On Fri, Jul 14, 2017 at 08:19:37AM BST, Paul de Weerd wrote:
> On Thu, Jul 13, 2017 at 09:30:27PM +0100, Stuart Henderson wrote:
> | > > Section "Device"
> | > > Identifier "Intel Graphics"
> | > > Driver "intel"
> | > > EndSection
> | >
> | > Is this regression important enough to hold off the commit of the
> | > driver selection change until we have a better understanding of what
> | > is going wrong here?
> |
> | I don't think it's important enough to hold off at this point. We have
> | a viable workaround for now, imho we should get more people running with
> | modesetting to give us more experience with it.
>
> I agree with Stuart. The workaround (manually reverting back to the
> intel driver) works fine when necessary.
>
> Also, if there are other ports that are similarly affected, we should
> probably find them sooner rather than later. Defaulting to
> modesetting will help here, I think.
>
> | > And does this only affect Haswell or are others also affected?
> |
> | I don't have much of a range of hardware to test with, but I've just
> | tried on an X201 (i7-620M - Ironlake), which is now using the modesetting
> | driver by default too, and doesn't have a problem with vncviewer.
>
> I see the same problem on an i7-3537U (which I believe is Ivy Bridge;
> dmesg and Xorg.0.log included below).
I observe the same thing on i7-3770 (also Ivy Bridge) and the above
xorg.conf entry also resolves the issue for me.
Cheers,
Raf
OpenBSD 6.1-current (GENERIC.MP) #96: Thu Jul 13 19:31:55 MDT 2017
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 8450408448 (8058MB)
avail mem = 8188510208 (7809MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xeceb0 (83 entries)
bios0: vendor Dell Inc. version "A23" date 08/09/2016
bios0: Dell Inc. OptiPlex 7010
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC FPDT TCPA MCFG HPET SSDT SSDT SSDT DMAR ASF! SSDT
SLIC BGRT
acpi0: wakeup devices P0P1(S4) USB1(S3) USB2(S3) USB3(S3) USB4(S3) USB5(S3)
USB6(S3) USB7(S3) PXSX(S4) RP01(S4) PXSX(S4) RP02(S4) PXSX(S4) RP03(S4)
PXSX(S4) RP04(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz, 3392.88 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: TSC frequency 3392880640 Hz
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.1, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz, 3392.30 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 4 (application processor)
cpu2: Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz, 3392.30 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 0, core 2, package 0
cpu3 at mainbus0: apid 6 (application processor)
cpu3: Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz, 3392.30 MHz
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 0, core 3, package 0
cpu4 at mainbus0: apid 1 (application processor)
cpu4: Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz, 3392.30 MHz
cpu4:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu4: 256KB 64b/line 8-way L2 cache
cpu4: smt 1, core 0, package 0
cpu5 at mainbus0: apid 3 (application processor)
cpu5: Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz, 3392.30 MHz
cpu5:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu5: 256KB 64b/line 8-way L2 cache
cpu5: smt 1, core 1, package 0
cpu6 at mainbus0: apid 5 (application processor)
cpu6: Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz, 3392.30 MHz
cpu6:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu6: 256KB 64b/line 8-way L2 cache
cpu6: smt 1, core 2, package 0
cpu7 at mainbus0: apid 7 (application processor)
cpu7: Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz, 3392.30 MHz
cpu7:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu7: 256KB 64b/line 8-way L2 cache
cpu7: smt 1, core 3, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (P0P1)
acpiprt2 at acpi0: bus -1 (RP01)
acpiprt3 at acpi0: bus -1 (RP02)
acpiprt4 at acpi0: bus -1 (RP03)
acpiprt5 at acpi0: bus -1 (RP04)
acpiprt6 at acpi0: bus -1 (RP05)
