Hi, Simply remove the intel(4) Xorg driver in the /etc/xorg.conf (or wherever you save your config) and use drm one.
This, however, brings back the issues with unaccelerated vncviewer. Regards, Raf On Wed, Jul 26, 2017 at 07:11:39AM BST, jungle boogie wrote: > Hi All, > > I loaded up the amd64 snapshot that was built at 25-Jul-2017 21:19 on my > Dell Datitude d620 machine, the auto upgrade went without issue and so did > the reboot. > > However, once the system was finished loading, I was stuck at a black screen > with only a small white text cursor bar, not the usual login screen I've > seen in the past couple days. Pressing enter and mashing on the keys didn't > display the graphical login. Disabling xenodm does bring me to the console > login and starting "startx" results in the same behavior with xenodm > enabled. > > Is this is issue with a recent commit or something I've done to my system? > > $ cat .xinitrc > cwm > > > $ cat .xsession-errors > Agent pid 16449 > Identity added: /home/jungle/.ssh/id_ed25519 ([email protected]) > > xterm: cannot load font > "-Misc-Fixed-Bold-o-*-*-13-120-75-75-C-60-ISO10646-1" > > /usr/X11R6/bin/xterm: cannot load font > "-Misc-Fixed-Bold-o-*-*-13-120-75-75-C-60-ISO10646-1" > > Terminated > > > > dmesg: > OpenBSD 6.1-current (GENERIC.MP) #4: Tue Jul 25 21:19:38 MDT 2017 > [email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP > real mem = 3194490880 (3046MB) > avail mem = 3091382272 (2948MB) > mpath0 at root > scsibus0 at mpath0: 256 targets > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf6e60 (62 entries) > bios0: vendor Dell Inc. version "A07" date 12/18/2006 > bios0: Dell Inc. Latitude D620 > acpi0 at bios0: rev 0 > acpi0: TCPA checksum error > acpi0: sleep states S0 S3 S4 S5 > acpi0: tables DSDT FACP HPET APIC ASF! MCFG SLIC TCPA SSDT > acpi0: wakeup devices LID_(S3) PBTN(S4) PCI0(S5) USB0(S0) USB1(S0) USB2(S0) > USB3(S0) EHCI(S0) AZAL(S3) PCIE(S4) RP01(S3) RP02(S4) NIC_(S5) RP04(S3) > RP05(S3) RP06(S3) > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpihpet0 at acpi0: 14318179 Hz > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz, 1997.65 MHz > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,NXE,LONG,LAHF,PERF,SENSOR > cpu0: 4MB 64b/line 16-way L2 cache > cpu0: smt 0, core 0, package 0 > mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges > cpu0: apic clock running at 166MHz > cpu0: mwait min=64, max=64, C-substates=0.2.2.2.2, IBE > cpu1 at mainbus0: apid 1 (application processor) > cpu1: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz, 1997.33 MHz > cpu1: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,NXE,LONG,LAHF,PERF,SENSOR > cpu1: 4MB 64b/line 16-way L2 cache > cpu1: smt 0, core 1, package 0 > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins > acpimcfg0 at acpi0 addr 0xf0000000, bus 0-63 > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus -1 (AGP_) > acpiprt2 at acpi0: bus 3 (PCIE) > acpiprt3 at acpi0: bus 11 (RP01) > acpiprt4 at acpi0: bus 12 (RP02) > acpiprt5 at acpi0: bus 9 (PXP0) > acpiprt6 at acpi0: bus -1 (RP04) > acpiprt7 at acpi0: bus -1 (RP05) > acpiprt8 at acpi0: bus -1 (RP06) > acpicpu0 at acpi0: !C3(100@57 io@0x1016), !C2(500@1 io@0x1014), C1(1000@1 > halt), PSS > acpicpu1 at acpi0: !C3(100@57 io@0x1016), !C2(500@1 io@0x1014), C1(1000@1 > halt), PSS > acpitz0 at acpi0: critical temperature is 126 degC > "*pnp0c14" at acpi0 not configured > acpiac0 at acpi0: AC unit online > acpibat0 at acpi0: BAT0 model "DELL J825J8" serial 1093 type LION oem > "Panasonic" > acpibat1 at acpi0: BAT1 not present > acpibtn0 at acpi0: LID_ > acpibtn1 at acpi0: PBTN > acpibtn2 at acpi0: SBTN > "PNP0F13" at acpi0 not configured > "PNP0303" at acpi0 not configured > acpidock0 at acpi0: GDCK not docked (0) > acpivideo0 at acpi0: VID_ > acpivideo1 at acpi0: VID_ > acpivideo2 at acpi0: VID2 > cpu0: Enhanced SpeedStep 1997 MHz: speeds: 2000, 1667, 1333, 1000 MHz > pci0 at mainbus0 bus 0 > pchb0 at pci0 dev 0 function 0 "Intel 82945GM Host" rev 0x03 > inteldrm0 at pci0 dev 2 function 0 "Intel 82945GM Video" rev 0x03 > drm0 at inteldrm0 > intagp0 at inteldrm0 > agp0 at intagp0: aperture at 0xd0000000, size 0x10000000 > inteldrm0: apic 2 int 16 > inteldrm0: 848x480, 32bpp > wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation) > wsdisplay0: screen 1-5 added (std, vt100 emulation) > "Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured > azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x01: msi > azalia0: codecs: Sigmatel STAC9200, Conexant/0x2bfa, using Sigmatel STAC9200 > audio0 at azalia0 > ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01: msi > pci1 at ppb0 bus 11 > ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x01: msi > pci2 at ppb1 bus 12 > wpi0 at pci2 dev 0 function 0 "Intel PRO/Wireless 3945ABG" rev 0x02: msi, > MoW1, address 00:19:d2:c8:ce:01 > ppb2 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x01: msi > pci3 at ppb2 bus 9 > bge0 at pci3 dev 0 function 0 "Broadcom BCM5752" rev 0x02, BCM5752 A2 > (0x6002): msi, address 00:18:8b:be:b2:3d > brgphy0 at bge0 phy 1: BCM5752 10/100/1000baseT PHY, rev. 0 > uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: apic 2 int 20 > uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: apic 2 int 21 > uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: apic 2 int 22 > uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: apic 2 int 23 > ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 2 int 20 > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev > 2.00/1.00 addr 1 > ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe1 > pci4 at ppb3 bus 3 > cbb0 at pci4 dev 1 function 0 "O2 Micro OZ69[17]2 CardBus" rev 0x40: apic 2 > int 18 > cardslot0 at cbb0 slot 0 flags 0 > cardbus0 at cardslot0: bus 4 device 0 cacheline 0x0, lattimer 0x20 > pcmcia0 at cardslot0 > pcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x01 > pciide0 at pci0 dev 31 function 2 "Intel 82801GBM SATA" rev 0x01: DMA, > channel 0 wired to compatibility, channel 1 wired to compatibility > wd0 at pciide0 channel 0 drive 0: <WDC WD1600BEVS-08RST2> > wd0: 16-sector PIO, LBA48, 152627MB, 312581808 sectors > wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6 > atapiscsi0 at pciide0 channel 1 drive 0 > scsibus1 at atapiscsi0: 2 targets > cd0 at scsibus1 targ 0 lun 0: <TSSTcorp, CDRW/DVD TSL462D, DE01> ATAPI > 5/cdrom removable > cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2 > ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01: SMI > iic0 at ichiic0 > spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM > spdmem1 at iic0 addr 0x52: 2GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM > usb1 at uhci0: USB revision 1.0 > uhub1 at usb1 configuration 1 interface 0 "Intel UHCI root hub" rev > 1.00/1.00 addr 1 > usb2 at uhci1: USB revision 1.0 > uhub2 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev > 1.00/1.00 addr 1 > usb3 at uhci2: USB revision 1.0 > uhub3 at usb3 configuration 1 interface 0 "Intel UHCI root hub" rev > 1.00/1.00 addr 1 > usb4 at uhci3: USB revision 1.0 > uhub4 at usb4 configuration 1 interface 0 "Intel UHCI root hub" rev > 1.00/1.00 addr 1 > isa0 at pcib0 > isadma0 at isa0 > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > pckbc0 at isa0 port 0x60/5 irq 1 irq 12 > pckbd0 at pckbc0 (kbd slot) > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pms0 at pckbc0 (aux slot) > wsmouse0 at pms0 mux 0 > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > uhub5 at uhub1 port 2 configuration 1 interface 0 "Dell product 0xa005" rev > 2.00/50.18 addr 2 > uhub6 at uhub5 port 3 configuration 1 interface 0 "O2 Micro OZ776 Hub" rev > 1.10/1.10 addr 3 > ugen0 at uhub6 port 2 "O2 O2Micro CCID SC Reader" rev 1.10/1.10 addr 4 > vscsi0 at root > scsibus2 at vscsi0: 256 targets > softraid0 at root > scsibus3 at softraid0: 256 targets > root on wd0a (93c2dca4a7f0d791.a) swap on wd0b dump on wd0b > > usbdevs: > Controller /dev/usb0: > addr 1: high speed, self powered, config 1, EHCI root hub(0x0000), > Intel(0x8086), rev 1.00 > port 1 powered > port 2 powered > port 3 powered > port 4 powered > port 5 powered > port 6 powered > port 7 powered > port 8 powered > Controller /dev/usb1: > addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), > Intel(0x8086), rev 1.00 > port 1 powered > port 2 addr 2: full speed, self powered, config 1, product 0xa005(0xa005), > Dell(0x413c), rev 50.18 > port 1 powered > port 2 powered > port 3 addr 3: full speed, power 200 mA, config 1, OZ776 Hub(0x7761), O2 > Micro(0x0b97), rev 1.10 > port 1 powered > port 2 addr 4: full speed, self powered, config 1, O2Micro CCID SC > Reader(0x7762), O2(0x0b97), rev 1.10 > port 3 powered > port 4 powered > Controller /dev/usb2: > addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), > Intel(0x8086), rev 1.00 > port 1 powered > port 2 powered > Controller /dev/usb3: > addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), > Intel(0x8086), rev 1.00 > port 1 powered > port 2 powered > Controller /dev/usb4: > addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), > Intel(0x8086), rev 1.00 > port 1 powered > port 2 powered >
