Hi,
I installed OBSD 6.2 release from http/https (can't remember exactly) mirror
downloads on USB 2.0 Flash Stick running on my i368 box
after downloading on Windows 7 - 32 bit computer i checked the SHA256 sum for
both the install62.fs file on mirror server and after downloading on my local
hard drive and both were exactly compatible.
I used 2 flash stick for the process...one contain the install62.fs installer
image raw burned into the usb stick (USB 2.0 - 16 GB TeamGroup Brand) using
RUFUS free open source tool on a Windows 7 service pack 1 OS
and the other usb flash stick (Kingston 16 GB USB 2.0) contain only the
install62.fs as it is...to copy from it the File Sets during the installation.
after installation completed successfully ...
i typed "reboot" at the command prompt ..
then removed the extra usb flash stick (previously containing install62.fs only
for providing file sets)
and unplugged hard drive (WD brand) power and data Sata cables...
and only left with the USB flash stick that has installation completed
successfuly on it (Kingston 16 GB USB 2.0)
and after reboot and showing some data on the consol/monitor...
i got the following EXACT Error (i wrote it down on a paper):
first i noticed this line on console:
acpidump: RSDT entry 3 is corrupt
then i got this at the end:
OpenBSD/i386 (systemname.domain.com) (ttyc0)
login: uvm_fault (0xd0c36b74, 0xd2fd5000, 0, 1) -> e ( first booting try )
login: uvm_fault (0xd0c36b74, 0xd2fea000, 0, 1) -> e ( 2nd booting try )
login: uvm_fault (0xd0c36b74, 0xd2fe8000, 0, 1) -> e ( 3rd booting try )
kernel: page fault trap, code=0
stopped at i915_gem_pwrite_ioctl+0x621: mov1 0x34(%eax),%eax
ddb{1}>
ddb{0}> (with another booting try)
I tried to shutdown and reboot from the USB stick few times and i always get
the same error...
p.s:
While the installation process i choosed to turn off SSHD by typing "no" to the
question.
also while the installation process i choosed to use all the available space on
USB stick (sd1) for OpenBSD
without manually assigning partitions
also i installed ALL file sets packages/files
my hardhware specs:
i386 Desktop PC
32 Bit System
Intel Processor Dual Core 2.8 GHz
Physical Memory: Single 2 GB RAM (DDR3 i think not sure)
MotherBoard : G41 Series
VGA, Sound, Lan ... All three are Built-in Motherboard
Normal wired Keyboard,Mouse
USB: Two USB 2.0 Flash Sticks ( 16 GB Both)
What could be the possible cause of this issue, and how to fix it easily?
Thanks
-----------------------------------------------------
Sarah
