On Wed, Jul 19, 2017 at 11:28 AM, Stefan Sperling <[email protected]> wrote:
> On Wed, Jul 19, 2017 at 11:21:09AM -0500, Abel Abraham Camarillo Ojeda wrote:
>> urtwn0: timeout waiting for firmware readiness
>> urtwn0: timeout waiting for firmware readiness
>> urtwn0: timeout waiting for firmware readiness
>
> I have the same RTL8188EU adapter you use, and it works for me.
> Since the same adapter also works for you in another machine,
> I suspect there is a USB support issue with your affected machine.
> Perhaps the device is not getting sufficient power to operate?
>
> What is the equivalent debug output you get for iwm?
# ifconfig iwm0
iwm0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
lladdr e4:b3:18:a4:88:b9
index 1 priority 4 llprio 3
groups: wlan
media: IEEE802.11 autoselect
status: no network
ieee80211: nwid ""
#
# ifconfig iwm0 debug
# ifconfig iwm0 scan
iwm0: flags=8806<BROADCAST,DEBUG,SIMPLEX,MULTICAST> mtu 1500
lladdr e4:b3:18:a4:88:b9
index 1 priority 4 llprio 3
groups: wlan
media: IEEE802.11 autoselect
status: no network
ieee80211: nwid ""
nwid aglaya chan 6 bssid c4:6e:1f:f3:2c:d0 95% HT-MCS7
privacy,short_preamble,short_slottime,wpa1
nwid INFINITUM6CFC_2.4 chan 11 bssid f4:9e:ef:5f:3f:a3
49% HT-MCS23 privacy,short_slottime,wpa2
nwid Wifi-Repeater chan 7 bssid 00:e0:20:53:b4:de 49%
HT-MCS15 privacy,short_slottime,wpa2
nwid 0x000000000000000000000000 chan 11 bssid
8a:f7:c7:93:61:a0 47% HT-MCS23
privacy,short_preamble,short_slottime,wpa2
nwid HOME-61AF chan 11 bssid 88:f7:c7:93:61:af 46%
HT-MCS23 privacy,short_slottime,wpa2,wpa1
nwid 0x00000000000000000000000000000000000000000000
chan 6 bssid d0:4d:2c:1c:8e:1d 46% HT-MCS15
privacy,spectrum_mgmt,short_slottime,wpa2
nwid Totalplay-547C chan 3 bssid 04:9f:ca:27:da:64 43%
HT-MCS15 privacy,short_slottime,radio_measurement,wpa2,wpa1
nwid TOTALPLAY_04B743 chan 1 bssid a4:08:f5:04:b7:43
34% 54M privacy,spectrum_mgmt,short_slottime,radio_measurement,wpa1
nwid INFINITUM6CFC_5 chan 100 bssid f4:9e:ef:5f:3f:a7
31% HT-MCS76 privacy,spectrum_mgmt,short_slottime,wpa2
#
# ifconfig iwm0 nwid aglaya wpakey pass up
# ifconfig iwm0
iwm0: flags=8847<UP,BROADCAST,DEBUG,RUNNING,SIMPLEX,MULTICAST> mtu
1500
lladdr e4:b3:18:a4:88:b9
index 1 priority 4 llprio 3
groups: wlan
media: IEEE802.11 autoselect (autoselect mode 11b)
status: no network
ieee80211: nwid aglaya wpakey
0x62ea87bf30259f00edef48071266f42c09d7ce455c785a7655b45feafa078db2
wpaprotos wpa2 wpaakms psk wpaciphers ccmp wpagroupcipher ccmp
#
# dmesg | sed -n '/^root/,$p'
root on sd0a (cc67f9c965a785a3.a) swap on sd0b dump on sd0b
WARNING: / was not properly unmounted
iwm0: hw rev 0x200, fw ver 16.242414.0, address e4:b3:18:a4:88:b9
iwm0: begin active scan
iwm0: received beacon from a4:08:f5:04:b7:43 rssi 23 mode auto
iwm0: end active scan
iwm0: end active scan
iwm0: received beacon from 04:9f:ca:27:da:64 rssi 29 mode auto
iwm0: received beacon from c4:6e:1f:f3:2c:d0 rssi 62 mode auto
iwm0: received beacon from 00:e0:20:53:b4:de rssi 33 mode auto
iwm0: received beacon from d0:4d:2c:1c:8e:1d rssi 31 mode auto
iwm0: received beacon from c4:6e:1f:f3:2c:d0 rssi 63 mode auto
iwm0: received beacon from 00:e0:20:53:b4:de rssi 34 mode auto
iwm0: received beacon from c4:6e:1f:f3:2c:d0 rssi 64 mode auto
iwm0: received beacon from 00:e0:20:53:b4:de rssi 33 mode auto
iwm0: received beacon from f4:9e:ef:5f:3f:a3 rssi 34 mode auto
iwm0: received beacon from 88:f7:c7:93:61:af rssi 31 mode auto
iwm0: received beacon from 8a:f7:c7:93:61:a0 rssi 32 mode auto
iwm0: received beacon from f4:9e:ef:5f:3f:a3 rssi 33 mode auto
iwm0: received beacon from f4:9e:ef:5f:3f:a3 rssi 33 mode auto
iwm0: received beacon from f4:9e:ef:5f:3f:a7 rssi 21 mode auto
iwm0: begin active scan
iwm0: received beacon from a4:08:f5:04:b7:43 rssi 24 mode auto
iwm0: received beacon from 04:9f:ca:27:da:64 rssi 30 mode auto
iwm0: received beacon from c4:6e:1f:f3:2c:d0 rssi 63 mode auto
iwm0: received beacon from d0:4d:2c:1c:8e:1d rssi 31 mode auto
iwm0: received beacon from c4:6e:1f:f3:2c:d0 rssi 63 mode auto
iwm0: received beacon from c4:6e:1f:f3:2c:d0 rssi 64 mode auto
iwm0: received beacon from 00:e0:20:53:b4:de rssi 33 mode auto
iwm0: received beacon from 88:f7:c7:93:61:af rssi 31 mode auto
iwm0: received beacon from f4:9e:ef:5f:3f:a3 rssi 32 mode auto
iwm0: received beacon from 88:f7:c7:93:61:af rssi 31 mode auto
iwm0: received beacon from 8a:f7:c7:93:61:a0 rssi 31 mode auto
iwm0: received beacon from f4:9e:ef:5f:3f:a7 rssi 21 mode auto
iwm0: received beacon from f4:9e:ef:5f:3f:a7 rssi 21 mode auto
iwm0: end active scan
iwm0: end active scan
#
