Had eth in cnmac0 disconnected (was intending to install from cnmac1) and got here:
Let's upgrade the sets! Location of sets? (disk http nfs or 'done') [http] HTTP proxy URL? (e.g. 'http://proxy:8080', or 'none') [none] (Unable to get list from ftp.openbsd.org, but that is OK) HTTP Server? (hostname or 'done') [ftp.eu.openbsd.org] Server directory? [pub/OpenBSD/snapshots/octeon] cnmac0: unexpected wqe port 2, should be 0 word0: 0x66f4000000000000 word1: 0x0156080000ff0000 panic: wqe error syncing disks... 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 giving up then u-boot kicked in. Second attempt to run same bsd.rd failed again, similarly even though cnmac0 was decently connected this time, that session below. Complete first session here: Octeon ubnt_e100# run upgcmd reading bsd.rd ......................... .................. 8794649 bytes read argv[2]: coremask=0x3 argv[3]: rootdev=/dev/sd0 ELF file is 64 bit Allocating memory for ELF segment: addr: 0xffffffff81000000 (adjusted to: 0x1000000), size 0x876150 Allocated memory for ELF segment: addr: 0xffffffff81000000, size 0x876150 Processing PHDR 0 Loading 7fa0d0 bytes at ffffffff81000000 Clearing 7c080 bytes at ffffffff817fa0d0 ## Loading Linux kernel with entry point: 0xffffffff81000000 ... Bootloader: Done loading app on coremask: 0x3 bootmem desc 0x24108 version 3.0 avail phys mem 0x00000000001004e0 - 0x0000000000fffd40 avail phys mem 0x0000000001876150 - 0x0000000008100000 avail phys mem 0x0000000008100010 - 0x000000000fffdc00 avail phys mem 0x0000000410000000 - 0x000000041ff00000 Total DRAM Size 0x0000000020000000 mem_layout[0] page 0x0000000000000041 -> 0x00000000000003FF mem_layout[1] page 0x000000000000061E -> 0x0000000000002040 mem_layout[2] page 0x0000000000002041 -> 0x0000000000003FFF mem_layout[3] page 0x0000000000104000 -> 0x0000000000107FC0 boot_desc->argv[0] = bootoctlinux boot_desc->argv[1] = $loadaddr boot_desc->Initial setup done, switching console. boot_desc->desc_ver:7 boot_desc->desc_size:400 boot_desc->stack_top:0 boot_desc->heap_start:0 boot_desc->heap_end:0 boot_desc->argc:4 boot_desc->flags:0x5 boot_desc->core_mask:0x3 boot_desc->dram_size:512 boot_desc->phy_mem_desc_addr:0 boot_desc->debugger_flag_addr:0xa44 boot_desc->eclock:500000000 boot_desc->boot_info_addr:0x100210 boot_info->ver_major:1 boot_info->ver_minor:2 boot_info->stack_top:0 boot_info->heap_start:0 boot_info->heap_end:0 boot_info->boot_desc_addr:0 boot_info->exception_base_addr:0x1000 boot_info->stack_size:0 boot_info->flags:0x5 boot_info->core_mask:0x3 boot_info->dram_size:512 boot_info->phys_mem_desc_addr:0x24108 boot_info->debugger_flags_addr:0 boot_info->eclock:500000000 boot_info->dclock:266000000 boot_info->board_type:20002 boot_info->board_rev_major:2 boot_info->board_rev_minor:14 boot_info->mac_addr_count:3 boot_info->cf_common_addr:0 boot_info->cf_attr_addr:0 boot_info->led_display_addr:0 boot_info->dfaclock:0 boot_info->config_flags:0x8 Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. Copyright (c) 1995-2017 