 at omgpio4: 32 pins
omgpio5 at simplebus0: rev 0.1
gpio5 at omgpio5: 32 pins
com0 at simplebus0: ti16750, 64 byte fifo
com0: probed fifo depth: 0 bytes
com1 at simplebus0: ti16750, 64 byte fifo
com1: probed fifo depth: 0 bytes
com2 at simplebus0: ti16750, 64 byte fifo
com2: console
com3 at simplebus0: ti16750, 64 byte fifo
com3: probed fifo depth: 0 bytes
tiiic0 at simplebus0 rev 0.11
iic0 at tiiic0
"ti,twl6030" at iic0 addr 0x48 not configured
"ti,twl6040" at iic0 addr 0x4b not configured
tiiic1 at simplebus0 rev 0.11
iic1 at tiiic1
tiiic2 at simplebus0 rev 0.11
iic2 at tiiic2
"ti,eeprom" at iic2 addr 0x50 not configured
tiiic3 at simplebus0 rev 0.11
iic3 at tiiic3
ommmc0 at simplebus0
sdmmc0 at ommmc0: 8-bit
ommmc1 at simplebus0
sdmmc1 at ommmc1: 1-bit
omdog0 at simplebus0 rev 0.1
omehci0 at simplebus0
usb0 at omehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "TI OMAP EHCI root hub" rev 2.00/1.00
addr 1
sdmmc1: can't supply clock
sdmmc1: can't enable card
scsibus0 at sdmmc0: 2 targets, initiator 0
sd0 at scsibus0 targ 1 lun 0: <SD/MMC, SP16G, 0080> SCSI2 0/direct removable
sd0: 15193MB, 512 bytes/sector, 31116288 sectors
uhub1 at uhub0 port 1 configuration 1 interface 0 "Standard Microsystems
product 0x9514" rev 2.00/2.00 addr 2
smsc0 at uhub1 port 1 configuration 1 interface 0 "Standard Microsystems
SMSC9512/14" rev 2.00/2.00 addr 3
smsc0: address ff:ff:ff:ff:ff:ff
ukphy0 at smsc0 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI
0x0001f0, model 0x000c
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
boot device: sd0
root on sd0a (a0dc7aae54c0fe26.a) swap on sd0b dump on sd0b
WARNING: CHECK AND RESET THE DATE!
Automatic boot in progress: starting file system checks.
/dev/sd0a (a0dc7aae54c0fe26.a): file system is clean; not checking
/dev/sd0l (a0dc7aae54c0fe26.l): file system is clean; not checking
/dev/sd0d (a0dc7aae54c0fe26.d): file system is clean; not checking
/dev/sd0f (a0dc7aae54c0fe26.f): file system is clean; not checking
/dev/sd0g (a0dc7aae54c0fe26.g): file system is clean; not checking
/dev/sd0h (a0dc7aae54c0fe26.h): file system is clean; not checking
/dev/sd0k (a0dc7aae54c0fe26.k): file system is clean; not checking
/dev/sd0j (a0dc7aae54c0fe26.j): file system is clean; not checking
/dev/sd0e (a0dc7aae54c0fe26.e): file system is clean; not checking
setting tty flags
pf enabled
starting network
DHCPREQUEST on smsc0 to 255.255.255.255
DHCPNACK from 192.168.178.1 (54:67:51:de:e7:ce)
DHCPDISCOVER on smsc0 - interval 1
DHCPDISCOVER on smsc0 - interval 2
DHCPOFFER from 192.168.178.1 (54:67:51:de:e7:ce)
DHCPREQUEST on smsc0 to 255.255.255.255
DHCPACK from 192.168.178.1 (54:67:51:de:e7:ce)
bound to 192.168.178.130 -- renewal in 1800 seconds.
reordering libraries: done.
starting early daemons: syslogd pflogd ntpd.
starting RPC daemons:.
savecore: no core dump
checking quotas: done.
clearing /tmp
kern.securelevel: 0 -> 1
creating runtime link editor directory cache.
preserving editor files.
starting network daemons: sshd smtpd sndiod.
starting local daemons: cron.
Fri Mar 24 22:55:53 CET 2017
OpenBSD/armv7 (panda.home) (console)
login:
--
I'm not entirely sure you are real.