acpiprt7 at acpi0: bus -1 (RP06)
acpiprt8 at acpi0: bus -1 (RP07)
acpiprt9 at acpi0: bus -1 (RP08)
acpiprt10 at acpi0: bus -1 (PEG0)
acpiprt11 at acpi0: bus -1 (PEG1)
acpiprt12 at acpi0: bus -1 (PEG2)
acpiprt13 at acpi0: bus -1 (PEG3)
acpiec0 at acpi0: not present
acpicpu0 at acpi0: C3(350@80 mwait.1@0x20), C2(500@59 mwait.1@0x10), C1(1000@1
mwait.1), PSS
acpicpu1 at acpi0: C3(350@80 mwait.1@0x20), C2(500@59 mwait.1@0x10), C1(1000@1
mwait.1), PSS
acpicpu2 at acpi0: C3(350@80 mwait.1@0x20), C2(500@59 mwait.1@0x10), C1(1000@1
mwait.1), PSS
acpicpu3 at acpi0: C3(350@80 mwait.1@0x20), C2(500@59 mwait.1@0x10), C1(1000@1
mwait.1), PSS
acpicpu4 at acpi0: C3(350@80 mwait.1@0x20), C2(500@59 mwait.1@0x10), C1(1000@1
mwait.1), PSS
acpicpu5 at acpi0: C3(350@80 mwait.1@0x20), C2(500@59 mwait.1@0x10), C1(1000@1
mwait.1), PSS
acpicpu6 at acpi0: C3(350@80 mwait.1@0x20), C2(500@59 mwait.1@0x10), C1(1000@1
mwait.1), PSS
acpicpu7 at acpi0: C3(350@80 mwait.1@0x20), C2(500@59 mwait.1@0x10), C1(1000@1
mwait.1), PSS
acpitz0 at acpi0: critical temperature is 106 degC
acpitz1 at acpi0: critical temperature is 106 degC
"INT3F0D" at acpi0 not configured
acpibtn0 at acpi0: PWRB
"*pnp0c14" at acpi0 not configured
tpm0 at acpi0: TPM_ addr 0xfed40000/0x5000: device 0x0000104a rev 0x4e
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD01
acpivout at acpivideo0 not configured
acpivout at acpivideo0 not configured
acpivout at acpivideo0 not configured
acpivout at acpivideo0 not configured
acpivout at acpivideo0 not configured
acpivout at acpivideo0 not configured
acpivout at acpivideo0 not configured
cpu0: Enhanced SpeedStep 3392 MHz: speeds: 3401, 3400, 3300, 3100, 3000, 2900,
2800, 2600, 2500, 2400, 2200, 2100, 2000, 1900, 1700, 1600 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 3G Host" rev 0x09
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 4000" rev 0x09
drm0 at inteldrm0
inteldrm0: msi
inteldrm0: 1920x1200, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
xhci0 at pci0 dev 20 function 0 "Intel 7 Series xHCI" rev 0x04: msi
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00
addr 1
"Intel 7 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
em0 at pci0 dev 25 function 0 "Intel 82579LM" rev 0x04: msi, address
b8:ca:3a:9a:e3:ef
ehci0 at pci0 dev 26 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 16
usb1 at ehci0: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
addr 1
azalia0 at pci0 dev 27 function 0 "Intel 7 Series HD Audio" rev 0x04: msi
azalia0: codecs: Realtek ALC269, Intel/0x2806, using Realtek ALC269
audio0 at azalia0
ehci1 at pci0 dev 29 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 23
usb2 at ehci1: USB revision 2.0
uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
addr 1
pcib0 at pci0 dev 31 function 0 vendor "Intel", unknown product 0x1e47 rev 0x04
ahci0 at pci0 dev 31 function 2 "Intel 7 Series AHCI" rev 0x04: msi, AHCI 1.3
ahci0: port 0: 6.0Gb/s
ahci0: port 1: 1.5Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, Samsung SSD 850, EMT0> SCSI3 0/direct fixed
naa.5002538d410ad27f
sd0: 238475MB, 512 bytes/sector, 488397168 sectors, thin
cd0 at scsibus1 targ 1 lun 0: <HL-DT-ST, DVD+-RW GT80N, A103> ATAPI 5/cdrom
removable
ichiic0 at pci0 dev 31 function 3 "Intel 7 Series SMBus" rev 0x04: apic 2 int 18
iic0 at ichiic0
spdmem0 at iic0 addr 0x51: 4GB DDR3 SDRAM PC3-12800
spdmem1 at iic0 addr 0x53: 4GB DDR3 SDRAM PC3-12800
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
wbsio0 at isa0 port 0x2e/2 rev 0x00
vmm0 at mainbus0: VMX/EPT
efifb at mainbus0 not configured
uhub3 at uhub0 port 3 configuration 1 interface 0 "Texas Instruments product
0x8142" rev 2.10/1.00 addr 2
uhub4 at uhub3 port 4 configuration 1 interface 0 "Texas Instruments product
0x8142" rev 2.10/1.00 addr 3
uhub5 at uhub0 port 4 configuration 1 interface 0 "Texas Instruments product
0x8142" rev 2.10/1.00 addr 4
uhub6 at uhub5 port 4 configuration 1 interface 0 "Texas Instruments product