OpenBSD. All rights reserved. https://www.OpenBSD.org OpenBSD 6.2-current (RAMDISK) #0: Fri Nov 24 07:00:40 UTC 2017 visa@octeon:/usr/src/sys/arch/octeon/compile/RAMDISK real mem = 536870912 (512MB) avail mem = 520863744 (496MB) mainbus0 at root cpu0 at mainbus0: CN50xx CPU rev 0.1 500 MHz, Software FP emulation cpu0: cache L1-I 32KB 4 way D 16KB 64 way, L2 128KB 8 way clock0 at mainbus0: int 5 iobus0 at mainbus0 simplebus0 at iobus0: "soc" octciu0 at simplebus0 cn30xxsmi0 at simplebus0 com0 at simplebus0: ns16550a, 64 byte fifo com0: console dwctwo0 at iobus0 base 0x1180068000000 irq 56 usb0 at dwctwo0: USB revision 2.0 uhub0 at usb0 configuration 1 interface 0 "Octeon DWC2 root hub" rev 2.00/1.00 addr 1 cn30xxgmx0 at iobus0 base 0x1180008000000 cnmac0 at cn30xxgmx0: RGMII, address dc:9f:db:28:59:1d atphy0 at cnmac0 phy 7: AR8035 10/100/1000 PHY, rev. 2 cnmac1 at cn30xxgmx0: RGMII, address dc:9f:db:28:59:1e atphy1 at cnmac1 phy 6: AR8035 10/100/1000 PHY, rev. 2 cnmac2 at cn30xxgmx0: RGMII, address dc:9f:db:28:59:1f atphy2 at cnmac2 phy 5: AR8035 10/100/1000 PHY, rev. 2 umass0 at uhub0 port 1 configuration 1 interface 0 "SanDisk Ultra" rev 2.10/1.00 addr 2 umass0: using SCSI over Bulk-Only scsibus0 at umass0: 2 targets, initiator 0 sd0 at scsibus0 targ 1 lun 0: <SanDisk, Ultra, 1.00> SCSI4 0/direct removable serial.07815581471103115165 sd0: 14832MB, 512 bytes/sector, 30375936 sectors boot device: sd0 root on rd0a swap on rd0b dump on rd0b WARNING: No TOD clock, believing file system. WARNING: CHECK AND RESET THE DATE! erase ^?, werase ^W, kill ^U, intr ^C, status ^T Welcome to the OpenBSD/octeon 6.2 installation program. (I)nstall, (U)pgrade, (A)utoinstall or (S)hell? u At any prompt except password prompts you can escape to a shell by typing '!'. Default answers are shown in []'s and are selected by pressing RETURN. You can exit this program at any time by pressing Control-C, but this can leave your system in an inconsistent state. Terminal type? [vt220] Available disks are: sd0. Which disk is the root disk? ('?' for details) [sd0] Checking root filesystem (fsck -fp /dev/sd0a)...OK. Mounting root filesystem (mount -o ro /dev/sd0a /mnt)...OK. Force checking of clean non-root filesystems? [no] fsck -p bc6f9095e838ccff.l...OK. fsck -p bc6f9095e838ccff.d...OK. fsck -p bc6f9095e838ccff.f...OK. fsck -p bc6f9095e838ccff.g...OK. fsck -p bc6f9095e838ccff.h...OK. fsck -p bc6f9095e838ccff.k...OK. fsck -p bc6f9095e838ccff.j...OK. fsck -p bc6f9095e838ccff.e...OK. /dev/sd0a (bc6f9095e838ccff.a) on /mnt type ffs (rw, local) /dev/sd0l (bc6f9095e838ccff.l) on /mnt/home type ffs (rw, local, nodev, nosuid) /dev/sd0d (bc6f9095e838ccff.d) on /mnt/tmp type ffs (rw, local, nodev, nosuid) /dev/sd0f (bc6f9095e838ccff.f) on /mnt/usr type ffs (rw, local, nodev) /dev/sd0g (bc6f9095e838ccff.g) on /mnt/usr/X11R6 type ffs (rw, local, nodev) /dev/sd0h (bc6f9095e838ccff.h) on /mnt/usr/local type ffs (rw, local, nodev, wxallowed) /dev/sd0k (bc6f9095e838ccff.k) on /mnt/usr/obj type ffs (rw, local, nodev, nosuid) /dev/sd0j (bc6f9095e838ccff.j) on /mnt/usr/src type ffs (rw, local, nodev, nosuid) /dev/sd0e (bc6f9095e838ccff.e) on /mnt/var type ffs (rw, local, nodev, nosuid) Let's upgrade the sets! Location of sets? (disk http nfs or 'done') [http] HTTP proxy URL? (e.g. 