Fixed :)
Thanks
2017-08-22 6:04 GMT-03:00 Jonathan Gray <[email protected]>:
> On Tue, Aug 22, 2017 at 12:27:55PM +1000, Jonathan Gray wrote:
> > On Mon, Aug 21, 2017 at 06:28:16PM -0300, R0me0 *** wrote:
> > > Hello,
> > >
> > > Wrote miniroot62.fs to usb stick as usual, boots and installs
> > >
> > > ( tried with miniroot from ftp.openbsd.org and ftp.hostserver.de )
> > >
> > > miniroot62.fs 21-Aug-2017 03:10 22020096
> > >
> > >
> > > But after reboot, rpi3 does not initialize. Just boot if I rewrite
> miniroot
> > > to usb sitck
> > >
> > >
> > >
> > > Relinking to create unique kernel...done.
> > >
> > > CONGRATULATIONS! Your OpenBSD install has been successfully completed!
> > > To boot the new system, enter 'reboot' at the command prompt.
> > > When you login to your new system the first time, please read your mail
> > > using the 'mail' command.
> > >
> > > # reboot
> > > syncing disks... done
> > > rebooting...
> >
> > scan_dmesg does not seem to work correctly for this.
> >
> > # sed -n 's/^mainbus0 at root: \(.*\)$/\1/p' /var/run/dmesg.boot
> > Raspberry Pi 3 Model B Rev 1.2
> >
> > but scan_dmesg sorts the words of the string so that
> >
> > $(scan_dmesg 's/^mainbus0 at root: \(.*\)$/\1/p') gives
> >
> > "1.2 3 B Model Pi Raspberry Rev"
> >
> > The next snapshot will include a revised version of the diff
> > to use $(sysctl -n hw.product).
>
> 22nd August snapshot should work. Thanks for the report.
>
> >
> > armv7 should be changed to use the same.
> >
> > Index: miniroot/Makefile
> > ===================================================================
> > RCS file: /cvs/src/distrib/arm64/miniroot/Makefile,v
> > retrieving revision 1.4
> > diff -u -p -r1.4 Makefile
> > --- miniroot/Makefile 7 May 2017 12:00:12 -0000 1.4
> > +++ miniroot/Makefile 22 Aug 2017 02:25:34 -0000
> > @@ -65,6 +65,8 @@ do_files:
> > cp /usr/mdec/BOOTAA64.EFI ${MOUNT_POINT}/efi/boot/bootaa64.efi
> > echo bootaa64.efi > ${MOUNT_POINT}/efi/boot/startup.nsh
> > echo
> > 'arm_control=0x200\nenable_uart=1\ndevice_tree_address=0x100\nkernel=u-boot.bin'
> > ${MOUNT_POINT}/config.txt
> > + dd if=${PUBOOT}/pine64_plus/u-boot-sunxi-with-spl.bin \
> > + of=${VND_CDEV} bs=1024 seek=8
> >
> > rd_setup:
> > dd if=/dev/zero of=${IMAGE} bs=512 count=${NBLKS}
> > Index: ramdisk/Makefile
> > ===================================================================
> > RCS file: /cvs/src/distrib/arm64/ramdisk/Makefile,v
> > retrieving revision 1.2
> > diff -u -p -r1.2 Makefile
> > --- ramdisk/Makefile 18 Feb 2017 02:01:53 -0000 1.2
> > +++ ramdisk/Makefile 22 Aug 2017 02:25:34 -0000
> > @@ -18,6 +18,7 @@ DISKTYPE= rdroot
> > MAKEFSARGS_RD= -o disklabel=${DISKTYPE},minfree=0,density=4096
> >
> > DIRS=\
> > + pine64 \
> > rpi
> >
> > .ifndef DESTDIR
> > Index: ramdisk/install.md
> > ===================================================================
> > RCS file: /cvs/src/distrib/arm64/ramdisk/install.md,v
> > retrieving revision 1.6
> > diff -u -p -r1.6 install.md
> > --- ramdisk/install.md 28 Jul 2017 18:15:44 -0000 1.6
> > +++ ramdisk/install.md 22 Aug 2017 02:25:34 -0000
> > @@ -38,23 +38,35 @@ MOUNT_ARGS_msdos="-o-l"
> > md_installboot() {
> > local _disk=/dev/$1 _mdec _plat
> >
> > + case $(sysctl -n hw.product) in
> > + *Pine64*) _plat=pine64;;
> > + *'Raspberry Pi'*) _plat=rpi;;
> > + esac
> > +
> > # Mount MSDOS partition, extract U-Boot and copy UEFI boot program
> > mount ${MOUNT_ARGS_msdos} ${_disk}i /mnt/mnt
> > mkdir -p /mnt/mnt/efi/boot
> > cp /mnt/usr/mdec/BOOTAA64.EFI /mnt/mnt/efi/boot/bootaa64.efi
> > echo bootaa64.efi > /mnt/mnt/efi/boot/startup.nsh
> >
> > - _plat=rpi
> > _mdec=/usr/mdec/$_plat
> >
> > - cp $_mdec/{bootcode.bin,start.elf,fixup.dat,*.dtb} /mnt/mnt/
> > - cp $_mdec/u-boot.bin /mnt/mnt/
> > - cat > /mnt/mnt/config.txt<<-__EOT
> > - arm_control=0x200
> > - enable_uart=1
> > - device_tree_address=0x100
> > - kernel=u-boot.bin
> > - __EOT
> > + case $_plat in
> > + pine64)
> > + dd if=$_mdec/u-boot-sunxi-with-spl.bin of=${_disk}c \
> > + bs=1024 seek=8 >/dev/null 2>&1
> > + ;;
> > + rpi)
> > + cp $_mdec/{bootcode.bin,start.elf,fixup.dat,*.dtb}
> /mnt/mnt/
> > + cp $_mdec/u-boot.bin /mnt/mnt/
> > + cat > /mnt/mnt/config.txt<<-__EOT
> > + arm_control=0x200
> > + enable_uart=1
> > + device_tree_address=0x100
> > + kernel=u-boot.bin
> > + __EOT
> > + ;;
> > + esac
> > }
> >
> > md_prep_fdisk() {
> > Index: ramdisk/list
> > ===================================================================
> > RCS file: /cvs/src/distrib/arm64/ramdisk/list,v
> > retrieving revision 1.4
> > diff -u -p -r1.4 list
> > --- ramdisk/list 8 Jul 2017 15:42:46 -0000 1.4
> > +++ ramdisk/list 22 Aug 2017 02:25:34 -0000
> > @@ -124,4 +124,6 @@ COPY /usr/local/share/raspberrypi-firmwa
> > COPY /usr/local/share/raspberrypi-firmware/boot/fixup.dat
> usr/mdec/rpi/fixup.dat
> > COPY /usr/local/share/u-boot/rpi_3/u-boot.bin usr/mdec/rpi/u-boot.bin
> >
> > +COPY /usr/local/share/u-boot/pine64_plus/u-boot-sunxi-with-spl.bin
> usr/mdec/pine64/u-boot-sunxi-with-spl.bin
> > +
> > TZ
> >
>