0x8142" rev 2.10/1.00 addr 5
uhidev0 at uhub6 port 2 configuration 1 interface 0 "Logitech USB Receiver" rev
2.00/57.01 addr 6
uhidev0: iclass 3/1
ums0 at uhidev0: 16 buttons, Z and W dir
wsmouse0 at ums0 mux 0
uhidev1 at uhub6 port 2 configuration 1 interface 1 "Logitech USB Receiver" rev
2.00/57.01 addr 6
uhidev1: iclass 3/0, 17 report ids
uhid0 at uhidev1 reportid 3: input=4, output=0, feature=0
uhid1 at uhidev1 reportid 16: input=6, output=6, feature=0
uhid2 at uhidev1 reportid 17: input=19, output=19, feature=0
uhub7 at uhub0 port 7 configuration 1 interface 0 "Texas Instruments product
0x8140" rev 3.00/1.00 addr 7
uhub8 at uhub7 port 4 configuration 1 interface 0 "Texas Instruments product
0x8140" rev 3.00/1.00 addr 8
uhub9 at uhub0 port 8 configuration 1 interface 0 "Texas Instruments product
0x8140" rev 3.00/1.00 addr 9
uhub10 at uhub9 port 4 configuration 1 interface 0 "Texas Instruments product
0x8140" rev 3.00/1.00 addr 10
uhub11 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub"
rev 2.00/0.00 addr 2
uhidev2 at uhub11 port 2 configuration 1 interface 0 "Philips Speech Processing
product 0x091a" rev 1.00/3.02 addr 3
uhidev2: iclass 3/1
uhid3 at uhidev2: input=3, output=0, feature=0
uhub12 at uhub11 port 5 configuration 1 interface 0 "Genesys Logic USB2.0 Hub"
rev 2.00/32.98 addr 4
uhidev3 at uhub11 port 6 configuration 1 interface 0 "Holtek daskeyboard" rev
1.10/3.90 addr 5
uhidev3: iclass 3/1
ukbd0 at uhidev3: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev4 at uhub11 port 6 configuration 1 interface 1 "Holtek daskeyboard" rev
1.10/3.90 addr 5
uhidev4: iclass 3/1, 2 report ids
uhid4 at uhidev4 reportid 1: input=6, output=0, feature=0
uhid5 at uhidev4 reportid 2: input=1, output=0, feature=0
uhub13 at uhub2 port 1 configuration 1 interface 0 "Intel Rate Matching Hub"
rev 2.00/0.00 addr 2
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (b7cc2a8a249bd375.a) swap on sd0b dump on sd0b
[ 30.182] (WW) checkDevMem: failed to open /dev/xf86 and /dev/mem
(Operation not permitted)
Check that you have set 'machdep.allowaperture=1'
in /etc/sysctl.conf and reboot your machine
refer to xf86(4) for details
[ 30.182] linear framebuffer access unavailable
[ 30.187] (--) Using wscons driver on /dev/ttyC4
[ 30.207]
X.Org X Server 1.18.4
Release Date: 2016-07-19
[ 30.207] X Protocol Version 11, Revision 0
[ 30.207] Build Operating System: OpenBSD 6.1 amd64
[ 30.207] Current Operating System: OpenBSD itpc00.medschl.cam.ac.uk. 6.1
GENERIC.MP#96 amd64
[ 30.207] Build Date: 13 July 2017 07:47:00PM
[ 30.207]
[ 30.207] Current version of pixman: 0.34.0
[ 30.207] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 30.207] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 30.208] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Jul 14 09:56:20
2017
[ 30.208] (==) Using config file: "/etc/xorg.conf"
[ 30.208] (==) Using system config directory
"/usr/X11R6/share/X11/xorg.conf.d"
[ 30.209] (==) No Layout section. Using the first Screen section.
[ 30.210] (==) No screen section available. Using defaults.
[ 30.210] (**) |-->Screen "Default Screen Section" (0)
[ 30.210] (**) | |-->Monitor "<default monitor>"
[ 30.210] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 30.210] (**) | |-->Device "Intel Graphics"
[ 30.210] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 30.210] (==) Disabling SIGIO handlers for input devices
[ 30.211] (==) Automatically adding devices
[ 30.211] (==) Automatically enabling devices
[ 30.211] (==) Not automatically adding GPU devices
[ 30.211] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 30.211] (==) FontPath set to:
/usr/X11R6/lib/X11/fonts/misc/,
/usr/X11R6/lib/X11/fonts/TTF/,
/usr/X11R6/lib/X11/fonts/OTF/,
/usr/X11R6/lib/X11/fonts/Type1/,
/usr/X11R6/lib/X11/fonts/100dpi/,
/usr/X11R6/lib/X11/fonts/75dpi/
[ 30.211] (==) ModulePath set to "/usr/X11R6/lib/modules"
[ 30.211] (II) The server relies on wscons to provide the list of input
devices.