'http://proxy:8080', or 'none') [none] (Unable to get list from ftp.openbsd.org, but that is OK) HTTP Server? (hostname or 'done') [ftp.eu.openbsd.org] Server directory? [pub/OpenBSD/snapshots/octeon] cnmac0: unexpected wqe port 2, should be 0 word0: 0x66f4000000000000 word1: 0x0156080000ff0000 panic: wqe error syncing disks... 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 giving up System restart. ? Looking for valid bootloader image.... Jumping to start of image at address 0xbfc80000 U-Boot 1.1.1 (UBNT Build ID: 4493936-g009d77b) (Build time: Sep 20 2012 - 15:48:51) BIST check passed. UBNT_E100 r1:2, r2:14, serial #: DC9FDB28591D Core clock: 500 MHz, DDR clock: 266 MHz (532 Mhz data rate) DRAM: 512 MB Clearing DRAM....... done Flash: 4 MB Net: octeth0, octeth1, octeth2 USB: (port 0) scanning bus for devices... 1 USB Devices found scanning bus for storage devices... #### ERROR: USB bulk polling timed out! #### ERROR: USB bulk polling timed out! #### ERROR: USB bulk polling timed out! #### ERROR: USB bulk polling timed out! #### ERROR: USB bulk polling timed out! #### ERROR: USB bulk polling timed out! Device 0: Vendor: SanDisk Prod.: Ultra Rev: 1.00 Type: Removable Hard Disk Capacity: 14832.0 MB = 14.4 GB (30375936 x 512) 0 =================================== second attempt, with Eth in, in case link detection had a bug or so: Available disks are: sd0. Which disk is the root disk? ('?' for details) [sd0] WARNING: /mnt was not properly unmounted Checking root filesystem (fsck -fp /dev/sd0a)...OK. Mounting root filesystem (mount -o ro /dev/sd0a /mnt)...OK. Force checking of clean non-root filesystems? [no] yes fsck -fp bc6f9095e838ccff.l...OK. fsck -fp bc6f9095e838ccff.d...OK. fsck -fp bc6f9095e838ccff.f...OK. fsck -fp bc6f9095e838ccff.g...OK. fsck -fp bc6f9095e838ccff.h...cnmac0: unexpected wqe port 2, should be 0 word0: 0xafe4000000000000 word1: 0x0156080000ff0000 panic: wqe error syncing disks... done System restart. Looking for valid bootloader image.... Jumping to start of image at address 0xbfc80000 ======================================= Booting the bsd.mp from the same snapshot works fine though: OpenBSD 6.2-current (GENERIC.MP) #0: Fri Nov 24 06:28:06 UTC 2017 visa@octeon:/usr/src/sys/arch/octeon/compile/GENERIC.MP real mem = 536870912 (512MB) avail mem = 523927552 (499MB) mainbus0 at root cpu0 at mainbus0: CN50xx CPU rev 0.1 500 MHz, Software FP emulation cpu0: cache L1-I 32KB 4 way D 16KB 64 way, L2 128KB 8 way cpu1 at mainbus0: CN50xx CPU rev 0.1 500 MHz, Software FP emulation cpu1: cache L1-I 32KB 4 way D 16KB 64 way, L2 128KB 8 way ..and boots the rest of the system nice and fine -- -"Any girl with sense love those dead presidents" Quireboys - Debbie
signature.asc
Description: OpenPGP digital signature
