writing minirootfs to SD card boot and installs as usual but not boot from usb flash drive and returns the same errors as previously e-mail
( enter in loop ) 2017-07-31 20:15 GMT-03:00 R0me0 *** <[email protected]>: > I wrote minirootfs as usual directly to usb flash drive > > minirootfs61.fs 31-Jul-2017 03:11 22020096 > > > > U-Boot> boot > Card did not respond to voltage select! > mmc_init: -95, time 24 > > USB device 0: > Device 0: Vendor: Kingston Rev: 1.00 Prod: DataTraveler 2.0 > Type: Removable Hard Disk > Capacity: 14762.4 MB = 14.4 GB (30233588 x 512) > ... is now current device > Scanning usb 0:1... > Found EFI removable media binary efi/boot/bootaa64.efi > reading efi/boot/bootaa64.efi > 75732 bytes read in 75 ms (985.4 KiB/s) > ## Starting EFI application at 01000000 ... > Card did not respond to voltage select! > mmc_init: -95, time 24 > Found 0 disks > BS->LocateHandle() returns 0 > "Synchronous Abort" handler, esr 0x02000000 > ELR: 39b3ecfc > LR: 39b421ec > x0 : 0000000000000000 x1 : 000000003afec000 > x2 : 0000000000000002 x3 : 000000000000003f > x4 : 0000000000000010 x5 : 0000000000000000 > x6 : 000000003af96558 x7 : 0000000039b3efa8 > x8 : 0000000039b4c8ac x9 : 0000000039b3e39c > x10: 000000003ab4fa70 x11: 000000003ab4faf0 > x12: 000000003ab4fbc0 x13: 0000000039b4d850 > x14: 000000003ab4fd6c x15: 00000000ffffffff > x16: 0000000000004110 x17: ad7bd9a555f85ec4 > x18: 0000000000000000 x19: 0000000039b4db12 > x20: 0000000039b4c920 x21: 0000000000000001 > x22: 0000000039a3d030 x23: 0000000039b4cb00 > x24: 0000000039b4c920 x25: 0000000000000200 > x26: 000000003afa76b0 x27: 0000000039b3e148 > x28: 0000000000000000 x29: 000000003ab4fcd0 > > Resetting CPU ... > > resetting ... > > > > >