If no devices become available, reconfigure wscons or disable
AutoAddDevices.
[ 30.211] (II) Loader magic: 0x1008f9f33020
[ 30.211] (II) Module ABI versions:
[ 30.211] X.Org ANSI C Emulation: 0.4
[ 30.211] X.Org Video Driver: 20.0
[ 30.211] X.Org XInput driver : 22.1
[ 30.211] X.Org Server Extension : 9.0
[ 30.212] (--) PCI:*(0:0:2:0) 8086:0162:1028:0577 rev 9, Mem @
0xf7800000/4194304, 0xe0000000/268435456, I/O @ 0x0000f000/64
[ 30.212] (II) LoadModule: "glx"
[ 30.213] (II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
[ 30.224] (II) Module glx: vendor="X.Org Foundation"
[ 30.224] compiled for 1.18.4, module version = 1.0.0
[ 30.224] ABI class: X.Org Server Extension, version 9.0
[ 30.224] (==) AIGLX enabled
[ 30.225] (II) LoadModule: "intel"
[ 30.226] (II) Loading /usr/X11R6/lib/modules/drivers/intel_drv.so
[ 30.229] (II) Module intel: vendor="X.Org Foundation"
[ 30.229] compiled for 1.18.4, module version = 2.99.916
[ 30.229] Module class: X.Org Video Driver
[ 30.229] ABI class: X.Org Video Driver, version 20.0
[ 30.229] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 30.230] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[ 30.230] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[ 30.230] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200,
P6300
[ 30.232] (II) intel(0): Using Kernel Mode Setting driver: i915, version
1.6.0 20151010
[ 30.235] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics
4000
[ 30.235] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx
[ 30.235] (II) intel(0): Creating default Display subsection in Screen
section
"Default Screen Section" for depth/fbbpp 24/32
[ 30.235] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 30.235] (==) intel(0): RGB weight 888
[ 30.235] (==) intel(0): Default visual is TrueColor
[ 30.237] (II) intel(0): Output VGA1 has no monitor section
[ 30.237] (II) intel(0): Enabled output VGA1
[ 30.237] (II) intel(0): Output HDMI1 has no monitor section
[ 30.237] (II) intel(0): Enabled output HDMI1
[ 30.238] (II) intel(0): Output DP1 has no monitor section
[ 30.238] (II) intel(0): Enabled output DP1
[ 30.238] (II) intel(0): Output HDMI2 has no monitor section
[ 30.238] (II) intel(0): Enabled output HDMI2
[ 30.238] (II) intel(0): Output DP2 has no monitor section
[ 30.238] (II) intel(0): Enabled output DP2
[ 30.238] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[ 30.238] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 30.238] (II) intel(0): Enabled output VIRTUAL1
[ 30.238] (--) intel(0): Output DP1 using initial mode 1920x1200 on pipe 0
[ 30.238] (--) intel(0): Output DP2 using initial mode 1920x1200 on pipe 1
[ 30.238] (==) intel(0): TearFree disabled
[ 30.238] (==) intel(0): DPI set to (96, 96)
[ 30.238] (II) Loading sub module "dri2"
[ 30.238] (II) LoadModule: "dri2"
[ 30.238] (II) Module "dri2" already built-in
[ 30.238] (II) Loading sub module "present"
[ 30.238] (II) LoadModule: "present"
[ 30.238] (II) Module "present" already built-in
[ 30.238] (==) Depth 24 pixmap format is 32 bpp
[ 30.242] (II) intel(0): SNA initialized with Ivybridge (gen7, gt2) backend
[ 30.242] (==) intel(0): Backing store enabled
[ 30.243] (==) intel(0): Silken mouse disabled
[ 30.243] (II) intel(0): HW Cursor enabled
[ 30.243] (II) intel(0): RandR 1.2 enabled, ignore the following RandR
disabled message.
[ 30.245] (==) intel(0): DPMS enabled
[ 30.246] (II) intel(0): [DRI2] Setup complete
[ 30.246] (II) intel(0): [DRI2] DRI driver: i965
[ 30.246] (II) intel(0): [DRI2] VDPAU driver: i965
[ 30.246] (II) intel(0): direct rendering: DRI2 enabled
[ 30.246] (II) intel(0): hardware support for Present enabled
[ 30.246] (--) RandR disabled
[ 30.315] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 30.315] (II) AIGLX: enabled GLX_ARB_create_context
[ 30.315] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 30.315] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[ 30.315] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 30.315] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 30.315] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 30.315] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 30.315] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[ 30.315] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 30.315] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[ 30.315] (II) AIGLX: Loaded and initialized i965
[ 30.315] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 30.322] (II) intel(0): switch to mode [email protected] on DP1 using pipe 0,
position (0, 0), rotation normal, reflection none
[ 30.331] (II) intel(0): switch to mode [email protected] on DP2 using pipe 1,
position (0, 0), rotation normal, reflection none
[ 30.343] (II) intel(0): Setting screen physical size to 508 x 317
[ 30.487] (II) config/wscons: checking input device /dev/wskbd
[ 30.487] (II) wskbd: using layout gb
[ 30.487] (II) LoadModule: "kbd"
[ 30.488] (II) Loading /usr/X11R6/lib/modules/input/kbd_drv.so
[ 30.488] (II) Module kbd: vendor="X.Org Foundation"
[ 30.488] compiled for 1.18.4, module version = 1.9.0
[ 30.488] Module class: X.Org XInput Driver
[ 30.488] ABI class: X.Org XInput driver, version 22.1
[ 30.488] (II) Using input driver 'kbd' for '/dev/wskbd'
[ 30.488] (**) /dev/wskbd: always reports core events
[ 30.488] (**) /dev/wskbd: always reports core events
[ 30.489] (**) Option "Protocol" "standard"
[ 30.489] (**) Option "XkbRules" "base"
[ 30.489] (**) Option "XkbModel" "pc105"
[ 30.489] (**) Option "XkbLayout" "gb"
[ 30.489] (II) XINPUT: Adding extended input device "/dev/wskbd" (type:
KEYBOARD, id 6)
[ 30.712] (II) config/wscons: checking input device /dev/wsmouse
[ 30.712] (II) LoadModule: "ws"
[ 30.713] (II) Loading /usr/X11R6/lib/modules/input/ws_drv.so
[ 30.714] (II) Module ws: vendor="X.Org Foundation"
[ 30.714] compiled for 1.18.4, module version = 1.3.0
[ 30.714] Module class: X.Org XInput Driver
[ 30.714] ABI class: X.Org XInput driver, version 22.1
[ 30.714] (II) Using input driver 'ws' for '/dev/wsmouse'
[ 30.714] (**) /dev/wsmouse: always reports core events
[ 30.714] (II) ws: /dev/wsmouse: debuglevel 0
[ 30.714] (**) Option "Device" "/dev/wsmouse"
[ 30.714] (**) ws: /dev/wsmouse: ZAxisMapping: buttons 4 and 5
[ 30.714] (**) ws: /dev/wsmouse: WAxisMapping: buttons 6 and 7
[ 30.714] (**) ws: /dev/wsmouse: associated screen: 0
[ 30.714] (II) ws: /dev/wsmouse: minimum x position: 0
[ 30.714] (II) ws: /dev/wsmouse: maximum x position: 1919
[ 30.714] (II) ws: /dev/wsmouse: minimum y position: 0
[ 30.714] (II) ws: /dev/wsmouse: maximum y position: 1199
[ 30.714] (==) ws: /dev/wsmouse: Buttons: 7
[ 30.717] (**) ws: /dev/wsmouse: YAxisMapping: buttons 4 and 5
[ 30.717] (II) XINPUT: Adding extended input device "/dev/wsmouse" (type:
MOUSE, id 7)
[ 30.717] (**) /dev/wsmouse: (accel) keeping acceleration scheme 1
[ 30.717] (**) /dev/wsmouse: (accel) acceleration profile 0
[ 30.717] (**) /dev/wsmouse: (accel) acceleration factor: 2.000
[ 30.717] (**) /dev/wsmouse: (accel) acceleration threshold: 4
[ 76.719] (II) intel(0): resizing framebuffer to 3840x1200
[ 76.732] (II) intel(0): switch to mode [email protected] on DP2 using pipe 1,
position (1920, 0), rotation normal, reflection none
